Anyone Using NI-SCOPE 3.1 + 5122

Hi ...
I am currently encountering strange effects when using NI-Scope 3.1 with a 5122 (256Mb).
If anyone has the same configuration, would you please mind checking the following:
* Open the example NI Scope EX Multi-Record from the example finder
* Set the setting to lines
* Set the number of records to 2
* Use channel setting: "0:1"
* Perform an acquisition
* Now you should see 4 waveforms, quite neatly aligned
* Now enter the block diagram and there, change 2D DBL to 1D Waveform (the polymorph NI-Scope VI).
* Perform the acquisition
* Does the waveform look the same?
I get three channels which seem to fit, and another one which is constantly zero. Furthermore, the channel which is zero ranges from 0 to 255, wheras the other channels have correct time values.
Thank you for your help.

Thomas,
This is a bug in NI-Scope.  When you fetch multiple records from
multiple channels at the same time with the 1D WDT VI, the last few
records seem to get messed up.  We'll fix the bug for Scope 3.2
(expected next month), which will be available for download.
As a workaround in the meantime, split the fetch into two steps:
  - fetch all the records from channel 0 only
  - fetch all the records from channel 1 only
This won't be substantially less efficient than fetching all channels and records at once.
Alternatively, the other multi-fetch VIs seem to be working fine. 
Try the 1D cluster- it contains the same data as the 1D WDT, just
different types.
I'm really sorry for the inconvenience.  We'll be investigating this immediately.
Patrick

Similar Messages

  • When should use request scope

    hi
    i don't know when i should use request scope, the example is use session scope always.
    Can anyone help me?
    thanks!

    SpiderFromMars wrote:
    > What are the best practices for using the variables
    scope versus using the
    > request scope when assigning variables.
    >
    > In other words, when should I use <cfset variables.x
    = 'barf'> and when
    > should I use <cfset request.x = 'barf'>?
    >
    The variables scope is only accessible in the current
    template. The
    request scope is accessible in the current template and any
    other
    template, such as a custom tag or include file, that is used
    to build
    the current request.
    I.E
    <!---index.cfm--->
    <cfset variable.x = "foo">
    <cfset request.x = "bar">
    <cfoutput>#variable.x##request.x#</cfoutput>
    <cf_myCustomTag>
    <!---myCustomTag.cfm--->
    <cfset variable.x = "bob">
    <cfoutput>#variable.x##request.x#</cfoutput>

  • Is anyone using testing seeing compiler lock-ups? [SOLVED]

    As the title says, is anyone using testing seeing compiler lock-ups? I've been seeing them for about two or three days. Sometimes the system will hang for a few seconds at "Starting make" with 100% CPU usage, then will continue normally. Other times it will stop in the middle of compiling and CPU usage will drop to 0. Also, I've been seeing small hang ups with patches. Maybe four or five seconds when simple patches are being applied. Bringing MAKEFLAGS down to the default 2 from 3 seems to help a tiny bit.

    fakeroot would put it in the right time frame. I linked to your bug report Anarconda as it seems like the same problem. As always if anyone has anything to add, please do:
    http://bugs.archlinux.org/task/13699

  • Is anyone using the Calendar Server to send external invites?

    Is anyone using the Calendar Server to send external invites?
    We have a Mountain Lion server running DNS, Open Directory, File Sharing and VPN. We have recently stood up the Calendar server and it is working very well. Internal invites work fine and are instantaneous to computer, iPhone, iPad. We have the ports working so that calendar items created outside the network work fine as well. Only problem is we cannot invite anyone with an external e-mail address. Each time we do the Calendar Error Log populates with:
    2013-04-15 13:11:03-0500 [-] [mailgateway] 2013-04-15 13:11:03-0500 [Uninitialized] SMTP Client retrying server. Retry: 5 
    2013-04-15 13:11:03-0500 [-] [mailgateway] 2013-04-15 13:11:03-0500 [Uninitialized] SMTP Client retrying server. Retry: 4
    2013-04-15 13:11:03-0500 [-] [mailgateway] 2013-04-15 13:11:03-0500 [Uninitialized] SMTP Client retrying server. Retry: 3
    2013-04-15 13:11:03-0500 [-] [mailgateway] 2013-04-15 13:11:03-0500 [Uninitialized] SMTP Client retrying server. Retry: 2
    2013-04-15 13:11:03-0500 [-] [mailgateway] 2013-04-15 13:11:03-0500 [Uninitialized] SMTP Client retrying server. Retry: 1
    2013-04-15 13:11:03-0500 [-] [mailgateway] 2013-04-15 13:11:03-0500 [Uninitialized] [twistedcaldav.mail.MailHandler#error] Mail gateway failed to send message <[email protected]> from [email protected] to mailto:[email protected] (Reason: Failure with multiple causes.)
    We have set up an internal e-mail address. I have confined that it works fine. I have tried more than one internal account. I have also verified the settings through the command line by typing "sudo serveradmin settings calendar" The iMIP sending and receiving information is correct. There is no authentication type setting listed in the command line output even though there's a place to choose it in the Enable invitations by email - Edit button on the third screen. No matter what I choose it goes back to "login" and still doesn't work.
    The command line settings mention a port number 62310 as being the MailGatewayPort but opening that port on the network's firewall makes no difference. As I said external set up works fine from Mac/iPhone/iPad and push notification works fine as well.
    Is anyone using this functionality?

    I'm sorry. I forgot to add Mail to the list of services. I AM using mail on that server. Here's the iMIP portion of my settings output from Terminal.
    calendar:Scheduling:iMIP:Sending:Server = "boardwalkserver.kuhnwitt.com"
    calendar:Scheduling:iMIP:Sending:UseSSL = yes
    calendar:Scheduling:iMIP:Sending:Username = "calendarserver"
    calendar:Scheduling:iMIP:Sending:Address = "[email protected]"
    calendar:Scheduling:iMIP:Sending:Password = "password"
    calendar:Scheduling:iMIP:Sending:Port = 465
    calendar:Scheduling:iMIP:Enabled = yes
    calendar:Scheduling:iMIP:MailGatewayPort = 62310
    calendar:Scheduling:iMIP:Receiving:Server = "boardwalkserver.kuhnwitt.com"
    calendar:Scheduling:iMIP:Receiving:UseSSL = yes
    calendar:Scheduling:iMIP:Receiving:Username = "calendarserver"
    calendar:Scheduling:iMIP:Receiving:PollingSeconds = 30
    calendar:Scheduling:iMIP:Receiving:Type = "imap"
    calendar:Scheduling:iMIP:Receiving:Password = "password"
    calendar:Scheduling:iMIP:Receiving:Port = 993
    calendar:Scheduling:iMIP:AddressPatterns:_array_index:0 = "mailto:.*"
    calendar:Scheduling:iMIP:MailGatewayServer = "localhost"
    So Add mail to the services being used. Since Calendar is running on the mail server one would assume that it could communicate with it fairly easily.

  • Cant able to get the output while using session scope

    Hi
    I am using jdeveloper 11.1.1.5
    As i posted in the previous post i had made some changes still i am not getting proper output
    These are steps that i had followed for developing login page
    1.I had created a TaskFlow in adfc-config.xml such that if the login is success it navigates to the other page pls verfiy the link
    http://www.4shared.com/photo/5PNrf1hd/E028_2.html
    2.I had also changed the scope to session in adfc-config.xml
    http://www.4shared.com/photo/HtVVOw_B/E029.html
    3.This was my Welcome.jspx code
    <?xml version='1.0' encoding='UTF-8'?>
    <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
              xmlns:f="http://java.sun.com/jsf/core"
              xmlns:h="http://java.sun.com/jsf/html"
              xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
      <jsp:directive.page contentType="text/html;charset=UTF-8"/>
      <f:view>
        <af:document id="d1" binding="#{sessionScope.backing_welcome.d1}">
          <af:form id="f1" binding="#{sessionScope.backing_welcome.f1}">
            <af:inputText label="UserName" binding="#{backing_welcome.it1}"
                          id="it1" value="#{sessionScope.backing_welcome.auser}"/>
            <af:inputText label="Password" binding="#{backing_welcome.it2}"
                          id="it2"
                          value="#{sessionScope.backing_welcome.apassword}"/>
            <af:commandButton text="Login"
                              binding="#{backing_welcome.cb1}" id="cb1"
                              action="#{backing_welcome.cb9_action}"/>
          </af:form>
        </af:document>
      </f:view>
      <!--oracle-jdev-comment:auto-binding-backing-bean-name:backing_welcome-->
    </jsp:root>3.This was my welcome.java backing bean for welcome.jspx page
        public String getAuser() {
            return auser;
        public void setApassword(String apassword) {
            this.apassword = apassword;
        public String getApassword() {
            return apassword;
        public String cb9_action() {
            String returnStr="error";
            System.out.println("Inside loginBtn_action");
            BindingContainer bindings = getBindings();
            OperationBinding operationBinding = bindings.getOperationBinding("checkLoginCredentials1");
            operationBinding.getParamsMap().put("p_user", auser);
            operationBinding.getParamsMap().put("p_pwd", apassword);
        operationBinding.execute();
        Object result = operationBinding.execute();
        if (!operationBinding.getErrors().isEmpty()) {
            returnStr= "success";
        System.out.println("returnStr= " + returnStr);
               return returnStr;
        }While i run my program no output is displayed!! No logs also been recorded!!
    Could any body pls help me!!

    thank you jhon!
    If i am not using any binding i m getting error as
    javax.el.PropertyNotFoundException: Target Unreachable, 'backing_welcome' returned nullI had used this jspx code
    <?xml version='1.0' encoding='UTF-8'?>
    <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
              xmlns:f="http://java.sun.com/jsf/core"
              xmlns:h="http://java.sun.com/jsf/html"
              xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
      <jsp:directive.page contentType="text/html;charset=UTF-8"/>
      <f:view>
        <af:document id="d1" >
          <af:form id="f1" >
            <af:inputText label="UserName"
                          id="it1" value="#{sessionScope.backing_welcome.auser}"/>
            <af:inputText label="Password"
                          id="it2"
                          value="#{sessionScope.backing_welcome.apassword}"/>
            <af:commandButton text="Login"
                               id="cb1"
                              action="#{sessionScope.backing_welcome.cb9_action}"/>
          </af:form>
        </af:document>
      </f:view>
      <!--oracle-jdev-comment:auto-binding-backing-bean-name:backing_welcome-->
    </jsp:root>Give me some guide how to use session scope!! Since i read all the documents i m not getting any proper output

  • Has anyone used JAAS with WebLogic?

    Has anyone used JAAS with Weblogic? I was looking at their example, and I have a bunch of questions about it. Here goes:
    Basically the problem is this: the plug-in LoginModule model of JAAS used in WebLogic (with EJB Servers) seems to allow clients to falsely authenticate.
    Let me give you a little background on what brought me to this. You can find the WebLogic JAAS example (to which I refer below) in the pdf: http://e-docs.bea.com/wls/docs61/pdf/security.pdf . (I believe you want pages 64-74) WebLogic, I believe goes about this all wrong. They allow the client to use their own LoginModules, as well as CallBackHandlers. This is dangerous, as it allows them to get a reference (in the module) to the LoginContext's Subject and authenticate themselves (i.e. associate a Principal with the subject). As we know from JAAS, the way AccessController checks permissions is by looking at the Principal in the Subject and seeing if that Principal is granted the permission in the "policy" file (or by checking with the Policy class). What it does NOT do, is see if that Subject
    has the right to hold that Principal. Rather, it assumes the Subject is authenticated.
    So a user who is allowed to use their own Module (as WebLogic's example shows) could do something like:
    //THEIR LOGIN MODULE (SOME CODE CUT-OUT FOR BREVITY)
    public class BasicModule implements LoginModule
    private NameCallback strName;
    private PasswordCallback strPass;
    private CallbackHandler myCB;
    private Subject subj;
             //INITIALIZE THIS MODULE
               public void initialize(Subject subject, CallbackHandler callbackHandler, Map sharedState, Map options)
                      try
                           //SET SUBJECT
                             subj = subject;  //NOTE: THIS GIVES YOU REFERENCE
    TO LOGIN CONTEXT'S SUBJECT
                                                     // AND ALLOWS YOU TO PASS
    IT BACK TO THE LOGIN CONTEXT
                           //SET CALLBACKHANDLERS
                             strName = new NameCallback("Your Name: ");
                             strPass = new PasswordCallback("Password:", false);
                             Callback[] cb = { strName, strPass };
                           //HANDLE THE CALLBACKS
                             callbackHandler.handle(cb);
                      } catch (Exception e) { System.out.println(e); }
         //LOG THE USER IN
           public boolean login() throws LoginException
              //TEST TO SEE IF SUBJECT HOLDS ANYTHING YET
              System.out.println( "PRIOR TO AUTHENTICATION, SUBJECT HOLDS: " +
    subj.getPrincipals().size() + " Principals");
              //SUBJECT AUTHENTICATED - BECAUSE SUBJECT NOW HOLDS THE PRINCIPAL
               MyPrincipal m = new MyPrincipal("Admin");
               subj.getPrincipals().add(m);
               return true;
             public boolean commit() throws LoginException
                   return true;
        }(Sorry for all that code)
    I tested the above code, and it fully associates the Subject (and its principal) with the LoginContext. So my question is, where in the process (and code) can we put the LoginContext and Modules so that a client cannot
    do this? With the above example, there is no Security. (a call to: myLoginContext.getSubject().doAs(...) will work)
    I think the key here is to understand JAAS's plug-in security model to mean:
    (Below are my words)
    The point of JAAS is to allow an application to use different ways of authenticating without changing the application's code, but NOT to allow the user to authenticate however they want.
    In WebLogic's example, they unfortunately seem to have used the latter understanding, i.e. "allow the user to authenticate however they want."
    That, as I think I've shown, is not security. So how do we solve this? We need to put JAAS on the server side (with no direct JAAS client-side), and that includes the LoginModules as well as LoginContext. So for an EJB Server this means that the same internal permission
    checking code can be used regardless of whether a client connects through
    RMI/RMI-IIOP/JEREMIE (etc). It does NOT mean that the client gets to choose
    how they authenticate (except by choosing YOUR set ways).
    Before we even deal with a serialized subject, we need to see how JAAS can
    even be used on the back-end of an RMI (RMI-IIOP/JEREMIE) application.
    I think what needs to be done, is the client needs to have the stubs for our
    LoginModule, LoginContext, CallBackHandler, CallBacks. Then they can put
    their info into those, and everything is handled server-side. So they may
    not even need to send a Subject across anyways (but they may want to as
    well).
    Please let me know if anyone sees this problem too, or if I am just completely
    off track with this one. I think figuring out how to do JAAS as though
    everything were local, and then putting RMI (or whatever) on top is the
    first thing to tackle.

    Send this to:
    newsgroups.bea.com / security-group.

  • Anyone using an HP LaserJet Pro CP1525nw printer with SL?

    I'm thinking of getting this printer. Can anyone using this with Snow Leopard please let me know how well it works? Any issues? Nice printer? I will be replacing a Samsung CLP-315 which prints very nicely, but doesn't work well after updating from Tiger to SL.
    Thanks

    It works just fine.  I picked up a 1525 yesterday, configured it using Lion, and I just now configured my wife's SL laptop to work with it.  No problems.  Just don't install the HP disk and let OS-X grab drivers for it and you should be fine.
    It's a little tricky configuring with Lion for wireless printing, but it's doable.  See my post at https://discussions.apple.com/thread/3449512 for a checklist.

  • Does anyone use a LaCie external hard drive with their Mac using imovie '09?  I have some questions.

    Does anyone use a LaCie external hard drive with their Mac using imovie '09?  I have some questions.

    Are you actually having a problem with the new Lacie drive, or are you just asking is the Lacie drive somehow different from your old G-Drive?
    From a connection standpoint, most Lacie desktop drives have both USB and FireWire connections, just like the G-Drives do.  You would connect and use it the same as a G-Drive.
    Regarding capturing to the external HD, if you are using a camcorder that has FireWire (iLink) connection, it is not advisable to have an external FireWire HD connected to your Mac at the same time as your camcorder; there are often communication conflicts between the camcorder and the hard drive if they are connected at the same time.  The conflicts usually appear as either dropped frames or a complete freeze.   This is more common with Canon miniDV camcorders but I have also seen this behavior with Sony miniDV camcorders.  (The problem is the camcorder's FW implementation, not the hard drive.)  The workaround is to capture to your Mac's internal HD and later copy the captured video to your external HD.

  • Has anyone used a Dell 1908FPb with a MacBook Pro OSX 10.6.8?  What do I need to get/do?  thanks

    Has anyone used a Dell 1908FPb with a MacBook Pro OSX 10.6.8?  What do I need to get/do?  thanks

    Hi 4judy,
    If you are looking to use an external display with your MacBook Pro, you may find the following articles helpful:
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    http://support.apple.com/kb/ht3382
    OS X: How to use multiple displays with your Mac in Mountain Lion and earlier
    http://support.apple.com/kb/ht5019
    Regards,
    - Brenden

  • Has anyone used reMIDI as a plug-in for GarageBand. I downloaded a trial version of reMIDI, which enables MIDI instruments to be strummed or arpegiated, but can't get it to work in Garageband.  How do I set it up?

    Has anyone used reMIDI as a plug-in for Garageband ('08)? The program allows MIDI instruments to be strummed or arpegiated. I have a trial version, but can't get it to work in Garageband. Wonder how to set it up.
    Thanks, Doctor Mark

    Port Forwarding.....or Port Mapping....as Apple calls it is a difficult and complex configuration method for most users. Because there are so many variables involved in this type of setup, it is not possible to provide a step by step guide that will work for everyone with all devices.
    It is possible that a setup guide exists for the the WD drive and AirPort Extreme, but you will have to go looking for it on the Internet. Even if you find one, it may not be tailored to your specific situation or needs.
    Sometimes, you can do everything right....at least according to someone's article or "how to" guide, and things still will not work correctly.
    In situations like this, when you really don't know what to do, you need to enlist the aid of an IT pro, who will know what to do based on your particular products and unique circumstances. Sometimes....they won't be able to get things working either due to particular circumstances.
    But, before you do this, I would strongly recommend that you use a Static IP address for your Internet connection with your ISP. If you do not have this now, contact them to ask them if they offer this type of connection. Expect to pay more for this type of service, of course.

  • Anyone using Blackmagic Intensity Pro with Premiere CS4

    I've looked through the threads and have seen similar postings, but no real good answers. Is anyone using Blackmagic Intensity Pro to viiew timeline on a HDTV using the HDMI connector?
    I purchasedf the Intensity Pro and can't get it to work with CS4. Any assistance would be appreciated.

    If you're using a Core i7 processor, one of the problems might be with the motherboard.  There's only one Intel board that BM has approved (sorry, don't have the model in front of me -- on a piece of scratch paper in my wife's car).
    I'm looking to build a new system myself and have been looking at the Intensity Pro card as well.  The main feature I'm looking for is real-time preview and program output to an HD monitor that I'd hook up via HDMI.  I probably also would use it to capture analog sources for audio and video.  I don't have any interest in BM's lossless data capture as it creates monster-sized files.  That's why I was also planning to add Cineform once it's fully approved and working for CS4.  However, as best as I can tell, the Intensity Pro card doesn't recognize the Cineform codec on the timeline.  Does anyone know if and how well these two will function together within Premiere?  (I'm also assuming that the new 4.1 release might make these types of Premiere add-ons work better.)
    Thanks.

  • When to use which scope

    Hi,
    I have a CRUD application.. Where in the data is fetched, displayed n edited n stored back to db. Also there is a sequential access between pages & the information entered on the first page is needed on the second page & so forth. What would be the best scope & why ?
    When to use which scope? What is the life-cycle of each scope.
    Also, I couldn't find any good tutorial on scopes. If you are aware of the same, please guide.
    Its urgent.
    Thanks in advance.

    921331 wrote:
    Hi,
    I have a CRUD application.. Where in the data is fetched, displayed n edited n stored back to db. Also there is a sequential access between pages & the information entered on the first page is needed on the second page & so forth. What would be the best scope & why ?
    When to use which scope? What is the life-cycle of each scope.
    Also, I couldn't find any good tutorial on scopes. If you are aware of the same, please guide.
    Its urgent.
    Thanks in advance.You could use ViewScope and parameters to the next view or if using CDI have a look at conversation scope. You should read about them in detail yourself because even if someone chooses one for you it's still you who has to go on to use it correctly.

  • What is use of SCOPE OF LIST in PO replorts.?

    Hi guru's
    Can anybody explain me , what is ithe use of scope of list in Reporting PO,like, me2n.me2l,me2m..etc
    If i want to add new scope of list , what are all configuration part for that, where i want to assign it..?
    Good solution will be rewardable..
    Thanks
    sap-mm

    Hi,
    Scope of List is defines the type of output which will be displayed. e.g It can be ALV display, it can be hierarchial dispaly.
    Each of these dispalys have their own properties and advantages and disadvantages. Hence, SAP has provided various option to the users to choose the kind of dispaly he wants.
    I dont think so there is any customisation for maintaining the entries to this scope of list. The values in the drop down are the options provided by SAP.
    Regards,
    Vishal

  • What kind of throughput should I expect? Anyone using AQ in high volume?

    Hi,
    I am working with AQ in a 10.2 environment and have been doing some testing with AQ. What I have is a very simple Queue with 1 queue table. The queue table structure is:
    id number
    message varchar(256)
    message_date date
    I have not done anything special with storage paramteres, etc so it's all defalt at this point. The I created a stored procedure that will generate messages given message text and number of times to loop. When I run this procedure with 10,000 iterations it runs in 15 seconds (if I commit all messages at the end) and 24 seconds if I commit after each message (probabliy more realistic).
    Now, on the same database I have a straight table that contains one column (message varchar(256)). I have also created a similiar storage procedure to insert into it. For this, 10,000 inserts takes about 1 second.
    As you can see there is an order of magnitude of difference so I am looking to see if others have been able to achieve higher throughput than 500-700 messages per second and if so what was done to achieve it.
    Thanks in advance,
    Bill

    Yes, I have seen it. My testing so far hasn't even gotten to the point of concurrent enqueue/dequeue. So far I have focused on enqueue time and it is dramatically slower than a plain old database table. That link also discussed mutliple indexed organized tables being created behind the scenes. I'm guessing that the 15X factor I am seeing is because of 4 underlying tables, plus they are indexed organized which adds additional overhead.
    So my question remains - Is anyone using AQ for high volume processing? I suppose I could create a bunch of queues. However, that will create additional management on my side which is what I was trying to avoid by using AQ in the first place.
    Can one queue be served by multiple queue tables? Can queue tables be partitioned? I would like to minimize the number of queue so that the dequeue processes don't have to contain multiplexed logic.
    Thanks

  • Waves 5.9.7.. anyone using it with L8?

    Hi,
    Trying to update my waves plugs (I have the musician II bundle and the NPP bundle). I noticed on their site it mentions the 5.9.7 update, that is also Leopard compatible. Is anyone using this new version of waves with Logic 8? I'm curious if I should wait on updating my plugs until all the kinks are out.
    Thanks;
    J.

    Does FCP still take 30-45 minutes to load the Waves bundle? In my experience, it would launch eventually on some version combinations...
    Even if you can use them in FCP, you would still see the numerical effects tab interface, instead of the nice skins you see in Logic. But at least you don't have to remember to drag them out of the plugins folder each time you want to launch FCP...
    I'm interested about this because I teach FCP at a school where Logic, Pro Tools, and the Waves bundles are on the same student workstations - We'd have to move those Waves files around at the start and end of every class.
    Message was edited by: Max Average

Maybe you are looking for

  • Compilations No Longer Work For Videos

    Hi, Pre iTunes 12, it was possible to group videos together by checking the 'part of of a compilation'. So, for example, you had the Harry Potter films, instead of having separate films, you could use the compilation option and assign each film a dis

  • Preview app won't export or 'save as'

    Suddenly it's no longer possible to use the 'export' feature (which used to be 'save as') on preview. It just hangs. I suspect it's trying to save to icloud (which I do not want, but I don't see anyway of making this clear in a preference panel).  Th

  • Connect iMac 24" with a Surfborad 4101

    How do I should connect my new imac 24" with the SURFboard 4101 that I already use with a PC? Many thanks for your kind support

  • MS Active Directory LDAP Authentication/Locking Issue.

    Dear All, We are a software company; we have implemented feature of LDAP Authentication in our product using Java API and its working fine from our network environment. We have used following things with LDAP feature. 1. User Authentication. 2. Locki

  • Single Path Selection Lag Illustrator CS4

    Running OSX on a MacBook Pro Illustrator CS4 up to date 4gb Ram No significant performance issues anywhere else. Does this happen to anyone else? Draw a path.  Deselect the path.  Use a single click to select the path with the selection tool. For me