/ and without /
I am using web cache to connect to the web server, both are oracle product.
I find the when I access the server by http://www.example.com/app1/ , it will go to the page that I want.
But if I access the server by http://www.example.com/app1 (without the / at the end), it will redirect to http://127.0.0.1:7200/app1 which cannot display the page correctly.
What's wrong with my setting?
Thank you.
Let me give more details about my server:
1) I have installed the WebCache and OHS into the same machine.
2) I have configured the apache port to 7200 in http.conf
3) If I use firefox to open the web page, e.g. http://127.0.0.1:7200/test , it can be redirected to http://127.0.0.1:7200/test/ , content loaded successfully.
4) I have configured the WebCache and defined the 'Origin Servers' to be localhost:7200.
5) In the part 'Named Sites Definitions', I have defined the site as www.example.com:80/ , with Origin Server set to localhost:7200.
6) I have defined the 'Site' to be *:*/ , mapping to localhost:7200
7) When I access the the website www.example.com/test/ in a browser outside the server, it works. However, if I use www.example.com/test , the browser shows that the page is redirected to http://127.0.0.1/test/, which creates the error.
See if anyone has any clues about the problem I have here.
Similar Messages
-
Open discoverer report in new browser window and without connections page
Hi All,
We are using Oracle 11g Discoverer 11.1.1.4. Requirement is to open the discoverer report in a new browser window and without connections page.
When we are running discoverer reports with this parameters we unwantedly get the connections page of the discoverer plus which we don't want.
Went through the documentation given in this page and followed it still the issue persists, and i see couple of threads with my issue and no updates.
This excerpt is from the documentation available in the link
" _plus_popup=true and framedisplaystyle=embedded launches Discoverer Plus in a new pop-up browser window that contains the Plus applet embedded in it "
http://www.art2dec.com/documentation/docs/oas10g1012/linux/bi.1012/b13918/urlstart.htm
and Here is what we use to invoke our reports.
http://ipaddress:port/discoverer/plus?cn=cf_123&_plus_popup=TRUE&framedisplaystyle=EMBEDDED&wb=disc_wb_1
Request the forum users from PRO discoverer group to help me out of this issue and expect a good discussion on this.
Thanks in advanceClosing the thread
We were able to achieve by changing the browser settings in the IE 8 Browser. Disabled Tabbed browsing. -
Get "Creation Script" of the existing table ( in SQL database) using C# and without using SMO dlls
Hi All,
I need to get the "Creation Script" of the existing table using c# and without using SMO dlls (is it possible? I don't know).
I.e. In SQL Management Studio -> right click on any table -> Script table as -> Create To - > open in the new query editor window. This will give you the schema of the table with the constraints of the table.
For E.g. In Northwind database, for the table "Categories", I would like to get it as show below
USE [Northwind]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[Categories](
[CategoryID] [int] IDENTITY(1,1) NOT NULL,
[CategoryName] [nvarchar](15) NOT NULL,
[Description] [ntext] NULL,
[Picture] [image] NULL,
CONSTRAINT [PK_Categories] PRIMARY KEY CLUSTERED
[CategoryID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
I would like to get the same schema using c#. Please help.
Thanks & Regards,
Kalai.SMO is the easiest way to get this. This is what Management Studio uses. If you can't use SMO, get a Profiler trace of the queries that SMO executes when generating the script and execute the same using ADO.NET.
Regards,
Farooq Mahmud
Support Escalation Engineer
• Microsoft Health Solutions Group -
Running ITunes 10.6, on a Win7 Home Premium SP1. Just loaded about thirty of my favorite CD's on my user account.
I would like to be able to make all of them available to my other family members in their accounts on my machine, without needing to reload them all and without having to store their disk images multiple times. Can this be done, and if so, how?
And can I copy the contents of a folder across to my wife's WinXP SP3 machine, and have them made available to each of us in our login accts on that machine?
(There are three of us, plus an admin and a backup admin account, on each.)
I will be really grateful if someone can help me do this for my family members, as we have shared the music on these CD's over the years, and I would like to make them available on the desktop for each of us.
Also, I'd like to be able to load them, or a subset of them, to my wife and son's IPods. Any Tips, Traps or Tweaks for that process, as well?
Thanks in advance for any help you can offer.
Not sure about the OS level for the IPods. I am doing this for my wife and son, using an account here created for my son, which he shares with me for support purposes. But I do know they both have IPods, and our PC's and their OS's were described above.You can move the iTunes folder to a separate drive on your pc an then configure each account to use this drive / folder as iTunes library ... The problem is, that iTunes by default stores everything in your personal music folder which is separate for each user account in windows (and by default is on "C" drive).
I create a separate partition on every pc/laptop (and map a drive name) where I store music, videos and other mass data. This will also keep the "C" drive small, which is backed up from time to time and so my backup is also small. -
Print a file to printer wirelessly and without need to use CD drive to install driver?
I have a HP-P1006 printer in my conference room and sometimes my guest want to send print to my printer and I have to connect their laptop with USB cable to my printer and install printer driver thought CD Drive. I want to know if there is a way to print a file to printer wirelessly and without need to use CD drive to install driver? (I don't have a wireless network in my conference room)
Is it possible to automate Adobe Reader to load files, then set the staple property and location, then print them out? I've seen in .NET 3.0 that there is a Enumeration for Stapling in the System.Printing Namespace. I need to figure out how to automate the printing in adobe but right before it prints, have .NET assign the printer and whether it should be stapled or not.
-
Hi all,
I am using Exchange server 2013, my task is to create
Service , that
need's to monitor continuously for new mails of all Mailboxes in
my server. if any user got new mail i need to get that Mail Subject, Mail Body, Sender Email Address [From emailId] .
Limitation
: I don't have Passwords of mailboxes , so i gave all mailbox access permission to one user , then i completed this service using below code.
But now, Client
not willing to give Mailbox Permissions to one user because of security problems.
How can i do this without passwords and without giving permissions to other user ?
i don't want all mailbox access , i just need only
access Mail Subject , Body and Sender mail address .
How can i achieve
this ?
Process i follow
=> I created new user in server , and then i gave full permissions of all Mailboxes to newly created user[ex: james] in database level.
i use below command for giving permissions in database level.
Get-MailboxDatabase -Identity <Database Name> | Add-ADPermission -User <User> -AccessRights GenericAll
=> using below code i am searching unread mails of all user Mailboxes and then getting Subject, body and Sender Email address . here i am have list of users,
ExchangeService service = new ExchangeService(ExchangeVersion.Exchange2013);
service.Credentials = new WebCredentials("[email protected]", "password");
service.AutodiscoverUrl("[email protected]"); foreach (Object obj in usersList) // here i have Mailbox users list in usersList
{ var userMailbox = new Mailbox(obj.user);
var folderId = new FolderId(WellKnownFolderName.Inbox, userMailbox);
SearchFilter.IsEqualTo filter1 = new SearchFilter.IsEqualTo(EmailMessageSchema.IsRead, false);
var itemView = new ItemView(50);
var userItems = service.FindItems(folderId, filter1, itemView);
foreach (var item in userItems)
item.Load();
var senderEmail = ((EmailMessage)item).From;
var subject = item.Subject;
var body = item.Body;You would need to check that possibilities via WebServices but suggest you to post this in Development forum to get help from programmers....
http://social.technet.microsoft.com/Forums/office/en-US/home?forum=exchangesvrdevelopment
Blog |
Get Your Exchange Powershell Tip of the Day from here -
@I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use it more the 2 corrections after a get a black background message that there is not enough memory) and the system stops running and a must restart is required. How do I fix this terrible problem?
If it requires a Photoshop CS5 re-install, (I belief that it may fix the problem) and re-install the two third party plugins (NIK Viveza) and (Onone Perfect Resize) how and where do I get to the proper Adobe upload page to do that.
I have tried to fix this problem by changing the memory allocations, I have spend many hours on it and are very disgusted with it but it needs to be fixed. The current memory settings are;
Ram available = 1588 MB
Range = 873 -1143 MB
Recommended Photoshop usage range = 857 however I have tried every setting to max and in between. Nothing works. Current setting = 1588 (max)
The Photoshop I use is registered, I have product # and order # .Contact NIK for updated/upgraded versions of their plug-ins. They have been having a lot of issues with their plug-ins.
-
What a ding dong, I put my entire question in the subject line. First time user, sorry. My husband purchased desk top Mac, and without importing anything via USB cord, it automatically is picking up my itunes library. He closed out, and signed in with his user id and password, and it still will only pick up mine. Someone told me it is because I have turned on "share wifi" in my itunes account, and need to turn that off first, but cannot figure out how to do it. Any suggestions?
You either have an incredibly complex computer setup or I think you are confusing terminology here. If you have iTunes set to share your library with others in your iTunes preferences then other computers in the area will see it as an item when they are running their iTunes and have it set to check for shared libraries. Your husband is probably seeing this when running iTunes on his computer. You can disable this sharing on your computer and/or he can set his not to pick up shared libraries.
By the way, an iTunes account is something you log into when you want to buy something from Apple. On your computer it is simply your iTunes collection or your iTunes application. So you need to turn off sharing in your iTunes application preferences.
Your husband is seeing "his" iTunes collection when running iTunes, but it is possible he doesn't have anything in it if it is a brand new computer. -
Bex Report with and without BIA . . Fails with a dump EXPORT_TOO_MUCH_DATA
Hi Folks,
We have a report thats has been running well in production for more about 18 months. This month it did not complete execution.
We did implement BIA couple of 4 months back and the run times have drastically reduced after the BIA. Now this query execution results in a Dump with and without BIA. FYI the underlying cube has 195,876,020 records only.
Name of Runtime error: EXPORT_TOO_MUCH_DATA
Short text: Too much data for export.
What happened? Runtime error
The current ABAP program "CL_RSR_CACHE_DO_SPID==========CP" had to be
terminated because one of the statements could not be executed at runtime.
Error analysis: The dataset stored under an EXPORT/IMPORT ID is restricted
by
1. The maximum possible size of 2 GB
2. The length of a data record and the capacity of the sequence counter. This error occurs only if the capacity of the
sequence counter does not go beyond 255.
Source Code Extract:
1 METHOD if_rsr_cache_data_object~get_xstring.
2
3 FIELD-SYMBOLS:
4 <l_xstring> TYPE xstring,
5 <l_sp> TYPE ANY,
6 <l_spinfo> TYPE ANY.
7
8 CREATE DATA r_r_xstring.
9 ASSIGN r_r_xstring->* TO <l_xstring>.
10 ASSIGN n_s_spid-r_sp->* TO <l_sp>.
11 ASSIGN n_s_spid-r_spinfo->* TO <l_spinfo>.
12
13 *... Sp has to be the first component
>>>>> EXPORT sp = <l_sp> spinfo = <l_spinfo>
15 TO DATA BUFFER <l_xstring> COMPRESSION ON.
16
17 ENDMETHOD.
Referred to the below note 0001232573
which says to have 'RSRCACHE_ITAB_COMPR' parameter using report SAP_RSADMIN_MAINTAIN
Note say the below (It might be a little tricky, to find an appropriate value for 'RSRCACHE_ITAB_COMPR' as it heavily depends on the query-specific data structures that are stored in the cache. The general recommendation would be to start with a value of about 5000. Test this with a query, that dumped previously. In case the dump persists reoccurs, reduce the value of the parameter significantly. Otherwise, if no dump occurs but you face noticeably longer runtimes, increase the parameter.)
We are trying not able to get to the right parameter value. (changed it from 5000, 4000, 3000, & 1000) without much help. Did any of you had to change this parameter. How low or High can this parameter be changed?
We would like to understand if changing any other parameters would help in RSADMIN table would help?
Any thoughts from the experts would be appreciated
Thanks,
FHFHi,
Are you running the report for all the selections(all the data )?
execute the report with data selection and check?
Is the data in the Ic - compressed?
Regards
KP -
CS2 Need to set text bounding box to snap to exact measurement, not em size and without leading
I am currently using CS2 working in a sign shop designing signs, banners and vehicle lettering.
When working with text I need to know the exact letter height, not the em and without the leading. I need it exactly the way it would measure if converting the text to outlines. The reason I need this information is that when I output the lettering to a cutter/plotter to cut vinyl media I need to know the exact measurement so I can nest my lettering on my media size. The media is typically 24" wide which gives me 22.5" of available space once the pinch rollers on the machine are considered. Pinch rollers are rollers that engage a knurled driving wheel and "pinches" the media between them and thus guides the media through the plotter. Of course, when using any media one must make the best use of it to avoid making scrap or using more than is needed for the job at hand. Converting text to outlines gives me that measurement.
One time awhile back I did a google search on this and found a one or two button fix that made the bounding box snap to the exact "ruler" height of the text. It worked great. But I got away from design work for a short period. When I returned I'd forgotten the process. Back when I did find it I never bookmarked or made a text file explaining the process and I'm ost in finding it again.
I don't know exactly how I worded the google search but the answer I was looking for came up on the first page. That's probably why I didn't feel the need to bookmark it or write it down. Now, I've googled dozens of different wordings for my question and get nothing. It's likely a nomenclature/jargon issue and I've yet to stumble on it again.
If anyone could help out I would so greatly appreciate it. As it is, when I get to the point that I need to know the exact ruler height of my lettering I convert my text to outlines. But then, as sometimes happens, I'll desire to change the font or try someting different but the text is not live so I'll have to start over with that line of lettering.
I sincerely hope my explanation of my questions makes sense to anyone who might be reading this.Jacob Bugge, you are a blessing. This effect not only saves me time but avoids a lot of frustration when a client wants to change some copy or I commit a spelling error or have some other brain malfunction. Not to mention the sometimes hundreds of single words or number groups I must fit onto an artboard set to my available media space.
Option 2 is exactly what I was looking for and I'll remember it forever now as I've spent parts of the past week searching that answer only to hear over and over again, "You can't do that in Illustrator".
Thank you so much for your quick response! -
Can LabVIEW call a DLL built with VS(2005) C++ with /CLR and Without an Entry Point
My project requires me to convert a C++ program to a DLL and having it called by LabVIEW. Due to the complexity of this C++ program (converted from fortran using f2c -C++ option), it cannot be compiled without using /clr option. I did build the application standalone (/clr), and it functioned fine. When I build it into DLL using VS2005, I was forced to use No Entry point option and without using DllMain in the C++ code. Eventually the DLL was built without error. But after I call it from LabVIEW, I was not getting calculated results as expected. I added a testing function to the C++ code of the DLL and just try to modify a parameter, it will not, but only return the input numbers. I was passing data by pointer and not by value, so I expect this parameter output be modified. I suspect that the DLL didnt get executed at all as it has no entry point specified.
Am I on the right track to approach this task, or I am heading to totally wrong direction here? I believe due to the fact that my C++ was from f2c and use vsf2c.lib and so on, the code is managed code, so that a regular DLL cannot be built from it with an entry point. How can LabVIEW call such a DLL? Am I right on that? I really need your advice here for a right approach to this problem and possible implementation "watch outs"...Thanks!
BryanHi...Finally I was able to compile my code with an entry point defined and without using /clr. I can also call this DLL from LV and got back a variable from a little test function added to the DLL. But the function that was used for my main application in the DLL crashed LV and I got a pop up box from Microsoft Visual C++ Runtime Library: Runtime Error! "This application has requested the Runtime to terminate it in an unusual way, please contact the application's support team for more information". In Visual Studio I also got the following message: (I eliminated most of the "No symbols loaded" messages that are not errors but just info.) I would apprciate if someone can take to look with your more "experienced eyes", many thanks! Bryan.
'LabVIEW.exe': Loaded 'C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2180_x-ww_a84f1ff9\comctl32.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\xpsp2res.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\Shared\nicont.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\Shared\NICONTDT.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\nitaglv.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\lkbrow.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\lkrealt.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\lvdaq.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\lvdesktop.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\lvfp.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\mfc71.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\MFC71ENU.DLL', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\vi.lib\FieldPoint\SubVIs\FPLVMgr.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\lvfprt.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\LvProjectProxy.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\LvRealTimeCoreProvider.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\MVEProvider.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\QtCore4.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\QtXml4.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\QtGui4.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\mxLvProvider.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\nimxlcpp.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\nimxlc.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\variable.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\lvMax.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\MAX\UI Providers\FieldPoint71.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\MathScriptParser.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'Z:\bli\development\projects\galfitDLL\Debug\galfitDLL.dll', Symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.762_x-ww_6b128700\msvcr80.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\mesa.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\mscms.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\icm32.dll', No symbols loaded.
The thread 'Win32 Thread' (0xf94) has exited with code 0 (0x0).
The thread 'Win32 Thread' (0x90c) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xfd0) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0x284) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xdac) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xa98) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0x528) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0x614) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xa5c) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xebc) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0x5cc) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0x700) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xcf0) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xc7c) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0x4c8) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xa4) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0x52c) has exited with code 3 (0x3).
The program '[804] LabVIEW.exe: Native' has exited with code 3 (0x3). -
What is the procedure for a hard boot of my iPod touch 4th generation
without iTunes, and without computer, and without iPod data screen?
6 months after purchase I updated my iPod touch as recommend by iTunes.
It has not worked since that day. It frozen (disabled) with a "connect to
iTunes" icon displayed...that is the only thing it does. itunes does not
recognize the iPod. My Windows7 computer recognizes an Apple device.
Other computers recognize the devise but if iTunes resided on that
computer it did not recognize the iPod
I suffered a setback with deep depression and am just now getting out of it enough to do something. The depression prohibited me from taking action.
I have done every procedure recommended from Apple help and external
sources. I did this thoroughly with help for other owners and IT experts,
Apple employees etc etc. I and associates have perform reboots utilizing a
number procedure using only button on the iPod. These were unsuccessful
also have performed.
Please do not ask me to do the usual.
Online I saw a process using the buttons on the iPod to completely
reformat
the iPod. It was NOT the hold buttons for 10 sec let go of one wait 8 sec
etc. I can not find the process now...a friend showed it to me in passing
I have lost contact with him. This is the procedure, I believe, that with
enable me to update and use the iPod.You need an internet connection and likely a computer with iTunes but an iPhone, iPad or iPod touch with the FindMy iPhone App may work by:
If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
Otherwise
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Yo may have to go to an Apple store or a friend's house with an internet connection and iTunes. -
VA01: Creation of SD order with several material codes,with and without VAT
hi guys,
could someone tell me how to set up the system to not be able to create an SD orders with a mix of VAT condition?
We don't want a sales order with an combination with and without VAT.
Pls advise. Thanks.could someone tell me how to set up the system to not be able to create an SD orders with a mix of VAT condition?
We don't want a sales order with an combination with and without VAT.
H i
1.The Vat ( Tax ) is applicable on basis of Customer and Mareial Tax classification.
2. So as far as material is concerned , group all VAT applicable material in One Division
Say in FMCG Company
Divisions are Soaps , Skin Care , Shampoo etc
Create Sub Divsions say for Eg Soaps-------Soaps 1( Taxable) & Soaps 2 .( Non Taxable ) and acordingly for other divisions
And then Create Sales Areas accordingly.
All this will need Reorganisation of your Sales Area
Regards
Rohit -
Can we goods receipt without material number and without PO?
Can we goods receipt without material number and without PO as consumption ?
I have case that no PO in SAP system (charge to cost center) but need to goods receipt in SAP system.
How should I do?
Thank you very muchHi
Go to MB1C enter 561 movement type (initial posting ) .
Material number is must.
It will be against profit center as it is goods receipt and stock value will be credited to our a/c .
Thanks
Ravi
Edited by: Ravikant Dewangan on Aug 11, 2009 8:38 PM -
I had iPhoto as part of iLife 11. I recently did an erase and install on my Macbook Air and without a CD drive I'm unable to reinstall. How can I install without having to repurchase all of the apps?
Do you have access to another Mac with a disk drive? If so you can do it in one of two ways:
1 - on the Mac with the optical drive launch Disk Utility and make a disk image of the iLife 11 disk. Connect the two Macs together and transfer the disk image to your MacBook Air. Mount the disk image and install from it. I have my iLife disks saved that way for quick and easy reinstall when necessary.
2 - connect the two Mac together so you can access the MBA from the Mac with the disk drive. Insert the iLife disk, and install from the second Mac to the MBA. -
I am a medical transcriptionist. I was using Firefox 4 and without knowing that Firefox 5 does not support Google Toolbar I updated it. Searching in google is a integral part of my job and without the Toolbar I feel handicapped using Firefox 5. You can say that there is no need for toolbar in firefox 5 as the address bar doubles as toolbar, but I find it very difficult using it. I uninstalled Firefox 5 and try installing Firefox 4 version, but I am not able to. So, I have uninstalled Firefox 4 completely. So, pls advise if there is a way for me to get back my Firefox 4. Tx in advance for your help.
-> Uninstalling Firefox on Windows
* http://kb.mozillazine.org/Uninstalling_Firefox
-> Starting with the release of Firefox 5, the previous version of Firefox (Firefox 4 in this case) will no longer be maintained with security and stability updates. Firefox 3.6 is the last previous Firefox version that is still being maintained. To downgrade to Firefox 3.6, download and run its installer from:
* http://www.mozilla.com/en-US/firefox/all-older.html
'''Warning: Firefox 3.6 will only be maintained with security and stability updates for a short period of time.'''
-> Installing Firefox on Windows
* https://support.mozilla.com/en-US/kb/Installing%20Firefox%20on%20Windows
Check and tell if its working.
Maybe you are looking for
-
Whole workgroup (SMB) dies for Macs but not PCs
Hello all, I'm having a very frustrating problem with a mixed Mac (Snow Leopard, all latest updates) and PC (Vista/XP) home network. Normally everything works fine and I can share files and printers between the Macs and PCs (i.e. this is not a simple
-
"cannot resolve symbol" in a Timer !!!Please Help!!!
I am doing a program for a class which involves timers. I am using JCreator and when i try to construct a new timer, the compiler points to the "new" in the line: Timer T1=new Timer(interval, ActionListener); ^ This is what it looks like and the erro
-
Problem in ImageLoading,Please help!
I have a problem in Loading a binary image file which has a header and binary information. I am using the following code to display the image File f = new File("image.Img"); FileInputStream fis = new FileInputStream(f); int pixels = imagewidth;//No o
-
Error 150:30 - Would a reinstall help?
I keep getting error 150:30 when trying to open CS4 now that I've "upgraded" my Mac OS. I know CS4 is unsupported by Yosemite, but would it possibly clear up any of this snafu to uninstall and then reinstall any such older CS software?
-
I need help on the question above would really like to be able to use this phone but cant upgrade if it will delete messages etc anyway to save them from being deleted