A newbie question about external sites authntication

Hello
i am wondering if i can log in a site like yahoo mail across portal without external application or something
i heard it can be done through web clipping portlet
i mean to sign me in automaticly into yahoo mail for example when i log into portal
thanks a lot for your time

Hi,
Yes you can do that in favorites. Try creating favorites portlet it will ask for your userid and password.
After creating the favorites once you click on the link it will take you directly into the yahoomail box.
Regards,
Vijay.B

Similar Messages

Two basic, related questions about external HDs and trashing/erasing

I have a couple of questions about using an external hard drive that I can't seem to get answered by surfing around. They'll probably seem stupid and basic, but ... Here they are:
1. When you drag a file from your external hard drive to the trash, does that file actually transfer to the main hard drive's trash, and thus the main hard drive? For instance, say I'm deleting a 4 GIG file. Will I temporarily add 4 GIGs to my main drive in the process of deleting it?
2. With a multipartitioned ext. drive, can you erase the contents of a single partition with the disk utility, thus bypassing having to drag-trash everything on that partition?
Thanks.
G5 iMac Mac OS X (10.4.2) Powerbook (10.4.6)

1. No. The files are moved to an invisible .Trash directory on the external volume. No copying of data takes place between volumes when you move stuff to the trash.
2. Yes. You can use Disk Utility to erase or securely erase just a single Volume on a disk, leaving the other volumes unaffected. Simply click on the name of the Volume in the left pane of Disk Utilitly, click on the Erase tab in the right pane, and choose the options you want for erasing the volume.

Question about external displays.

Just curious about external display use with the macbook.
I want to link up using DVI to DVI but I recently read that my external display will only show the same as the macbook display, and that i cant use the macbook display, and the external display as two seperate screens? but i read its possible to do on the macbook pro. Is this correct?

I don't normally use my macbook with my primary display, but I have tried it out.
I hooked it up via vga, rather than dvi though.
It worked fine, but defaulted to mirrored. There is an option in the settings to disable mirroring, and use the macbook as the primary and the external as the secondary.
I haven't found any way to swap them, and have the macbook as the secondary display.
The management of the screens was pretty cool though. You can drag and drop the screens so their relative position is set up how you want it (over/under, left/right, etc).
hope that this helps...
-jamie
MacBook 2.0GHz (white) Mac OS X (10.4.7)

Newbie Question about FM 8 and Acrobat Pro 9

Hello:
I have some dcouments that I've written in FM v8.0p277. I print them to PDF so that I can have a copy to include on a CD and I also print some hard copies.
My newbie question is whether there is a way to create a PDF for hard copy where I mainitain the colors in photos and figures but that the text that is hyperlinked doesn't appear as blue. I want to keep the links live within the soft copy. Is there something I can change within Frame or with Acrobat?
TIA,
Kimberly

Kimberly,
How comes the text is blue in the first place? I guess the cross-reference formats use some character format which makes them blue? There are many options:
Temporarily change the color definition for the color used in the cross-reference format to black.
Temporarily change the character format to not use that color.
Temporarily change the cross-reference definition to not used that character format.
Whichever method you choose, I would create a separate document with the changed format setting and import those format into your book, create the PDF and then import the same format from the official template.
- Michael

Newbie question about loading servlets on tomcat

I have what is probably a very basic question about loading simple servlets on to tomcat to test its installation. I have followed instructions from numerous tutorials to the letter but still I can't get it to work.
I have installed tomcat on win2k in c:\tomcat. I set up the jdk, environment vars (JAVA_HOME, CATALINA_HOME, TOMCAT_HOME) which all point at the correct dirs. I can compile a servlet without errors. I can also place a test jsp and html file into the root directory and they both work fine.
However, now I am trying a test servlet and no matter what I do it gives me a 404. I have a servlet class file called "HelloServlet.class" which I placed into the %install_dir%\webapps\ROOT\WEB-INF\classes directory. I try to reference it using this url:
http://localhost/servlet/HelloServlet
Tomcat is configured to use port 80 and has been restarted after adding the servlet class file. Does anyone have a clue why this is not working for me?
Many thanks
Marc

You have to add in the web.xml file that it is in the WEB-INF dir, the information about your servlet. An example:
<web-app>
<servlet>
<servlet-name>HelloServlet</servlet-name>
<servlet-class>HelloServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>HelloServlet</servlet-name>
<url-pattern>/HelloServlet</url-pattern>
</servlet-mapping>
</web-app>

Newbie question about saving files

Hi all,
A newbie question here, and maybe it is a dumb question, but I can't get my head around this and sofar found no answer in the forums here.
When I save a file on my macbook, I can only save it to "top" folders.
What I mean is I try to save a file for instance to documents/worddocs/lyrics just to say something, then I have to save the file first to documents, and the move it to the lyrics folder via finder or move it to :worddocs folder and then move it again to the lyrics folder. Hope you still get my drift here
Is there a way to just save it to the subfolders without going through all this moving around?
Thanks in advance for any advice
Peter

When you click File>Save As, you will see the Save As window pop up. At the top, you will see a box entitled Save As, which has a space for your to enter the file name. To the right of this box is an arrow pointing down. Click it. The full file hierarchy will be seen. Then you can save directly to the file you want.
Hope this helps.
Don

2 newbies question about diskgroups

Hi gurus,
I have 2 newbies question:
Im working in a RAC Database (11.2.0.3) on Redhat 5.3 with some disk groups. One of this groups have 6 disks on it with different space (134, 236G, 236G, 185G, 185G and 185G).
My questions are:
1) What would be happend when the lower space disk will be full?
2) At this moment the diskgroups are at 45% so i was thinking to change their spaces to have all with the same space (around 193G each), it would create any problem? i should restart database or can do it with database up?
Thanks

if a disk is filled, what would happen? could i resize the disks with same size without stop database and without affecting the data stored within each disc?
By the word 'disk' I assume you mean LUN . When a LUN in a disk group is filled, ASM will use the remaining LUNs to store the data. You should always use LUNs of uniform size to avoid uneven I/O .
could i resize the disks with same size without stop database and without affecting the data stored within each disc
You can get the Unix/Storage team to allocate more LUNs for this Server. Once these LUNs are added , check if the following pre-reqs are met for the LUN which is yet to be added to the disk group
v$asm_disk.HEADER_STATUS = 'CANDIDATE'
v$asm_disk.PATH = /dev/rdsk/youLUNname
v$asm_disk.NAME will be NULL
Now you can add the LUNs using
alter diskgroup DATA_DG01 add disk '/dev/rdsk/youLUNname' rebalance power 4 ; wait for rebalance to finish (check status in V$ASM_OPERATION)
Yes. The above can be done without stopping the DB. It won't affect the stored data either.

Two (too much?) newbies questions about KT3 Ultra 2

Goodmorning all.
I've bought a KT3 Ultra2 (MS-6380E) motherboard and i've two questions about it.
First of all I need to buy the optional S-Bracket to use my SPDif sound sistem... where can i buy it in Italy or in Internet?
In second i've to know the highest processor my MB support becouse i have to upgrade my PC.
Can U help me?
Tha a lot and sorry for disturb.
Hallo.

Hello,
question 2, not sure about question 1,
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=341&kind=1
You may need this BIOS update too.
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=341&kind=1

Flash newbie questions about slow loading site

Hi all. I am new to Flash and web-site building in general and I have been learning while doing. Its fun, but frustrating. I really need some help, hope someone out there with Flash experience can give me some advice.
My problem is this: I built a Flash website, but it is painfully slow to load up (3-5 minutes via cable modem) when I visit the site (via Firefox, etc). Once it does load up, everything is fine with navigation. I'm having a hard time figuring out why its taking so long to load up on the web because, basically, I don't know how to trouble shoot. Hope you guys can help!
Details: the site is just a portfolio site with pictures and a few motion-things, no complicated animations. The swf file is about 9MB. I do have a flash preloader, but it doesn't show up until after the 3-5 minute "load-up" time. When I do the testing via Flash, its Ok and doesn't show the lag. But once I upload the website files and try to visit my website, the load time problem occurs.
My thoughts:
- do I have to purge my Flash file/library of unused images before creating my swf file?
- Is there a problem with my html code in my index file?
- because it is a portfolio site, I've got about 90 images on it, each image about 300-400K. Is this too big, or about right?
Please help! Sorry for the long email, just desperate for help. Thanks in advance for any advise!!!! Just in case, here is the html code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Acme Company</title>
<script src="Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
<style type="text/css">

</style>
<link href="favicon.ico" rel="icon" />
</head>
<center>
<body>
<script type="text/javascript">
AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','wid th','800','heigh t','600','title','Acme Company','vspace','100','src','development files/company site_AS2_2008 OCT_final','loop','false','quality','high','plugin spage','http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','bgco lor','#000000','scale','exactfit','movie','develop ment files/company site_AS2_2008 OCT_final' ); //end AC code
</script><noscript><object classid="clsid27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0" width="800" height="600" vspace="100" title="Acme Company">
<param name="movie" value="development files/comapny site_AS2_2008 OCT_final.swf" />
<param name="quality" value="high" /><param name="BGCOLOR" value="#000000" /><param name="LOOP" value="false" /><param name="SCALE" value="exactfit" />
<embed src="development files/company site_AS2_2008 OCT_final.swf" width="800" height="600" vspace="100" loop="false" quality="high" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" type="application/x-shockwave-flash" bgcolor="#000000" scale="exactfit"></embed>
</object></noscript>

Yeah I'm with Ned on this one. Dynamically loading your images is the way to go. The fact that you are new to Flash, try this tutorial (http://www.entheosweb.com/Flash/loading_external_images.asp). As you move along in learning Flash, look for tutorials on actionscript arrays and loading images dynamically. Arrays allow you to call each images from a folder outside your fla. That way your site moves right along without much loading time.
Hope I was of help,
-Sly

Newbie question about setting up iTunes to sync across multiple computers

Hi,
Right now I am using iTunes primarily for listening to streaming radio. However in about 2-3 weeks after I move, I am considering importing all my CDs into iTunes.
So my question is this. What can I do before I start that will make my life easier for syncing my iTunes across multiple computers.
I don't expect the computers to connect to each via internet but I do have a 4 GB flash disk and 230 GB firewire drive that could be used. And since one of the computers is MacBook Pro, I could use it in target mode I think.
Thanks.

Authorization only applies to computers. When you update a device any protected content on the device for which the library is not authorised will be removed. Otherwise no attempt is made to remove content that was added by a now deauthorised library.
There is a separate scheme permitting up to 10 devices (computers, iPhones, iPad or iPod touches) to be registered for automatic downloads of your purchases with a different mechanism for deregistering devices.
Once you have a file on your computer you can physically copy it to any other computer in the same way that you would copy any other file like a Word document, put it on a disk, email it if not too large, burn it to DVD, stick it on an external hard drive or move it over a network. You can use Get Info. To tell you where it is now and you can drop it into the library at the other end.
The user tip shows how to backup the whole library and then update that backup efficiently. Such a backup to a portable drive also provides a possible tool for transporting any content to another computer.
tt2

Need help reinstalling Yosemite/Question about external hard drive

I have an early MacBook Pro and I have to reinstall Yosemite because I've been getting nothing but spinning beach balls, slow loading, lag in type showing up, and wi-fi issues. I took the laptop to the Genius Bar at the Apple store last week and they ran diagnostics on everything and all was perfectly OK. No hardware issues, no memory issue and he said my laptop was very clean. He saw the spinning beach ball many times while he was working on my laptop and suggested that I turn off File Vault as that could be causing the slowdown. He said if that didn't work (it didn't) to buy an external hard drive (which I received today) and to back up everything through Time Machine then reinstall Yosemite. I specifically bought an external HD that says "for Mac" and as soon as I connected it Time Machine opened and did the backup.
Now these are my questions. Are all my photos on iPhoto, and my Word for Mac documents backed up so that when I reinstall Yosemite, everything is going to be right where I left it? Will I lose Word for Mac and have to reinstall it? Isn't Word for Mac a one time use/install and will I have trouble and have to call Microsoft to input my authentication key in again and will they let me? I know silly questions but I'm really worried about losing stuff.
Also step-by-step detailed instruction on how to reinstall Yosemite would really be appreciated. Thank you!

YoJoLo wrote:
Are all my photos on iPhoto, and my Word for Mac documents backed up so that when I reinstall Yosemite, everything is going to be right where I left it?
If you have taken the backup using the Time machine then there is nothing to worry as all your photos from iPhotos and Word for mac documents are backup safely by your time machine.
Only keep one thing in mind that the external HDD which you use for the time machine backup should have the capacity size of about 3-4 times that of your backup data size. Or else, the time machine external drive will start deleting the files if the external drive is about to be full.
YoJoLo wrote:
Will I lose Word for Mac and have to reinstall it? Isn't Word for Mac a one time use/install and will I have trouble and have to call Microsoft to input my authentication key in again and will they let me?
You absolutely don’t have to reinstall the Word for mac if its install in the first place because Time machine will backup the system installed files of your MS Word which you had installed.
Word for mac is a one time install and you don’t have to call Microsoft for any authentication key after you have restored your Word backup files from the time machine drive. As I said before the time machine will backup your Word system installed files leaving you no chance to reinstall it again.
YoJoLo wrote:
Also step-by-step detailed instruction on how to reinstall Yosemite would really be appreciated. Thank you!
Here, Yosemite reinstall procedure......
Important: To reinstall OS X, you must be connected to the Internet. Make sure your power adapter is plugged in. Reinstall OS X using the built-in recovery disk.
In the menu bar, choose Apple menu > Restart. Once your Mac restarts (and the gray screen appears), hold down the Command and R keys.
Select Disk Utility, then click Continue.
Select your startup disk on the left, then click the Erase tab.
Choose Mac OS Extended (Journaled) from the Format menu, enter a name, then click Erase.
Important: Erasing the disk removes all the information from the disk. Be sure to back up the information you want to keep to an external device.
After the disk is erased, choose Disk Utility > Quit Disk Utility.
Select Reinstall OS X, click Continue, then follow the onscreen instructions.
Hope this helps.....

Thunderbolt / USB3 questions about external backup drives for my new MacBook Pro

I have a new MacBook Pro retina 13". It has two USB3 and two Thunderbolt2 ports.
Until now on my iMac I've kept two backups on two WD USB2 drives. I have never had any problems with any of my WD Passport drives. One for Time Machine and one for CCC (a complete bootable clone incrementally created at 3:30 am every day).
I'd like to get new portable drives for my MBP for these backups going forward and have a few very basic questions, since this is the first time to have a device with a USB3 port, and the first time I even heard about Thunderbolt.
If I get a USB3 drive and need to use it to restore things on my older iMac, which just has USB2, will it generally connect and run with USB2 at a slower speed? Or would I have to get a drive with both USB2 and USB3 ports?
Is Thunderbolt just an Apple thing? Or is it a new standard widely used by peripherals now? I just never heard of it before. Is it faster than USB3?
Is it common for drives to have both Thunderbolt and USB2 connections?
Are there "hubs" for Thunderbolt like there are for USB? Considering the limited number of ports, I'm wondering the best way to connect 2 external drives. My iMac has 4 USB2 ports on the back, and I connect one drive separate to each of those ports, rather than going through a hub.
Is USB3 like USB2 in that if you have even 1 USB2 device (e.g. my Logitech headset) connected to a USB3 hub it will slow down everything on that hub to USB2?
Any recommendations for good, portable backup drives?
Thanks,
Doug

Hi Doug,
Lets see if we can address some of these:
If I get a USB3 drive and need to use it to restore things on my older iMac, which just has USB2, will it generally connect and run with USB2 at a slower speed? Or would I have to get a drive with both USB2 and USB3 ports?
USB3 is "backwards compatible" with USB2 so plugging a USB3 drive into a USB2 port should work, but at USB2 speeds.
Is it common for drives to have both Thunderbolt and USB2 connections?
Drives sold as Thunderbolt often (not always) have USB as well, drives sold as USB never (in my experience) have Thunderbolt connections.
Are there "hubs" for Thunderbolt like there are for USB? Considering the limited number of ports, I'm wondering the best way to connect 2 external drives. My iMac has 4 USB2 ports on the back, and I connect one drive separate to each of those ports, rather than going through a hub.
Yes there are (but don't expect them to be comparable in price to a USB hub) e.g. see here: http://www.belkin.com/uk/p/P-F4U055/
Is Thunderbolt just an Apple thing? Or is it a new standard widely used by peripherals now? I just never heard of it before. Is it faster than USB3?
I'ts an Apple technology (like firewire) and is far from widely used on peripherals. There ARE Thunderbolt drives etc by companies such as LaCie, WD etc but they are still very expensive (3 or 4x the price of an equivalent sized USB drive). For some this was a worthwhile expense since Thunderbolt is many times faster than USB2. But the arrival of USB3 has, in my opinion, changed the landscape. Yes, Thunderbolt is theoretically faster than USB3 (up to twice as fast) but benchmark tests have shown that in real world situations, the speed difference varies from no difference to Thunderbolt being 25 or 30% faster. When you take into account that USB3 drives are more common than Thunderbolt and are only a little more expensive than USB2 drives at present, then it's a "no brainer" as far as I am concerned.
Hope this helps.
Jon

Question about external HD DVD (Blue Ray) players with Tecra M5

I have a TECRA M5 laptop (running XP) although this question could be relevant to other laptop users with no internal HD DVD players.
Is there an external (e.g. USB) HD DVD that I could connect to my laptop? So to watch HD movies on my laptop?
If such a thing exists would it also plug directly to a HD TV (as my laptop has no HDMI)?
Is there any way I could swap my existing internal DVD for a HD one?

Oh man,
I will show you why you _shouldnt_ think about buying an external drive for your machine.
1. Yes, there are PLENTY of external HD DVD drives, mostly of them are connected trough USB
2. You could plug it in your notebook, yes, and probably you could play HD DVD movies on your machine but NOT in HD since your display only supports a maximum resolution of 1024x768 pixels, but HD movies need at least a resolution of 1280x720. Any sufficiently fast computer with a 1280x720 or higher resolution display is capable of displaying HD video, even though computers are generally not advertised as such.
3. No, you cannot plug it directly into a HD TV, I mean why dont you buy then a HD DVD player???
4. Yes you could, but are you familiar enough with computers systems to exchange a drive which is built in your machine?? If you really would spend the money for the drive you should ask then spend some extra money for an technician. ;)
Cheers

Few Questions About Migrating Site & Editing Many Pages at Once

OK. First things first. My manager doesn't want me listing
our company name in this post since we are currently trying to get
out of our hosting contract and she doesn't want to jeapordize
anything in case someone stumbled across the post by a search or
anything. FYI: I have Dreamweaver CS3.
So here's the deal. My company would like to move our site
away from this proprietary WYSIWYG online editor we have. The
current setup locks us into to this silly online editor for our
site and doesn't allow access to our files on their server. This
means that if I want to simply change the file name of a picture on
our site, I have to log in to their editor and go through about ten
stupid steps. The problem is, the site is dynamically generated.
Every page on the site looks something like this at the end:
default.aspx?pageid=9. Those links are permanently attached to
specific pages and the content on the individual pages rarely
changes. I tried using some offline downloaders to grab every page
of our site in case we move it elsewhere. When these pages are
downloaded, though, the file names change and it breaks all of the
links.
If I go into the code and change every individual link to
other pages and style sheets I can get it to look good.
So my first question is: is there a way to easily allow
Dreamweaver to import a couple hundred dynamically generated pages
and make them into static pages so that they just look like
"xyz.com/products.html"? Fortunately, our site is not extremely
large (maybe 250+ pages) so in an absolute worst case scenario I
could post a lot of the pages by hand.
My second question regards changing specific items across many
pages. Our current site contains the ability to place little
widgets into pages. This means that if we want a navigation bar on
a hundred different pages, we just edit the one entry for the
widget and every page changes. I'm sure this is possible in DW, but
I spent an hour trying to search online yesterday trying to find
info and didn't answer my question. Is this what templates are for?
I saw people mentioning Find All, but this didn't seem like a
perfect solution. I apologize if this is a very stupid question. No
one needs to take the time to explain the exact process to me, but
if someone could just tell me the name of the functionality and if
they know a specific resource to learn more about it, that would be
wonderful.
Whatever this functionality is, would I have to start over from
scratch with the pages? Or could I implement it with the current
site that's already put together? I'd be happy to convert the
site to static HTML if there's an easy way to change multiple pages
at once other than Find All and Replace.
Thank you so, so much for any help. I appreciate it. I just
want to make sure these things are possible before we start the
ball rolling down that path.

I think I could answer your questions with just one answer so
here it goes.
What you need to do when making this type of mass move from
an online editor to DW would be to first download a copy of
everything you have just so you have a backup in case any mistakes
are made.
Next with the downloading of the files. You will need to log
in via FTP in Dreamweaver or via your file manager on the control
panel of your website. If you are unsure of where this is or how to
log in via FTP, you may need to contact your host for the login
information. Even though the files appear to be dynamic I do
believe that most editors would just store the pages separately and
just uses includes to make that work. However, if this is not how
it appears, post back with the name of the editor that you were
using.
Next, take one of the files you have. Based on the
description you are giving me it sounds as if they all look the
same just with different content (nav bar aside). If this is the
case you can create a template file in Dreamweaver. Within that
template you should place the content that is the same for all of
your pages. Then make one editable region for your content to go
into. These links can be found from the main toolbar for creating
editable regions and other template functions (which I believe
includes the navbar).
Also one thing to note with templates is that they will
automatically fix links on the pages when you save the template to
include new files via links. So you don't have to worry about
updating all of the pages all of the time. The only thing you would
need to update the individual pages for would be for the content on
those pages.
Hopefully this will get you started in the right direction.
But as I said in the beginning if you have trouble getting the
files off of the site post a bit more information about what you
have and hopefully someone here will be able to point you in the
right direction.

Newbie question about Premiere Elements Organizer

This is a pre-newbie – let’s say “virgin” question. If there is an answer already posted elsewhere, please send me a link.
I’m about to install Premiere Elements 9 to do some clip editing and animation from still images. This would be my first attempt to edit clip or do some animation from still images, besides using Windows Media Maker with my HS students. However, I have been a pretty serious photographer for 20+ years with 1,000’s of images which I now work on in PS CS5 Extended and Lightroom 3. I use Adobe Bridge and LR library to catalogue and organize my images. I’d like to continue to use AB / LR Library to organize my new clips and projects. From reading Bill’s posts, it seems I can use Adobe Bridge, copy my original file, resize in Photoshop, and save in a new folder to use for a Premiere project. This would seem to be most intuitive way for me to work. I already have keywords, metadata, actions in PS… etc. But I think Bill is using Premiere Pro, while I’ll be installing Premiere Elements, which comes bundled with Elements Organizer. Do I need to install or use Elements Organizer? What are the advantages/disadvantages or EO? I guess I’m a little worried about installing the programs and having EO automatically acquire images using presets/defaults that I don’t want to use as well as issues with subfolders, etc. I'm running Windows 7.
Thanks
FYI- this is a great animation project
http://www.thejohnnycashproject.com/#/explore/TopRated

ziggycat4 wrote:
I guess I’m a little worried about installing the programs and having EO automatically acquire images using presets/defaults that I don’t want to use as well as issues with subfolders,
EO doesn't do much with the files themselves, just maintains links to the sources.
For folders you are best to use the folder view in EO to move them as it doesn't keep track of folder locations when changed in Windows Explorer. From the File options in Bridge I think that is pretty much the same.
ziggycat4 wrote:
I would like to get as much input as possible on the advantages/disadvantages of using EO vs say Adobe Bride from others who use Elements Organizer.
Any insights would be appreciated.
Can anyone who has used both EO and AB comment on how EO handles missing (hidden) files, syncing issues, computer hanging up or crashing....etc?
I've only messed around a little with Bridge. But to me it seems lightening fast by comparison to EO. The features Albums and Tags in EO seem much the same as Collections and Keywords in Bridge.
EO has Face Recognition abilities - getting more sophisticated in each version. I've not seen this feature in Bridge.
By default EO allows you to open a file in any of:
Photoshop
Photoshop Elements
Premiere Elements
A single used-defined application (I have mine set to ColorPilot).
Bridge only seems to link to Photoshop.
Missing files can be located manually or by allowing EO to search for them.
Cheers,
Neale
Insanity is hereditary, you get it from your children

A newbie question about external sites authntication

Similar Messages

Maybe you are looking for