Buling a new Web Application using JSF and Ajax.

Hello Group,
I am a building a new web application using JSF and AJAX. Planning to use Myfaces Tomahawk, Dojo for Ajax, Hibernate, Spring,Eclipse IDE and Jetty Server.Can some one please suggest me will this be a right one for
building complex UI and will it support for using the jsf features and would like to know any other free open
source framework, ide, tools which support the best way for an agile project..?. There is restriction like i have to use java1.4

jaisheela wrote:
Hello Friends,
I am also in the same situation.
I am a building a new web application using JSF and AJAX.
Requirement is I need to use IBM version of DOJO and JSF but I need to develop the whole application using Eclipse 3.3,2 and Tomcat 5.5.
With IBM version of DOJO and JSF, will Eclipse and Tomcat help to speed up the development or do you suggest me to go for Rational Application Developer and WebSphere Application Server.
If I need to go with RAD and WAS, then I am new to RAD and WAS, is it easy to use RAD and WAS for this kind of application and implement web applicaiton fast.
Any feedback will be great help.Those don't sound like requirements of the system to me. They sound more like someone wants to improve their CV/resume
From what I've read recently, if it's just fast you want, look at Ruby on Rails

Similar Messages

Building a best practice web application using ColdFusion and Jave EE

I've been tasked with rewriting a software using ColdFusion. I cannot seem to find a lot of information on best practice development in ColdFusion. I am an experience Java developer who has never used ColdFusion before. I want to build this application using a synergy of ColdFusion and Java EE technologies. Can someone recommend me a book that outlines how to developer in ColdFusion? Ideally this book assumes the reader is an experienced developer with no exposure to ColdFusion. Ideally the methods outlined in the book are still "best practice" methods.

jaisheela wrote:
Hello Friends,
I am also in the same situation.
I am a building a new web application using JSF and AJAX.
Requirement is I need to use IBM version of DOJO and JSF but I need to develop the whole application using Eclipse 3.3,2 and Tomcat 5.5.
With IBM version of DOJO and JSF, will Eclipse and Tomcat help to speed up the development or do you suggest me to go for Rational Application Developer and WebSphere Application Server.
If I need to go with RAD and WAS, then I am new to RAD and WAS, is it easy to use RAD and WAS for this kind of application and implement web applicaiton fast.
Any feedback will be great help.Those don't sound like requirements of the system to me. They sound more like someone wants to improve their CV/resume
From what I've read recently, if it's just fast you want, look at Ruby on Rails

Deploy web applications using JSF 1.2 or JSF 2.0 to WLS 10.3.5

Hello,
We have ADF web applications developed with JDeveloper 11.1.1 (using JSF 1.2 and JSTL 1.1)
deployed on WebLogic server 10.3.4.
Our department plans to :
1. upgrade to WebLogic server 10.3.5 with the ADF Runtime 11.1.2.0.
and
2. develop new ADF web applications using JDeveloper 11.1.2 (using JSF 2.0 and JSTL 1.2)
My 2 questions are the following:
1. Can we deploy all JSF 1.2, JSF 2.0, JSTL 1.1, and JSTL1.2 WAR files on the
WebLogic server 10.3.5 with the ADF Run-time 11.1.2.0.
2. Can we deploy existing ADF web applications developed with JDeveloper 11.1.1 (using JSF 1.2 ,JSTL 1.1)
and new ADF web applications using JDeveloper 11.1.2 (using JSF 2.0 and JSTL 1.2) to the WebLogic server 10.3.5 with the ADF Runtime 11.1.2.0
Any insights will be greatly appreciated.
Thanks

1) That should work
2) old adf app (developed with jdve 11.1.1.x.0) need to be migrated to jdev 11.1.2
You can also check out my blog entry about the jdev wls versions here http://tompeez.wordpress.com/2011/09/14/jdeveloper-versions-vs-weblogic-server-versions
Timo

Opening new web page using servlet and jasper report. ?

Hello,
I am developing one small web application and implementing jasper report in it. I am using jasper report with servlet. Which is generating one pdf file and displaying in same browser. But I want to open this report in new browser. Which is only display that report window. I am trying it. response.setContentType("application/pdf");
               /response.addHeader("Content-Disposition", "attachment; filename=" // this is basically for downloading pdf file.
                         + request.getParameter("D:/rnext/30-oct-2009/sms/web/jsp/Reports/allstudentsofwholecollege.jasper") + "");
      response.setContentType("application/pdf");
      response.setContentLength(bytes.length);
      servletOutputStream.write(bytes, 0, bytes.length);
      servletOutputStream.flush();
      servletOutputStream.close();In this code it is showing me attachement file of report.
When I changed the response.addHeader(Content-Disposition", "inline; filename=" // this is basically for downloading pdf file.)
It is opening in same window. Please help if you can. It is urgent. please help.
Thanks in advance.
Manveer

Use target attribute with link you have placed on you JSP page. [Look Here|http://www.w3schools.com/tags/att_a_target.asp]
Also remove Content-Disposition header if you want to open file in browser.
In latest browsers it might be possible you will see new tab opened rather then whole new browser window, This depends on browser settings.

Composing mail from email web application using jsp and custom tags

here is the send.jsp file
<%@ page language="java" %>
<%@ page errorPage="errorpage.jsp" %>
<%@ taglib uri="http://java.sun.com/products/javamail/demo/webapp"
prefix="javamail" %>
<html>
<head>
     <title>JavaMail send</title>
</head>
<body bgcolor="white">
hi
<javamail:sendmail
recipients="<%= request.getParameter(\"to\") %>"
sender="<%= request.getParameter(\"from\") %>"
subject="<%= request.getParameter(\"subject\") %>">
<%= request.getParameter("text") %>
</javamail:sendmail>
<h1>Message sent successfully</h1>
</body>
</html>
Here is the java file i.e used to refer to this custom tag
package taglib;
import java.util.*;
import java.net.*;
import javax.mail.*;
import javax.mail.Authenticator;
import javax.mail.internet.*;
import javax.servlet.jsp.*;
import javax.servlet.jsp.tagext.*;
* Custom tag for sending messages.
public class SendTag extends BodyTagSupport {
private String body;
private String cc;
private String host;
private String recipients;
private String sender;
private String subject;
* host attribute setter method.
public void setHost(String host) {
this.host = host;
System.out.println("Host is : " +host);
* recipient attribute setter method.
public void setRecipients(String recipients) {
this.recipients = recipients;
System.out.println("recipients is " +recipients );
* sender attribute setter method.
public void setSender(String sender) {
this.sender = sender;
System.out.println("Sender is : " +sender);
* cc attribute setter method.
public void setCc(String cc) {
this.cc = cc;
* subject attribute setter method.
public void setSubject(String subject) {
this.subject = subject;
System.out.println("subject is : " +subject);
* Method for processing the end of the tag.
public int doEndTag() throws JspException {
     System.out.println(" ** In do end tag");
Properties props = System.getProperties();
try {
if (host != null)
props.put("mail.smtp.host", host);
else if (props.getProperty("mail.smtp.host") == null)
props.put("mail.smtp.host", InetAddress.getLocalHost().
getHostName());
} catch (Exception ex) {
throw new JspException(ex.getMessage());
Session session = Session.getDefaultInstance(props,null);
     Message msg = new MimeMessage(session);
     InternetAddress[] toAddrs = null, ccAddrs = null;
try {
     if (recipients != null) {
     toAddrs = InternetAddress.parse(recipients, false);
     msg.setRecipients(Message.RecipientType.TO, toAddrs);
     } else
     throw new JspException("No recipient address specified");
if (sender != null)
msg.setFrom(new InternetAddress(sender));
else
throw new JspException("No sender address specified");
     if (cc != null) {
ccAddrs = InternetAddress.parse(cc, false);
     msg.setRecipients(Message.RecipientType.CC, ccAddrs);
     if (subject != null)
     msg.setSubject(subject);
     if ((body = getBodyContent().getString()) != null)
     msg.setText(body);
else
msg.setText("");
Transport.send(msg);
} catch (Exception ex) {
throw new JspException(ex.getMessage());
return(EVAL_PAGE);
all the entries in taglib.tld and web.xml are correct.
It is one of the article given at this url:
http://java.sun.com/developer/technicalArticles/javaserverpages/emailapps/

First, you should not take copyrighted code and post it without a copyright.
The code you posted is copyright Sun Microsystems.
Second, why did you post it? Did you have a question?

How to customize events, execute stored procedures using JSF and ADF BC

As a java beginner, I started with developing simple web application using JSF and ADF business component through visual and declarative approach. I need to know how to customize events, execute stored procedures, invoke functions on triggering events associated with rich controls. for eg. how to write customized functions on button click or checkbox click events to achieve business requirement and can be modified whenever required.
Edited by: 792068 on Aug 31, 2010 9:40 PM

Which business layer is prefered to create interactive data model: 1. ADF business components or 2. Enterprise JavaBeans using Java persistance API (JPA) or 3. Toplink 4. Portlets
which minimizes writing low level codes and how much OOPS knowledge is required for creating above business layer binding data to viewcontroller layer?

Remove configuration custom STS with old web application using powershell ?

HI
i configured a custom sts with sharepoint 2010 web application using following commands,
$cert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2("c:\signing.cer")
$map1 = New-SPClaimTypeMapping -IncomingClaimType "http://schemas.xmlsoap.org/ws/2005/05/identity/claims/emailaddress" -IncomingClaimTypeDisplayName "EmailAddress" –SameAsIncoming
$map2=New-SPClaimTypeMapping -IncomingClaimType "http://schemas.microsoft.com/ws/2008/06/identity/claims/role" -IncomingClaimTypeDisplayName "Role" –SameAsIncoming
$realm=”http://claimauthweb/_trust/default.aspx”
$ap=New-SPTrustedIdentityTokenIssuer -Name "SimplePassiveSTS" -Description "A simple Asp.Net STS on DevBox." –Realm $realm -ClaimsMappings $map1,$map2 -ImportTrustCertificate $cert -SignInUrl "https://devbox/SimpleSTS/default.aspx" -IdentifierClaim $map1.InputClaimType
after that i create the new web application with claimauthweb and selected trusted identity provider.
but when i create again new web application with different name and ip , after when i login to new web application using custom
sts it redirects to sts login page and after it goes to claimauthweb application not the new web application.
so here how i unregister with old web application and again register sts with new web applicatio?
adil

I believe if you want to run this you will need to remove the provider from all Web Applications in CA. Then you should be able to run Remove-SPTrustedIdentityTokenIssuer.
If this is helpful please mark it so. Also if this solved your problem mark as answer.

How can I develop a web application using EJB design pattern?

I have searched over the web and found quite a lot of tutorials on how to use the EJB design pattern.
I know that there will be a home interface, EJB object interface and a SessionBean.
But the tutorials often only cover a single class, this made me unable to get a complete picture of how EJB design pattern can be implemented into a whole system.
I am now required to devleop an online shopping web application using EJB and JSP page.
I think I will need to create a lot of classes: Member, ShoppingCart, Product...etc.
What I want to ask is that, do I need to create a home interface, EJB object interface and a SessionBean for each of these classes?
I really need some ideas on how to develop this system using EJB + JSP pages.
Many thanks to you all.

For every EJB that you want to create, you will need to code a home and remote interface and a bean class.
You could start getting your ideas here
http://www.theserverside.com/books/wiley/masteringEJB/
http://www.coreservlets.com

For a new web application project - Struts OR JSF ?

Hi ,
We are starting a new web application project and want to decide whetehr to us Struts or JSF ?
Currently, mots of the other development teams are using Struts .
We need to know pros and cons of each to decide one way or the other.
Any help is appreciated .
Thanks

Those are the articles and presentation about this topic:
http://homepage1.nifty.com/algafield/barcia.html
http://www.jroller.com/comments/dgeary/Weblog/top_ten_reasons_to_prefer
http://websphere.sys-con.com/read/46516.htm
http://www.pjug.org/JavaServerFaces.pdf
Sergey : http://jsfTutorials.net

Unable to create a new Central Administration web application using New-SPCentralAdministration

for some reason the Central administration web application is no more accessible, and i will get the following error when i try accessing it, this problem happened after i delete a web application using the central administration UI:-
so i open the IIS , and i find that the CA web application exists and also its physical path as follow:-
so i am not sure why i can not access the CA web application any more. i try running the following command to create a new CA web application :-
New-SPCentralAdministration -Port 31546 -WindowsAuthPr
ovider "NTLM"
but this did not solve the problem. can anyone advice how i can have my CA web application running again?

now i removed the CA web application 7/2014 16:01:47.62 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.62 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.62 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.62 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.62* w3wp.exe (0x0AEC) 11/27/2014 16:01:47.62* w3wp.exe (0x0AEC) 11/27/2014 16:01:47.62* w3wp.exe (0x0AEC) 11/27/2014 16:01:47.62* w3wp.exe (0x0AEC) 11/27/2014 16:01:47.62* w3wp.exe (0x0AEC) 11/27/2014 16:01:47.62* w3wp.exe (0x0AEC) 11/27/2014 16:01:47.62* w3wp.exe (0x0AEC) 11/27/2014 16:01:47.62* w3wp.exe (0x0AEC) 11/27/2014 16:01:47.62 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.62 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.62 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.63 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.63* w3wp.exe (0x0AEC) 11/27/2014 16:01:47.63 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.63* w3wp.exe (0x0AEC) 11/27/2014 16:01:47.63 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.63* w3wp.exe (0x0AEC) 11/27/2014 16:01:47.63* w3wp.exe (0x0AEC) 11/27/2014 16:01:47.63 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.63 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.63 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.63 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.63 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.63 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.63 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.63 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.63 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.65 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.65 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.65 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.65 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.65 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.65 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.71 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.71 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.71 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.71 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.71 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.71 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.71 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.71 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.71 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.71 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.71 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.71 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.71 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.71 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.71 w3wp.exe (0x0AEC) 11/27/2014 16:01:47.71 w3wp.exe (0x0AEC) can anyone advice on this please from IIS , and then i run the configuration wizard, whch have create a new CA. but when i try accessing it i got the same problem , here is the related logs :-
0x0F20 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (GET:http://tgvstg01:31546/default.aspx)). Parent No
0x0F20 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://tgvstg01:31546/default.aspx) 9842d09c-5c06-d003-e007-3ec8b83ab2e5
0x0F20 SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 9842d09c-5c06-d003-e007-3ec8b83ab2e5
0x0F20 SharePoint Foundation Files ak8dj High UserAgent not available, file operations may not be optimized. at Microsoft.SharePoint.SPFileStreamManager.CreateCobaltStreamContainer(SPFileStreamStore spfs, ILockBytes ilb, Boolean copyOnFirstWrite, Boolean disposeIlb) at Microsoft.SharePoint.SPFileStreamManager.SetInputLockBytes(SPFileInfo& fileInfo, SqlSession session, PrefetchResult prefetchResult) at Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBufferFactory.CreateFromDocumentRowset(Guid databaseId, SqlSession session, SPFileStreamManager spfstm, Object[] metadataRow, SPRowset contentRowset, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres) at Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow(Int32 rowOrd, Object ospFileStmMgr, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres... 9842d09c-5c06-d003-e007-3ec8b83ab2e5
0x0F20 SharePoint Foundation Files ak8dj High ...) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, ... 9842d09c-5c06-d003-e007-3ec8b83ab2e5
0x0F20 SharePoint Foundation Files ak8dj High ...Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbst... 9842d09c-5c06-d003-e007-3ec8b83ab2e5
0x0F20 SharePoint Foundation Files ak8dj High ...rRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion,... 9842d09c-5c06-d003-e007-3ec8b83ab2e5
0x0F20 SharePoint Foundation Files ak8dj High ... String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.SPWeb.GetWebPartPageContent(Uri pageUrl, Int32 pageVersion, PageView requestedView, HttpContext context, Boolean forRender, Boolean includeHidden, Boolean mainFileRequest, Boolean fetchDependencyInformation, Boolean& ghostedPage, String& siteRoot, Guid& siteId, Int64& bytes, ... 9842d09c-5c06-d003-e007-3ec8b83ab2e5
0x0F20 SharePoint Foundation Files ak8dj High ...Guid& docId, UInt32& docVersion, String& timeLastModified, Byte& level, Object& buildDependencySetData, UInt32& dependencyCount, Object& buildDependencies, SPWebPartCollectionInitialState& initialState, Object& oMultipleMeetingDoclibRootFolders, String& redirectUrl, Boolean& ObjectIsList, Guid& listId) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.FetchWebPartPageInformationForInit(HttpContext context, SPWeb spweb, Boolean mainFileRequest, String path, Boolean impersonate, Boolean& isAppWeb, Boolean& fGhostedPage, Guid& docId, UInt32& docVersion, String& timeLastModified, SPFileLevel& spLevel, String& masterPageUrl, String& customMasterPageUrl, String& webUrl, String& siteUrl, Guid& siteId, Object& buildDependencySetData, SPWebPartCollectionInitialState& initialState, ... 9842d09c-5c06-d003-e007-3ec8b83ab2e5
0x0F20 SharePoint Foundation Files ak8dj High ...String& siteRoot, String& redirectUrl, Object& oMultipleMeetingDoclibRootFolders, Boolean& objectIsList, Guid& listId, Int64& bytes) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.GetFileForRequest(HttpContext context, SPWeb web, Boolean exclusion, String virtualPath) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.InitContextWeb(HttpContext context, SPWeb web) at Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext context) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.GetContextWeb(HttpContext context) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea) at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IEx... 9842d09c-5c06-d003-e007-3ec8b83ab2e5
0x0F20 SharePoint Foundation Files ak8dj High ...ecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error) at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb) at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompl... 9842d09c-5c06-d003-e007-3ec8b83ab2e5
0x0F20 SharePoint Foundation Files ak8dj High ...etion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) 9842d09c-5c06-d003-e007-3ec8b83ab2e5
0x0F20 SharePoint Foundation Files aiv4w Medium Spent 0 ms to bind 5230 byte file stream 9842d09c-5c06-d003-e007-3ec8b83ab2e5
0x0F20 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ 9842d09c-5c06-d003-e007-3ec8b83ab2e5
0x0F20 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=5.95222297806006 9842d09c-5c06-d003-e007-3ec8b83ab2e5
0x0F20 SharePoint Foundation General 8nca Medium Application error when access /default.aspx, Error=Could not load file or assembly 'KWizCom.SharePoint.Foundation, Version=13.3.0.0, Culture=neutral, PublicKeyToken=30fb4ddbec95ff8f' or one of its dependencies. The system cannot find the file specified. at KWizCom.SharePoint.ClipboardManager.CONTROLTEMPLATES.ClipboardManager.RegisterClipboard.Page_Load(Object sender, EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeS... 9842d09c-5c06-d003-e007-3ec8b83ab2e5
0x0F20 SharePoint Foundation General 8nca Medium ...tagesAfterAsyncPoint) 9842d09c-5c06-d003-e007-3ec8b83ab2e5
0x0F20 SharePoint Foundation Runtime tkau Unexpected System.IO.FileNotFoundException: Could not load file or assembly 'KWizCom.SharePoint.Foundation, Version=13.3.0.0, Culture=neutral, PublicKeyToken=30fb4ddbec95ff8f' or one of its dependencies. The system cannot find the file specified. at KWizCom.SharePoint.ClipboardManager.CONTROLTEMPLATES.ClipboardManager.RegisterClipboard.Page_Load(Object sender, EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPo... 9842d09c-5c06-d003-e007-3ec8b83ab2e5
0x0F20 SharePoint Foundation Runtime tkau Unexpected ...int) 9842d09c-5c06-d003-e007-3ec8b83ab2e5
0x0F20 SharePoint Foundation General ajlz0 High Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.IO.FileNotFoundException: Could not load file or assembly 'KWizCom.SharePoint.Foundation, Version=13.3.0.0, Culture=neutral, PublicKeyToken=30fb4ddbec95ff8f' or one of its dependencies. The system cannot find the file specified. File name: 'KWizCom.SharePoint.Foundation, Version=13.3.0.0, Culture=neutral, PublicKeyToken=30fb4ddbec95ff8f' at KWizCom.SharePoint.ClipboardManager.CONTROLTEMPLATES.ClipboardManager.RegisterClipboard.Page_Load(Object sender, EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.... 9842d09c-5c06-d003-e007-3ec8b83ab2e5
0x0F20 SharePoint Foundation General ajlz0 High ...LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.We... 9842d09c-5c06-d003-e007-3ec8b83ab2e5
0x0F20 SharePoint Foundation General ajlz0 High ...b.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) 9842d09c-5c06-d003-e007-3ec8b83ab2e5
0x0F20 SharePoint Foundation General aat87 Monitorable 9842d09c-5c06-d003-e007-3ec8b83ab2e5
0x0F20 SharePoint Foundation Micro Trace uls4 Medium Micro Trace Tags: 0 adyrv,0 nasq,0 agb9s,4 ak8dj,1 b4ly,8 8nca,0 tkau,0 ajlz0,0 aat87 9842d09c-5c06-d003-e007-3ec8b83ab2e5
0x0F20 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://tgvstg01:31546/default.aspx)). Execution Time=19.067157976782 9842d09c-5c06-d003-e007-3ec8b83ab2e5
0x1680 SharePoint Foundation General adyrv High Cannot find site lookup info for request Uri http://localhost:31546/_layouts/15/1033/styles/corev15.css?rev=OqAycmyMLoQIDkAlzHdMhQ==.
0x1060 SharePoint Foundation General adyrv High Cannot find site lookup info for request Uri http://localhost:31546/_layouts/15/1033/styles/Themable/corev15.css?rev=OqAycmyMLoQIDkAlzHdMhQ==.
0x1680 SharePoint Foundation Configuration 8059 Warning Alternate access mappings have not been configured. Users or services are accessing the site http://tgvstg01:31546 with the URL http://localhost:31546. This may cause incorrect links to be stored or returned to users. If this is expected, add the URL http://localhost:31546 as an AAM response URL. For more information, see: http://go.microsoft.com/fwlink/?LinkId=114854"/>
0x1060 SharePoint Foundation Configuration 8059 Warning Alternate access mappings have not been configured. Users or services are accessing the site http://tgvstg01:31546 with the URL http://localhost:31546. This may cause incorrect links to be stored or returned to users. If this is expected, add the URL http://localhost:31546 as an AAM response URL. For more information, see: http://go.microsoft.com/fwlink/?LinkId=114854"/>
0x1680 SharePoint Foundation Micro Trace uls4 Medium Micro Trace Tags: 0 adyrv
0x1060 SharePoint Foundation Micro Trace uls4 Medium Micro Trace Tags: 0 adyrv
0x1AC0 SharePoint Foundation General adyrv High Cannot find site lookup info for request Uri http://localhost:31546/ScriptResource.axd?d=UuopqMVjxlPyCKB-J3eW7oCZ8X3UkGAybJ_dvoik03YDEq7Zegjt4Rg9aDbicjrfcVKKD4V1RBuG2GzH3AdohtmnM3vg050NGuKmIlPPvv57bGV_m6dHaMqVZD5429U5RSpuui-0diKTzu3l7OHl8wpwz1Bgdsby6l2gbBCMRaMDBhl1a1Xp6nG7Nb3NlGfW0&t=7e632e9f.
0x1AC0 SharePoint Foundation Configuration 8059 Warning Alternate access mappings have not been configured. Users or services are accessing the site http://tgvstg01:31546 with the URL http://localhost:31546. This may cause incorrect links to be stored or returned to users. If this is expected, add the URL http://localhost:31546 as an AAM response URL. For more information, see: http://go.microsoft.com/fwlink/?LinkId=114854"/>
0x1AC0 SharePoint Foundation Micro Trace uls4 Medium Micro Trace Tags: 0 adyrv
0x1B9C SharePoint Foundation General adyrv High Cannot find site lookup info for request Uri http://localhost:31546/_layouts/15/1033/styles/error.css?rev=nc1850SZNy60qTAeQIRxsA==.
0x1B9C SharePoint Foundation Configuration 8059 Warning Alternate access mappings have not been configured. Users or services are accessing the site http://tgvstg01:31546 with the URL http://localhost:31546. This may cause incorrect links to be stored or returned to users. If this is expected, add the URL http://localhost:31546 as an AAM response URL. For more information, see: http://go.microsoft.com/fwlink/?LinkId=114854"/>
0x1B9C SharePoint Foundation Micro Trace uls4 Medium Micro Trace Tags: 0 adyrv
0x1B9C SharePoint Foundation Runtime afu6a High [Forced due to logging gap, cached @ 11/27/2014 16:01:47.65, Original Level: VerboseEx] No SPAggregateResourceTally associated with thread.
0x1B9C SharePoint Foundation Runtime afu6b High [Forced due to logging gap, Original Level: VerboseEx] No SPAggregateResourceTally associated with thread.
0x1B9C SharePoint Foundation General adyrv High Cannot find site lookup info for request Uri http://localhost:31546/_layouts/15/init.js?rev=rQHvYUfURJXLBpgKnm0dcA==.
0x1B9C SharePoint Foundation Configuration 8059 Warning Alternate access mappings have not been configured. Users or services are accessing the site http://tgvstg01:31546 with the URL http://localhost:31546. This may cause incorrect links to be stored or returned to users. If this is expected, add the URL http://localhost:31546 as an AAM response URL. For more information, see: http://go.microsoft.com/fwlink/?LinkId=114854"/>
0x1B9C SharePoint Foundation Micro Trace uls4 Medium Micro Trace Tags: 0 adyrv
0x0E8C SharePoint Foundation Runtime afu6a High [Forced due to logging gap, cached @ 11/27/2014 16:01:47.65, Original Level: VerboseEx] No SPAggregateResourceTally associated with thread.
0x0E8C SharePoint Foundation Runtime afu6b High [Forced due to logging gap, Original Level: VerboseEx] No SPAggregateResourceTally associated with thread.
0x0E8C SharePoint Foundation General adyrv High Cannot find site lookup info for request Uri http://localhost:31546/ScriptResource.axd?d=7IyzISHOgOSyHIlvXy8QdZcgEzGJDQqGKmJaoQjTOiaBz5VlSWcOLKEUSzu8OULMTnnhbaq_-M0WsBRbRbI4C0hGFySGSjYp5rz_grh3qRY5BTEa8vorG92WxotZwh5JXXg6gAscDxPMYJjtv2xudJ85xIui8hahYynsNIyBIm-8hwWUmX9p1xnMGTP_dupT0&t=7e632e9f.
0x0E8C SharePoint Foundation Configuration 8059 Warning Alternate access mappings have not been configured. Users or services are accessing the site http://tgvstg01:31546 with the URL http://localhost:31546. This may cause incorrect links to be stored or returned to users. If this is expected, add the URL http://localhost:31546 as an AAM response URL. For more information, see: http://go.microsoft.com/fwlink/?LinkId=114854"/>
0x0D68 SharePoint Foundation Runtime afu6a High [Forced due to logging gap, cached @ 11/27/2014 16:01:47.65, Original Level: VerboseEx] No SPAggregateResourceTally associated with thread.
0x0D68 SharePoint Foundation Runtime afu6b High [Forced due to logging gap, Original Level: VerboseEx] No SPAggregateResourceTally associated with thread.
0x0D68 SharePoint Foundation General adyrv High Cannot find site lookup info for request Uri http://localhost:31546/_layouts/15/blank.js?rev=ZaOXZEobVwykPO9g8hq/8A==.
0x0D68 SharePoint Foundation Configuration 8059 Warning Alternate access mappings have not been configured. Users or services are accessing the site http://tgvstg01:31546 with the URL http://localhost:31546. This may cause incorrect links to be stored or returned to users. If this is expected, add the URL http://localhost:31546 as an AAM response URL. For more information, see: http://go.microsoft.com/fwlink/?LinkId=114854"/>
0x0E8C SharePoint Foundation Micro Trace uls4 Medium Micro Trace Tags: 0 adyrv
0x1CF4 SharePoint Foundation Runtime afu6a High [Forced due to logging gap, cached @ 11/27/2014 16:01:47.65, Original Level: VerboseEx] No SPAggregateResourceTally associated with thread.
0x1CF4 SharePoint Foundation Runtime afu6b High [Forced due to logging gap, Origin
, i have spend two days over this without being able to know what is the problem ?

How to design a web based leave management application using jsf n Spring

I'm a beginner for spring and jsf technology. I have a requirement to design web based leave management module using jsf and spring. Im confused in the design phase itself and not clearly knowing how to classify the classes. I need to understand clearly on how to do class design, and wanted to use MVC design patterns. As i know jsf itself is MVC but, as i want to use spring, i need to have some kind of model files and bean files.
I'm clear about the following 3 classes.
Applicant
Approver
Leave
this will be like applicant will apply for leave and approvar when he logs he will see list of applied leaves and he will approve / reject the same by selecting one or more rows from datatable.
Please guide me on designing this or gimme some link where i can read about designing java classes for web based applications.
Thanks for your time and help.

Please guide me on designing this or gimme some link where i can read about designing java classes for web based applications.Sure:
http://static.springsource.org/spring/docs/3.0.x/spring-framework-reference/html/

Runtime error and unable to create new web application

Hi
when i create new web application i faced this error Runtime error and unable to create new web application.
in this farm we have
2 wfe servers
2 application servers.
adil

Adil,
There could be many reason like IIS issue, Space issue, Permission issue, SQL issue which is not possible us to guess rather
you need to jump in the SharePoint log(Program Files\Common files\Microsoft Shared\Web Server Extensions\14\LOGS) and find out the specific error log its throwing after which trouble shoot can be start.
You can refer few similar threads here -
Link
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Create a new web application, how shall I update the file server.xml

Hi,
I will create a new web application, i.e named newApp. Then I create a file structure as follows:
- <server-root>/newApp
- <server-root>/newApp/WEB-INF
- <server-root>/newApp/WEB-INF/classes
Then I must tell the server that I have created a new web application. Then I must update my file server.xml, How shall I do this and where in the file shall I type in the new information?
I use windows XP Pro, and Tomcat 4.1.27.
My server.xml file looks like below:



<Server port="8005" shutdown="SHUTDOWN" debug="0">


<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"
debug="0"/>
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"
debug="0"/>

<GlobalNamingResources>

<Environment name="simpleValue" type="java.lang.Integer" value="30"/>

<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved">
</Resource>
<ResourceParams name="UserDatabase">
<parameter>
<name>factory</name>
<value>org.apache.catalina.users.MemoryUserDatabaseFactory</value>
</parameter>
<parameter>
<name>pathname</name>
<value>conf/tomcat-users.xml</value>
</parameter>
</ResourceParams>
</GlobalNamingResources>


<Service name="Tomcat-Standalone">


<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8080" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="100" debug="0" connectionTimeout="20000"
useURIValidationHack="false" disableUploadTimeout="true" />




<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8009" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" connectionTimeout="0"
useURIValidationHack="false"
protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>












<Engine name="Standalone" defaultHost="localhost" debug="0">



<Logger className="org.apache.catalina.logger.FileLogger"
prefix="catalina_log." suffix=".txt"
timestamp="true"/>


<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
debug="0" resourceName="UserDatabase"/>







<Host name="localhost" debug="0" appBase="webapps"
unpackWARs="true" autoDeploy="true">





<Logger className="org.apache.catalina.logger.FileLogger"
directory="logs" prefix="localhost_log." suffix=".txt"
timestamp="true"/>

<DefaultContext reloadable="true"/>

<Context path="" docBase="ROOT" debug="0"/>

<Context path="/examples" docBase="examples" debug="0"
reloadable="true" crossContext="true">
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="localhost_examples_log." suffix=".txt"
timestamp="true"/>
<Ejb name="ejb/EmplRecord" type="Entity"
home="com.wombat.empl.EmployeeRecordHome"
remote="com.wombat.empl.EmployeeRecord"/>




<Environment name="maxExemptions" type="java.lang.Integer"
value="15"/>
<Parameter name="context.param.name" value="context.param.value"
override="false"/>
<Resource name="jdbc/EmployeeAppDb" auth="SERVLET"
type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/EmployeeAppDb">
<parameter><name>username</name><value>sa</value></parameter>
<parameter><name>password</name><value></value></parameter>
<parameter><name>driverClassName</name>
<value>org.hsql.jdbcDriver</value></parameter>
<parameter><name>url</name>
<value>jdbc:HypersonicSQL:database</value></parameter>
</ResourceParams>
<Resource name="mail/Session" auth="Container"
type="javax.mail.Session"/>
<ResourceParams name="mail/Session">
<parameter>
<name>mail.smtp.host</name>
<value>localhost</value>
</parameter>
</ResourceParams>
<ResourceLink name="linkToGlobalResource"
global="simpleValue"
type="java.lang.Integer"/>
</Context>
</Host>
</Engine>
</Service>
</Server>

To use servlets u have indeed to update your web.xml...Well I'm not sure this is relevant to your case anyway.
You have to add a <servlet> element to this file.
Something like this:
<servlet>
<servlet-name>blabla</servlet-name>
<servlet-class>blablapackage.Blablaclass</servlet-class>
<init-param>...</init-param>
</servlet>
Now this may not solve your problem. Make sure you refer to your servlets using their full qualified names.btw, just to be sure, what is your definition of "servlet"? (i mean: any java class or only javax.servlet.Servlet)

Hi, I developed a web application using HTML5-Offline Application Cache mechanism. Inspite of deleting the cache as mentioned in the above steps, Firefox still maintains a copy of the page in it's cache. Also, a serious bug is, even though we delete all

== Issue
==
I have a problem with my bookmarks, cookies, history or settings
== Description
==
Hi,
I developed a web application using HTML5-Offline Application Cache mechanism. Inspite of deleting the cache as mentioned in the above steps, Firefox still maintains a copy of the page in it's cache. Also, a serious bug is, even though we delete all temp files used by Firefox, and open the previously cached page, it displays it correctly, but upon refreshing/reloading it again shows the previous version of the page maintained in the cache.
== Troubleshooting information
==
HTML5: Application Caching
.style1 {
font-family: Consolas;
font-size: small;
text-align: left;
margin-left: 80px;
function onCacheChecking(e)
printOutput("CHECKINGContents of the manifest are being checked.", 0);
function onCacheCached(e) {
printOutput("CACHEDAll the resources mentioned in the manifest have been downloaded", 0);
function onCacheNoUpdate(e)
printOutput("NOUPDATEManifest file has not been changed. No updates took place.", 0);
function onCacheUpdateReady(e)
printOutput("UPDATEREADYChanges have been made to manifest file, and were downloaded.", 0);
function onCacheError(e) {
printOutput("ERRORAn error occured while trying to process manifest file.", 0);
function onCacheObselete(e)
printOutput("OBSOLETEEither the manifest file has been deleted or renamed at the source", 0);
function onCacheDownloading(e) {
printOutput("DOWNLOADINGDownloading resources into local cache.", 0);
function onCacheProgress(e) {
printOutput("PROGRESSDownload in process.", 0);
function printOutput(statusMessages, howToTell)
* Outputs information about an event with its description
* @param statusMessages The message string to be displayed that describes the event
* @param howToTell Specifies if the output is to be written onto document(0) or alert(1) or both(2)
try {
if (howToTell == 2) {
document.getElementById("stat").innerHTML += statusMessages;
window.alert(statusMessages);
else if (howToTell == 0) {
document.getElementById("stat").innerHTML += statusMessages;
else if (howToTell == 1) {
window.alert(statusMessages);
catch (IOExceptionOutput) {
window.alert(IOExceptionOutput);
function initiateCaching()
var ONLY_DOC = 0;
var ONLY_ALERT = 1;
var BOTH_DOC_ALERT = 2;
try
if (window.applicationCache)
var appcache = window.applicationCache;
printOutput("BROWSER COMPATIBILITYSUCCESS!! AppCache works on this browser.", 0);
appcache.addEventListener('checking', onCacheChecking, false);
appcache.addEventListener('cached', onCacheCached, false);
appcache.addEventListener('noupdate', onCacheNoUpdate, false);
appcache.addEventListener('downloading', onCacheDownloading, false);
appcache.addEventListener('progress', onCacheProgress, false);
appcache.addEventListener('updateready', onCacheUpdateReady, false);
appcache.addEventListener('error', onCacheError, false);
appcache.addEventListener('obsolete', onCacheObselete, false);
else
document.getElementById("stat").innerHTML = "Failure! I cant work.";
catch (UnknownError)
window.alert('Internet Explorer does not support Application Caching yet.\nPlease run me on Safari or Firefox browsers\n\n');
stat.innerHTML = "Failure! I cant work.";
== Firefox version
==
3.6.3
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 ( .NET CLR 3.5.30729; .NET4.0E)
== Plugins installed
==
*-Shockwave Flash 10.0 r45
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*Google Update
*4.0.50524.0
*Office Live Update v1.4
*NPWLPG
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
*Npdsplay dll
*DRM Store Netscape Plugin
*DRM Netscape Network Object
Thanks & Regards,
Kandarpa Chandrasekhar Omkar
Software Engineer
Wipro Technologies
Bangalore.
[email protected]
[email protected]

We have had this issue many, many times before including on the latest 3.6 rev. It appears that when the applicationCache has an update triggered by a new manifest file, the browser may still use only its local network cache to check for updates to the files in the manifest, instead of forcing an HTTP request and revalidating both the browser cache and the applicationCache versions of the cached file (seems there is more than one). I have to assume this is a browser bug, as one should not have to frig with server Cache-Control headers and such to get this to work as expected (and even then it still doesn't sometimes).
The only thing that seems to fix the problem is setting network.http.use-cache to false (default is true) in about:config . This helps my case because we only ever run offline (applicationCache driven) apps in the affected browser (our managed mobile apps platform), but it will otherwise slow down your browser experience considerably.

Error in Creating New Web Application SharePoint 2013

Everything was working fine but today when i try to create a new web application i am getting the following error.It's happening whenever i am trying to create a new web application.
The directory C:\inetpub\wwwroot\wss\VirtualDirectories\26060 is already being used by another IIS Web Site. Choose a different root directory for your new Web application.
But this port 26060 was not being used before and if i try to create new web application again then the error message occurs with the port number of the new web application.
Please help.

Hi HelloFragrance,
Are you using a host header when creating these web apps? If so have you tried creating without a host header? Also are you logged in with the Server with the Admin account? Check this out: (taken from Jeremy Taylor's
blog)
" 1. Ensure you have a proper dns name / entry in the hosts file of your server for the new url you are wanting to create.
2. Ensure you have typed in the ‘host header’ typed in when creating the new web application.
3. If this doesnt work, open IIS Manager – Start>run> inetmgr> and verify the home directory – it could be located on a different drive."
Also have you tried creating through Powershell and see if you run into the same issue or not?
http://technet.microsoft.com/en-us/library/ff607931(v=office.15).aspx
Hope this helps!
Thanks!
BlueSky2010
Please help and appreciate others by using forum features: "Propose As Answer", "Vote As Helpful" and
"Mark As Answer"

Buling a new Web Application using JSF and Ajax.

Similar Messages

Maybe you are looking for