Clear guides in Photoshop CS4 JS
Hi, I couldn't find anything in OMV or in the forum on how to remove existing guides in Photoshop. The help is highly appreciated.
Yulia.
You have to use scriptlistner to clear the guides
function clearAllGuides() {
var desc = new ActionDescriptor();
var ref = new ActionReference();
ref.putEnumerated( charIDToTypeID( "Gd " ), charIDToTypeID( "Ordn" ), charIDToTypeID( "Al " ) );
desc.putReference( charIDToTypeID( "null" ), ref );
executeAction( charIDToTypeID( "Dlt " ), desc, DialogModes.NO );
Similar Messages
-
Blurry Guides in Photoshop CS4 extended
I have just moved onto Ps CS4 and I am getting annoyed at the fact that my guides are appearing as thick blurred lines when viewing the document at 100%. I have never had this problem before and it's very frustrating.
Can I do anything about it?
Hardwear wise I have a mac pro, 7GB ram, NVIDIA GeForce 7300 GT with 2 DELL 2001FP monitors.
see the attached pic for how the guides look
Please any help is very much appreciated
Thanks
AdeIts probably some graphics card related issue. Preferences > Performance - disable Open GL, to confirm that this is the problem.
I have one mac with the same graphics card (GeForce 7300 GT) and don't see this issue when Open GL is enabled. So you have some issue thats unique to you, sounds like.
Technically speaking, the 700 GT is not one of the supported Graphcs cards by Adobe for CS4's Open GL features. But I have found personally that enabling Open GL and disabling "Advanced Drawing" under Advanced settings, these cards seem to work without any serious issues -
Bug report in photoshop CS4 scripting guide
page 37 6th line from bottom
var colorRef = new solidColor
should read:
var colorRef = new SolidColor (note caps)
this will cause an error. not sure who I should report this, but I'm sure it would frustrate some people out there just learning.Photoshop CS4 Javascript Ref.pdf
Page 50 is still showing the following as usable commands:-
makeContactSheet,
makePDFPresentation,
makePhotoGallery and
makePicturePackage -
Photoshop CS4 Tested Video Cards
This article lists the video cards tested with Photoshop CS4.
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb405711&sliceId=1
In addition to the cards it's important to be patched to 11.0.1 and to have the latest video drivers.
BobQuote from: Bas on 26-May-10, 02:53:16
Useless if we don't know the rest: >>Posting Guide<<
I believe that many on this forum were not very helpful on understanding problems with 890FXA-GD70
Most people come here to solve problem before asking MSI Tech support, because myself and many other think they are well skilled user here, but I do say there lack resource here to do any testing. There really no need to post any more info about this issue, but at this time those video card didn't work until bios 1.6. Clearly it not PSU, CPU, or RAM causing this issue, which I've already made clear in other post.
I was welcome to more feedback on any other video cards that didn't work. At the end of the day only thing we could have really do is report back to MSI about our problems.
I do think that when comes down to it, big issue that impact many user in same way, only really support is contact the manufacture. Along the way I do my best to help everyone, at the end of this problem I'm happy to report that I took the time to solve and answers the questions of user using this board, well I do this daily anyway ~yawns~ make me so tired
Sorry I can't help more on this forum as much as I could, I personal can't handle doing whole posting and waiting system.
This fox like IM or Voice over the forum, get job done faster and adds a personal touch.
Foxler -
Using Lightroom 5 with Photoshop CS4
Hi folks. New Here. I am a novice convert to digital photography and I have browsed the discussions concerning Lightroom and Elements in the main.
Is there any need to buy Lightroom 5 to deal with cataloguing and searching imported RAW images with Photoshop CS4, as Photoshop Bridge 4 comes with Photoshop CS4? What is a good strategy for dealing with libraries of images? I have the chance to aquire inexpensive versions of LR 5 and P CS4.
For your information - I am using a MacBook Pro with a quad core i7 processor, 16 GB RAM, 1 TB Flash drive and my camera is a Canon PowerShot SX50 HS.
Many thanks.Thanks 99jon,
I appreciate the careful and easy to understand reply, Jon99. Versions of P higher than CS4 are prohibitively expensive for me at this stage. If I get on with digital photography then I might look at the PCS and L CC subscription option in the future.
I went ahead I aquired my bargain basement version of P CS4 and like it so far, but I held back on LR5 until I had a clearer view of what it enables me to do and thanks for the information.
Do you or anyone know if I can sell my version of P CS4 when if I decide to move up to the Cloud solution? Flicking through another Pogue-style book seems to suggest that the latest versions of P CS and L are the current state-of-the-art. Is there a simple list of what users of this option consider to be the main, *essential* improvements of the latest versions of these two pieces of software that possibly make it a must-purchase. I am not after an exhaustive list, but just the main improvements that may make this an essential purchase after I cut my teeth with P CS4.
I am a real novice and have included the specs of my camera and MacBook Pro in my previous post for anybodies info in order to help me.
Many thanks,
David -
Photoshop CS4 Crashes on File-Open
After using Photoshop CS4 for 9 months, I now get an instant crash whenever I open an image with File-Open. I see the image I wanted to open for a few seconds at the back of the error message (1st screenshot, below) and then it disappears - on clicking OK on the first error message, I get a second error message (2nd screenshot, below). I upgraded to version 11.0.1 - no difference. I have completely uninstalled all plug-ins - no difference. I have completely uninstalled and then reinstalled Photoshop to version 11.0 - no difference. I have upgraded a clean install to version 11.0.2 - no difference. I have deleted the prefs file - no difference. I deleted a set of new fonts I had installed after reading a thread on this forum - no difference. Occasionally, I CAN open a file from Windows Explorer with the right-click menu Open With... Adobe Photoshop CS4 then, after doing that, FIle Open does not cause a crash for opening one file, sometimes 2 but then I get the crashes again until the next time I run Photoshop but it seems random as to when it will open a file or not.
I am now considering uninstalling all Adobe products, manually clearing out the registry and then trying another install but all this is taking time I don't have.
Does anyone have any other suggestions I could try. I am getting desperate!
Thanks in advance for any help you can give.Memory address issues can be tough to track down. Often, they will occur when a program either mis-reports the memory addresses used, or tells the OS that it has released them, when it has not.
Though written with video editing in mind, there still might be some tips for setting up your computer, in this ARTICLE. If you have Win7, please look down-thread for Black Viper's tuning page.
Now, Adobe programs have always been great at reporting their memory usage, but it could still happen - I've just never encountered it over the decades.
Good luck,
Hunt -
Photoshop CS4 and Grab crashing saving images
I did an upgrade from 10.5.8 to 10.6 and I am having issues with what seems to be image files. When I save a screenshot from Grab to a .tiff it crashes 90% of the time. Saving in Photshop a JPEG also crashes photoshop cs4. Anyone have any ideas? Ive included some logs below..
8/30/09 3:48:59 AM [0x0-0x106106].com.apple.Grab[1611] Grab(1611,0x7fff70d57be0) malloc: * error for object 0x114b07c90: pointer being freed was not allocated
8/30/09 3:48:59 AM Grab[1611] Grab(1611,0x7fff70d57be0) malloc: * error for object 0x114b07c90: pointer being freed was not allocated
* set a breakpoint in mallocerrorbreak to debug
8/30/09 3:48:59 AM [0x0-0x106106].com.apple.Grab[1611] * set a breakpoint in mallocerrorbreak to debug
8/30/09 3:49:06 AM com.apple.launchd.peruser.501[179] ([0x0-0x106106].com.apple.Grab[1611]) Job appears to have crashed: Abort trap
Full crash report at http://pastebin.com/f2b3da603
Then for Photoshop CS4
8/29/09 3:06:12 PM [0x0-0x73073].com.adobe.Photoshop[827] Adobe Photoshop CS4(827,0xa0139500) malloc: * error for object 0x49085e0: Non-aligned pointer being freed (2)
8/29/09 3:06:12 PM [0x0-0x73073].com.adobe.Photoshop[827] * set a breakpoint in mallocerrorbreak to debug
8/29/09 3:06:12 PM [0x0-0x73073].com.adobe.Photoshop[827] Adobe Photoshop CS4(827,0xa0139500) malloc: * error for object 0x4908760: Non-aligned pointer being freed (2)
8/29/09 3:06:12 PM [0x0-0x73073].com.adobe.Photoshop[827] * set a breakpoint in mallocerrorbreak to debug
8/29/09 3:06:12 PM [0x0-0x73073].com.adobe.Photoshop[827] Adobe Photoshop CS4(827,0xa0139500) malloc: * error for object 0x49087a0: Non-aligned pointer being freed (2)
8/29/09 3:06:12 PM [0x0-0x73073].com.adobe.Photoshop[827] * set a breakpoint in mallocerrorbreak to debug
8/29/09 3:06:23 PM Adobe Photoshop CS4[827] CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
8/29/09 3:06:23 PM Adobe Photoshop CS4[827] CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
8/29/09 3:06:23 PM Adobe Photoshop CS4[827] CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
8/29/09 3:06:23 PM Adobe Photoshop CS4[827] CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
8/29/09 3:06:23 PM Adobe Photoshop CS4[827] CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
8/29/09 3:06:23 PM Adobe Photoshop CS4[827] CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
8/29/09 3:06:23 PM Adobe Photoshop CS4[827] CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
8/29/09 3:06:23 PM Adobe Photoshop CS4[827] CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
8/29/09 3:06:23 PM Adobe Photoshop CS4[827] CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
8/29/09 3:06:25 PM [0x0-0x73073].com.adobe.Photoshop[827] Adobe Photoshop CS4(827,0xa0139500) malloc: * error for object 0x493c2e0: Non-aligned pointer being freed (2)
8/29/09 3:06:25 PM [0x0-0x73073].com.adobe.Photoshop[827] * set a breakpoint in mallocerrorbreak to debug
8/29/09 3:08:23 PM com.apple.launchd.peruser.501[179] ([0x0-0x73073].com.adobe.Photoshop[827]) Job appears to have crashed: Bus error
Full crash report at http://pastebin.com/f6a4ac2a8I too was having the same problem with Web Premium CS3. Working with my previously created animated GIF files, or certain JPGs were causing either Ps to crash or even Safari to crash when I was trying to attach those same files and send them to clients via email. I got frustrated and am reinstalling the OS from scratch. I have a solid backup and thought this might clear up things (not to mention make me feel better cause I am cleaning house at the same time). Just now going through the forums to find others are having the same issues. If this does not fix the problem, I shall be back for more assistance. As a graphic/web designer, working in graphic files is my life (bread & butter).
-
How can I move Photoshop CS4 from an old MacBook to a new one without instal disk
Hi there,
I have purchased a new laptop and I would like to move Photoshop (CS4) to the new one but I don't have the disk.
Could anyone help guide me on how to proceed?
Thanks!Download CS4 and install it. Download CS4 products
-
HELP- Printing Problem with Photoshop CS4
Hello Everyone,
I just bought the PHOTOSHOP CS4, and I am having problem when it prints. The image is not clear, it has dots (pixels). This computer where I installed this program is brand new. I have previously worked with Photoshop CS2 and never had an issue but was force to buy this new one because the computer that I bought has Windows Vista and CS2 is not compatible. I thought maybe the problem was my printer but is not I have a Brother HL-5140 (black and white). I have connected my old computer with the printer and the images print perfectly fine. I have printed photos and it prints clear. But this only happens with Photoshop CS4. It prints dots, can someone please help me. Is driving me crazy.Really I'd be willing to bet it's your driver under Vista.
I have the same problem using Vista and a older HP LaserJet, under XP and CS2 it prints well. Under Vista it's a bunch of dithered pixelated dots.
They want you to buy a newer printer. -
Printing problem with Photoshop CS4
Hello Everyone,
I just bought the PHOTOSHOP CS4, and I am having problem when it prints. The image is not clear, it has dots (pixels). This computer where I installed this program is brand new. I have previously worked with Photoshop CS2 and never had an issue but was force to buy this new one because the computer that I bought has Windows Vista and CS2 is not compatible. I thought maybe the problem was my printer but is not I have a Brother HL-5140 (black and white). I have connected my old computer with the printer and the images print perfectly fine. I have printed photos and it prints clear. But this only happens with Photoshop CS4. It prints dots, can someone please help me. Is driving me crazy.I haven't heard of anyone else with those specific symptoms.
But another poster has had problems with his Canon 9900 not printing (but no blank page).
The first thing to do is make sure you are using the Canon drivers and not the GutenPrint/GimpPrint drivers.
After that, you probably need to check with Canon. -
Canon CR2 Raw files won't open in Photoshop CS4
I'm using a Canon EOS 600D (aka EOS Kiss X5), Photoshop CS4 (ver 11.0.1) with Camera Raw 5.7.0.213.
CR2 Raw files won't open in Photoshop, though the thumbnails are clearly visible and open in Windows Explorer.
Any suggestions?
ThanksYes, absolutely all of the quality and dynamic range is retained in the DNG, because it is still raw data.
Outside of upgrading to Photoshop CS5, which can open your files directly with Camera Raw 6.4.1, your only choice is the extra step of converting the .CR2 files to .DNG with the free DNG converter.
While you'll get all the quality your Camera Raw 5.x converter can deliver, you should keep in mind the Camera Raw 6.x converter has an entirely new, additional "2010 process" for converting raw images, which (depending on your settings) can actually deliver a higher quality conversion than the one you're getting with Photoshop CS4. I think it's worth the cost of the Photoshop upgrade, personally.
-Noel -
Photoshop cs4 bridge,getting not enough storage message.
I have a computer that the motherboard died a couple of weeks ago. The motherboard and processor have been replaced as well as upgrading the ram from 4 gb to 12. We were able to use the old hard drive with no problems, maybe, just booted it up yesterday and am still working things out. Photoshop cs4 was installed on the computer and it seems to be working fine, except that I'm getting "not enough storage" messages when I try to do things I was able to do before the colapse. One thing I've noticed is that in the 32 bit version of Photoshop preferences it shows around 3 gb of ram available while the 64 bit version shows the full 12gb. Is this typical? and if not why would it be showing up this way? I'm not sure that has anything to do with the problems with bridge it is a stand alone program now. Anyway, does anyone have any idea what could be the problem with this? Would uninstalling and re-installing the programs help?
Windows 7 Home Premium 64 bit system
12 GB RAM
I'm not sure what else would be needed about the computer, let me know if there is anything else.
Thanks for any help,
LindaIs the "not enough storage" error message showing up in Bridge or Photoshop? I ask that because it seems to be a Bridge error message and the Bridge forum could better handle that.
If Photoshop is giving you this message, check your Preferences > Performance and see that the ram allocated is not more than 65-70% of total and look at your scratch disk allocation in that section as well.
I would also consider resetting Photoshop's preferences. Sometimes that clears up problems, and of course be sure you install the latest CS4 updates.
I'm assuming you have to use 32 bit Photoshop CS4 (example32 bit third party plugins). If not use 64 bit CS4 and see if that works.
I'd heed the upgrade advice as well. After December, CS4 to CS6 upgrade price will increase from $200 to $700. -
Using multiple pens with Photoshop CS4
Hello,
as some of you already know, in older Photoshop versions (5.0 and 5.5) there was a possibility to use multiple pens with the help of the old Wacom Tool-ID Plugin.
Isn't there any way to port this old plugin to Photoshop CS4? I would like to use my Airbrush & Grip Pen with different colors and brushes by simply changing them.
If this way is impossible, would it be too difficult to create such a plugin by myself? (With the Photoshop SDK and so on).
thanks,
Matthias ClasenThanks 99jon,
I appreciate the careful and easy to understand reply, Jon99. Versions of P higher than CS4 are prohibitively expensive for me at this stage. If I get on with digital photography then I might look at the PCS and L CC subscription option in the future.
I went ahead I aquired my bargain basement version of P CS4 and like it so far, but I held back on LR5 until I had a clearer view of what it enables me to do and thanks for the information.
Do you or anyone know if I can sell my version of P CS4 when if I decide to move up to the Cloud solution? Flicking through another Pogue-style book seems to suggest that the latest versions of P CS and L are the current state-of-the-art. Is there a simple list of what users of this option consider to be the main, *essential* improvements of the latest versions of these two pieces of software that possibly make it a must-purchase. I am not after an exhaustive list, but just the main improvements that may make this an essential purchase after I cut my teeth with P CS4.
I am a real novice and have included the specs of my camera and MacBook Pro in my previous post for anybodies info in order to help me.
Many thanks,
David -
I Can't Open VIDEO LAYER on PhotoShop CS4
I cant speak good english im sorry but i will try Before 1-2 mounts i can open video layer on Adobe PhotoShop CS4 .. Now when i open video layer on Photoshop , the layer is WHITE . SO WHITE i mean WHITE no picture just white blank on the background.I can open video layer without any error message but there is no video , there is just a stupiid white blank on the background . , , , , Please help me its reallt annoying
.. I hope you guys understood me very well (i tried )....Thank you im waiting you answer.....
people i trid to Explain My problem with VIDEO This time.. SO PLEASE WATCH that video..i uploaded to youtube ,,, please watch it and help mee...... Thank you alot.. The LINK http://www.youtube.com/watch?v=XmZnD9geoc4
IF SOME1 Gonna say you are at the wrong forum again.. im gonna .... i dont know.. if im at wrong forum again tell me the right forum. thank youYou updated Quicktime or your Windows Media Architecture, used a different CoDec in your video, use an incompatible Codec to begin with. Furthermore, you could have upgraded your graphics card drivers, messing around with hardware accelerated playback. Really not clear. you need to provide more info about the matter, even more so, as you use non-standard video player software in your demonstration video and it's unclear, if any other tool based on Windows Media Architecture or QT would play the videos without problems. and please, don't use excessive formatting in your posts, it is bad conduct and very impolite to "scream".
Mylenium -
Photoshop CS4 won't open RAW files
Photoshop CS4 will not open RAW (.CR2) files. I have tried what is listed on Adobe's website (checking versions, uninstalling, reinstalling). Nothing has worked. It still gives me the error message: "Could not complete your request because Photoshop does not recognize this type of file."
I am using CS4 on a 10.6.6 Mac OS with a Canon Rebel XS. I currently have Camera Raw 5.7 installed.
Does anyone have any answers ?
Thank you,
TeresaThe CAT.CR2 file that was posted is from a 1000D that does not have sRAW capabilities. Comparing the ExifTool data and the camera specifications, there should have been a small-sized preview JPG image and a large-sized RAW image in the file, but the file was truncated after the top-left quadrant of RAW data was written:
http://www.dpreview.com/reviews/canoneos1000d/page3.asp
ExifTool Version Number : 8.09
File Name : Cat.CR2
Directory : P:/Pictures/home/xfer_Other/7DTests/Misc
File Size : 3.1 MB
File Modification Date/Time : 2011:02:17 19:41:05-06:00
File Permissions : rw-rw-rw-
File Type : CR2
MIME Type : image/x-raw
Exif Byte Order : Little-endian (Intel, II)
Image Width : 1936
Image Height : 1288
Bits Per Sample : 8 8 8
Compression : JPEG (old-style)
Make : Canon
Camera Model Name : Canon EOS DIGITAL REBEL XS
Preview Image Start : 42816
Orientation : Horizontal (normal)
Preview Image Length : 356052
X Resolution : 72
Y Resolution : 72
Resolution Unit : inches
Modify Date : 2011:02:10 00:34:31
Exposure Time : 1/50
F Number : 5.0
Exposure Program : Aperture-priority AE
ISO : 800
Exif Version : 0221
Date/Time Original : 2011:02:10 00:34:31
Create Date : 2011:02:10 00:34:31
Components Configuration : Y, Cb, Cr, -
Shutter Speed Value : 1/49
Aperture Value : 5.0
Flash : Off, Did not fire
Focal Length : 30.0 mm
Macro Mode : Normal
Self Timer : Off
Quality : RAW
Canon Flash Mode : Off
Continuous Drive : Single
Focus Mode : Manual Focus (3)
Record Mode : CR2+JPEG
Canon Image Size : Large
Easy Mode : Manual
Digital Zoom : None
Contrast : Normal
Saturation : Normal
Metering Mode : Evaluative
Focus Range : Not Known
Canon Exposure Mode : Aperture-priority AE
Lens Type : Canon EF-S 18-55mm f/3.5-5.6 IS
Long Focal : 55 mm
Short Focal : 18 mm
Focal Units : 1/mm
Max Aperture : 4.4
Min Aperture : 29
Flash Activity : 0
Flash Bits : (none)
Zoom Source Width : 0
Zoom Target Width : 0
Manual Flash Output : n/a
Color Tone : Normal
SRAW Quality : n/a
Auto ISO : 100
Base ISO : 800
Measured EV : 7.75
Target Aperture : 5
Target Exposure Time : 1/51
Exposure Compensation : +1/3
Slow Shutter : None
Shot Number In Continuous Burst : 0
Optical Zoom Code : n/a
Flash Guide Number : 0
Flash Exposure Compensation : 0
Auto Exposure Bracketing : Off
AEB Bracket Value : 0
Control Mode : Camera Local Control
Measured EV 2 : 7.75
Bulb Duration : 0
Camera Type : EOS High-end
ND Filter : Unknown (-1)
Canon Image Type : Canon EOS DIGITAL REBEL XS
Canon Firmware Version : Firmware Version 1.0.7
Owner Name :
Camera Body No. : xxxxxxx102
Flash Metering Mode : Off
Camera Temperature : 27 C
Camera Orientation : Horizontal (normal)
Focus Distance Upper : 0.28
Focus Distance Lower : 0.27
White Balance : Auto
Firmware Version : 1.0.7
Directory Index : 100
File Index : 452
Canon Model ID : EOS Rebel XS / 1000D / Kiss F
Thumbnail Image Valid Area : 0 159 7 112
Serial Number Format : Format 2
AF Mode : Off (Manual Focus)
Num AF Points : 7
Valid AF Points : 7
Canon Image Width : 1936
Canon Image Height : 1288
AF Image Width : 3888
AF Image Height : 2592
AF Area Widths : 194 139 139 194 139 139 194
AF Area Heights : 139 194 194 194 194 194 139
AF Area X Positions : 0 -1283 -769 0 769 1283 0
AF Area Y Positions : -640 0 0 0 0 0 640
AF Points In Focus : (none)
AF Points Selected : 0,1,2,3,4,5,6
Original Decision Data Offset : 0
Bracket Mode : Off
Bracket Value : 0
Bracket Shot Number : 0
Raw Jpg Size : Large
Long Exposure Noise Reduction 2 : Off
WB Bracket Mode : Off
WB Bracket Value AB : 0
WB Bracket Value GM : 0
Live View Shooting : Off
Lens Model : EF-S18-55mm f/3.5-5.6 IS
Internal Serial Number : xxxxxxx3UU
Dust Removal Data : (Binary data 1024 bytes, use -b option to extract)
Exposure Level Increments : 1/3 Stop
Flash Sync Speed Av : Auto
Long Exposure Noise Reduction : Off
High ISO Noise Reduction : Off
Auto Lighting Optimizer : Enable
AF Assist Beam : Emits
AF During Live View : Disable
Mirror Lockup : Disable
Shutter-AE Lock : AF/AE lock
Set Button When Shooting : LCD monitor On/Off
LCD Display At Power On : Display
Add Original Decision Data : Off
Tone Curve : Standard
Sharpness : 0
Sharpness Frequency : n/a
Sensor Red Level : 0
Sensor Blue Level : 0
White Balance Red : 0
White Balance Blue : 0
Color Temperature : 5200
Picture Style : Faithful
Digital Gain : 0
WB Shift AB : 0
WB Shift GM : 0
Measured RGGB : 1174 1024 1024 298
VRD Offset : 0
Sensor Width : 3948
Sensor Height : 2622
Sensor Left Border : 52
Sensor Top Border : 23
Sensor Right Border : 3939
Sensor Bottom Border : 2614
Black Mask Left Border : 0
Black Mask Top Border : 0
Black Mask Right Border : 0
Black Mask Bottom Border : 0
Color Data Version : 5 (450D/1000D)
WB RGGB Levels As Shot : 2491 1024 1024 1558
Color Temp As Shot : 5781
WB RGGB Levels Auto : 2491 1024 1024 1558
Color Temp Auto : 5781
WB RGGB Levels Measured : 2488 1021 1026 1559
Color Temp Measured : 5781
WB RGGB Levels Daylight : 2162 1024 1024 1586
Color Temp Daylight : 5200
WB RGGB Levels Shade : 2551 1024 1024 1311
Color Temp Shade : 7000
WB RGGB Levels Cloudy : 2351 1024 1024 1429
Color Temp Cloudy : 6000
WB RGGB Levels Tungsten : 1608 1137 1137 2786
Color Temp Tungsten : 3200
WB RGGB Levels Fluorescent : 1856 1024 1024 2222
Color Temp Fluorescent : 3864
WB RGGB Levels Kelvin : 2162 1024 1024 1586
Color Temp Kelvin : 5200
WB RGGB Levels Flash : 2405 1024 1024 1423
Color Temp Flash : 6142
Raw Measured RGGB : 50562 43856 45217 12556
User Comment :
Sub Sec Time : 23
Sub Sec Time Original : 23
Sub Sec Time Digitized : 23
Flashpix Version : 0100
Color Space : sRGB
Exif Image Width : 3888
Exif Image Height : 2592
Interoperability Index : R98 - DCF basic file (sRGB)
Interoperability Version : 0100
Focal Plane X Resolution : 4438.356164
Focal Plane Y Resolution : 4445.969125
Focal Plane Resolution Unit : inches
Custom Rendered : Normal
Exposure Mode : Auto
Scene Capture Type : Standard
Thumbnail Offset : 38124
Thumbnail Length : 4689
Photometric Interpretation : RGB
Samples Per Pixel : 3
Rows Per Strip : 324
Planar Configuration : Chunky
Strip Offsets : 1343652
Strip Byte Counts : 8949054
Raw Image Segmentation : 1 1964 1984
Aperture : 5.0
Drive Mode : Single-frame shooting
File Number : 100-0452
Image Size : 3888x2592
Lens : 18.0 - 55.0 mm
Lens ID : Canon EF-S 18-55mm f/3.5-5.6 IS
Preview Image : (Binary data 356052 bytes, use -b option to extract)
Scale Factor To 35 mm Equivalent: 1.6
Shooting Mode : Aperture-priority AE
Shutter Speed : 1/50
Create Date : 2011:02:10 00:34:31.23
Date/Time Original : 2011:02:10 00:34:31.23
Modify Date : 2011:02:10 00:34:31.23
Thumbnail Image : (Binary data 4689 bytes, use -b option to extract)
WB RGGB Levels : 2491 1024 1024 1558
Blue Balance : 1.521484
Circle Of Confusion : 0.019 mm
Field Of View : 40.7 deg
Focal Length : 30.0 mm (35 mm equivalent: 48.6 mm)
Hyperfocal Distance : 9.70 m
Lens : 18.0 - 55.0 mm (35 mm equivalent: 29.1 - 89.0 mm)
Light Value : 7.3
Red Balance : 2.432617
Maybe you are looking for
-
How to disable copy and paste from Mail to other applications
Are there MDM or policy that can limit copy and paste? Using MDM or ACU to lockdown the phone would be completely useless in regards to preventing data leakage unless copy/paste can be controlled. MDM provider is advising that there is no API from
-
Transfer iTunes and Outlook data to a new PC
I'm successfully logged into Homeshare with my old computer and I've tried the methods listed here, but can't get to the "import" button that is supposed to import selected items. Is there an easy way to just take my data (Music and Outlook data incl
-
Ethernet cable for macbook pro
i would like to inquire what type of ethermet cable owuld I use for my mac book pro 13.3 inch
-
i got a replacement mini from apple 2 days ago and it is very frustrating. it took many many attempts to get it to even upload songs and now that there are songs on it, it wont turn on. It is fully charged, i have tried resetting it, i have tried to
-
Install officejet 8600 on mac 10.9.2
My printer was working fine and all of a sudden it stopped printing. I tried everything and finally decided to reset to factory and delete from my Mac Mini and add it back but now I can't even find the printer. I also tried to connect by using the IP