By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and is it possible to install it on both Windows and Apple(if it comes with two licenses)? Thank you.

By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and if it does, is it possible to install on both Windows and Apple's OX? Thanks.

A Cloud subscription provides for installing working installations on two machines. You can have mixed operating systems (both Windows and Apple's OX).

Similar Messages

Anyone with more than one iPhone 6/6+ in same order getting there phones shipped if all your phones didn't have 9-19 when you ordered?

Our Verizon account has 10 lines and I figure we're paying over $7,000 a year, when I think of how much money total we have payed to Verizon only to be jerked around and around and lied too over and over again really does make me sick. 6 of these contracts have ended and 3 will be up in next couple months and 1 has a year left so the cancelation fees would not be that bad. And with the other big carrier I've heard it might be cheaper on monthly service. All I wanted from Verizon was for them to do whats right.
I Ordered
iPhone 6 16gb gray
iPhone 6+ 16gb gray
iPhone 6+ 64gb gray
iPhone 6+ 64gb silver
all on the same order. I finished at 3:19 am est and got a date of 10/14 even though all the phones except the 6+ 16 gb gray had 9/19. Got confirmation email at 4:56 will ship by 10/14 I got worried that all the phones would not ship till 10/14 and contacted verizon thru facebook messenger. They told me my phones would ship in the order received and not be held up by a phone that wasn't available in my order. And based on the time of my order she said 9/19 for the 6 and 6+ silver, 10/7 for the 6+ 64 gray , 10/14 for 6+ 16 gray. On Monday morning my status changed to 9/19:):) in the afternoon in changed to unknown. I called 611 and rep went thru all my phones with a time sheet she had and said i should get all but the 6+ 16 gray on 9/19, she said that one you had to order by 3:00 to get on 9/19. On Wednesday my status changed to 10/14 , called 611 again and this lady told me all my phones had 10/14 listed after them. She told me she didn't know what to tell me that Apple ships the phones and its out of Verizon's hands because they don't have the phones. then she told me to call Apple (and gave me the phone # ) and see if they ship preorders with more than 1 in a order when their available or wait till all are. I called them ( they laughed that Verizon had me call them) and they don't hold up orders . Called customer service back and guy said at least 10 times ....I ASSURE YOU VERIZON WILL NOT HOLD YOUR PHONES!!! i said of course they're not actually putting them in a box and waiting for all, they're sending them to other people who ordered after me. I asked him if my order could be separated/ rebuilt and do a (jump the line request) so i could get my phones when i should. He said there is no such thing at verizon....he has worked there many years and if there was he would know. Someone posted # to Internet orders so i called them Thursday morning, spoke to a very nice guy he said my phones that i should get i would and i should get an e-mail later that day and if i didnt get anything by 8:00 pm to call back. Before we hung up i asked if I didn't get anything did he know if they could cancel/separate/rebuild and do jump the line, he said they can do that and put me on hold while he spoke with a supervisor, he came back and said if nothing happened that day they would do that with my order. I got nothing, called Internet orders back at 8:30pm... went thru my history and asked them to do the rebuild. She transferred me to supervisor who REFUSED to rebuild my order, that is only for orders that have a technical error. She was also the first person from Verizon to tell me that they DO NOT ship orders in multiple shipments, they will only send when everything is available. She then said your order was given a delivery date of before 10/14 and that's when you'll get all your phones. I let her know that there is nothing about that confirmation that tells me that the phones that I ordered that had 9/19 deliver by dates would not be delivered then, 9/19 is before 10/14.

Same thing happened to me!!! They made a shady business move and they should be ashamed. Placed a pre-order for an Phone 6 and an iPhone 6 Plus at 2 AM on the 12th and got my pre-order in line just like everyone else did that morning. The 6 said delivery by 9/19 and the Plus was already back ordered to 10/7 but that's fine, I expected the Plus to be harder to get anyway. Being that both phones were eligible it made sense to just place one order given this hasn't been an issue in the past. However, Verizon moved my iPhone 6 pre-order delivery to coincide with the back ordered Plus so they don't have to ship each phone separately!!! I have to wait for something on backorder while the other is ready so they can save on shipping cost. I expected the one that I pre-ordered IN TIME FOR A 9/19 delivery and waited my turn "in (on)line" like everyone else I should get that when it told me that in the checkout, THEN send the Plus when it becomes available. I even have the confirmation email that says "Deliver by 9/19"!!! Every company you order from sends you the backorder item when it becomes in stock, they don't wait and hold the entire order for it. WHAT A BUNCH OF CRAP!!!

The ff default theme keeps re-enabling itself after computer restart even though I enable littlefox and restart firefox, and it does the same on more than one computer. I want littlefox to start with firefox, not have to enable every time.

I want littlefox to start with firefox, not have to enable every time the computer starts.

@kalos
Uninstalled everything PA, also uninstalled mangler which was the only thing that depended on PA. It didn't work anyway.
No pulseaudio --kill command so I couldn't run.
Checked systemd journal and there is no mention of PA this time.
Checked top, and grepped ps aux and there is no PA there either.
I also rebooted the machine completely just to make sure. However VLC and HTML5 have the same incompatibilities.
_ vlc Videos/anime/fmab/01.mp4
VLC media player 2.1.5 Rincewind (revision 2.1.4-49-gdab6cb5)
[0x1bc30f8] pulse audio output error: PulseAudio server connection failure: Connection refused
[0x1af4118] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
[0x7fb604001248] main vout display error: Failed to resize display
But the video and audio did work until I ran some HTML5 video, after which the audio worked, and then I opened it again and it didn't work...
@nomorewindows
I see. That's too bad. At least we're not alone.
Last edited by Greduan (2014-11-14 01:34:29)

I have a subscription to Adobe Creative Suite. Can I download a product onto more than one computer?

I have a subscription to Adobe Creative Suite. Can I download a product onto more than one computer? I have a PC and a Mac and it would be nice to use my Mac with Adobe InDesign.

If you mean Creative Cloud then yes, you can install and activate on two
machine with no regard to platform.
Bob

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don't know how indesign can do this action.

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don’t know how indesign can do this action.

set the wake-on lan on the main computer
The laptop's too far away from the router to be connected by ethernet. It's all wifi.
No separate server app on the laptop, it's all samba
The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
Last edited by saft (2010-03-18 20:38:08)

RegionRenderer encodeAll The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance.

Hi,
I am using JDEV 11.1.2.1.0
I am getting the following error :-
<RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.
Piece of code is for region is:-
   <f:facet name="second">
                                            <af:panelStretchLayout id="pa1"
                                                                   binding="#{backingBeanScope.Assign.pa1}">
                                                <f:facet name="center">
                                                    <af:region value="#{bindings.tfdAssignGraph1.regionModel}" id="r1"
                                                               binding="#{backingBeanScope.Assign.r1}"/>
                                                </f:facet>
                                            </af:panelStretchLayout>
                                        </f:facet>
How do I resolve it ?
Thanks,

Hi,
I see at least 3 errors
1. <RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components.
the page fragment should only have a single component under the jsp:root tag. If you see more than one, wrap them in e.g. an af:panelGroupLayout or af:group component
2. SAPFunction.jspx/.xml" has an invalid character ".".
check the document (you can open it in JDeveloper if the customization was a seeded one. Seems that editing this file smething has gone bad
3. The expression "#{bindings..regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "pePanel") evaluated to null.
"pageeditorpanel" does seem to be missing in the PageDef file of the page holding the region
Frank

Can you sign in with more than one apple id on an iPad?

Can you sign in with more than one apple id on an iPad?

Only one account can be signed in at a time (via Settings > Store), and if you turn on automatic downloads and/or download past purchases from an account then you risk tying the iPad to that account for 90 days : http://support.apple.com/kb/HT4627

HT1040 Is there a way to place an order with more than one item at a time? For example I am going to make a few books and have them all shipped to me. Do I have to order and pay shipping for each one individually?

Is there a way to place an order with more than one item at a time? for example I am making a few books and having them all shipped to me. Do I have to order each one separately and pay shipping each time?

You have to order each book separately, if the books are different. Only multiple copies of the same book can be ordered in the same order, see here
Regards
Léonie

My husband just got an IPAD and I have and I phone...Can more than one player sign in and play games on the I pad? (Example we both play tap fish...I want to sign into the game center and play my fish tanks ) Can this be done?

Can more than one player use the game center? I have an I phone and my husband just got the I pad I want to play my games on his i pad can I do this?(example we both play tap fish and tap hotel can I sign out of his login and sign into mine and play my game this way?)

If tap fish was an app purchased by both you can do that. If you yourself just purchased it and it's on the iPad, the iPad won't let you open it under your husbands I'd.since you have the rights, you bought it, it must be your apple I'd logged in. To do that go to settings, store, taptheapple I'd..sign out and sign in with yours. The gamecenter signing out and in will only help if youwant achievements or to play with your friends.

Can you sync an ipod nano 5th gen with more than one computer

Can you sync an Ipod nano 5th generations with more than one computer. One is a Dell with xp operating system and the other is an Mac laptop.

It is possible to sync your iPod with multiple computers, but syncing with different platforms is not supported by Apple. See this article for more details on how to get this set up.
http://support.apple.com/kb/HT1202
B-rock

I am using iPhoto 11 mail and cannot add more than one recipient in the 'to' line. When I put a comma in, the recipient's address is deleted. If I use ' ' with more than one recipient the save grays out. Any thoughts?

am using iPhoto 11 mail and cannot add more than one recipient in the 'to' line. When I put a comma in, the recipient's address is deleted. If I use '< >' with more than one recipient the save grays out. Any thoughts?

I figured it out. I needed to fix some errors in my account information. It works fine now.

Can you face time with more than one person at one time?

Can you face time with more than one person at one time?

You mean like a conference call? No, unfortunately.

Call Transaction and fill a select-options field with more than one value?

Hello everybody,
how can I fill a select-options field with more than one value.
Here is the code example:
CLEAR: GT_BDCDATA, GS_BDCDATA.
GS_BDCDATA-program = 'RHALEINI'.
GS_BDCDATA-DYNPRO = '1000'.
GS_BDCDATA-DYNBEGIN = 'X'.
APPEND GS_BDCDATA TO GT_BDCDATA.
CLEAR: GS_BDCDATA.
GS_BDCDATA-FNAM = 'PCHOTYPE'.
GS_BDCDATA-FVAL = 'P'.
APPEND GS_BDCDATA TO GT_BDCDATA.
CLEAR: GS_BDCDATA.
LOOP AT gt_hrobjinfty INTO gs_hrobjinfty.
    GS_BDCDATA-FNAM = 'PCHOBJID-LOW'.
    GS_BDCDATA-FVAL = gs_hrobjinfty-objid.
    APPEND GS_BDCDATA TO GT_BDCDATA.
    CLEAR: GS_BDCDATA.
ENDLOOP.
CALL TRANSACTION 'PFAL' USING GT_BDCDATA MODE 'A'
                   MESSAGES INTO GT_MESSAGES.
THX.

Hi,
Please refer the code below:
*Code used to populate 'select-options' & execute report
DATA: seltab type table of rsparams,
      seltab_wa like line of seltab.
seltab_wa-selname = 'PNPPERNR'.
seltab_wa-sign    = 'I'.
seltab_wa-option = 'EQ'.
* load each personnel number accessed from the structure into
* parameters to be used in the report
loop at pnppernr.
    seltab_wa-low = pnppernr-low.
    append seltab_wa to seltab.
endloop.
SUBMIT zreport with selection-table seltab
                                via selection-screen.
Thanks,
Sriram Ponna.

Can't add a goods-issue with more than one item and one is serial managed.

Hi,
We are trying to issue more than one item to a production order using the DI API. If none of the items is serial managed, they all are accepted and the goods-issue Add is successful. If one the items is batch-managed, the goods-issue Add is also successful. I am able to add the goods-receipt if I it contains only one item and it is serial-number managed. However, if Im issuing more than one item and one or more of the items is serial number managed, then the DI API will not add the goods-issue. The error message that appears refers to an item that is not among the items being issued. The message is:
-10: (IGE1.WhsCode)(line: 3), Item A00006        with system serial 1 is not in stock.
Again item A00006 is not even in the group of items being issued.
The code I am using for the serial number part is:
With oGoodsIssue.Lines.SerialNumbers
          .SystemSerialNumber = rs.Fields.Item("SysSerial").Value
          .ManufacturerSerialNumber = rs.Fields.Item("MfrSN").Value
          .InternalSerialNumber = rs.Fields.Item("IntrSerial").Value
          .SetCurrentLine(n)
          .Add()
          rs.MoveNext()
          n += 1
End With
The rs is a recordset that the code is looping through as the serial numbers are being added.
The error message does not occur during this code. It occurs when it tries to add the full goods-receipt. Does anyone have any idea how I can fix this?
Thanks,
Mike
Edited by: Mike Angelastro on Mar 31, 2008 8:43 AM

Hi Mike,
Try to do the ".Add" only if you need it. Doing a ".add" without assignation may cause the error you have.
I guess your n variable start at 1 or 0, so you could put code like this :
With oGoodsIssue.Lines.SerialNumbers
if n = 0 then (or 1, also I don't the correct syntax of your programming language)
.Add()
end if
.SystemSerialNumber = rs.Fields.Item("SysSerial").Value
.ManufacturerSerialNumber = rs.Fields.Item("MfrSN").Value
.InternalSerialNumber = rs.Fields.Item("IntrSerial").Value
.SetCurrentLine(n)
rs.MoveNext()
n += 1
End With
HTH
Jodérick

HT2905 How do I share my music that is bought and downloaded on the computer with more than one device?

I have two ipods for two kids, I have purchased the music and it is in my library and currently on one ipod, how do I share it with the other ipod?

The music is on a dell laptop? I told it to sync and it went through the sync process but no files were transferred. I have new music on both devices and want to update both. When I tell it to sync the music library it says "this iPad is synced with another iTunes library on Jordan's iMac (a device 8 no longer own). Do you want to erase this iPad and sync with this iTunes library.". What do I do about that?

By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and is it possible to install it on both Windows and Apple(if it comes with two licenses)? Thank you.

Similar Messages

Maybe you are looking for