Can I measure full bridge gage configurations with SCXI1121 and 1321 terminal

Hello
I designed a load cell that uses a full bridge gage configuration. I have at my lab a SCXI 1121 module with a SCXI 1321 terminal block. I need to know if it is possible to use that hardware configuration in order to make de load cell and the data acquisition system fully functional.
Thank you.
Best regards from Bogotá, Colombia, South America

Juan,
The full brige configuration you are speaking of requires four wires, two for voltage and two for excitation, is this correct? If so here is a link that you might find helpful.
Full Bridge Configuration
This reference is for strain gauges, but the connection for a full bridge is going to be the same. The channel plus and minus and excitation plus and minus can be connected to the 1321 for the individual channel. To configure the proper gain, filtering, and excitation mode and level, please refer to the Getting Started with SCXI on pages 3-14 through 3-23 (pages 51-60 in the .pdf).
Regards,
Andy F.
Applications Engineer
National Instruments
National Instruments

Similar Messages

How can I resize a pdf page content with annotations and highlights in Acrobat Pro?

How can I resize a pdf page content with annotations and highlights in Acrobat Pro while maintaining page size and annotation/highlight interactivity? I've tried to use the crop tool in Acrobat Pro (9) and the page does resize, but the highlights and annotations go all over the place. I specifically need to scale the page content smaller (83%) but maintain page size and annotation/highlight to content connection and interactivity.

An old trick (not recommended) would be to print to a new PDF with the page size selected but a scaling of the content. Only print the document, not the markup, to a new PDF. Close that PDF when done and reopen the old one (or maybe a copy of the old one for safety) and use Document Replace pages and select the new document to replace your current pages. You will then have to go back through the markup to locate it all correctly. There may be a more elegant way, but this may be the fastest.

How can I pair iPhone 6 / 8.1 with Audi and Mercedes until 8.1 is fixed?

How can I pair iPhone 6/8.1 with Audi and Mercedes

Generally your put the vehicle into discovery mode, turn Bluetooth on for the phone and the two should discover each other. I don't know what you mean about getting 8.1 fixed, as it is working just fine for me in my vehicle. Try going into the phone and removing the car(s) from the phone list. Turn off Bluetooth. Go into Settings>General>Reset Network Settings. Do a reset on the phone, hold the sleep/wake and home buttons together until you see the Apple Logo and release. The phone will reboot. Go into the vehicle(s) and remove all reference to the phone from the vehicle list. Turn the car off, then back on. Put the vehicle's system into discovery/pairing mode. Turn Bluetooth on for the iPhone. The two should pair after following any additional instructions from the vehicle's user guide, such as entering a PIN code.

Hi All, can i have some production support issues with rootcasue and resolution for SAP TM?

Hi All, can i have some production support issues with rootcasue and resolution for SAP TM?
Thanks,
Sreenivas

Hi Sreenivas,
I would recommend that you read the Rules of Engagement and other documents in the Getting Started link (top right) before posting anymore. Your Discussion will most likely get reported as non-specific and get removed. If you have a specific problem with TM, please post it in a new thread with error messages, version and SPs installed, and how the error occurs and what you are trying to get TM to do.
There are a lot of resources available in the TM Overview page which can help, so start there and maybe also look at some of the MKS (Monday Knowledge Session) recordings which should also be listed. There are also a lot of experienced people who can help resolve issues your TM installation, but you need to provide enough information on the problems you are having. If you are just looking for information on past problems, do a Search or simply browse through past Discussions which are marked with a green Check (Correct Answer).
Regards, Mike
SAP Customer Experience Group - CEG (and a Moderator)

I can not see my screen, but I can listen to notifications, listen to music with headphones, and my button locked not responds

I can not see my screen, but I can listen to notifications, listen to music with headphones, and my button locked not responds

I believe the keys on an imac are F11 and F12, for dark / bright respectively.
Try that, I think it'll work.
If not, then try out all the "F" keys, one of them will work.
Ben

TS3999 how can I stop syncing my outlook calendar with icloud and not loose the existing calandar data in outlook? the calendar data which downloads to outlook, was also wiped off the gmail calendar after the icloud sync , how can I restore the data to g

How can I stop syncing my outlook calendar with iCloud and not lose the existing calendar data in outlook? The calendar data which downloads to Outlook was also wiped off the Gmail calendar after the iCloud sync, how can I restore the data to Gmail?

same issue, looks like nobody answered you from last JULY....

I'm having trouble synching my Outlook Calendar with my iPhone. We use Outlook in my office so it's the only Calendar I use, so I can share inter-office Used to use Mobile Me and I terminated that. Prior to this Outlook synched fine. Prior to having m

I'm having trouble synching my Outlook Calendar with my iPhone iniTunes
We use Outlook in my office so it’s the only Calendar I use, so I can share inter-office
Used to use Mobile Me and I terminated that. Prior to this Outlook synched fine.
Prior to having my iPhone I only had one type of Calendar in Outlook
I know have 'Calendar 5' on my Outlook, but that doesn't show up on my iPhone.
iPhone does give me several other numbered Calendars – but no ‘Calendar 5’
I need to figure a way to get all this synched correctly
very frustrating!

Take a look of this link, http://support.apple.com/kb/HT1701

Measure 16 strain gages simultaneously with SBRIO 9626 + 2 NI 9235 modules

Hello everyone,
I am currently working on a deformation measuring application. I need to measure 16 strain gages simultaneously, using a SBRIO 9626 + NI 9693 (two C Slots) + 2 NI 9235. I started checking out the example included for measuring strain with shunt calibration on 4 gages with one 9235 module through the FPGA, modded it to read 8 gages without any issue.
The problem comes up when i try to use two modules for reading 16 gages. I modified the getting started example in serveral ways without any success, only can read continuously the 9235 on slot 1, and apparently, i only get an initial reading on the other 9235, and then nothing more. Below is attached the code (note that i am no expert on FPGAs, and i've been trying different configurations, and at some point, not precisely knowing what i was doing ), any advice on how to put both 9235 to work simultaneously will be appreciated.
thank you.

Hi s.jimenez
First of all, thank you for your prompt answer. Regarding your suggestion, i hadn't checked the Basic Synchronizing NI 923x example, my bad . After reading and understanding it a little, i tried to adapt it to my situation, sadly with no success. Some of the mistakes that i corrected were:
one FIFO for acquiring data from both modules
used single I/O nodes for start/stop and acquiring data from both modules
changed the clock settings of the modules to: slot1 module providing clock signal for the slot2 module
the only big difference that i notice between the example is that i added the shunt calibration procedure to the sequence, do you think this is the problem?
summing up, i havent been able to obtain continuous readings from the second module, any additional help could be greatly appreciated.
best regards.

Can URL redirects be configured with XE and what is the HTTP Server

I would like to be able to URL redirects. I'm running XE with Application Express 2.1.0.00.39.
I want to be able to have a URL like www.schoolwebsite.com and when the user hits it - have it redirect to the Apex page for the application. I was thinking that I needed to use a redirect in the HTTP config file, and that XE used Oracle_HTTP and I could configure in that manner.
But, I can't find an Apache directory.
1. What HTTP server is used with XE and Application Express 2.1.0.00.39?
2. Can I configure for this type of redirect?
3. Do I need to install an HTTP server to accomplish this?
Thanks,
Stephen

Hi Steven,
search for "proxy" in this forum.
It explains how to configure a plain Apache http server as a proxy to XE. Then you can use the default mechanisms to rewrite an url.
Here is an example (save the file as XE.conf and store it in the Apache conf directory (file httpd.conf is there).
The following instructions are valid for Apache2.
# Activate the following modules in httpd.conf:
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule rewrite_module modules/mod_rewrite.so
#LoadModule headers_module modules/mod_headers.so
# include the XE configuration (this file XE.conf) in httpd.conf:
#include "conf/XE.conf"
# XE listener is buggy, thus downgrade to http 1.0
SetEnv force-proxy-request-1.0 1
RewriteEngine On
RewriteLog "D:\Programme\Apache Group\Apache2\logs\rewrite.log"
RewriteLogLevel 0
## Rewrite requests /apex, /i, /public, /sys to locally installed XE
RewriteCond %{REQUEST_URI} /(([^/]+)(/.*)*)$
RewriteCond %2 =apex [OR]
RewriteCond %2 =i [OR]
RewriteCond %2 =public [OR]
RewriteCond %2 =sys
RewriteRule ^/(.*) http://%{SERVER_NAME}:8080/%1 [P]
## Rewrite main page
RewriteEngine On
RewriteRule ^/$       http://%{SERVER_NAME}/apex/f?p=107:1 [R]
RewriteRule ^/index.html$       http://%{SERVER_NAME}/apex/f?p=107:1 [R]
## Rewrite /app1
RewriteRule ^/app1$      http://%{SERVER_NAME}/apex/f?p=107:1:0 [R=303]Regards,
~Dietmar.
Edited by: Dietmar Aust on Oct 14, 2008 1:16 AM

How can I get full screen to work with utube in google chrome?

When I use utube in google chrome I can not get full screen to work. How can I fix this?

See: http://forums.adobe.com/thread/1193685
also: http://helpx.adobe.com/flash-player/kb/enable-system-flash-player-google-chrome.html

How can I access full Exchange email features on iOS and android?

I currently use a virtual exchange server (2010) in conjunction with outlook 2007. I have several distribution groups set up so I can send from different email addresses through a single exchange server mailbox. This works fine on windows pcs. Unfortunately
I have not found a way of accessing this full exchange functionality on either my android phone or my iPad. Neither the stock mail apps nor any third party mail apps I have tried support the use of distribution group From fields. Worse, the Outlook Web App
that is fully featured on my windows pcs (where I don't need it) for some reason becomes a light version when accessed on an iPad air or android phone. The light version does not support From fields at all, whether distribution group based or not. I have tried
using safari and dolphin and OWA always defaults to and won't let me change from the feature crippled light version.
Does anyone have any ideas as to how I can access Exchange's changeable From fields on iPad or Android phone?

Hi Lucio,
I found a solution eventually but it is not very elegant. You need to use an iPad web browser that can fool the Exchange server's web interface into believing it is a desktop browser not a tablet browser! Unticking the "use light version" checkbox
does not work on Safari and all other mainstream browsers I have tried despite what Microsoft claims on its help pages - it will always force the reduced features version on you. There are a few iPad browsers that allow you to select desktop emulation. I use
one with the bizarre name of KissMyAgent and in desktop mode I can load the full version of OWA although it is not a smooth user experience.
As for dedicated mail apps, I looked at all the free ones and they didn't as at Feb 2014 and also emailed all the developers of the premium ones and they all confirmed they didn't either. If anyone knows of any dedicated mail apps that support the full Exchange
features (see my OP), please let us know!

How can one store hd video for use with ipad and apple tv?

I'm looking for solutions. I don't have a computer. Not interested in renting what i really like or collecting blu rays.
Buy enough hd video films from the store and the iPad runs out of hard drive. I could buy more storage from the iCloud. What else could I do? The new apple tvs don't have a hard drive for storage. Hypershop.com has a hyperdrive external drive for the iPad, but 720P, is that full HD? They also have a new kickstarter funded product cloudFTP which connects hard drives etc to the iPad wirelessly. Not sure if this would work ok.
Any other ideas?

There are some cables you can use. Depends on what model iPad you have and what interface is on the projector. You could also get a router to take with you and set up your wifi connection. There's some portable routers.
You can connect via a cable or wireless using an Apple TV.
http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htmhttp://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
Connect an iPad to a Television or Projector
http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
Connecting iPad iPhone or iPod to TV or Projector
http://www.disabled-world.com/assistivedevices/computer/ipad-tv.phphttp://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
iPad Accessories: Connections for a TV or Projector
http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.htmlhttp://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
You may be interested in AirPlay on the Apple TV:
http://www.apple.com/airplay/http://www.apple.com/airplay/
http://www.apple.com/airplay/http://www.apple.com/airplay/
Alternately, there are Apple Digital AV Adapters for hardwired connections:
http://support.apple.com/kb/ht4108http://support.apple.com/kb/ht4108
http://support.apple.com/kb/ht4108http://support.apple.com/kb/ht4108
Portable routers http://compnetworking.about.com/od/routers/tp/travel_routers.htm
 Cheers, Tom

Solaris 10 zone configuration with sysidcfg and dhcp and hostname

Hi
Excuse me if I look like a n00b... it's probably because I'm a n00b.
I've been struggling in the dark for more than 2 days now and I'm wondering if I'm thinking about this all wrong...
I have stand-alone server where I need to run zones. I want to create zones and automagically configure them at boot (read: by running a script). So here's what I need...
A zone
starting from unconfigured state
whose hostname is not the same as the zone name
using corporate DHCP to get its IP address
with DNS config coming from the DHCP server
registering its address the DNS
with a preconfigured root password
(I don't own the corporate DHCP or DNS servers, I can't put my own DHCP or DNS servers on the network.)
I would lke to create the zone, throw some config at it, then boot the zone and walk away. I am using zones with exclusive-IP. I can construct the zones and manually configure them once they're started to have DHCP, my own name, registered IP address with DNS and everything else I have specified above. But I don't want to do it manually...
Sysidcfg seems to do some of what I want but not entirely.
In sysidcfg I can set the root_password, the primary interface using DHCP, DNS server. I can't set a hostname in sysidcfg AND use configure it for DHCP. So the hostname is not what I want it to be after the zone is started and ready to go. The DHCP server is providing the DNS configuration, Solaris does not seem to honour it, but i'll ignore that for the moment.
I have tried various combinations of using sysidcfg, /etc/nodename, /etc/hostname.+interface+ and /etc/dhcp.+interface+ but I can't find any combination that actually works.
I can write to the zonestorage/etc/nodename to set the nodename, that works. But it does not match the DHCP address, so I get prompted for a new name service because it can't find a DNS entry for the name.
I can write to the zonestorage/etc/hostname.+interface+ and /etc/dhcp.+interface+ (to get the system to register its name with the DNS server after getting its DHCP address) but then I get a system with no root password and no DNS configuration, even though they are set in the sysidcfg file.
I can write a script that gets part of the way using sysidcfg and /etc/... files, then boots the zone and then runs a bunch of voodoo via zlogin commands to fix all the stuff that couldn't be done 'properly', but that's not a 'boot and walk away' environment. I can write a script that uses sysidcfg and hacks around with other files in /etc (like nsswitch.conf, resolv.conf), but that just feels likes a dirty hack to fix something that wasn't done properly in the first place.
So where am I going wrong and how do I do it right (within the constraints defined)? Why can't I configure, boot and walk away?
Thanks

Thanks abrante
Thanks for your response!
I don't think the config is messed up after the installation. I think the installation is fine, it's just not what I want :-)
I'm trying to decouple the zonename from the system name and get DNS registrations working. After installation, a DHCP client can get its hostname from DNS but I'm trying to do it the other way around. I want the DHCP client specify its own hostname, get an address from the DHCP server and then register its hostname with DNS. If the system gets its name from DNS/DHCP then I have to configure those to provide the system name and I don't own the DHCP/DNS infrastructure. These zones are for a development/QA environment, so we create and reconfigure these frequently. Hence the need to specify the system name within the zone and register that name in the DNS.
I have tried fiddling with the PARAM_REQUEST_LIST but it does not seem to be working as I expect. :-$ Removing 12 did not help with setting the hostname from the system. DNS does not have a registered name for this system anyway, so even if it tried to get a name for this system, it would get nothing.
I also do want the DHCP to change the DNS server and domain name, but this does not happen even though my dhcpagent includes 6 and 15 in the PARAM_REQUEST_LIST. I still have to set them in the sysidcfg file because it is always ignored in Solaris (S10u8 with 10_Recommended 30-Jul-2010)
As stated, I know I can hack around with the system after it has booted. But I'm trying to configure the system before it starts and let it take care of itself and not have to touch it. Frankly I'm surprised that the sysidcfg does not allow you to set a hostname name when you are using DHCP, that the default DHCP configuration does not register the system name with the DNS server, and the DNS config from the DHCP response is ignored. Even a sys-unconfiged system requires DNS configuration during initial boot, when I know that the DHCP response contains DNS information.
FYI: Windows systems using DHCP work as expected in this respect by default, i.e. set system name, use DHCP --> system gets address from corporate DHCP, DNS settings are set from DHCP information, DNS registration is made for system name.
I'm working around this at the moment... I call my zone by the system name I want, I hardcode the DNS settings in the sysidcfg file and I create the hostname.+nic+ and dhcp.+nic+ files in the zone storage to get the system to register its name with DNS, them boot.
Edited by: cydonian on Aug 19, 2010 7:45 PM

Can i take my apple tv away with me and watch my films which are on my mac at home.??

hi,
i am soon to be working away from home, and as an alternative to the pub i hoped that i would be able to access my films and music through my apple tv via wifi which i will have in my digs.
is this possible??
i also have an ipad with a lead to connect to a tv, could i use this??? without saving films onto it.....
if not how can i best work this??!!!
very many thanks.....
phil

As I was saying earlier that is not possible because the Apple TV has no accessible storage and streaming from your iMac is done via home sharing on your local network.
iTunes purchases can be accessed via the cloud on Apple TV. If you have iTunes Match you can access your full music libary from the cloud.
Using the iPad to watch your films would require syncing them and then connecting the iPad to a TV.

X-configure with AMD64 and ATI 4250HD fails

I have just installed Arch
I figured to install gnome-shell would do all, but not,
i did pacman -S xorg to install the X
and After that I run X-configure and it gave me some errors.
As i have ubuntu and the .run ati installer I installed the fglrx driver at Arch, did not work
I copied my ubuntu xorg.conf not work too
I edited xorg.conf to put "radeon" driver instead of "fglrx"
i also installed gnome
i tried X-configure severla times and give me errors of "other drivers ot ati"
I tried to remove xorg "pacman -R xorg", impossible
I tried to reinstall and instead of install all, install only 13 the ati driver, nothing.
The Xorg man page says that there are some problems with X-configure sometimes.
As AMD64 +ATI is a common config, and sure there are some gurus that has this config working with the X
I suggest, not only publish it, making arch packages for this not working with X-configure configuration to be detected and well configured.
Last time I installed Arch was less diffcult but editing manually xorg.conf I was able to do it, I'm revisiting this distro, and is not very comfortable to install the X
even if it did work.
But thanks in advance if anyone can give me a xorg.conf that works

karol wrote:
glaiky wrote:In addition to xorg you need to install xorg-xinit. If you have installed the ATI proprietry driver, run (as root) aticonfig --initial to create an xorg.conf file. Add 'nomodeset' to /boot/grub/grub.lst (on the line that points to your kernel.
What do you mean "In addition to xorg"? 'xorg' is a group one shouldn't ever need to install whole.
As you've already explained.
In addition to everything else others have said, mitcoes, per the Beginner's Guide [ https://wiki.archlinux.org/index.php/Be … #Install_X ] follow what it recommends, albeit it's notable the guide presumes this is a new install. If you intend on using Catalyst, the link is available there for the ATI Catalyst instructions.

Can I measure full bridge gage configurations with SCXI1121 and 1321 terminal

Similar Messages

Maybe you are looking for