Zero fill and max length VC7 Compile to WebDynpro not working
Hi,
i try to call Customer get list and set the attributes zero fill and max length to the input table form.
But the user has to put in the exact length and zero filled.
Any idea what to do
Thanks
Uwe
Hi Uwe,
if I understand your question you need something like an alpha conversion.
You can use a formula, therefore is an textfunction called LPAD(text,len,pad).
You can use it like this:
LPAD(@yourtext, 18, "0")
@yourtext contains the input, the length is 18 and filling values is 0 like a alpha conversion.
Best Regards,
Marcel
Similar Messages
-
Zero Fill and Upper Case in Visual Composer not working
Hello,
I am building my first VC application and hit a small wall from get go. When I create input fields and set text formats for one to have "Zero Fill" and for the other one "Upper Case" they do not seem to work properly.
Zero Fill does not work at all. I set this format and also set max length as 10 to be used as input for customer account #. But it does not perform conversion. When I call a BAPI to get customer list, if I enter 0000000100 it works. When I enter 100 it does not work. Thus "Zero Fill" does not take effect.
"Upper case" works but only after refresh. If I enter ac10 as company code and then click submit it does not work. However if after entering ac10 I press enter and then submit, it work.
Does anyone have any info on how to deal with this? We are using VC 7.0
Thanks,
AlexHi ALex,
Now I got your problem. I suggest a solution for it.
Go to the design board of VC.
I think you have an Input Form that contains the input fields and the Submit button. There will be a link named "submit"between the Input Form & the Data Service(say BAPI). Click on the submit link, you will get the Input Fields & Assigned values of the Input Form at the bottom right side. Go to the Assigned Value of the particular field & apply a formula like UPPER(@inputfield). So now whatever case you give in the inputfield, it is converted to UPPER case before Submiting the values.Keep the Upper Case option checked at the formatting tab of the Input field properties, this will help to display the value in Upper case.
For eg, BAPI_BANK_GETLIST, the input fields are BANK_CTRY & MAX_ROWS.
Make the assigned value of bank_ctry as UPPER(@BANK_CTRY), you can get this with the help of formula.
This will solve your problem.
Regards,
Shemim -
en
I´ll check the messages. Elements 4.0.
Peter
9 dec 2014 kl. 18.44 skrev Jeff A Wright:
I have an I-mac with Max OS X vers. 10.6.8. Have tried to install both an old Photoshop 7.0 and an Photoshop Elements but it does not work. 7.0 I bought many years ago end the Elements came with a Canon scanner. What to do? Regards Peter Lindgren
created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Peter Lindgren do you receive any specific error messages when you attempt to install Photoshop 7 or Photoshop Elements? What version of Photoshop Elements are you installing?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6999366#6999366 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6999366#6999366
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?
IF it is a manufacturing defect and you bought the device from Apple or an authorized Apple retailer, then take it into Apple.
-
I am signed into the App Store on my iphone 4 and one of my apps need updating and my brother is signed into it because I didn't have any credit to make an ID so he signed in so I could download apps but its like its locked to his Apple ID I have tried signing out and turning my phone off its just not working please help.
Apps are locked to the Apple ID that was used to download them. You will have to sign in as your brother in order to update it.
-
I'm trying to connect my iPad to my tv so that I can mirror whatever is on my iPad. I want to stream movies online and watch on the tv. I have the digital av adapter and an hdmi cable but it's not working. Any tips ?
If this is an iPad 1, it won't mirror, but it will still output video from the 30 Pin dock connector.
If your new TV has a conventional VGA in and stereo inputs you can try this connector.
http://store.apple.com/us/product/MC748ZM/A/apple-composite-av-cable?fnode=3a
I used to stream video from both Netflix and YouTube and from my Mac using iTunes sharing through my iPad then with this connector plug into my iPad and TV.
It won't be high resolution, but it will get you picture from iPad to TV.
Good Luck. -
Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga
If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.
-
I updated my ad to iOS 6 and now my App Store app does not work, how can I get it back
I updated my iPad 2 with the latest iOS 6 and now my App Store application does not work right. The only part that does work is the genius, and the purchased, but I cannot search for any new apps now have the categories come up. I don't know how else to search for apps, and I don't know how to download this as it was pre installed.
Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off". -
Firefox did an automatic update to 6.01, and now my middle mouse button is not working in the browser. It doesn't close tabs, it doesn't open new tabs by middle clicking a link, it doesn't allow me to middle click to scroll the page..
[BUG FIXED, see "EDIT 2" at the end of my post]
I'm on Firefox 3.6.21, and I got this problem today after a Greasemonkey update (To version 0.9.10, apparently).
Disabling Greasemonkey solved the problem, and re-enabling it reproduced the problem (middle-clicking links to open in new tab did not work, merely highlighted the link).
I should also note that while Greasemonkey was enabled and the bug was affecting me, Ctrl+Click to open links in new tabs was also broken.
I hope this helps!
EDIT: It appears this is a known incompatibility/conflict bug between current versions of Greasemonkey and Tab Mix Plus. Read more here:
https://github.com/greasemonkey/greasemonkey/issues/1406
EDIT 2: GREASEMONKEY HAS NOW BEEN UPDATED with a workaround to fix the problem. Go to https://addons.mozilla.org/en-US/firefox/addon/greasemonkey/versions/ to install the update manually. It hasn't been reviewed by Mozilla yet, so it won't be an automatic update for another day or two. All credit to "cannonfodder" below for noticing this; please mark his post as helpful! -
what key(s) do it type to change language from english to other? i am writing a story in dual languages. I was told to click command and space bar together but it is not working.
Command Spacebar opens Spotlight as you have found out. If you want to change languages you need to say what app you are using to write the story in, I'm guessing you are using Pages or MS Word. If that's the case
Pages: Open Inspector - Click the T tab - Click Language and change your language.
MS Word: Tools Menu - Language - Choose your language. -
Last night I bought Adobe XI Pro and this morning the serial number does not work.
Last night I bought Adobe XI Pro and this morning the serial number does not work. [removed by moderator]
You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
Here are some links to help make contact:
http://www.adobe.com/support/chat/ivrchat.html
http://www.adobe.com/support/download-install/supportinfo/ -
My MacBook Pro 17" early 2011(built March) and my new OCZ sata III 6G are not working together, when is Apple going to admit there is a problem with the Intel's 6 Series Chipset. In System Information it says "Link Speed: 6 Gigabit" which is sata III and in my MacBook Pro it does not work.
Now MacBook Pro 17" early 2011 built May onward do not have this problem it was fixed in the Intel's 6 Series Chipset. (So there is a problem). Cam I have my MacBook Pro fixed please.After biting the bullet and ordering more RAM, my computer now is working a ton better. So that must have been the main issue. With 8 GB RAM, I can now even run Parallels fluidly (better than my work PC!) where before simple things like logging in to my MBP after reboot could take forever.
The place I went to had several other people getting RAM upgrades at the same time as me, so between this and other comments I've seen in discussions here and elsewhere on the Internets, I take it to mean that either Apple should bump up the base RAM on its new machines, and/or stop charging so much for additional RAM.
I refused to believe a Pro machine bought with Lion installed would come with too little RAM for light to medium usage, but it was apparently the case. I'll mark this as a correct answer and hope some other poor soul will come across this thread and be helped by it. -
I have brought a iPhone 5s and installed software but my bluetooth is not working. Please help me
What are you trying to connect the iPhone to and what is happening when you try?
-
Help....
Updated to 10.6.8 and HP F2100 and D2400 Printers stopped working.
Restored 10.6.7 and printers from Install CD's but not working.
Same with F2100 scanner
Am I glad I kept Windows desktop as without it I would be scre**ed now
What is going on with this latest update as its like a return to Windows with things crashing or hanging up every few minutes????
On a MacBook Air that has not been updated everything still works so what has 10.6.8 done and why won't the restore to 10.6.7 work?
SteveNone of those things you mentioned were what I suggested.
I'm guessing the "ctrl click in printer preferences" means you Reset the Printing System?
If so, that is what I would have suggested if deleting it by selecting the ( - ) button and then adding it with the ( + ) button.
But, if HP has a fix, it likely needs to update its drivers. -
This has happened doing the latest software update. I think I accidentally deleted iTunes before doing the latest update in trying to make room on the phone when it came up with limited space.
My iPhone is locked with the connect to iTunes logo on screen. I have connected and trying to restore but it is not working. I have turned it on and off but to no avail.
The restore says two hours to down load. Has anyone else had this problem.iOS: Unable to update or restore
Maybe you are looking for
-
Mid-2011 Macbook Air with very slow wifi yet with OSX 10.9.1
Yes, I am opening yet another topic on this pretty old issue because I am too confused with all that I have read so far (as also have not found a recent case similar to mine). I have a mid-2011 Macbook Air i5 13'. My home wireless network works just
-
Actual Periodic reposting of Cost center to PM order
Hi , My requirement is to have some periodic cycle to repost certain cost from Cost center to the Plant Maintenance order. When i tried to create distribution cycle or Actual periodic reposting cycle , i get an error message Business transaction for
-
I have a question to combine 1 page from 2 working pages. There are Email List and Outgoing page in the application. http://apex.oracle.com/pls/otn/f?p=27609:2:3081278366115432::NO In Email List: The form inserted information to database. In Outgoing
-
Does anyone know why this refresh is going to take four days? Is this going to be the introduction of version 15?
-
Hi, I have a table with 100 million records, I need to take an export of that table and import into different database...how much time it will take for this?? -GK