About File Content conversion
Hi All,
I Want to Know the Interview Questions From File Content Conversion.
What type of Questions We can Expect Fron that ???
Please Let me know
Regards
Vamsi
Dude,
Simple you need to be throughly prepared to answer about all the parameters in the FCC both for sender or receiver else you gonne face some tough time. For example you might be asked in the sender FCC why is ignoreRecordsetName used for>?, Why is Key field used for? or more usual ques u will face tell abt Sender FCC parameters you have to tell everything no other way out.There are no specific or pin point ques .
Cheers,
<b>RAJ*
*REWARD POINTS IF FOUND USEFULL*</b>
Similar Messages
-
Question about File Content Conversion and parent-child relationships...
Hello!
I have read probably every blog, article and SAP Help document on the topic, but I am stuck on this one. I am trying to convert a General Ledger flat file to an IDoc using the classic file --> IDoc scenario. The setup is done and working, but the IDocs are formatted incorrectly and I believe at least part of the reason is how I am converting the file content.
The root of my problem is that the flat file has a parent-child relationship between the document header and the document item and I want to maintain that since the IDoc type (FIDCCP01) has the same structure in the BKPF and BSEG segments.
Here is the flat (non-XML) file layout that is coming into the file adapter:
FileHeader
DocumentHeader
DocumentItem
DocumentHeader
DocumentItem
and so on (until the number of documents is complete
I would really like the content to be converted so that the line items stay under their parent document headers like this:
<FileHeader></FileHeader>
<DocumentHeader>
<ItemHeader>
</ItemHeader>
</DocumentHeader>
<DocumentHeader>
<ItemHeader>
</ItemHeader>
</DocumentHeader>
But I keep getting this, where it lists the document headers first (one after another), and then all of the line items after the document headers like this:
<FileHeader></FileHeader>
<DocumentHeader></DocumentHeader>
<DocumentHeader></DocumentHeader>
<DocumentHeader></DocumentHeader>
<ItemHeader></ItemHeader>
Is is possible to maintain that parent-child relationship from the flat file and pass it over to the XML?
Thanks,
JohnHi,
Check some links on FCC.
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Phani
Reward points if Helpful -
Hi Question about Sender File Content Conversion
Hi All,
I have a flat file i need convert that flat file to the below XML format using File content Conversion, can anybody help me on this with example File content Convertion parameters
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_FileSend xmlns:ns0="http://test">
<Recordset>
<Contact>
<Name>ABC</Name>
<Number>123</Number>
<Address>
<HouseNumber>246789</HouseNumber>
<StreetNumber>100</StreetNumber>
<Phone>
<Mobile>90000000</Mobile>
<LandLine>12345678</LandLine>
</Phone>
</Address>
<Email>
<Office></Office>
<Personal></Personal>
</Email>
</Contact>
</Recordset>
</ns0:MT_FileSend>Hi Sudheer reddy,
Good question.
File content conversion parameters are:
1) Doccument Name: Doccument name is nothing but message type name for file side: MT_FileSend
2) Doccument Namespace: mention the name space for the message type.
3) Doccument Offset: for which row and which coloumn doccument has to be write.
4) recordset name: mention the record set name: Recordset
5) Recordset Namespace: if the namespace is different for message type name space mention name space or otherwise it is blank.
6) Recordset Structure: Mention the structure name
7) Recordset Sequence: mention the sequence of the recordset Ascending or Decending
8) Recordset permessage: Would define no of record sets per message.
9) Key-field name: to query to the doccument
10) Key field type: string(Case-senstive)
fieldValues
fieldSeparator
endSeparator
Note: pls check in SDN about file content conversions it so many blogs are available, u can easily understand.
Regards,
Sateesh -
Problem with Sender Adapter File Content Conversion
Hi all!
I have a question about file content conversion in sender file adapter.
I have file like:
{field1
field2
field3
field4
$
{field5
field6
field7
field8
And i need to get file like:
<dealings>
<deal>
<field1>{field1</field1>
<field2>field2</field2>
<field3>field3</field3>
<field4>field4</field4>
<field5>-}*</field5>
</deal>
<deal>
<field1>{field5</field1>
<field2>field6</field2>
<field3>field7</field3>
<field4>field8</field4>
<field5>-}*</field5>
</deal>
</dealings>
I put content conversion parameters:
deal.fieldSeparator = $
deal.fieldNames = field1,field2,field3,field4,field5
And i get a file like:
<ns:mt_swift_file>
<dealings>
<deal>
<field1>{field1</field1>
</deal>
<deal>
<field1>field2</field1>
</deal>
<deal>
<field1>field3</field1>
</deal>
<deal>
<field1>field4</field1>
</deal>
<deal>
<field1>-}*</field1>
</deal>
<deal>
<field1/>
</deal>
<deal>
<field1>{field5</field1>
</deal>
<deal>
<field1>field6</field1>
</deal>
<deal>
<field1>field7</field1>
</deal>
<deal>
<field1>field8</field1>
</deal>
<deal>
<field1>-}*</field1>
</deal>
</dealings>
</ns:mt_swift_file>
What i do wrong?
As i understand, XI put string to a separate tag after symbol 'nl', but how can i get structure without unnecessary tags?Hi,
Check some links for FCC
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
File Receiver with Content Conversion
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
How to send a flat file with various field lengths and variable substructures to XI 3.0
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
File Content Conversion for Unequal Number of Columns
Content Conversion ( The Key Field Problem )
The specified item was not found.
File Receiver with Content Conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Phani -
Reg: FILE CONTENT CONVERSION
Hi,
Is any one explain me about File content conversion in SAP XI and how to understand the requirements.Please tell me the procedure how to do it.
With Regards,
Kiran.
Edited by: ravikiran123 on Sep 6, 2010 8:37 AMHi,
Refer the below links:
http://saptechnical .com/Tutorials/XI/Contentconversion/page1.htm
http://help.sap.com/saphelp_srm40/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
http://help.sap.com/saphelp_srm40/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/frameset.htm
Search in SDN, before posting........... -
Hi Frnds,
I am receiving Flat file(.txt) from File Sytsem i hav to read that file using file adapter i have to use File Content Conversion , but i never worked on that help me on this
Flat File:
000000009900000201;17;2007;413.000 ;361.000 ;362.000 ;361.000 ;384.000 ;400.000 ;400.000 ;400.000 ;377.000 ;361.000 ;362.000 ;361.000 ;363.000 ;374.000 ;373.000 ;373.000 ;374.000 ;363.000 ;361.000 ;362.000 ;361.000 ;366.000 ;373.000 ;374.000 ;373.000 ;372.000 ;361.000 ;361.000 ;362.000 ;361.000 ;361.000 ;361.000 ;362.000 ;361.000 ;365.000 ;373.000 ;374.000 ;373.000 ;373.000 ;361.000 ;361.000 ;362.000 ;361.000 ;368.000 ;373.000 ;374.000 ;373.000 ;370.000 ;361.000 ;362.000 ;361.000 ;361.000 ;0.000 ;0.000 ;19200.000.
My Output Format
<Records>
<Record>
<Field1>
<Field2>
<File3>..........<Field58>
text file may contain single record or multiple recored it 1:unbounded but if first number starts with 000000009900000201 number sequece..
How to use FCC for above structure help me on this
Regards
Raja SekharIn the Content conversion parameter (in the sender communication Channel)
specify the paremeters as shown below if ur source structure is like this
<MT_Source>
<Records>
<Record>
<Field1>
<Field2>
<File3>..........<Field58>
</Record>
</Records>
</MT_Source>
Document Name :MT_Source
Document Namespace:Specify the namespace under which u have created ur source message type
RecordSet name:Records
RecordSet structure:Record,*
Record.fieldSeparator:,
Record.fieldNames:Field1,Field2,Field3(Specify all Fields separated by comma)
Record.endSeparator :'nl'
choose + to add extra parameters specified above
for detail about File content conversion at sender adapter see this link [http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm] -
Supress Column Heading - File Content Conversion in Sender Adapter
Hi,
Let me give a more clear picture about my scenario. I need to convert CSV File to XML output:-
My source file has column heading and values. The sample data is mentioned hereunder:-
PERNR;KID;PNALT;NACHN;NAME2;VORNA
;1200;1200;Angus
I have created a data type as under:-
DT_LegacyEmployee (Category - Complex Type)
Employees (Category - Element, Occurence - 1)
Header (Category - Element, Occurence - 0...1)
PERNR_H
KID_H
PNALT_H
NACHN_H
NAME2_H
VORNA_H
Employee (Categroy - Element, Type - DT_LegacyEmployee_Row, Occurence - 0...unbounded)
PERNR
KID
PNALT
NACHN
NAME2
VORNA
The file conversion parameters in the file sender adapter are mentioned hereunder:-
Document Name - MT_LegacyEmployee
Document Namespace - http://abc.com/xi
Recordset Name - Employees
Rescordset Structure - Header,1,Employee,*
Recordsets per Message - 1
Key Field Type - String (Case Sensitive)
Employee.fieldSeparator - ;
Employee.endSeparator - 'nl'
Employee.fieldNames - PERNR,KID,PNALT,NACHN,NAME2,VORNA
I dont' have a key field value. How do we remove the header and show only the values in the xml output. I have searched the forum topics as well checked many blogs related to file content conversion, but nothing helped. Kindly advice how to fix this issue. Thanks in advance.
Regards.
PraveenHi Praveen,
Change your File Adapter as below
Document Name - MT_LegacyEmployee
Document Namespace - http://abc.com/xi
Recordset Name - Employees
Rescordset Structure - Employee,*
Recordsets per Message - 1
Key Field Type - String (Case Sensitive)
Employee.fieldSeparator - ;
Employee.endSeparator - 'nl'
Employee.fieldNames - PERNR,KID,PNALT,NACHN,NAME2,VORNA
There is no need for the Header required in the data type.
DT_LegacyEmployee (Category - Complex Type)
Employees (Category - Element, Occurence - 1)
Employee (Categroy - Element, Type - DT_LegacyEmployee_Row, Occurence - 0...unbounded)
PERNR
KID
PNALT
NACHN
NAME2
VORNA
Now the trick is in the mapping program
Lets assume your mapping looks like
MT_LegacyEmployee ---> MT_TargetEmployee
- Employees ---> Records
- Employee ---> Record
- PERNR ---> TargetPERNR
- .. so on
When you do a mapping from Employee ---> Record apply the following logic.
(PERNR)--->
(TestEquals =) --->(NOT)--->
(Constant) ---> (IF)
(PERNR) (IF Without Else) ---> (Record)
(THEN)
(Employee)--->
When doing this make sure RightClick on PERNR and Select Context ---> Employees.
By default context would be from Employee and it will give you an error of XSD format. So make sure you are changing the context. -
FILE CONTENT CONVERSION/ VARIABLE SUBSTITUTION
Hi Experts,
I have a reciver file which should have
HEADER
field 1
field 2
DETAIL
field 1
field 2
TRAILER
field 1
field 2
My reciever structure is
HEADER
field 1
field 2
DETAIL
field 1
field 2
TRAILER
field 1
field 2
TEMP
field 1
I am using TEMP field1 only for variable substitution and do not want
it to be written to file. How can i use it in FCC.
Pl. Help
AkhilHi,
Plz do refer the folowing links:
Sender -
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
Key value:
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter -
TAB delimited
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
NAB the TAB (File Adapter)
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
Receiver FCC no need of Endseparator
/people/shabarish.vijayakumar/blog/2007/08/03/file-adapter-receiver--are-we-really-sure-about-the-concepts
Regards,
Vinod. -
Doubt regarding Recever file adapter file content conversion (FCC)
Hi Expetrts, below is the my target structure.
<?xml version="1.0" encoding="TF-8"?>
<ns1:MT_StatusChange xmlns:ns1="urn:passhe.com/ChangeOfStatusISA26">
<IV_ST_OBJID>65390091</IV_ST_OBJID>
<IV_BEGDA>25082008</IV_BEGDA>
<LT_STUDENT_STATUS>
<item>
<HS_CAMPUS>65</HS_CAMPUS>
<STOBJID>65390091</STOBJID>
<STUDENT12>michal</STUDENT12>
<HS_STATUS>MISC</HS_STATUS>
<item>
<LT_STUDENT_STATUS>
</ns1:MT_StatusChange>
How to configure in File Content Conversion Recever File Adapter for above target structure. i have done as below, but i am getting error. please correct me where i did mistake.
Recordset Structure : IV_ST_OBJID,IV_BEGDA,LT_STUDENT_STATUS,item
IV_ST_OBJID.fieldNames : IV_ST_OBJID -> for this field there is no subfield
IV_ST_OBJID.fieldSeparator: , (comma)
IV_BEGDA.fieldNames : IV_BEGDA -> for this field there is no subfield
IV_BEGDA.fieldSeparator: , (comma)
LT_STUDENT_STATUS.fieldNames : HS_CAMPUS,STOBJID,STUDENT12,HS_STATUS
LT_STUDENT_STATUS.fieldSeparator: 'nl'
item.fieldNames : HS_CAMPUS,STOBJID,STUDENT12,HS_STATUS
item.fieldSeparator: , (comma)
I am getting below error:
'Conversion configuration error: Unknown structure 'ns1:MT_StatusChange' found in document', probably configuration error in file adapter (XML parser error)'
Thanks
Dhanush.Hi Dhanush,
It is better always if u have a structure with Header and trailers if u have a subsrtuctures in it & always try make it in this format:
<?xml version="1.0" encoding="UTF-8"?>
<MT_ContentConversion_Test>
<Header>
<F1>HF1</F1>
<F2>HF2</F2>
</Header>
<Item>
<F1>IF1</F1>
<F2>IF2</F2>
<Item>
<Trailer>
<F1>TF1</F1>
<F2>TF2</F2>
</Trailer>
</ns0:MT_ContentConversion_Test>
Try to go through this blog it will be very helpful to u :
/people/shabarish.vijayakumar/blog/2007/08/03/file-adapter-receiver--are-we-really-sure-about-the-concepts
Regards,
Vinod. -
File Content Conversion doesn't pull file
Hi all,
I have a Comm Channel using File Content Conversion - it does not pick up the file (no message in msg monitor). If I copy the Comm Channel, turn off File Content Conversion, and change the Sender Agreement to use the copied Comm Channel, the file is picked up and a message appears in the message monitor.
Any ideas? Does File Content Conversion expect certain file names/types/etc...?
Also, side question - when I change the sender agreement (or anything else in the CD), SXI_CACHE shows "Unable to refresh cache contents" with various errors, one of them being "LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM"; another said something about IF_HTTP_.. HTTP Communication error or something.
I'll do more searching on this on and post a new topic if necessary...
Thanks,
BrianI'll try setting those logging settings (don't have access).
In the meantime, here is my content conversion:
Content Conversion info - converting a 3 line type flat file to XML
Example of file layout:
H060412
IC11030416 Example yada yada EA 110137
IC11030417 Example yada yada EA 131206
T000002
>First letter is key field RecType (H=header, I=detail, T=trailer)
Doc name: Material <--msg type
Doc ns: urn:......
Doc offset: <blank>
RS name: Material <--data type
RS ns: <blank>
RS struc: Hdr,1,Dtl,*,Trl,1
RS seq: ascending
RS/msg: 1
Key field: RecType
Key type: String case-sensitive
Hdr.fieldFixedLengths 1,6
Hdr.endSeparator 'nl'
Hdr.fieldNames RecType,GteamsDate
Hdr.keyFieldValue H
Dtl.fieldFixedLengths 1,1,18,20,4,6
Dtl.endSeparator 'nl'
Dtl.fieldNames RecType,ActivityInd,CatalogNum,Description,UOM,ProductClass
Dtl.keyFieldValue I
Trl.fieldFixedLengths 1,6
Trl.endSeparator 'nl'
Trl.fieldNames RecType,RecCount
Trl.keyFieldValue T
Brian -
File content conversion-Document name
Hi frndz,
i am using the file content conversion to upload the sale order details from flat file to r/3, am using the standard bappi for the same. Here my issue is in Content "conversion parameters" there is a parameter "Document name" usually i fill this with the messge type, but now i have not created any messge type for my scenario, i am just imported the bappi and using the same structure so wat i can give in the "Document name" parameter.
Thanks in advance
KarthikeyanHi, see this link:
Configure sender file Adapter With File Content Conversion
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
Configure receiver file Adapter With File Content Conversion
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm+
also see this about documentName parameter
ignore DocumentName
Thanks
Rodrigo
Edited by: Rodrigo Alejandro Pertierra on Aug 11, 2008 10:59 AM -
Encoding problem after File Content Conversion
Hi SAP gurus!
we're about exporting debitor data via PI into CSV files. Therefore we use a mapping to an intermediate structure. In the receiver file adapter a file content conversion is done into the target CSV format.
We have a lot of data with eastern europe characters. Right after the mapping, everything is fine. All characters are processed correctly. After the file content conversion, the files written on the target system contain "?" instead of the special characters.
Does anybody have any hint to fix this problem? We already tried to change the "file.encoding" parameter, but hasn't helped.
Thanks in advance for your support!
Cheers,
MatthiasHello Satish,
thanks for your reply.
First, I have to explain, that the sender side isn't done by file adapter but IDoc adapter. So I cannot change the encoding on sender side.
Both on IDoc and file side, the data is ok. Only when inserting the file content converion, the files become corrupted.
Without using the FCC, tjhe target files are stored as UTF-8. When using FCC the files are stored as ANSI. (I tested this by opening the files in notepad and performing "Save As")
Do you have further ideas?
Cheers,
Matthias -
Sender File Content Conversion with re-occuring record pairs
Hi,
Our FCC works fine with the following structure:
Header1: H1F1, H1F2, H1F3,... (1:1)
Header2: H2F1,H2F2,H2F3,..... (1:1)
Notes: NF1,NF2,NF3,.............(1:1)
Line1:L1F1,L1F2,L1F3,.............(1:N)
Line1:L1F1,L1F2,L1F3,
Line1:L1F1,L1F2,L1F3,
Line1:L1F1,L1F2,L1F3
Line2:L2F1,L2F2,L2F3,............(1:N)
Line2:L2F1,L2F2,L2F3,
Line2:L2F1,L2F2,L2F3,
Line2:L2F1,L2F2,L2F3,
But we have structure as below:
Header1: H1F1, H1F2, H1F3,... (1:1)
Header2: H2F1,H2F2,H2F3,..... (1:1)
Notes: NF1,NF2,NF3,.............(1:1)
Line1:L1F1,L1F2,L1F3,.............(1:N)
Line2:L2F1,L2F2,L2F3,.............(1:N)
Line1:L1F1,L1F2,L1F3,
Line2:L2F1,L2F2,L2F3,
Line1:L1F1,L1F2,L1F3,
Line2:L2F1,L2F2,L2F3,
Line1:L1F1,L1F2,L1F3,
Line2:L2F1,L2F2,L2F3,
Lin1 and Line2 occur as multiple pairs making it as multiple line items. When we use content conversion parameters as below:
Header1.fieldNames H1F1,H1F2,H1F2,...
Header1.fieldFixedLengths 10,5,10,.....
Header1.keyFieldValue H1
Header1.keyFieldInStructure add
Header1.endSeparator 'nl'
Header1.lastFieldsOptional YES
and same for Header2, Notes, Line1, Line2
It picks up only first Header1, Header2, Notes, Line1 and Line2 in a recordset.
Does anyone have idea how could we do this content conversion? Any help would be appreciated.
Reagrds,
N@v!nHi Navin,
You can check the below links :-
Complex File Content Conversion - with random multiple occurrences
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2007/08/03/file-adapter-receiver--are-we-really-sure-about-the-concepts
Complex content conversion File sender
These might be of some help.
Regards,
Rohit -
Sender File Content Conversion Complexity
It is again time to dip into the well of knowledge that is SDN.
I have a question about sender file content conversion.
It appears that I can only create simple XML structures with it, but I'm hoping someone here can help.
Lets says I have a file where each record layout is the same. There are not header records, trailer records, etc. Basically only one structure within the recordset.
However the record itself may have a complicated structure. For example, the layout of each record may be:
String1, String2, String3, Array(0:3) consisting of String4, String5, String6.
Can I convert that to a structure of
<Node>
<string1>
<string2>
<string3>
<array>
<string4>
<string5>
<string6>
<array>
<string4>
<string5>
<string6>
</Node>
Or must I create a DT containing one node giving string4,5 and 6 a unique name for each occurance?
Thanks in advance.Hi,
You can go with generic structure and then either in the adapter module or Mapping, you can format the structure. Because content conversion has a limitation to upto one level.
check this for limitation-
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50061bd9-e56e-2910-3495-c5faa652b710
check this for generic structure-
/people/sravya.talanki2/blog/2005/08/16/configuring-generic-sender-file-cc-adapter
Rgds,
Moorthy -
Regarding file content conversion and jdbc adapters
hi
can any one send me the details about the sender jdbc adapter and the receiver jdbc adapter.
i need the output of sender jdbc adapter(structure)also fro the receiver jdbc adapter.
for file content conversion -
can any one send abt the sender and receiver of the FCC adapter.
also provide some links abt these in blogs.
thanks in advance .Hi..
You can search those links in SDN.
FILE to JDBC Adapter using SAP XI 3.0 --Receiver Jdbc adapter .
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/jdbcTOJDBC& ---for both sender and receiver jdbc adapter configuration
Content Conversion (Pattern/Random content in input file) ---for FCC
Regards,
Leela
Maybe you are looking for
-
Adobe flashplayer 10 problems?
Has anyone had problems downloading latest version of adobe flash player 10 using Firefox as web browser? I keep getting errors stating files are corrupt and will not install correct version..I need help Please..Thank You. PS. I have a desktop with
-
I am trying to convince my company to send me to purchase labview and send me to classes for labview. I am trying to put together a small demo for them using the Labview 7 express evaluatin copy that I recieved. What I am wondering is how can filter
-
Can anyone help me with this issue. I get the message firmware problem after I turn my player on and it tries to rebuild the libraries. I have tried to update the OS in the hope this would fix it but I got the same error. As you may have guessed I am
-
In previous version F6 can Edit url but new version can't it have new hot key or remove it?
in previous version F6 can Edit url but new version can't it have new hot key or remove it??
-
Need to Archive more than 5000 CP's in CRM.
Hi All, I need to archive more than 5000 Contact Persons in CRM system As many of these contact persons are having relationships in CRM which also have replication to R/3 system and contains the R/3 ID , Also these Contact Persons have the open CRM d