Airtunes ever? informal survey

seen a lot of posts re: connecting to speakers in windows enviroment... never any success ... has anyone ever connected to speakers via itunes/airtunes running xp pro sp2???.... i don't doubt it is a windows issue because my ibook and mac mini work with no problem.... the xp box sees the speakers in aiport admin utility, itunes sees the speakers and makes them a choice in the drop down menu, but will not connect... apple sell this as windows compatible but i have never seen a success story posted... even tried AIRFOIL as a work around... same result... speakers are seen but cannot connect... itunes gives compatability error ... AIRFOIL gives rtsp error 0... ***?

I'm currently running XP SP2 listening to itunes over airtunes. I had a problem w/ the bonjour service preventing me from seeing the speakers, but disabling the service fixed that. I've done this w/ both wired and wireless connections to the airport.
This answers your original question, it can work... but it doesn't help your present situation much
dumb question: You aren't trying to connect while another machine is already connected are you?

Similar Messages

  • Ax/airtunes/itunes on xp sp2 ever? informal survey

    lots of problem posts... very few if any success stories.. ibook and mac mini effortless... xp box sees the ax/speakers but will not connect...seen a lot of posts re: connecting to speakers in windows enviroment... never any success ... has anyone ever connected to speakers via itunes/airtunes running xp pro sp2???.... i don't doubt it is a windows issue because my ibook and mac mini work with no problem.... the xp box sees the speakers in aiport admin utility, itunes sees the speakers and makes them a choice in the drop down menu, but will not connect... apple sell this as windows compatible but i have never seen a success story posted... even tried AIRFOIL as a work around... same result... speakers are seen but cannot connect... itunes gives compatability error ... AIRFOIL gives rtsp error 0... ***?

    I'm currently running XP SP2 listening to itunes over airtunes. I had a problem w/ the bonjour service preventing me from seeing the speakers, but disabling the service fixed that. I've done this w/ both wired and wireless connections to the airport.
    This answers your original question, it can work... but it doesn't help your present situation much
    dumb question: You aren't trying to connect while another machine is already connected are you?

  • Education for a Java Developer - Informal Survey

    I was wondering what is the education level of most Java developers. Do you have a SCJP ceritifcate? What degree did you get in college?
    Just curious.
    Cheers.

    For myself, I have a BS degree in Computer Science. I have been working as a developer for 5 years. I started as a VB programmer, and the past 2 years have been doing Java programming. I am currently studying for the SCJP exam and thinking about working on a Master's Degree in Software Engineering. The University of Maryland has a good online program.
    What roads have people traveled to get to the top of their profession?

  • Avid or Adobe?

    An informal survey: What do you think is the best software choice to continue doing small-budget pro video editing on my sweet 2011 MBP?

    Zebulun wrote:
    Why not use all the tools from the Big A's?  I've been working in TV Land for decades now and I can't remember a time when the price to enter and buy the necessary tools has ever been cheaper. 
    Yes, great prices now! I'm leaning toward Avid Media Composer, which would tie in with my ProTools work, and maybe open up some opportunities for the future.
    Zebulun wrote:
    I think the biggest problem for you, as a Shake user, is finding another compositor as who knows how much longer our old friend, Shake, will run on the Mac os.
    Shake works great on Snow Leopard. It's an incredible app, and ties in well with my real-time work in Jitter, which is also node-based. If Lion breaks it, then I'll just have to stay in Snow Leopard Land until I can afford Nuke.
    BTW, if you can figure out a way to get a .edu email address, Autodesk Smoke offers a 3-year free demo!
    Although Final Cut X represents another step away from Apple's involvement in the pro community, I still love my iPhone!

  • How to create the Mail forms

    Hi All,
      Actually i am very new to Mail form . i got the requirement as i need to create the Mail form form sending the mail through campaig as well as i want to print the same form so please help me out how to do this, please help me out by providing some step by step process for creating the mail form and some technical stuff for printing the form
    Regatds
    Mohan

    Hi,
    Creating Mail form is multi stage. Have you created any survey.
    I believe its for CRM 7.0. Broad steps are
    1.Enter the CRM WebClient UI
    2.SAP CRM WebClient menu Marketing >> Create: Mail Form
    Mail Form for E-Mail
    1.On the Mail Form: New screen enter the following values:
    Field name     User action and values
    ID     Y_TRADE_SHOW_INVITATION
    Description     Trade Show Invitation
    Language     Original:English
    Usage     Internet Mail (HTML)
    Attribute Context     ERMS
    Subject     Trade Show Invitation
    2.In the Text Element screen area you can freely define the content of your e-mail in the text element.
    3.Choose New Text Element, enter the following data for the e-mail form text block and choose Create:
    Field name     User action and values
    Text Element ID FORM_LETTER
    Description Invitation
    Format HTML
    4.Enter a text for the new text element FORM_LETTER and design it according to your needs.
    If you want to upload a pre-defined text from an external source, choose Load Local File.
    5.In order to insert the generated survey URL into the text, choose Hyperlink.
    6.In the Insert Hyperlink web page dialog enter the following values and choose Insert:
    Field name User action and values
    URL <surveyURL>
    Description     Information Survey
    URL Category     
    Tracking Option Via Target Site
    7.Save your new mail form.
    Hope it helps.
    Rgds,
    Rajiv

  • ICal on computer won't sync with MobileMe

    I own a Mac laptop, desktop, iPad, and iPhone. For some reason, the calendar on my the laptop and desktop will not sync with Mobile Me. So, things I enter onto my calendar on one of the computers will not show up on my other devices and things I enter on my other devices will not show up on the computers.
    I do have the synchronize my calendar using mobile me in my iCal preferences and when I go to mobile me in my settings, the status shows it syncing and when I put the calendar next to iCal it says it synced at 10:14 am...
    I have tried resetting the data on the computer with data from Mobile me even though I will lose some events. It goes through and does this, but nothing changes on my calendar.
    Any advice?
    Thanks.

    I also am now having problems with iCal. I cannot get the data in iCal on my MacBook Pro to sync to either my iPhone or my iPad.
    I am extremely wary of some of the work-arounds suggested on this discussion forum, as I have about eight years of iCal data that I cannot afford to lose.
    I realise that, as it becomes bigger and mores successful, Apple is adopting the Microsoft "****-the-end-user" strategy, but is there at least a manual for iCal 4 that I can download from somewhere. It seems to have adopted a completely different way of operating from earlier (working) iCal versions without ever informing we, the humble users, that this was what we were in for.
    A link to a manual would be a start. A working version of iCal would be better, but I fear Applesoft no longer panders to so menial a requirement as "functional".
    A.

  • How can I lodge a complaint with Apple about quality of products?

    I am about to purchase my fifth or sixth charger for my 13' macbook... of this last year and a half!! I am so unbelievably frustrated with the quality of my charger and the fact that these have to be replaced so often for products that, in just a few months, will stop working. How can I get in touch with Apple to file a complaint of this nature? None of the numbers listed on the contact website correspond with the nature of my complaint.

    lehath9, I don't know if this is the issue you're referring to, but I, too, am terribly frustrated by the amount of money I've spent on genuine Apple chargers in the last 18-24 months. 
    I believe the quality of the chargers has declined significantly and have had to replace, several times over, the chargers that came with my 2nd generation iPad, my iPhone 4S and the latest iPod touch.  The cables/wires are breaking and fraying.  
    I thought perhaps I was being too rough on my cables somehow the first couple times that it happened, but I know that's not the case now.  For comparison, the cables that came with my first two iPod classics and my first Nano are fine. I also took an informal survey via Facebook to see if others have noticed the same issue and got about 20 affirmative responses, all of which stated the problems started with chargers sold in the last 18 months. 
    I've purchased four replacements in the last six months and the third of those 4 is now broken, exactly as the previous 2 replacements and exactly like the three before those.  The rubber/plastic casing for the wires pulls away from the non-USB part of the charger (the end that goes into your ipad/iPhone/iPod).  Once it pulls away the wires are no longer supported and they start to hang at an odd angle (no matter how careful you are plugging, unplugging and positioning the charger in the device) causing them to break and of course preventing a charge from reaching the device. 

  • Smart form to print label

    hi guys,
    i have a quetion for you. What ever i say you here is all about EWM 5.1(seperate instance)
    i have a standard smartform /scwm/hu_shplabel.
    this i should be using to create a shipping label printing (UCC).
    i will tell you wht i did and wht i need.
    i copied this standard to a z form and created the frame (windows i needed).
    i dont know if this needs a driver program at all to call this.
    to my knowledge i know that a method is assigned to this standard form and it calls it.
    but most of the coding is done in the form itself using the input parameters.
    i need to know
    1. do we actually need a driver prog for such forms.
    2. if i have to make changes do i do it in driver prog or form itself.( i can see lot of coding in the present form) , the coding is mostly object oriented.
    3. i even have a bar code to print in it too.
    4. few of the the date to be printed on the label has to come from R/3.
    usually i knew the smart form where u write a se38 program to call the form and input the data mostly needed to print. i am new to this kind .
    do let me know anything u think.
    every information is helpfull
    thank you
    sid

    hi seshu
    first let me thank you for the information.
    standard form has a master window.
    and i have to add 8 more windows.
    i have come across a similar standard smart form but i came to know that it is associated with a
    object and a corresponding class.
    so i came to the conclusion that the present smartform might have a associated object and it is responsible of calling the form.
    i may not be completely true. do tell me if i am or not.
    the present smartform has some code internally and some global parameters added.
    it has some input parameters added.
    but the current functionality is not similar to what the standard is.
    so i didnt understand if i have to code in object or in the form itself.
    do let me know wht ever information you have.

  • HELP! hp laserjet prints code and infinite blank pages!

    hey guys,
    ive got an early 2009 imac with 2.66ghz intel core 2 duo and 8gb ram,
    im running latest mavericks and trying to use a hp laserjet 1320tn printer.
    PROBLEM:
    when i press print i get one page with a line of code and then infinite blank pages untill i hold cancel.
    the line of code is :
    %! PS-Adobe-3.0
                                %APL_DSC_Encoding:   UTF8
                                                                                   %APLProducer: (Version 10.9.2  (Build 13c6
    here are some things that i have tried:
    * checked toner - 46% full
    * using the printer set up on a network (unshared)
    * using the printer via usb
    * reseting printing system ( many times )
    * using latest drivers
    * using older drivers
    * using alternate drivers from HP
    * using a generic post script printer driver
    * repair / verify disk permisions ( many times )
    * (last resort) Clean install of osx mavericks with fresh hp updates
    im fresh out of ideas guys
    the printer has been checked with a windows laptop and it printed perfectly and immediately so its an issue with my mac
    i dont really want to buy another printer as a need a small network duplex monochrome laserjet, and this is perfect ( except i cant get it to work !)
    also i checked with the manufacturer and apple and this printer is supposedly supported.
    any help would be awesome!

    OK here goes... (please take a deep breath)
    I'm going to include TONS of details, hoping that something here might help you get to the answer.
    If it's too much for your brain at whatever moment you get time to read all this, I do apologize.
    Maybe come back later when they're sleeping and you're wide awake, if that is ever possible. I was a stay-at-home Dad for one precocious child for a few years, so I have a tiny idea what you're talking about, though our married friends with multiple (usually bickering) children always assured us that having just one child is nothing at all like having children. So bless you! My heart goes out to you!
    Anyway, in Windows, there used to be a generic HPPCL driver and a generic PostScript driver for older printers. You could usually use a "generic" driver just fine, because very few programs (other than page layout and graphic design) used even 1/10th of the capabilities of the lowest-common-denominator oldest version PCL or PostScript command set. Something like that DOES exist in the Mavericks print installation dialogue.
    But back to YOUR printer.
    I tried installing my HP LaserJet 1320 on my iMac running Mavericks*.
    Unlike Windows, you can't install a printer that OS X Mavericks cannot 'see', either directly connected or via a network 'share', or wirelessly.
    My HP is connected via a network share. This should not significantly change what happens when you install your printer, but no guarantees.
    This was my first attempt to install the HP, because my default printer is a Canon inkjet, connected wirelessly via WiFi.
    So the LaserJet is in another room physically connected via USB to a MacBook, and marked 'Share this printer' on the MacBook system preferences. The MacBook has to be awake (not sleeping) and in this case, physically connected for my iMac to 'see' it.
    So, when I clicked the + sign in the , System Preferences, Printers & Scanners to add a new printer,
    I entered the description HP LaserJet 1320 into the search box the first time, then
    1. Mavericks tried to "find" the HP LaserJet on the network, connected to the MacBook.
    2. "This printer requires software that is not installed..."
    3. "Downloading Printer Software Update..."
    4. "Setting up "HP LaserJet 1320 Series @ KoMtB (MacBook's network name)
    5. At that point the printer appeared in this Add window shown below:
    Note the bottom Use: window below Location...
    Note that the third choice is Generic PostScript Printer...
    THIS IS THE ONLY PLACE AND THE ONLY TIME you can apparently select anything about which printer 'language' the Mac is going to use to talk to your printer:
    In searching for about 10 minutes, I did not find any way to ever get BACK to this screen once the printer installation is complete, short of deleting and reinstalling the printer again, or adding the printer a second time with a different name.
    I selected the choice highlighted, HP LaserJet 1320 series. I did a test print from TextEdit, and it worked perfectly the first time. I also tried it from Pages, and again, it worked perfectly, no spewing of PostScript initialization strings...
    My suspicion is that maybe Generic PostScript Printer is getting selected by Mavericks somehow without ever informing the user.
    Maybe 'Auto Select' does it. Don't know.
    In any case, since you've already done a Printing System reset, you have nothing else (custom print job Presets) to lose by trying to reinstall it again.
    I tried it, and It SHOULD also be possible to install the same printer multiple times, PROVIDED THAT you rename each one slightly during the Add process (HP-3200, HP-Auto Select, HP-Generic PostScript... ), so you can give several of them a try until you find one that actually works.
    Now, here's how to find the 'generic' PCL printer driver...
    Add the printer again, giving is a new name.
    In Use: select "Select Software", then search for "HP LaserJet Series PCL 4/5"
    HP LaserJet Series PCL 4/5 driver IS a 'generic' PCL driver, and SHOULD work for basic printing, provided that you DO NOT use the slash between 4/5 in the printer name use a dash - instead. When I tried it with a slash (probably because it was a network share, the printer did NOT install. When I tried again and used a dash, it worked fine.
    The PCL 4/5 driver comes with a disclaimer as shown below:
    Your HP is apparently from the year 2000? (Mine is from 2004.) It's so hard to give up old workhorse friends, especially when one toner costs almost a much as a new printer. The good news it that newer LaserJets are WAAAAAAY faster, and a toner for a new model still costs almost as much as a new printer...
    After years of buying ONLY genuine HP toner, I finally purchased a generic toner cartridge online last year when I needed to print about 1500 pages. The high capacity generic refill cartridge cost 1/3 of price of a genuine HP 'standard capacity', and it works beautifully.
    Of course this is time consuming, especially when you have active kiddos competing for your time, but the last alternative after Gutenprint is to purchase a new printer.
    *DISCLAIMERS & FOOTNOTES:
    I don't use OS X Mavericks much, so I'm really not the best person to ask. But I did answer this thread ages ago.
    So, if none of this helps, please post your question again as a brand new message in the OS X Mavericks forum.
    That way it will likely get far more 'views' than posting your question in an old thread already marked 'solved'. 
    From what I've seen in the Apple Support Communities, those most knowledgable tireless Saints of Mac with tens of thousands of reputation points who frequent these forums most every day usually look for the 'unanswered' and 'unsolved' questions first.
    Mostly I use OS X 10.8 Mountain Lion, because that's what shipped already installed on my iMac that I purchased from Apple as a refurb in Dec 2013. And because 10.8 seemed more 'sorted out' than Mavericks did last December.
    When I got my iMac last December, I immediately installed OS X 10.9 Mavericks on an external drive that I could select at boot time because:
    1) I could get Mavericks for free (wasn't sure if it would be a limited-time thing)
    2) Purchase of a new or refurb Mac then included a free iWorks suite (Numbers, Pages, Keynote) latest versions (wasn't sure if it would be a limited-time thing)
    3) I have Windows 7 installed under Parallels 9 on Mavericks to run basically one legacy Windows application I spent years learning and still use once or twice a year. Honestly, almost the only time I use Mavericks is to run Parallels 9 and Windows 7 and that legacy Windows app.
    4) My original Mac is a mid-2007 MacBook is still running OS X 10.6.8. That's what the HP printer is connected to. I now use the MacBook for email or when I need to take a computer somewhere else. My MacBook is not capable of being upgraded to run Mavericks, and I wanted to at least know about the current version of OS X, even if I NEVER upgraded my main system.

  • Module Pool Programming - Calling SAP Standard Text Screen

    Hi Gurus
    I am working on Module Pool Programming...In the one of the screen there is a column named "Description"  where I need to keep a Button to call a SAP standard text editing screen and what ever information I enter in the field should be downloadable
    is this option possible?If so...Plz send me the Sample code
    Thanks
    Ganesh

    Hi Gani,
    I can help you till getting the text editor in your module pool program.
    TOP
    PROGRAM  ZREDDY_TEXT.
    constants: line_length type i value 132.
       data:
    reference to wrapper class of control
       g_editor type ref to cl_gui_textedit,
    reference to custom container: necessary to bind TextEdit Control
       g_editor_container type ref to cl_gui_custom_container,
       g_repid like sy-repid,                        " getting program name
       g_ok_code like sy-ucomm,                " return code from screen
       g_mytable(132) type c occurs 0,        " getting the text of table
       g_mycontainer(30) type c,                " string for the containers
       v_result(256) type c,                        " getting the text of table control
       gw_thead like thead,                        " for header information
       it_line type table of tline with header line. " internal table of type tline
    PBO
    MODULE STATUS_0900 OUTPUT.
      SET PF-STATUS 'ZTEXT'.
    SET TITLEBAR 'xxx'.
    if g_editor is initial.
    create control container
       create object g_editor_container
       exporting
       container_name = 'CUSTOM_CONTROL' " Make sure when you create custom container in layout give name as Custom container
       exceptions
       cntl_error = 1
       cntl_system_error = 2
       create_error = 3
       lifetime_error = 4
       lifetime_dynpro_dynpro_link = 5.
       g_mycontainer = 'CUSTOM_CONTROL'.
    create calls constructor, which initializes, creates and links
    TextEdit Control
      create object g_editor
       exporting
       parent = g_editor_container
       wordwrap_mode =
    cl_gui_textedit=>wordwrap_off
       cl_gui_textedit=>wordwrap_at_fixed_position
    cl_gui_textedit=>WORDWRAP_AT_WINDOWBORDER
       wordwrap_position                      = line_length
       wordwrap_to_linebreak_mode     = cl_gui_textedit=>true.
       refresh g_mytable.  " to initialize table upon OK_CODE 'BACK' at PAI
       endif.
    ENDMODULE.                 " STATUS_0900  OUTPUT
    Cheers!!
    Balu
    Edited by: Balu CH on Oct 22, 2008 8:55 PM

  • Need to generate unique sequence number based on category

    Hi,
    I have to update the NEW_NUMBER column  with unique number ,taking into category column consideration.
    Here is the table structure and data.
    {code}
    create table sample(
    CATEGORY VARCHAR2(100),
    NUMBER   VARCHAR2(100),
    NEW_NUMBER VARCHAR2(100))
    {code}
    {code}
    insert into sample values('CAPACITOR','36858','');
    insert into sample values('CAPACITOR','37858','');
    insert into sample values('CAPACITOR','36958','');
    insert into sample values('RESISTOR','46858','');
    insert into sample values('RESISTOR','47858','');
    insert into sample values('RESISTOR','46958','');
    {code}
    I have to update the NEW_NUMBER column  with unique number ,taking into category column consideration.
    Output would be like this.
    {code}
    insert into sample values('CAPACITOR','36858','270-01-0000001');
    insert into sample values('CAPACITOR','37858','270-01-0000002');
    insert into sample values('CAPACITOR','36958','270-01-0000003');
    insert into sample values('RESISTOR','46858','370-01-0000001');
    insert into sample values('RESISTOR','47858','370-01-0000002');
    insert into sample values('RESISTOR','46958','370-01-0000003');
    {code}
    If you can help to generate for one category,I will do it for other categories.
    Thanks in advance.
    Thanks,
    Lak

    Not sure how you came up with 270 and 370. But with what ever information you have provided this is what i came up with.
    SQL> select * from sample;
    CATEGORY   OLD_NUMBER           NEW_NUMBER
    CAPACITOR  36858
    CAPACITOR  37858
    CAPACITOR  36958
    RESISTOR   46858
    RESISTOR   47858
    RESISTOR   46958
    6 rows selected.
    SQL> merge into sample a
      2  using (
      3          select category
      4               , old_number
      5               , decode(category, 'CAPACITOR', '270', 'RESISTOR', '370')
      6                 || '-01-'
      7                 || lpad
      8                    (
      9                       row_number() over(partition by category order by old_number)
    10                     , 7
    11                     , '0'
    12                    ) new_number
    13            from sample
    14        ) b
    15     on (
    16          a.category   = b.category and
    17          a.old_number = b.old_number
    18        )
    19   when matched then
    20      update set a.new_number = b.new_number;
    6 rows merged.
    SQL> select * from sample order by category, old_number;
    CATEGORY   OLD_NUMBER           NEW_NUMBER
    CAPACITOR  36858                270-01-0000001
    CAPACITOR  36958                270-01-0000002
    CAPACITOR  37858                270-01-0000003
    RESISTOR   46858                370-01-0000001
    RESISTOR   46958                370-01-0000002
    RESISTOR   47858                370-01-0000003
    6 rows selected.

  • ASMlib will not initialize after reboot. OEL6.6

    Greetings,
    After some routine maintenance and cleaning up trace and alert logs on a dev server, a reboot was performed.
    When the server came back up, the ASMlib would not initialize, and the /dev/oracleasm/disks folder was gone. ASMlib has been in use since day one on this machine, and has given no troubles in six months of operation.
    Querying the disks shows that the headers are still intact, and that they are labelled as ASM disks.
    Attempting to re-configure via /etc/init.d/oracleasm configure lead to no success.
    I've also uninstalled and re-installed the oracle asm packages.
    [root@oraserver~]# rpm -qa | grep asm
    kmod-oracleasm-2.0.8-4.el6_6.x86_64
    oracleasm-support-2.1.8-1.el6.x86_64
    a tail of /var/log/oracleasm shows:
    tail -f /var/log/oracleasm
    Unable to instantiate disk "VOL2"
    Loading module "oracleasm": failed
    Unable to load module "oracleasm"
    Loading module "oracleasm": failed
    Unable to load module "oracleasm"
    Creating /dev/oracleasm mount point: /dev/oracleasm
    Loading module "oracleasm": failed
    Unable to load module "oracleasm"
    Loading module "oracleasm": failed
    Unable to load module "oracleasm"
    kernel:
    uname -r
    2.6.32-504.1.3.el6.x86_64.debug
    at this point, I'm out of ideas, and google has not been terribly helpful. Has anyone else run across this before? I'll get what ever information you might need to help suss out a cause.
    Thanks for your time,
    Ken

    Cleaning the database diag directories cannot affect ASMLib. The problem must be something else. Since all the ASM device and diskgroup information is stored on the disks, it should be sufficient to simply re-install and reconfigure the software.
    All ASMLib installations require the oracleasmlib and oracleasm-support packages in addition to the kernel driver, which is built-in only if you are using the Oracle UEK kernel. You might be missing the oracleasmlib package.
    Perhaps the following will solve the problem:
    su - root
    wget http://download.oracle.com/otn_software/asmlib/oracleasmlib-2.0.4-1.el6.x86_64.rpm
    yum install ./oracleasmlib-2.0.4-1.el6.x86_64.rpm
    /etc/init.d/oracleasm configure

  • Airport Express used to receive music from a Windows box?

    Can an Airport Express be connected to speakers and receive music files wirelessly from a Windows computer with iTunes on it?
    Thanks.

    in theory yes... i have an ibook, mac mini and xp box... of course the ibook and mac mini see and play music effortlessly through speakers plugged in to the airport express... the confounded windows box sees the speakers but when i select them from the drop down menu in iTunes, it attempts to connect but comes back with base station not compatible with this version of iTunes... i really think it is a windows "problem" but APPLE pitches this product as windows compatible and was "sold" on the we will support it pitch from apple store but have received no satisfaction to that end as of yet... if i have to i am going to bring the xp box in to the apple genius and let them have a go.. i started an informal survey re: this issue in an earlier post to see if ANYONE has successfully made this work on windows box... oddly enough or should i say not odd at all NO positive reponses!

  • Problem with iBook G4 .4.11

    Ok I am very new to the forum and I am not much of a technical guy.
    This has been happening for quite a few updates and is taking to much time now so I decided I needed to seek proper help.
    When I type the computer decides to type random charecters that are not a language they are more like symbols and sometimes fo®iegn (foreign, see) this takes up alot of time and I have to retype many words over and over again.
    In this post along I have counted 98 foriegn charecters so far that I have had to delete.
    This makes searching for topics on sights like google very hard because it cant find these random charecters.
    I have looked through my font book and the charecters turning up are í†˙´(there we go again) wedding thingy bob or non at all ßøµó of these charecters are not even found on my font book.
    This also happens in such programs like apple works and microsoft word etc....
    Also my trackpad sometimes makes my web pages go back and forth like pressing back button top left. This annoying but not a major problem.
    Please help me, I will provide what ever information is needed as long as I am asked to..
    as I say I am not a technical guy so I dont know what to look for.
    Thankyou in advance

    È am s†^l¬ ha√´^~© †®ø¨∫le with t˙e typing as you ca~ ß´´≥
    Th´ †¥p^~ill håß pro∫l´µs.
    I am not doin© †˙^s øn purpoße I åµ ju߆ typing at my õrµal ƒås† πåçe å~d thiß ^håt çøµ´ß øu†≥
    †h´ π®bl´m ß´´µß †o ∫´ g´††^ng ∑ørß´ åß È çåñot mak´ any se~se out of i†.
    P¬´åß´ h´¬π.
    TRANSLATED ...
    As you can see I am still having trouble typing without this
    gobbledegook happening.
    I am not typing this on purpose, I am just typing at my normal
    quickish pace and this is what comes out.
    As you can see not much sense can be made out of it and it seems to
    be on all internet programs seen I typed this message in Microsoft word
    on the same mac laptop and it didn’t have one problem.
    I really want to know the problem now ☹
    It is getting very annoying because I cant email or post blogs or even
    search the net without it taking 15 times longer ☹
    Thankyou for the help so far

  • I SPENT HOURS AND HOURS ON A BOOK FOR MY PARENTS. NOW IT IS GONE! MY PROJECTS IS EMPTY.

    Once again,  I have spent many many hours making a book for my parents.  Finding old photos of my parents, their parent and other family members.  Working with my mother long distance to get the right information about each and every picture and on and on.  I had two pictures left to ID and I when into MY PROJECTS with HP PHOTO CREATIONS, and my PROJECT is GONE!!   I have look everywhere on my harddrive and nothing.  At no time was there EVER information provided by HP that when the PHOTO CREATIONS PROGRAM WAS UPDATED I would lose all of my hard work.  
    I can not even begin to tell you how angry I am at this moment.  My mother is very ill and most likely the book will not ever be started over again.  PLEASE I am begging....if HP could help me find my project.  The name of the book was Zuhlke Family.  
    In addition I really have got to say I own HP printers laptops etc as I love the quality.  I have purchased the My Care warrant (or whatever it is called, and never used it) but trying to be able to simply ASK A QUESTION is such an ordeal with HP.  I truly am thinking of going with a different company simply because other companies are approachable and HP is NOT. There is so much you have to go through it is ridiculous.  Each new set of questions and what is the serial number and where did you purchase your item only adds to the frustration people are already feeling.  So by the time we can actually get to a place where a question can be asked the frustration level has risen 10 fold.  Just something for you to think about.  
    This question was solved.
    View Solution.

    Hi Berlee,
    We apologize for the difficulty that you are experiencing.  We do appreciate how much time and effort that you have invested and how valuable this project is. 
    We would be happy to assist you with this.  If you could please email our customer support center at [email protected]; we will be sure to have one of our technical support specialists contact you immediately.
    Thank you,
    HP Photo Creations Customer Support

Maybe you are looking for