An outline issue in EP

Hi,
In NWDS i created a application object in EP perspective and when i selected portalapp.xml under PORTAL-INF the
"An outline is not available" in outline area. could anybody explain me why this message is coming. i want to add the properties for the application object.
Thanks,
sri.

Hi!
The file is closed when i access. The issue is elsewhere and it is not reading the file...
Thanks,
San

Similar Messages

Stored outline issue

Hi experts,
i have an issues with stored outlines.i am on oracle 9.2.0.1
i created and outline as
CREATE OR REPLACE OUTLINE JOB1 FOR CATEGORY JOB_TBL2 ON
SELECT EMPLID FROM PS_JOB WHERE ACTION LIKE :1
then
ALTER SESSION SET use_stored_outlines=JOB_TBL2;
after that if i run the query SELECT EMPLID FROM PS_JOB WHERE ACTION LIKE :1 then my stored outline is used
but if i run as SELECT EMPLID FROM PS_JOB WHERE ACTION LIKE 'HIR' it doesnot use stored outline.
i test with both cursor sharing =similar\exact
Please help.

Loading at non lev0 members and aggregating with SET AGGMISSIG OFF may protect the data at non lev0 combinatioons that time.
It will not protect the data permanantly as future calc operations has always a chance to overwrite that data.
Follow the below prctices
1) Load high at the non lev0 combination
2) Run the push down calculation to allocate this data to lev0 combinations.
3) Aggregate the data.
Second approch is
If you dont like to tie this data to the any available lev0 members for any reasons.Consider the below hierarchy
---PG
-------PG1
-------PG2
-------PG3
You want to load data at PG member level and dont like to tie for any of the members PG1, PG2 and PG3.
Then add a place holder member PG_I as a sibling to PG3 and load the data to that PG_I.
Then you can see the expected data at PG with out loading high and applying conditions.

All layers displayed in outlines issue

I teach University level courses in Flash Animation and on of my
students has encountered a strange issue: all the layers are
displayed as outlines. I can assure you that outline mode is
NOT switced on "globally" or for each layer. I have tried toggling
the icons on and off to see if that would reset it, but it did not.
Every new document is doing this, even after relaunching the
program and rebooting the OS,
Preview and Published display correctly, it is only in the
the working environment that things aren't right.
None of the other workstations are doing this, just this one.
I did an update, but the issue persisted.
The weirdest part about it is, when I gave him a file created on
my laptop to see what would happen, everything was displayed
normally, New layers added to this document also displayed
normally.
We have iMac workstatios running Snow Leopard if that makes
a difference.
This is Flash CS5 by the way.
Other than doing a re-install, does anyone have any idears?
Thanks in advance for help on this!

Ned is correct. You always need to have a preview mode selected. Clicking on it while it is selected will not disable it. You need to choose a different preview mode setting. Also preview mode is saved per fla; therefore, you don't see this issue when opening your fla on your student's computer.
To set a default preview mode for new document:
1. Create a new flash document (AS2, AS3, etc...) or open any existing document.
2. Change preview mode to the setting that works best for your project (please see explanation of what each meant below).
Any new document created will have the new preview mode.
According to Adobe help docs:
Outlines: Displays only the outlines of the shapes in your scene and causes all lines to appear as thin lines. This makes it easier to reshape your graphic elements and to display complex scenes quickly.
Fast: Turns off anti-aliasing and displays all the colors and line styles of your drawing.
Antialias:Turns on anti-aliasing for lines, shapes, and bitmaps and displays shapes and lines so that their edges appear smoother on the screen. Draws more slowly than the Fast option. Anti-aliasing works best on video cards that provide thousands (16‑bit) or millions (24‑bit) of colors. In 16‑ or 256‑color mode, black lines are smoothed, but colors might look better in Fast mode.
Antialias Text:Smooths the edges of any text. Works best with large font sizes and can be slow with large amounts of text. This is the most common mode in which to work.
Full:Renders all content on the Stage fully. Might slow down display.
Hope this help!
Quynh
Flash Authoring, QA

Essbase Export outline issue in 11.1.2

Hi Essbase folks,
I'm working in Essbase 11.1.2.1 and am trying to export outline using maxl command.
When I execute Maxl,I see statment executed successfully for all the statements. But I do not see output either in server or in my local machine in the specified path.
here is my code:
login user pwd on server;
alter system load application 'Demo';
alter application 'Demo' load database 'Demo_DB';
export outline Demo.Demo_DB all dimensions to xml_file "D:\Demoexport.xml";
logout;
I've also tried to export one dimension, but that also did not give any output (ran successfully though)
export outline Demo.Demo_DB list dimensions {"Scenario"} tree to xml_file "D:\Demoexport.xml";
Can you please let me know if there is something that I'm missing in the code

These work for me
export outline sample.basic all dimensions to xml_file "D:\sample.xml";
export outline sample.basic list dimensions {"Measures"} tree to xml_file "D:\SampleMeasures.xml";
Ran from a client machine and it creates both the files on the local client machine.
Have you tried running on the server, are you using a different version of Maxl from the server?
Cheers
John
http://john-goodwin.blogspot.com/

Photoshop CC Brush Outline Issue (image)

I am having this strange effect when using the brush tool in photoshop cc. Whenever I use the brush tool, the outline of the marks the brush tool makes is much darker than the rest of the color. What could be causing this? Opacity is at 100%, Flow is at 100% and its on normal mode.
I don't recall the brush tool ever behaving like this for me before.
Thanks in advance

Is "Wet Edges" checked in the Brush Panel?
Could you please post a screenshot with the pertinent Panels visible?

Problem in saving the outline.

Hi
i'm running with a problem.
i have deleted the members of a dimension in my outline and now i'm loading it again by build files. when i am trying to save my outline it displays "Unable to complete reading from outline. Out of memory".
can anyone tell me the reason behind this?

Recommendation: use a default/template outline that has not been edited too much (one that doesn't have the members in that dimension to begin with).
Then, with the data cleared, you can unload the database, copy the outline over, and then perform your dimbuild against this outline, and reload your data.
There are caveats to this approach, but you should be able to test this process out and make it work for you.
The other approach is to save/unload/reload the database between removing members and rebuilding them, although this won't solve the problem of the "ever expanding outline" issue.

Outline Stroke in Illustrator CS3 Broken?

It seems that Outline Stroke in Illustrator CS3 is broken in more ways than one. The bug I'm struggling with at the moment is that Outline Stroke seems to ignore the strokes alignment. For example, if I have the stroke of an object set to "outside" or "inside" (instead of center), outline stroke creates the outline of the stroke as if it were "center" aligned. I've checked that in CS4 this bug has been fixed, but I don't have access to CS4 at work. Does anyone know of a work around or patch that resolves this, or is an upgrade to CS4 the only option?
On a side note, Illustrator CS3 has to be the buggiest adobe application I've ever dealt with. It has so many little annoying bugs, most of which are fixed in CS4. I shouldn't have to pay for an upgrade to CS4 just to get bugs fixed though, that seems wrong.

TomWardrop wrote:
On a side note, Illustrator CS3 has to be the buggiest adobe application I've ever dealt with. It has so many little annoying bugs, most of which are fixed in CS4. I shouldn't have to pay for an upgrade to CS4 just to get bugs fixed though, that seems wrong.
You must not have used version 10.
As for the outline issue... try Object > Flatten Transparency

Stroke issues Illustrator CS3

Hello,
When i give outlined text in illustrator CS3 a stroke of 0,1pt it seems like
the stroke is put on in an angle (like its done with a brush)
Expanding the stroke makes the problem even clearer.
This problem seems to become less when i boost the stroke to 0,15pt.
Opening the same document in CS2 gives no problems at all.. the stroke works as it should do.
Any ideas on this?
thnxs!!
G5 PPC 2,5GHz dual 1,5Gb ram
Mac OsX 10.4.11
CS3

TomWardrop wrote:
On a side note, Illustrator CS3 has to be the buggiest adobe application I've ever dealt with. It has so many little annoying bugs, most of which are fixed in CS4. I shouldn't have to pay for an upgrade to CS4 just to get bugs fixed though, that seems wrong.
You must not have used version 10.
As for the outline issue... try Object > Flatten Transparency

Document Outline Not Converting As Expected

I have a word document with two levels of headings. The
Flashpaper options "Include Outline" is checked. The problem is,
Flashpaper is only including the first level heading, not the
second one. Also, when you click on one of the headings in the
flashpaper document, it links to a completely unrelated page in the
document.

I have resolved my Outline issues:
1. When I create the FlashPaper document using the FlashPaper
toolbar that is installed in Word, an outline is NOT created.
However when I create the FlashPaper document using the FlashPaper
menu command installed in Word, I DO get an outline (provided I
have selected the Include Outline checkbox in the Options dialog
box).
2. As for outline links going to the wrong location, after a
careful review of the Word document during which I replaced a page
break immediately followed by a section break with a single
combination section-page break, I was able to get the outline links
accurate.
My outline runs four levels deep.

Indesign document PDFs with Black outline around pages ... and ...

Hi guys
I have posted this problem in the acrobat section but have thought it could be an indesign issue also.
Basically I am PDFing an InDesign CC document with crop and bleed for a printer. For some reason, on some pages, it adds a black/grey outline to pages, and in some cases seems to crop the page so there is no bleed.
Any thoughts? Original post with image can be seen here: PDF has strange black outline at printers end?
Thanks

Thanks for the reply Rob. This is not the case - I know this as other pages in the document have there bleed correct (5mm all around). I have resolved the black outline issue, but now have this bleed issue. On my screen the PDF looks fine but for some reason when the printer opens it, they do not get the bleed on the left edge!
Thanks

MacSafari Blue color outline appears to be leaking from the focused button

In Mac Safari, by default focused field gets a blue glowing outline. I have an issue with this outline feature. My application contains pages with number of frames in it. Content of the page will be in one frame and buttons are placed on the another frame.
Buttons in the frame will be used for all the pages and will be enabled or disabled based on the content in another frame.
When i traverse to different pages the blue color outline gets intensified for the focus field and gets displayed even the button is hidden for certain pages. This blue color outline disappears when i try to referesh or do something which repaints the screen. Hence the stand alone blue color glowing borders get displayed in some of the pages even the button is hidden.
I tried different ways to get rid of the blue color outline. If I apply Outline: none property thru CssClass then i can get rid of this issue but the user will not come to know which button is focus if i remove this outline propery.
If anybody have this blue color outline issue for the hidden fields kindly share your thoughts with me.
It would be very helpful for me if somebody can shed some light on this issue.

HI,
From your Safari menu bar click Safari / Preferences then select the Advanced tab.
Select: *None Selected* from the Style sheet pop up menu.
Quit Safari (Command + Q) Relaunch Safari.
Same here: http://discussions.apple.com/message.jspa?messageID=12550102#12550102
Carolyn

Why am I now waiting in queue over an hour...no...two hours for support chat?

Since this last CC desktop client update, CC decided it needed to sync all 7k+ of my files in my CC folder, crashing once in process, and creating a multitude of Acrobat Distiller errors, much as it has been doing for more than the past year. I figured I'd try to ask support chat about this. I'd also like to inquire as to whether I can expect my CC folder location to be moved from my data drive back to my system SSD on my desktop, as happened with the last CC desktop update, and if there is any way to avoid this from happening.
That was about an hour and 30 minutes ago. As I was waiting I rediscovered this thread: Adobe Support Availability Questions and Feedback . Funny, as it outlines issues with chat support and offers suggestions that could greatly lower queue times during off hours, as I'm currently experiencing, but it received zero replies. I also received zero replies in these forums to a thread I bumped asking why the Adobe Shape app is sometimes not uploading to CC and what to do when that happens. It seems at least two other people have run into the same issue. That thread was started two months ago and has so far received zero response: Adobe shape only partially uploading to the cloud I didn't start this thread, just had the same issue as the originator.
Coming up on an hour and 40 minutes now, and if I get through, I'll probably be told they cannot offer any support for troubleshooting the CC desktop app. Ironic that, seeing as I first reported very similar issues back in December of 2013, dealt with it for months, even installing logging versions of the CC software, and some issues still remain unresolved.
Yes, I'm whining. I am paying $50/month for CC, and I'm reaching the point where I'm believing support is largely non-functional. I dread contacting support at this point, whether phone or chat. It is a large time and attention sink, that much more often than not, does not seem to solve the issue(s), many times for days, weeks, months, sometimes even years. I used to have much more hope for these forums, but as of late, my last two questions, as detailed above, received no responses in over a month.
Beginning to approach 2 hours in the chat queue. Need to get to bed. It is really frustrating that Adobe seems to be developing the support strategy of a monopoly, "Why bother, who else are they going to move to?". This seems to me to be the case, growing the number of clients, and not bothering to grow support at the same rate. How else does one explain a chat queue that used used to take 30 minutes, a month ago it took an hour, and tonight is taking two hours with no response, or that my questions on these forums used to receive an almost immediate response here, and now they languish with no replies, even when they are not whining, but legitimate technical questions, and yes, the legitimate technical questions came before the whining. Time to de-queue, after waiting for two hours, and go to bed.

Once you do get things working... Hardware crashes or virus infections happen, so you should buy software to make a full backup of your hard drive to an external USB hard drive... plus, making step-by-step backups during a new install or major program addition makes it easy to go back a step if something doesn't work
This backup and then restore is, of course, only to the same computer with a new drive (or the same drive as long as you don't mind writing over everything) since doing a restore to a new computer won't work due to Windows and many programs having activation information that is keyed to your hardware (which is why Windows will force you to RE-Activate if you change very much hardware)
The product I use is at http://www.terabyteunlimited.com/image-for-linux.htm
Image runs off of a bootable CD via Linux (the Zip you download includes a program to make the bootable CD) and it reads EVERYTHING on the drive, even the hidden registration information, so everything is restored when needed... and you may restore the image to a brand new drive in case of a crash, and not have to re-install anything
Please note that I own no part of Image, and I don't get a referral fee (that is just a plain web link) but I use the program and it has saved me a LOT of trouble when I had a hard drive die... and I was able to restore everything and not have to re-install or re-activate a single program, from Windows on up

How is it possible to cancel (not suspend) a video download from iTunes Store (iPad under iOs 6)? (I do not have sufficient storage space on my iPad)

Hi,
I am facing the following difficulty with my iPad (model MD369NF/A) under iOs 6.1.3.
I have bought 2 videos on iTunes Store, but I do not succeed in downloading them: an error message mentions that iPas does not have enough storage capacity.
As a matter of face, when I look at the way the storage is used, I find “Others” for around 10 Go (is there some king of reserved space for the downloading of videos from iTunes Store?), and only a very small number of Mo available.
I would simply like to cancel the downloading of the 2 videos, and hope that it would free the "Others" storage space (in the hypothesis that "Others" is space reserved for videos once downloaded), but I do not manage to do it. I can suspend the downloading, but I do not see how to cancel it.
Would you have a solution to propose ?
Thanks in advance for your help,
Nicolas

Hey Nicolas36,
Thanks for the question, and welcome to Apple Support Communities.
The following article outlines issues with free space, capacity, and a large amount of "other" space. You'll want to connect your iPad to your computer with iTunes to follow the steps:
iOS: 'Not enough free space' alert when trying to sync
http://support.apple.com/kb/TS1503
One symptom of this issue will be displayed in iTunes where the Capacity indicator for the iOS device will report a large amount of "Other" disk usage for the device. To resolve this issue:
- Turn off the music or photo sync option in iTunes for the device.
- Click Apply to sync the changes to the device.
- Turn the music and photo sync options for the device on again.
- Click Apply again to try to sync the device to iTunes.
Thanks,
Matt M.

FireWire on MacPro - some disks mounting, some don't

Hello
I seem to have a FireWire problem on my Mac Pro.
I have a removable hard disk case from WiebeTech (FW 800 and USB 2.0) that has refused to let me mount disks since I got the Mac Pro. USB works, but not FW. I thought it must be a problem with the case. WiebeTech thinks so too, that the bridge is broken. I also have an external FW 800/400 naked hdd dock from the same maker, and it hasn't given me any problems. Until today, anyway.
Today it refused to mount. I also found I can't mount my external cased FW 400 hard disk.
I went to the System Profiler, and it didn't display the FW bus. Odd.
I then ran the Apple Hardware test. No problems reported. I rebooted and did a safe boot. Logged in.
Now the System Profiler showed the bus, the hard disk attached to the FW 800 naked hdd dock mounted, and the iPod mounted as well. When the bus was gone, nothing mounthed, of course.
Now I just have the problem with the external FW 400 and removable FW 800 disks in the WiebeTech case.
But the above leads me to believe that the problem is not with the disks or dock connectors, but with the Mac hardware or software.
I have done the latest firmware upgrade for the Mac Pro.
Any hints?

I have had a lot of problems with a MyBook 500GB external drive from WD. Connecting via USB 2.0 is fine, always works. Connecting via Firewire 800 is a problem.
If I restart my mac with my two FW 400 drives and my FW 800 connected, only the FW 400's mount. When I unplug my FW 800 and remove the power cord. Then plug in the FW 800 cable, and then plug in the FW Drive power cord it "sometimes" mounts. That seems to be the order.
I saw some posts elsewhere that outline issues with the Firewire buss and sharing between the front and the back. Some recommend to get a PCI firewire card and put it in. It really should work as designed; I think these guys had power issues and other file copy problems. I have none of that - its all about mounting the drive.
Message was edited by: jimmyc-ATL

I can not sync ipod due to 6gb of 'other', how do I get rid of this?

I can not sync ipod due to 6gb of 'other', how do i get rid of this?

Hello drumsdonkey,
Thanks for the question. The following article outlines issues with free space, capacity, and a large amount of "other" space. While it refers to iOS devices, most steps are applicable for your situation as well:
iOS: 'Not enough free space' alert when trying to sync
http://support.apple.com/kb/ts1503
One symptom of this issue will be displayed in iTunes where the Capacity indicator for the iOS device will report a large amount of "Other" disk usage for the device. To resolve this issue:
- Turn off the music or photo sync option in iTunes for the device.
- Click Apply to sync the changes to the device.
- Turn the music and photo sync options for the device on again.
- Click Apply again to try to sync the device to iTunes.
Thanks,
Matt M.

An outline issue in EP

Similar Messages

Maybe you are looking for