Add NEW REPETATIVE AREA

hI
i have made one PLD.
Two repetative area, one for parameter listing , one for query data , are used in that pld.
When i tried to add one more Repetative area, i have seen that Add icons or menuprompt for Repetative area , is deactive.
So i cann;'t add repetative area in PLD.
Please help me
on this matter.
Kunal

Hi Dhanalakshmi
Thanks
i had worked on QUERY PLD.
Yes, we cann't add more then existing two default repetative area
So for summary report, i will have to make new another QPLD with Same Query.
This is Greatest Limitation of QPLD.
Thanks for valuable information.
Regds
Kishore

Similar Messages

How to add the new dep area in existing cod

Dear all,
how to add the new dep area in existing cod we are planing to implement the IFRS by using leading ledger and non leading ledger present we are using OL leading ledger
present we are using dep area 01 ,15
how to achive the parallel accounting in asset accounting how to add new dep area 30 in existing COD
if any document plz refer me

Hi Bhayyapu,
Please refer to the links given below.
New Depreciation area
Adding a New Depreciation Area to Existing Assets - Financial Accounting (FI) - SAP Library
Hope this will help you.
Regards
Eugene

HT1351 We had 2 computers: his itunes library on one, and mine on the other. We got rid of both of those and got a new computer. I put music on the new computer. My ipod songs are not on itunes. Will I erase them if I sync? How do I add new music?

We had 2 computers: his itunes library on one, and mine on the other. We got rid of both of those and got a new computer. I put new music on the new computer. My ipod songs are not on itunes on the new computer. Will I erase them if I sync? How do I add new music?

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

How add new column in analysis from two subject area

which is the right way to add a new column to an existing combined analysis from two subject areas?
if I add the new column first in my two combined queries, then I saw a new column in the results column panel, but this new column is empty and I can't edit its propreties (the button edit column doesn't work). I can't even save the modified analysis due to a "bad xml" errror.
if I try to first add a new column from the results panel and then in my combined queries, obiee says that new columns are not of the same type.
I suppose this is because the new column in results panel has no aggregation formula, unlike new columns in queries.
But I don't know how to change the properties of the new field in the results panel, with no subject area available.
I have to restart from a single subject area? possible?
In this case, there is a way to save/copy filters ecc. from the old analysis?
If anyone can help.
Thanks
Luc

When you are using union clause in analysis or combining with other subject area you suppose to have same number of columns and their datatypes with other analysis.
for datatype issues you can use cast in column expression in each analysis. If you want to add a column only from 1 analysis just add and in other analysis use dummy column with exp 0 or ''(for char) based on the datatype.
These you have to deal with each analysis.
If helps pls mark

How to add new Measures in WEBOSA (Measures are already present in Mviews but needed to be mapped to cube)?

Hi
I am using WEB OSA (Oracle Sales Analyzer) cubes.
Now we had a requirement to add new measure to the existing cube. In the materialized views we successfully added the new column. But coming to cubes we are unable to map the new measure to View. We are using Express Relational Access Administrator for modelling the cubes.
In Cubes I created the measure. and in view also i added the new measure in data base. but in administrator i am not seeing the newly added column.
need ur help on the same.
Thanks in Advance
Sravan.

Hi Sravan,
My memory of these Oracle products are a little fuzzy since we stopped doing development on RAA/RAM back in the year 2000 - exactly 15 years ago!
I recall that the Relational Access Administrator i.e. the RAA admin tool stores the sources i.e. Tables or Views that you include in your project as a set
of metadata in the Warehouse Metadata tables or known as the "WH" tables. I believe your issue is one that the definition of the view as stored in the
WH metadata tables does not include your new measure view column. I believe there is a way to "update" the definition of the view as stored in the
WH metadata tables. I believe there is a wizard that you can run that will show the current and new version of the source table or view and allow the
RAA to update the source definition to the new definition. At this point, you can hopefully map your model measure to the source view column and then
run a new build.
Out of curiosity, please provide the versions you are running for:
1) The windows O/S that you are running the Express Relational Access Administrator
2) The version of the Express Relational Access Administrator
3 The Oracle database version
Finally, please send me a note as to why you are still using this very old (but good) technology. Another words, do you feel the
more recent offerings from Oracle do not satisfy your business requirements or some other reasons for not modernizing your
applications?
Thanks,
David

[FSCM] add parallel valuation area and new valuation classes

Hi, everyone
I have a plan to add parallel valuation area and new (general) valuation class for International Financial Reporting Standards. But I have no experience adding another valuation area. Basically, SAP says new valuation area could be added any time. The concept of parallel valuation area also support that. But I am concerning that there could be a problem technically. Even though there would be a problem when I try to transfer valuation class of new valuation area.
If someone has an experience with these problems, please let me know and prepare that.
Thanks.
Best regards.
Minsun Joo

OX14 - Define Valuation Area (Tick one only- Once your system go live, no more changes)
             Most company take the SAP recommended choice - Value Material Stock at Plant level
             Value Material Stock at Plant or Company Level
          o If you valuate material stocks at plant level, the plant is the valuation area.
          o If you valuate material stocks at company code level, the company code is the valuation area.
          o The decision you make applies to the whole client.
Kesh

I upgraded to 10.8.2 but can't find my notes from before. The new notes are not in mail and I can add new notes but I can't find my old notes

I upgraded to 10.8.2 but can't find my Notes from before I upgraded. The new Notes are not in Mail and I can now add new Notes but I can't find my old Notes.

First, make sure iCloud is selected as the default account in the Notes settings on the iPad. If it is, sign out of iCloud and sign back in.

Add new company (subscriber) for partner application

Hi
I want to add new company (subscriber) for partner application that is accessible from portal.
and I want to get username , password , company in login page and change the login page to accept 3 parameter but I don't know what is the next step . and where can I define my company and define user for the company .
Thanks
Roshanak

Hi,
1. Get info regarding the chart of accounts. It forms the basis for FI\
2. Though automatic postings are not regular, check the required details for configuration for APP. If you are going for APP, u need to check house bank also
3. Check the tax procedures (Varies between countries) - Sales Tax and Withholding tax config
4. Payment terms
5. Discount received / paid configurations
6. Dunning details - Check if existing standard SAPscripts will suffice ur needs. Else u may need the help of ABAPers
Regards,
Sridevi
<i><b>Award points, if useful</b></i>

In LR 4.4, can no longer add new photos/video

Windows Vista, Service Pack 2. 4 GB RAM.
I've had LR 4 for more than 2 years. Worked just fine. Have not used for past year, as I have been traveling. Now, I cannot add new photos or video to my catalog. I have tried using my usual method of "Optimize Folder." Always freezes at 70%. Also tried via "Import into folder." Hit the same 70% wall. I sometimes get an "out of memory" error message, but not always.
Steps I've taken.
a. Reboot computer. (Obviously).
b. Ensure that LR is only program running.
c. Moved a ton of data from hard drive to an external hard drive (since error message did not specify what type of memory I was out of, I wanted to make sure I eliminated "not enough hard drive space" as an possible problem. I have more than 1 Terra-byte of available memory/space right now.
d. Uninstalled entire program, downloaded most recent version, and reinstalled it.
What should I do? Not sure what else to try.

To clarify, it turns out that base.keychain does not need any repairing. It merely needs to reside in a writeable directory.
As for moving this keychain to ~/Library/Keychains, I don't doubt that the suggestion is appropriate in general, and that's certainly where my login keychain resides. But I use base.keychain for a variety of sensitive passwords which I cannot afford to lose, some of which have nothing to do with my computer. (Yes, I know this is what backups are for.) I had also contemplated FileVault'ing my home directory at one point, so I wanted to be sure I kept critical passwords accessible no matter what went wrong.
Perhaps / is a bad choice. Perhaps /Library/Keychains would have been better. Where would you put a keychain that didn't really belong under /Users?

How to add new fields in collaboration tasks?

Hi experts,
Currently, by default, we are able to see in the collaboration tasks rooms fields as "Subject", "From", "Sent Date" , "Due Date" ,
"Status"...
Now i want to add new custom fields apart from standard; when i create new tasks i want fill this new fields and after, display this fields in the UWL.
Can you please let me know how to add our own fields in the collaborations tasks rooms ?
Thanks in advance,
Regards,

Hi Victor Capi,
Could you have a look at the following link.
http://wiki.sdn.sap.com/wiki/display/KMC/XMLFormBuilderinEP7.0
Formsbuilder open the collaboration project and you add the fields. Then import the xml to your portal.
Regards,
Prabha

How to add new infoobject to existing cube or dso?

Hi all,
Can we add new infoobject to exixting cube in BW 3.5 ver? if yes how can we add? Please provide me steps.
Thank you.
Sunil

Hi Sunil,
If you want to add new info object to the IC or DSO which is already holding data - then you need to make a copy of that particular DSO/IC and load the data into dummy.
Now delete the data from the IC/DSO to which you want to add the new info object. once the data is deleted it will allow you to add new info object to you IC/DSO.
save it and activate the IC/DSO
load the data from Dummy DSO and from new run on wards the newly updated info object will also get updated(historical data will not be updated if its newly added to DS as well).
If you want the historical data for the newly added field then you need to drop the compelte data and need to extract from source.
Note: You can't include the new info objects are change the existing info objects if there is data exist in the IC/DSO
Regards
KP
Edited by: prashanthk on Dec 31, 2010 10:54 AM

Add new field to HR PCR forms

Hi All,
We are trying to enhance adobe form for scenario SRQ1.
We want to add some new fields to tha form.
For that we have copied the existing standard form to zform.
We have implemented the zinterface too.
To add new field on form we created as an import parameter in form interface.
We added to context of adobe form and on layout.
But we are not getting that field in 'special_data' table in BADI implementation of SRQ1.
Please let me know how and where we should write a code to add new field in 'special_data' table.
Thanks & Regards,
Nilesh.

Thanks Suresh,
We have added it to characteristics of SRQ1 scenario and it's working.
But now we are facing problem in adding data to additional_data table.
Can you tell us something about it.
Actually in set_additional_values method of BADI we are adding data to additional_data table but on form it is not reflecting.
Please advice.

When I add new music to iTunes, it doesn't appear under artists or anywhere else in library.

The other night, I tried adding a bunch of music that I had sitting on my Seagate external hard drive to my iTunes library, which is also located on my external. I attempted to add around 1,500 songs at once. It was giving me problems at first and only added some of the music so I tried again. Now I have a problem.
When I add new music, iTunes only recognizes that I added it after I close iTunes are restart it. But then, the music doesn't show up under artists or anything. The new music shows up under the Recently Added smart playlist, the folder is located in the iTunes library, and when you search for the music it says its there, but it's not under artists or in the song list or anything.
Example:
1. Added music from Abandon All Ships! (who I didn't have before), but they don't show up under artists despite the fact that iTunes says the music is there.
2. Added music from Whitechapel (who I had before), but the album doesn't show up with the rest.
Hopefully this makes sense the way I explained it. It's all rather frustrating.

Hello transcend94,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Where are my iTunes files located?
http://support.apple.com/kb/ht1391
iTunes: Understanding iTunes Media Organization
http://support.apple.com/kb/ht3847
Avoid using different versions of iTunes, or you may be unable to locate content, or may import or transfer content to the wrong location.
Best of luck,
Mario

When trying to update or add new apps to our daughters iTouch she gets and error saying "cannot connnect to iTunes stores." What to do? We have reset the password, gone into the apple store and so much more.

We are trying to update and add new apps to an iTouch and we get an error saying "cannot connect with iTunes store." We have already reset our password.

Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

When I sync my ipod to add new material, sometimes itunes will automatically rearrange the song order of my pre-existing albums by number of plays. Why does it do this? And is there a way to stop it?

When I add an album to itunes and subsequently to my ipod, everything is arranged by track number of the album. Sometimes when I sync in order to add new material to my ipod, itunes for some reason automatically rearranges some of my pre-existing material by songs with the greatest number of plays to least (though sometimes it seems to be completely random). When I check itunes on my computer, everything still appears to be in order but the way it appears on the device often is in the previously mentioned disorder. Why does it do this? Is there any setting that I can adjust to make it stop because the only way I've found so far is to delete the rearranged material and re-import the cd and then re-sync. It might sound picky, but I prefer that my music be in order by track number as the artists themselves intended for various reasons the foremost being that I often listen to whole albums from start to finish and this glitch makes such problematic. I have found some settings in preferences that focus on how material is arranged but this seemed to be focused on the actual folders where the music is located on my hard drive and not the way it appears on the ipod. If anyone knows the reason it does this or has suggestions on fixing it, I would be greatly appreciative. Thanks.

Did the original songs that do not appear on the car player play in the Music app on the iPod? Sometimes glitches happen and they do not. Also, If y ohave a 5G iPod/iOS 7, purchase songs will show with an cloud icon by them if they are not downloaded if Shall All is turned on in Settings>iTunes and App Store

Add NEW REPETATIVE AREA

Similar Messages

Maybe you are looking for