Bulletin board source code

Has anyone got scource code for a bulletin board.
Servlets or JSP.
Much like the forum we are on now.

I have written a forum using servlets. Still have a few bugs to fix. I'm putting it off right now because I'm doing another project for a client. Perhaps we could collaborate and share the code when it's done. The alternative would be to go to:
www.coolservlets.com
and download jive.

Similar Messages

  • How to get source code for WinCE 6.0 USB Camera Driver for ARM4I Processor

    Hi,
    I am implementing USB camera driver for my mini2440 board which has an ARM4I processor. The sample code
    "Windows Embedded CE 6.0 USB camera Driver" downloaded from:
    http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2ef087c0-a4ae-42cc-abd0-c466787c11f2
    does not support ARM4I processors. When trying to generate in VS2005 Platform Builder my WinCE 6.0
    image for mini2440 with the Third party catalog items "MJPEG Decompression Filter" and "USB CameraDriver",
    the linker giver errors. Please advise where to find a working source code for USB (now revision 1.1
    ("full-speed") is supported in my WinCE 6.0 image) camera for my ARM4I processor. The code should 
    be in C# but C++ will be fine also.
    Thanks,
       Paul

    i get this on the hyperterminal when i run the cameradshowapp.exe
    Compulab Windows CE NAND X-Loader for CM-T35                                           
    Built Dec 20 2009 at 16:48:16                            
    Version 1.01.222               
    Commit Date 16/12/09                   
    Jumping to bootloader                    
    Microsoft Windows CE Bootloader Common Library Version 1.4 Built Dec 20 2009 16:                                                                               
    46:16    
    INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0x200b                                                    
    Texas Instruments Windows CE EBOOT for CM-T35, Built Dec 20 2009 at 16:48:10                                                                           
    Version 1.01.222               
    OMAP3430 Version 0x4b7ae02f (Unknown)                                    
    TPS659XX Version 0x10 (ES2.x)                            
    -OEMPinMuxSetup....                  
    System ready!            
    Preparing for download...                        
    INFO: Predownload               
    +FMD_Init        
    Checking bootloader blocks are marked as reserved (Num = 6)                                                          
    +FMD_Init        
    WARN: Boot config wasn't found, using defaults                                             
    +FMD_Init        
    OALFlashStoreOpen: 4096 blocks, 64 sectors/block                                               
    OALFlashStoreOpen: 2048 bytes/sector, 14 reserved blocks                                                       
    Calling LCD_TurnOn                 
    +FMD_Init        
    +FMD_Init        
    BLConfigureFlashPartitions: dwBootPartitionSectorCount = 0x5fff, partition actua                                                                               
    l size =0x4d3a!!!                
    Hit space to enter configuration menu 5...                                         
    Hit space to enter configuration menu 4...                                         
    Hit space to enter configuration menu 3...                                         
    Hit space to enter configuration menu 2...                                         
    Hit space to enter configuration menu 1...                                         
    INFO: Boot Device location = 0x8000020                                     
    Load NK image from flash memory                              
    +FMD_Init        
    ROMHDR (pTOC = 0x823b8c28) ---------------------                                               
      DLL First           : 0x4001c001                                 
      DLL Last            : 0x41c7c0d8                                 
      Physical First      : 0x84001000                                 
      Physical Last       : 0x863bbdec                                 
      Num Modules         :        294                                 
      RAM Start           : 0x863c0000                                 
      RAM Free            : 0x863d5000                                 
      RAM End             : 0x90800000                                 
      Num Copy Entries                        
      Copy Entries Offset : 0x85256e38                                 
      Prof Symbol Length  : 0x00000000                                 
      Prof Symbol Offset  : 0x00000000                                 
      Num Files           :        116                                 
      Kernel Flags        : 0x00000002                                 
      FileSys RAM Percent : 0x00000020                                 
      Driver Glob Start   : 0x00000000                                 
      Driver Glob Length  : 0x00000000                                 
      CPU                 :     0x01c2                                 
      MiscFlags           :     0x0002                                 
      Extensions          : 0x84002020                                 
      Tracking Mem Start  : 0x00000000                                 
      Tracking Mem Length : 0x00000000                                 
    NK Image Loaded            
    Launch Windows CE image by jumping to 0x80001000...                                                  
    Windows CE Kernel for ARM (Thumb Enabled) Built on Apr  5 2011 at 17:47:22                                                                         
    +OEMInit       
    ýSETDATAOUT access is OK....                           
    Forcing clean boot                 
    MainMemoryEndAddress = 0x90800000                                
    -OEMInit       
    +FMD_Init        
    Dumping registry defined VK                          
    Row 0:  0x18    0x9     0x25    0x0     0x0     0x0                                                  
    Row 1:  0x26    0xd     0x28    0x0     0x0     0x0                                                  
    Row 2:  0x27    0x24    0x23    0x0     0x0     0x0                                                  
    Row 3:  0x0     0x0     0x0     0x0     0x0     0x0                                                  
    Row 4:  0x0     0x0     0x0     0x0     0x0                                             
    Row 5:  0x0     0x0     0x0     0x0     0x0     0x0                                                  
    SMSC922x: Core Ethernet Init.                            
    Lan9220 identified. ID_REV = 0x92200000                                      
    SMSC922x: MAC address = 00:01:c0:0a:a0:db                                        
    Lan9220 identified. ID_REV = 0x92200000                                      
    SMSC922x: MAC address = 00:01:c0:09:88:80                                        
    SDIO8686: Loading Driver [version = 38.p44]                                          
    SDIO8686: Reset with TPS GPIO 2 --> done                                       
    !!!Kernel mode PSL 'PRdr' de-registered!!!                                         
    !!!Kernel mode PSL 'HRdr' de-registered!!!                                         
    !!!Kernel mode PSL 'FRdr' de-registered!!!                                         
    EHCI USB Host: HcdPdd_Init+                          
    [OTG] OMAPMHSUSBOTG::Init()+                           
    OMAPMHSUSBOTG::PostInit(): Start.                                
    DSPLINK Module (1.61.04) created on Date: Jun 24 2009 Time: 16:30:52                                                                   
    Display parameters:                  
            Height = 0x280                     
            Width = 0x1e0
            HSW = 0x20
            HFP = 0x8
            HBP = 0x17
            VSW = 0x1
            VFP = 0x4
            VBP = 0x3
            DVI is not enabled
            PixelClkDiv = 0x7
            LogClkDiv = 0x1
            ClkSelDSS = 0x5
    TD035:: LCDTurnOn
    TD035STEE1: Turned display on.
    TD035:: Finished LCD VGA init
    AUTOLAUNCH: Checking HKEY_LOCAL_MACHINE\Startup key for programs to run.
    Can't open HKEY_LOCAL_MACHINE\Startup key.
    [WiFi]: Firmware Version: 9.70.3.23
    CCaptureFramework: Failed setting up the camera data.
    CameraDShowApp: Initializing the camera driver list failed.CameraDShowApp: Retri
    eving the driver list failed.CameraDShowApp: Selecting the camera device failed.
    CameraDShowApp: Selecting the camera device failed.CameraDShowApp: Selecting the
     camera device failed.CameraDShowApp: Selecting the camera device failed.CCaptur
    eFramework: Retrieving the still stream config failed.
    CameraDShowApp: Initializing the capture graph failed.

  • Bulletin Board feature

    I enjoyed the Bulletin Board on my Satellite L500 and used all the features; it's great, you can drag gadgets and personalize, I used the To Do list daily. I scheduled it to open on logon and it did. I removed the scheduled task when I found that it slowed the open. When I deleted the task, the Bulletin Board no longer opens. When I click on it to open it, it pins onto the task bar and there is a thumbnail on mouse over, but that's it. I can see my personalized BB in the preview, but it will not open. Here is what I've tried: All the troubleshooting features on Windows 7, including AutoPeek. I tried restoring to a point to before I scheduled the task 2 days prior. When I did that, the error said that my C drive is corrupted! I deleted the Bulletin Board application and installed it again from the Toshiba Application Installer. The install was successful, but the program still won't open and the thumbnail still shows my personalized BB, which is strange since I deleted that one. Any thoughts? +

    I have exactly the same problem: Iwas enjoying of my bulleting board and in a moment I lost the acces to the program and the message syas: code error:23. I made all the proceedments, as you and either function to me.
    But the extrange thing is tha I created a different account, only for testing, and in this one the bulletin board ins funtioning very well..... what's happenning????

  • Satellite L650-1PE - Error messages in Toshiba bulletin board

    I got error messages when i try to use Toshiba bulletin board, so firstly I got error 3 and then i press ok and i got error 23 which i don't know why? By the way, my laptop Satellite L650-1PE.
    Also I uninstalled it and reinstall the latest version again but I got the same error messages. Please anyone can help me about it.
    Thanks in advance.

    Hi
    Error code 23 is not specific to a Toshiba Bulleting Board software.
    This error is generated by Windows OS and the reason for this could be:
    Windows Registry Damage or Corruption
    Device Driver Conflicts
    Hardware Malfunction
    Virus or Spyware Infection
    Software File Damage or Corruption
    So as you see, its really difficult to say what cause this
    You can uninstall this software, could clean the registry using CCleaner and then you could try to reinstall this software once again if the new installation does not help, then I would recommend checking new OS installation but I think its really annoying to reinstall the Toshiba image only to get this software working again but its your decision

  • Source code from https sites

    Hi, I am trying to get the source code from within my secure bank site.  I can get invoke nodes and property nodes to login automatically to my bank site but thats where I fail. I can not then get the source code of my watch screens. Is there a way I can use a ihtmldocument2 property node to gather the source code of frames within this secure site?
    I've attached a piece of code I've been playing with that sucessfully logs into my account, but thats where it ends. I can go to the page source in my browser and see what I want but cant get labview to gather it.   None of the forum topics cover this to my knowledge. Any help would be great.
    Regards
    Attachments:
    autologin_and_pagescrape.vi ‏49 KB

    Sniepsy,
    I think the following two links will be very useful for you:
    http://forums.ni.com/ni/board/message?board.id=170&message.id=145896&requireLogin=False
    http://forums.ni.com/ni/board/message?board.id=170&message.id=159554&requireLogin=False
    Hope that helps!
    Kalin T
    Applications Engineer
    National Instruments
    Kalin T.
    National Instruments

  • PhpBB2 source code does not show in design view /CS3

    I would like to customize a php bulletin board.
    The default bulletin board page does not show in design view.
    Is there a way to do it , such that php code can be written
    by DreamWeaver via the design view ?

    > The files I am trying to edit, or that is think I should
    be trying to edit ,
    > are
    > index.php , and in the includes file template.php
    If I am sorting this out correctly, which i am _not_ sure of
    at the moment:
    those aren't .tpl files.
    they are .php files, and are part of the forum. They aren't
    displaying in
    design view because they are all php.
    You need to find and edit the template files.
    In previous link given:
    http://www.phpbb.com/community/viewtopic.php?t=10764
    <q>
    So where do I find these great 'templates'?
    Look in /templates/subSilver (thoroughout the FAQ I will be
    using subSilver,
    the default template. If you are using a different template
    then change the
    folder you look in accordingly). You will see a collection of
    files there.
    The templates are the ones with the file extension '.tpl' The
    majority of
    files in that folder are .tpl files. </q>
    strongly suggest you make a backup copy of anything you try
    to touch.
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • How can i call the certificate selection dialog box from source code?

    How can i call the certificate selection dialog box from source code?
    NB: Of course if i have more than one certificate in the Microsoft Keystore 'My'.
    Thank You in advance

    I found an example of the "TestStand UI Expression Control.ctl" and it works just the way I need it. (check the link)
    Proper use of "TestStand UI ExpressionEdit Control" in LabVIEW http://forums.ni.com/ni/board/message?board.id=330&requireLogin=False&thread.id=10609 
    The "Expression Browser Dialog Box Button" F(x) stays disable while editing the VI, however it become available when the VI is called from TestStand.
    Thank you,
    Hecuba
    Mfg. Test Engineer
    Certified LabVIEW Associate Developer

  • GUI Bulletin Board Question

    Hello,
    I want to produce a simple GUI application that mimics a bulletin board. Where there would be a GUI that people could insert a message, and I could allow others to view the past messages and possibly allow some filtering as to what they see.
    I want to go from the GUI window to a text file to hold the past messages. After the text file I will probably move up to a DB, but for now, I think it is a good starter application.
    I am having trouble with the IO class, because of the so many ways to read and write data, and was hoping someone may give me some guidance as to the best way to handle the IO, (which classes) or point me to a tutorial where they are reading a line at a time, and possibly putting them into a collection and then showing it in a GUI.
    I know that is kind of a large question, but any assistance to get me started would be helpful, and then I can refine my questions as I begin building my project.
    Thanks for your time,
    Scott

    Check out:
    http://www.javacoffeebreak.com/java103/java103.html
    and
    http://java.sun.com/docs/books/tutorial/essential/io/index.html
    I used the above links to come up with the above code to write to a file:
    try {
    FileOutputStream out = new FileOutputStream("SearchTableFile.Dat"); // Output file name
    PrintStream p = new PrintStream(out); //Create a stream to write to the file.
    for (int i=0; i<SearchTableFileData.length; i++) {
    p.print(SearchTableFileData); //write data stored in SearchTableFileData Array
    p.print("\n"); // write end of line character.
    // try and catch are error handling
    } catch(IOException ioe) {
    System.out.println("Error: " + ioe);
    To read the file back into the Array I have:
    try {
    DataInputStream in2 = new DataInputStream(
    new FileInputStream("SearchTableFile.Dat")); // Input File Name and Stream
    SearchTableFileData = new String[SearchTableFileLines];
    line = in2.readLine(); //reads first line
    SearchTableFileLines = 0;
    while (line != null) {
    SearchTableFileData[SearchTableFileLines] = line;
    SearchTableFileLines += 1;
    line = in2.readLine(); //reads next line
    in2.close();
    } catch (EOFException e) {
    } catch(IOException ioe) {
    System.out.println("Error: " + ioe);
    Hope this helps. The file reading routine has some variable that are declared elsewhere in the code and I didn't think it was necessary to explain all of them.

  • I am running 10.6.8 and using iweb for my web site. After several SEO analysis they all indicate I need H1-6 header tags. After looking at the source code I see there are none in iweb. Is it necessary to add? If so, how do I add H Tags to iweb.

    I am running 10.6.8 and using iweb for my web site. After several SEO analysis they all indicate I need H1-6 header tags. After looking at the source code I see there are none in iweb. Are they necessary to add?  Why would one add these tags and how do I add H Tags to iweb? And are there examples to look at? I am slowly learning about simple web design and assumed that iweb was stand alone without having to write code. Is this one of the reasons iweb is no longer supported? Thanks for looking at this!

    A simple text page like this:
    Heading
        sub heading
              text paragraph ....
    Is traditionally represented by html tags like:
    <h1>Heading</h1>
         <h2>sub heading</h2>
              <p>text paragraph ... </p>
    I would guess that the use of h1-h6 tags helps search engines to understand the structure of a page as the tags imply a certain structure.
    This can be compared to more generic tags like <div> that could represent any kind of content - and may be what iWeb uses (you'll have to check yourself).
    I would generally recommend that you use some kind of up to date blog/site building tool, perhaps Wordpress or Squarespace (I haven't used either one myself) that support current web technologies - this should reduce your SEO issues and make it easier to properly support mobile/tablet users.

  • Source code not generated in mapping

    Hi,
      I tried mapping an Idoc to an XSD in my mnessage mapping.When I try to check my message mapping I get an error msg : "<Mappingname> has no Source Code"...My scenario is only some fields of Idoc map to the XSD and the rest are constants..I am in XI3.
    Any help is appreciated...
    -Teresa

    Hi Teresa,
    Have you tried deleting the map and re-doing it ? Or is this unfeasible ?
    Cheers
    Colin

  • Ask again:  Where can I find source code for CPRM algorithm?

    Hi, everyone.
    Where can I find reference implementation or some sample codes for CPRM(content protection for recordable media) algorithm? Can anyone help?
    Information about CPRM can be find here,
    http://www.4centity.com/
    JAVA version is preferred and C/C++ implementation is also OK.
    Thanks in advance,
    Geo

    Thanks, edsonw buddy!
    I only found C2 cipher source code and some other documents dealing with CPRM algorithm. And what I want is total CPRM implementation reference source code (C2 is only a basic module of CPRM algorithm).
    So can you provide me some useful information dealing with how to get total CPRM implementation reference source code? Both JAVA and C/C++ will be OK.
    Have a wonderful weekend,
    George

  • Functional Module:Need  some sample source code.

    Hi All,
    I have created  a customized table   u2018ZStock_Order_Dealeru2019 with the following fields:
    Stock_Order_Dealer
    Dealer Number
    S2D order Number     
    Line item Number     
    Material Number     
    Ordered Quantity     
    Batch Number     
    Received Quantity     
    S2D from D2G     
    Receiving Date
    I need to  create a remote enabled function module in CRM system to fetch the u2018Batch Numberu2019 and u2018Received Quantityu2019 fields when the Material Number is fed to it.Please note that the input and output should be tables.
    Could some one please give some sample source code for this.

    I used table types and select queries to resolve this problem.

  • Cannot find source code for Employee Benefit application

    Hello,
    I am trying to find the Employee Benefit Sample Application which used to be provided by Oracle at http://otn.oracle.com/sample_code/products/ias/content.html. Unfortunately I couldn’t find the source code anywhere, neither by searching through oracle sites, nor through the internet.
    Could someone please help me get it, since I just started working on applications based on this model and it is really important for me to have a complete example that works.
    Thanks in advance,
    Stefanos

    Hello,
    This sample application used to work on older versions which is no longer supported. This is the reason, it has been removed.
    Thanks.

  • I need Expert Decomposition of classes in Source Code for my reaserch purpose. Any body can help me in this regard?

    <blockquote>Locked by Moderator as a duplicate/re-post.
    Please continue the discussion in this thread: [tiki-view_forum_thread.php?comments_parentId=698286&forumId=1]
    Thanks - c</blockquote>
    == Issue
    ==
    I have another kind of problem with Firefox
    == Description
    ==
    I need Expert Decomposition of classes in Source Code of Firefox for my research purpose. Any body can help me in this regard?
    == This happened
    ==
    Not sure how often
    == Firefox version
    ==
    3.0.19
    == Operating system
    ==
    Windows XP
    == User Agent
    ==
    Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.19) Gecko/2010031422 Firefox/3.0.19
    == Plugins installed
    ==
    *-Default Plug-in
    *RealPlayer(tm) LiveConnect-Enabled Plug-In
    *6.0.12.1662
    *Office Plugin for Netscape Navigator
    *Google Update
    *Shockwave Flash 10.1 r53
    *Yahoo Application State Plugin version 1.0.0.7
    *Next Generation Java Plug-in 1.6.0_18 for Mozilla browsers
    *Adobe PDF Plug-In For Firefox and Netscape
    *DRM Netscape Network Object
    *Npdsplay dll
    *DRM Store Netscape Plugin

    Please let me tell you that I Expert Decomposition may be of any Version of Firefox or Thunder Bird.

  • Source code has syntax error in SAP PI7.1 Mapping Test

    HI All,
    IN SAP P7.1  created simple two data types, message types and Message Mapping with only 2 fields. While testing the mapping in Message Mapping it is giving the error as
    Source text of object Message Mapping: MM_Source_to_Target | http://abc.com has syntax errors:
    Source code has syntax error:
    I am able to activate the Datatypes and Message Types but not able to activate the Messge mapping.
    Please if any body faced the same problem please give the solution.
    One more thing is I am able to test the Message Mapping available in BASIS 7.1 Software Component objects. It is executing successfully...
    but otherthan this SWC it not working success fully.....
    Regards
    Sridhar Goli

    Hi David,
    please check the default trace. It may contain the entry:
    Error in compiling : java.io.IOException: Not enough space
    If that's the case, maybe there's too little space for the swap file/device.
    You should ensure that at least 2X (preferably 3X) of Heap (-Xmx) is configured as real swap
    Hope that helps.
    Regards,
    Gábor Klauzer

Maybe you are looking for