How to get source code for WinCE 6.0 USB Camera Driver for ARM4I Processor

Hi,
I am implementing USB camera driver for my mini2440 board which has an ARM4I processor. The sample code
"Windows Embedded CE 6.0 USB camera Driver" downloaded from:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2ef087c0-a4ae-42cc-abd0-c466787c11f2
does not support ARM4I processors. When trying to generate in VS2005 Platform Builder my WinCE 6.0
image for mini2440 with the Third party catalog items "MJPEG Decompression Filter" and "USB CameraDriver",
the linker giver errors. Please advise where to find a working source code for USB (now revision 1.1
("full-speed") is supported in my WinCE 6.0 image) camera for my ARM4I processor. The code should
be in C# but C++ will be fine also.
Thanks,
Paul

i get this on the hyperterminal when i run the cameradshowapp.exe
Compulab Windows CE NAND X-Loader for CM-T35
Built Dec 20 2009 at 16:48:16
Version 1.01.222
Commit Date 16/12/09
Jumping to bootloader
Microsoft Windows CE Bootloader Common Library Version 1.4 Built Dec 20 2009 16:
46:16
INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0x200b
Texas Instruments Windows CE EBOOT for CM-T35, Built Dec 20 2009 at 16:48:10
Version 1.01.222
OMAP3430 Version 0x4b7ae02f (Unknown)
TPS659XX Version 0x10 (ES2.x)
-OEMPinMuxSetup....
System ready!
Preparing for download...
INFO: Predownload
+FMD_Init
Checking bootloader blocks are marked as reserved (Num = 6)
+FMD_Init
WARN: Boot config wasn't found, using defaults
+FMD_Init
OALFlashStoreOpen: 4096 blocks, 64 sectors/block
OALFlashStoreOpen: 2048 bytes/sector, 14 reserved blocks
Calling LCD_TurnOn
+FMD_Init
+FMD_Init
BLConfigureFlashPartitions: dwBootPartitionSectorCount = 0x5fff, partition actua
l size =0x4d3a!!!
Hit space to enter configuration menu 5...
Hit space to enter configuration menu 4...
Hit space to enter configuration menu 3...
Hit space to enter configuration menu 2...
Hit space to enter configuration menu 1...
INFO: Boot Device location = 0x8000020
Load NK image from flash memory
+FMD_Init
ROMHDR (pTOC = 0x823b8c28) ---------------------
DLL First           : 0x4001c001
DLL Last            : 0x41c7c0d8
Physical First      : 0x84001000
Physical Last       : 0x863bbdec
Num Modules         :        294
RAM Start           : 0x863c0000
RAM Free            : 0x863d5000
RAM End             : 0x90800000
Num Copy Entries
Copy Entries Offset : 0x85256e38
Prof Symbol Length : 0x00000000
Prof Symbol Offset : 0x00000000
Num Files           :        116
Kernel Flags        : 0x00000002
FileSys RAM Percent : 0x00000020
Driver Glob Start   : 0x00000000
Driver Glob Length : 0x00000000
CPU                 :     0x01c2
MiscFlags           :     0x0002
Extensions          : 0x84002020
Tracking Mem Start : 0x00000000
Tracking Mem Length : 0x00000000
NK Image Loaded
Launch Windows CE image by jumping to 0x80001000...
Windows CE Kernel for ARM (Thumb Enabled) Built on Apr 5 2011 at 17:47:22
+OEMInit
ýSETDATAOUT access is OK....
Forcing clean boot
MainMemoryEndAddress = 0x90800000
-OEMInit
+FMD_Init
Dumping registry defined VK
Row 0: 0x18    0x9     0x25    0x0     0x0     0x0
Row 1: 0x26    0xd     0x28    0x0     0x0     0x0
Row 2: 0x27    0x24    0x23    0x0     0x0     0x0
Row 3: 0x0     0x0     0x0     0x0     0x0     0x0
Row 4: 0x0     0x0     0x0     0x0     0x0
Row 5: 0x0     0x0     0x0     0x0     0x0     0x0
SMSC922x: Core Ethernet Init.
Lan9220 identified. ID_REV = 0x92200000
SMSC922x: MAC address = 00:01:c0:0a:a0:db
Lan9220 identified. ID_REV = 0x92200000
SMSC922x: MAC address = 00:01:c0:09:88:80
SDIO8686: Loading Driver [version = 38.p44]
SDIO8686: Reset with TPS GPIO 2 --> done
!!!Kernel mode PSL 'PRdr' de-registered!!!
!!!Kernel mode PSL 'HRdr' de-registered!!!
!!!Kernel mode PSL 'FRdr' de-registered!!!
EHCI USB Host: HcdPdd_Init+
[OTG] OMAPMHSUSBOTG::Init()+
OMAPMHSUSBOTG::PostInit(): Start.
DSPLINK Module (1.61.04) created on Date: Jun 24 2009 Time: 16:30:52
Display parameters:
        Height = 0x280
        Width = 0x1e0
        HSW = 0x20
        HFP = 0x8
        HBP = 0x17
        VSW = 0x1
        VFP = 0x4
        VBP = 0x3
        DVI is not enabled
        PixelClkDiv = 0x7
        LogClkDiv = 0x1
        ClkSelDSS = 0x5
TD035:: LCDTurnOn
TD035STEE1: Turned display on.
TD035:: Finished LCD VGA init
AUTOLAUNCH: Checking HKEY_LOCAL_MACHINE\Startup key for programs to run.
Can't open HKEY_LOCAL_MACHINE\Startup key.
[WiFi]: Firmware Version: 9.70.3.23
CCaptureFramework: Failed setting up the camera data.
CameraDShowApp: Initializing the camera driver list failed.CameraDShowApp: Retri
eving the driver list failed.CameraDShowApp: Selecting the camera device failed.
CameraDShowApp: Selecting the camera device failed.CameraDShowApp: Selecting the
camera device failed.CameraDShowApp: Selecting the camera device failed.CCaptur
eFramework: Retrieving the still stream config failed.
CameraDShowApp: Initializing the capture graph failed.

Similar Messages

How to Get Source Code of Standard ESS Component.

Hi,
I need to implement SAP Note 904107, in ESS ( Personal Info.) package. However no tracks are maintained in NWDI for ESS.
Please suggest me from where I can get Source Code for Standard SAP Web Dynpro component VcPerFamilyBEReview .
I read in some blogs and its suggested to create Track in NWDI using ESS package which is deployed on server. Please provide detail procedure, doc. and links for this.
If any other approach is there to get sorce code please suggest.

Hi,
VcPerFamilyBEReview component is found in the DC sap.com/essbefam
check these links to create track in NWDI
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0b2b146-5776-2910-4a8f-9b3190eab060]
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7014086d-3fd9-2910-80bd-be3417810c6f]
[https://www.sdn.sap.com/irj/sdn/wiki?path=/display/java/netweaver%2bdevelopment%2binfrastructure%2b(NWDI)]
Regards,
vv

Looking for LabView 6i GPIB-USB-A driver for Agilent E7401A

I am looking for LabView 6i GPIB-USA-A driver for Agilent E7401A EMC ANALYZER.

Hi,
There is a driver for this device available for downloading from the National Instruments Instrument Driver Network. Here is a link to the download page:
Multi-Environment Certified IVI Instrument Driver
Unfortunately, however, this driver is only available for 7.0 and 7.1. Unless someone else on this message board has created one for 6i, you will need to create your own.
The other option is to upgrade to LabVIEW 7.1, which I highly recommend. There are many improvements over LabVIEW 6, including Express VIs, Event Structures, and many others. You can see the new funtionality of LabVIEW 7.1 with a free online demo version at this link
Try LabVIEW 7.1 FREE Online
If you are interested in upgrading, you can call your National Instruments Technical Sales Representative at (888) 280-7645. Have a great day, and good luck with your driver search.
-John M

How to get source code for commands like diff or cat

Hi all
I'm learning c programming and i'd like to read some code for the basic commands on the linux system
I remember apt has one such option that allows getting pakcage source code
is there a similar one for pacman ?
or do i have to search those source code myself ?
and also in BSD system all the codes are availeble in a code repository
thx

diff and cat. Or was that too literal?
Last edited by Ghost1227 (2009-04-18 23:57:55)

How to get source code and build files for Eudora 7, and price?

Looking for source code and build/make files for Eudora 7 to port to Win7 and Ubuntu 14. Where is a source for this and what is the cost?

You best ask qualcomm. It is their intellectual property.
Eudora OSE was based on Thunderbird and the source code for the Penelope add-on is open source (that is what made Thunderbird over to OSE)

How to get source code in the video examples

I'm wondering how to get the source code, which used in the
video training. Thank you very much.

I don't believe that the source code is available.... however
you can do what I am going to do. On my 2nd round of going through
this stuff I am going to try to re-create that system in the
videos. So far it seems each step and every line of code is
shown... though there may be some things I have to get creative
with. :)
Someone else posted a link to get a csv of the employees
info, which can be used to create an xml file for the tutorials.

How to get Source code of a Schedular Java concurrent program in Payments

Hi Experts,
I am very new to Java Concurrent program.
I need java source code of a schedule java concurrent program.Following are the details of Executable.
Executable :Format Payment Instructions
Short Name :IBY_FD_PAYMENT_FORMAT
Application : Payments
Execution Method :Java Concurrent Program
Execution File Name:FDExtractAndFormatting
Execution File Path : oracle.apps.iby.scheduler
I searched in execution file path,but i am unable to find required java source.
Please someone help regarding this issue..
It's Urgent Issue.
Regards
Amar

Hi Srini,
Thanks for reply...
In the attached template of concurrent program "Format Payment Instructions", i need to add voucher number in the template.
How can i do this?how to decompile the executable?
It is a check printing.
Please give me suggestions..
Regards
Amar

How to get Source Code out of SCA File

I have a SCA file comprising SAP Ecommerce 5 solution. What I want to achieve is to get all the source code out of it including the original directory structure. Unzipping it doesn't give me the required results and requires a lot of manual work creating directories and more unzipping.
I tried importing it into a Local SC in NWDS but it complains that " Import (into source SC) not possible: SCA doesn't contain DC sources".
I don't have access to NWDI at this point.

Hi,
For getting the source code of the Business Package Content, follow the steps below:
1. Make sure Source Archive is available for the Business Package.
2. Create a NWDI Track, and include all dependencies (check SAP Note : 1080927 - Creating CMS Tracks for common Application Types )
3. Once you have track in place, you can import the Track into NWDS
4. In Development Configurations perspective of the NWDS you can see the track.
5. Now create Project from Inactive Workspace to start modifying the code.
Check the link for general links
http://wiki.sdn.sap.com/wiki/display/JDI/NWDIRelatedNotesandLinks
Hope this helps.
Cheers-
Pramod

How to get source code of ADF demo page.

I have used oracle ADF demo site for demo work related to graphs.
I want to download the source code of this demo. I mean jspx file, backing bean and style classes.
Is there any way I can download this source code?I believe there is no sense to use it without downloading it's code.
I want to download "Area graph Animation" from below link:
http://jdevadf.oracle.com/adf-richclient-demo/faces/feature/graph/animation.jspx?_afrRedirect=2611981845492287
Please help!
Thanks,
Jaykishan

This does NOT have .JWS file as
The demo WAR is a JDeveloper Project packaged into a WAR file.
So creating a dummy application or open an existing application.
Select 'File' ----> 'New' --> 'Projects' and select Project from WAR.
Thanks,
Navaneeth

How to get source code from portal app

Hi,
I have a successful Web dynpro portal application running, which I would like to modify. We lost the source code. Is there any way that I can get the source code from the portal?.
Thanks and I appreciate your help.
/Sunita.

Hi,
You can extract class files from app.jar and decompile it(.ear->.wda) but it is only generated classes without metadata. Metadata is stored in .wda file but format is not compatible with studio. That all options you have.
Go through the following links, it will be helpfull to you
Some of the solutions provided in it
[Re: Retrieve the source code from .EAR;
[Restore source code from ear file;
Regards
Raghu

How to get 2 gb on desktop, can i use g drive for this?

I'm attempting to install Yosemite but its stating I need 2 gb for this can I use m external G drive for this or do I need to get 2b installed?
Model Name: iMac
Model Identifier: iMac8,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 1 GB
Memory: 1 GB

The 2 GB requirement is memory, not storage space. 1 GB of memory will not run Yosemite let alone apps and Yosemite. Your model of iMac can use 6 GB of RAM. If you expect to use Yosemite and any apps with any efficiency upgrade your memory to 6 GB with a 2 GB and a 4 GB module. The most reliable and dependable suppliers of memory for Macs are Crucial.com and otherworldcomputing.com. I've found that Cruicial.com is usually a little less expensive.
Here's what Crucial has for your Mac:

How to display source code of a webpage in Safari 7.0?

Hello. I'm unable to find how we used to once enable developing tools in Safari Preferences or simply CMD + ALT + A to display the source code of a webpage. Now I've no clue how to display source code of a webpage in Safari 7.0 on Mac OS X Mavericks. Help.

Hi gss2,
Make sure you are not under the Apple icon but under Safari>Preferences>Advanced. All the way at the bottom check the box that says: "Show Develop menu in menu bar."
Now go back to the page you want to get the source code for, right click on it and choose Inspect Element. Hope this helps.
Cheers,
LURDS LLC

Hi, I got my Mac in 2009 with photoshop elements on it - it's recently been wiped, however before the process we put Photoshpp onto a hard drive, we then copied it back over and it no longer works, I'm getting error code 150:30 and I'm being asked for a p

Hi, I got my Mac in 2009 with photoshop elements on it - it's recently been wiped, however before the process we put Photoshop onto a hard drive, we then copied it back over and it no longer works, I'm getting error code 150:30 and I'm being asked for a password... any ideas how to get it working again?

You can never, never migrate an installed copy of PSE. It's just too complex and you can't get to all the bits and bobs.
First you will have to download and run this:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
which will not seem to do anything, but is necessary to break the links within PSE so that you can pitch the bits manually. Then you will have to go around, not only to applications, but also to your username>library>preferences and most importantly to the library at the top level of your hard drive>application support>adobe, and remove everything you can find. Spotlight will not help with this kind of search, so don't try that.
Then you can install PSE from scratch.

How to write source code in smart forms?

hi friends,
can anyone can help me in writing sorcecode in smartforms r
any materail link.
if it is helpful points can b rewarded.Thanks in advance.

Hi,
Check this link for
how to write source code in smart forms?
http://****************/Tutorials/Smartforms/GettingStarted/SimpleText.htm
You can write Source Code in smartforms By Choosing Program Lines.
Check this link with Screen Shots
http://****************/Tutorials/Smartforms/PO/page1.htm
Reward All Helpfull Answers
Regards
Fareedas
Edited by: Fareeda Tabassum S on May 21, 2008 3:09 PM

How to apply source code

Does Contribute allow Admins to paste in (apply) source code
to various Web pages? I've got a source code from Google Analytics
I want to use for tracking and can't find how to apply it using
Contribute.

Use Insert--> HTML Snippet and insert the Google Analytics
code at the end of the page. I tried in one of my site, it worked
fine.
When viewed the page source the GA code was insert here
<GA code comes here>
</p>
</td>
</tr>
</table>
</td>
</tr>
</table>
</td>
</tr>
</table>
</body>
</html>
Thanks

How to get source code for WinCE 6.0 USB Camera Driver for ARM4I Processor

Similar Messages

Maybe you are looking for