Converting INVOIC02 idoc to EDIFACT INVOIC message (Using Adapter Module

Hi Friends,
We are sending customer idoc (INVOIC02) from R/3 to external system through PI. We want to generate EDIFACT output file (message type : INVOIC).
Is it possible to convert IDoc message to EDI file format through java adapter module ? Will adapter module support this without using Seeburger adapter ?
kindly clarify, friends.
Kind regards,
Jegathees P.

There is an alternative to Seeburger.
DataDirect also has complete EDI-XML conversion by way of deploying a module which is called from an adapter. The range of parameters with the conversion is also quite extensive, allowing tolerance for partners who may have included non-standard EDI qualifiers and such. The XML tags make for easier mapping. StylusStudio XML Suite includes the EDI<->XML adapter so you can try the conversions each way directly in that package. If you are happy with it, you need to then purchase the package from DataDirect. We did this and implemented EDI for X12 and EDIfact, including Orders and Invoices and some other messages. The communications part was not included. We wrote the EDI files and used a separate process to actually send and receive the files. The IDoc <-> EDI mapping was done using the normal graphical mapping of SAP PI. The Stylus Studio package includes the functionality to generate the XSD, which we imported to SAP PI.

Similar Messages

Is it possible to send error message from Adapter Module to CCMS?

Hi
Is it possible to send error message from Adapter Module to CCMS...?I have written on adatper module from there i have to send error message to CCMS or SXMB_MONI. Is it possible if yes please send me the related documents
Best Regards
Ravi Shankar B

Hi
I have written following User Defined Exeption in my Module program
class DuplicateFileException extends ModuleException{
          DuplicateFileException(String message){
               super(message);
I am throwing my Exception like this
try{
     throw new DuplicateFileException("Duplicate File");
}catch(DuplicateFileException e){
     throw e;
But i am not getting this exception in SXMB_MONI. In adpater monitoring i am getting the following exceptions
<b>
2007-05-16 15:51:30 GMT+05:30: Retry interval started. Length: 5.000 s
- 2007-05-16 15:51:30 GMT+05:30: Error: java.lang.NullPointerException
- 2007-05-16 15:51:30 GMT+05:30: An unknown error occured.
- 2007-05-16 15:51:30 GMT+05:30: Processing started
- 2007-05-16 15:51:25 GMT+05:30: Error: java.lang.NullPointerException</b>
can any one give me the idea how to send error from module program to SXMB_MONI
Thanks & Regards
Ravi Shankar B

Convertion an inventory to other inventory without use Production module

We are going to register all tarnsaction about converting A product to B product but we dont want to use production module(BOM and Prodcution report) .
how should we manage this process in SAP by consider the inventory and Financial principles?

No , I want to have all transaction about these items, I want to issue A item and then receive B item from mayeb virtual warehouse, Because I want to know the consumption of Item A and also the quantity and Cost of Item B, the Cost of B will be calculate manually but I want to recorde all data about Item A and B

Creating a new message in adapter module

Hello,
I already posted the question in this [Thread|Sending Adapter Module to split messages;, but I now create this new topic so you can get points for your answer
Jan from this thread wrote "I know how to send a new message using a new instance of the Module Processor and using ModuleProcessor.process()" and I'm now searching for a code example how to create a new message from within an adapter module. I think it must be something like [this|http://help.sap.com/saphelp_srm40/helpdata/en/8d/6ad6409ff68631e10000000a1550b0/frameset.htm].
Regards
Markus

Hi Sippy,
First of all we need to configure the systems. So that we can transfer data from Outbound system to Inbound system.
Configure an Outbound Process that uses Message Control
Step 1: Create a new Message Type
TCode: We 81
Path: From the Area menu of EDI, choose Development, IDOC Type/ Message
Step 2: link the IDOC type to the Message Type
TCode: We 82
Path: From the Area menu of EDI, choose Development, IDOC Type/ Message
Step 3: Create a new Process Code
TCode: We 41
Path: From the Area menu of EDI, choose Control,Outbound Process COde
Step 4: Create or Change a Partner Profile
TCode: We 41
Path: From the Area menu of EDI, choose IDOC,Partner Profile
Configure an Outbound Process for Stand-Alone Programs.
1. Create a new message type
2. Link the IDOC type to the Message Type
3. Add the message to the ALE Distribution Model(use BD 64)
4. Create or change the Partner Profile
I think this will be helpful for you.
Reward points if useful.
Cheers,
Swamy Kunche

Create multiple messages in adapter module

Hi!
I've the problem to solve the following scenario: Mail (1) -> XI -> IDocs (1..n)
Since for IDocs message split is not supported and I don't want to use a BPM, is it possible to create different xi-messages in an adapter module which processes the mail?
Therefore I want to make the message split directly on the source: the adapter module.
Best regards,
Daniel

Daniel,
There is no need for a BPM and for an Adapter Module split.
1. Create an XSD out of your IDOC strcuutre and change the occurence of the IDOC element to 0 to unbounded.
2. Import this XSD and use this in your Message Mapping as the target Message Type. For every IDOC to be created in your Target , you will need to create an IDOC tag in the mapping. Each IDOC tag indiactes one IDOC.
3. In your Interface Mapping, DO NOT CREATE a separate Interface for the IDOC, but use the IDOC itself as the Message Interface and select the mapping with the XSD as the target.
Configuration will be as usual.
Regards,
Bhavesh

Issue with overwriting msg using adapter module when WSS enabled in SOAP CC

Hi guys,
I have a SOAP->RFC scenario where on the sender side I'm using an adapter module. This adapter module should modify the message content based on some conditions. This works fine unless the WSS is enabled in the sender SOAP CC. When enabled, the message doesn't get modified. If disabled, it works fine. Do you have any explanation for this? Is there any workaround for this?
Thanks, Olian

Hi Olian,
For 2004s (PI71) too sender adapter doesn't support modules (in normal SOAP mode and not in AXIS)
http://help.sap.com/saphelp_nwpi71/helpdata/EN/a4/f13341771b4c0de10000000a1550b0/frameset.htm
>>if I use the module w/o WSS enabled on the CC,
Can you tell me how you did this??
Regards
Suraj

Covnert Complex XML to Simple XML tags using Adapter Module

Hi
<buyer>
<fnParty:partyIdentifier partyIdentifier="GER" partyIdentifierQualifierCode="SenderAssigned"/>
</buyer>
I want to convert above complex xml into following simple xml document
<buyer>GER</buyer>
I am writing adapter module. Could any one please tell me how to convert this
Regards
Sowmya

Hi,
Is partyidentifier is source xml and buyer in target xml?
You can map the attribute to buyer element in message mapping itself.
Why do you want adapter module?
Thanks,
Beena.

Cancel Message in Adapter Module

Hi,
I want to set the Status of a message to Canceled from within an Adapter Module. Is this possible?
The problem I have is with a Mail receiver sending messages with blank attachments. I want the adapter module to check if the attachment is empty, then set the status of the message to cancelled.
If this isn't possible is there a way of cancelling the message at an earlier stage? I know the File adapter has an option to not create empty files but the mail adapter doesn't.
Thanks,
Gareth

Hi Gareth O´Brien,
I understand your requirement as, when mail attachment is empty, it should not be sent to mail recepients.
As far as I know, there is not standard way to do it. You can develop a Java Mapping or Adapter module and raise an error if attachemnt is empty (we cannot set message to canceled state), mail will not be sent with empty attachment.
Java Mapping is easy to develop and maintian than Adapter Module. Java Mapping API Link1
Regards,
Raghu_Vamsee

Audit message in adapter module

hi all
I have developed a adapter module, in which I write some audit message. If the message is processed successfully, then I can see the audit message in RWB. But when some errors happen and some exceptions are thrown, I cannot see any audit message in RWB, what's more , I even cannot find the message in the adapter message monitoring. That means the message is lost. The only informaiton I can get is from the communication channel monitoring:
<i>exception caught during processing mail message [4]com.sap.aii.af.mp.processor.ModuleProcessorException: Error during processing local bean: localejbs/PgpMsg caused by: com.sap.engine.services.ejb.exceptions.BaseEJBException: Exception in method process.</i>
the SP level of XI is 18.
Any idea?
Thanks!
Regards,
Hui

Hi Rajeev,
That's what I do. My catch statement is as follow:
catch(Exception e) {
Audit.addAuditLogEntry(
                    amk,
                    AuditLogStatus.ERROR,
                     "Error while message processing----"
                    + e.getMessage());
throw new ModuleException(e);
I except that when an Exception is caught, it writes a audit log and throw a ModuleException. The message should be in error state and be resent several times automatically. But the current situation is: I cannot find the message in adapter message monitoring and the whole message is lost. The only information I can get is from the communication channel monitoring.

INVOIC02 IDOC for vendor invoice

hi friends..
can we post invoice for vendor in F-02 using this IDOC for posting key 31...
plz help..

Hi Sharadha,
Good morning and greetings,
Please go through the following SAP OSS Note
Note 195538 - INVOIC02: user exit/additional account assignment
If found useful please reward points
Thanking you
With kindest regards
Ramesh Padmanabhan

Seeburger IDOC-to-File scenario: Error using Classifier module

Hello,
I am running the following scenario: ORDERS.ORDERS05 IDOC -> XI -> X12 850 4010 File.
In the file receiver channel, I am using Seeburger's Classifier and BIC modules as follows:
localejbs/SeeClassifier        classifier
localejbs/CallBicXIRaBean      bic
CallSapAdapter                 0
classifier   attID             classifierAtt
classifier   destSourceMsg     MainDocument
classifier   showInAuditLog    true
bic          classifierAttID   classifierAtt
bic          destEncoding      UTF8
bic          destSourceMsg     MainDocument
bic          destTargetMsg     MainDocument
bic          mappingName       AUTO
bic          newLine           true
bic          srcEncoding       UTF8
After conversion in XI, the file fails to write to the folder because of this error:
Message processing failed. Cause: javax.resource.ResourceException: ---
Conversion of synchronous request from module chain ended with errors
---Error: [Error:ID=1010;LEVEL=1] BICMapping runMapping() The mapping:
See_XML_AnsiX12 you are trying to load cannot be found in the classpath!
Maybe you forgot to compile or to activate the mapping! DESCRIPTION:
BICMapping Error: The mapping [not specified] you are trying to load cannot
be found in the right path! Maybe you forgot to compile or to activate the
mapping!
When I set the mapping directly to See_X2E_AnsiX12_850_V4010 instead of using the Classifier module, the configuration works fine. But I want to design the receiver channel to be able to receive all types of EDI messages coming from XI.
I am only facing this problem for the IDOC-to-File scenario. Somehow the same configuration works for a File-to-IDOC scenario.
I talked to our Basis team and they said that the map See_XML_AnsiX12 does not exist in Seeburger's delivered content, although I believe that it should be. Has anyone encountered this problem before?
Any suggestions would be appreciated.
Thanks,
Arianne

Hi Yomesh,
Here is the payload.
<?xml version="1.0" encoding="UTF-8"?>
<LIST>
<S_ISA>
    <D_I01>00</D_I01>
    <D_I02/>
    <D_I03>00</D_I03>
    <D_I04/>
    <D_I05>ZZ</D_I05>
    <D_I06>CELORGS01</D_I06>
    <D_I05_2>ZZ</D_I05_2>
    <D_I07>AVX</D_I07>
    <D_I08>032008</D_I08>
    <D_I09>1718</D_I09>
    <D_I10>X</D_I10>
    <D_I11>00401</D_I11>
    <D_I12>000000008</D_I12>
    <D_I13>0</D_I13>
    <D_I14>T</D_I14>
    <D_I15>^</D_I15>
    <S_GS>
      <D_479>PO</D_479>
      <D_142>CLS01</D_142>
      <D_124>058895921</D_124>
      <D_373>20080320</D_373>
      <D_337>1718</D_337>
      <D_28>8</D_28>
      <D_455>X</D_455>
      <D_480>004010</D_480>
      <S_ST>
        <D_143>850</D_143>
        <D_329>800001</D_329>
        <S_BEG>
          <D_353>00</D_353>
          <D_92>SA</D_92>
          <D_324>4500005037</D_324>
          <D_373>20051110</D_373>
        </S_BEG>
        <S_CUR>
          <D_98>BY</D_98>
          <D_100>USD</D_100>
        </S_CUR>
        <S_FOB>
          <D_146>CC</D_146>
          <D_309>OR</D_309>
          <D_352>FREE CARRIER</D_352>
          <D_334>02</D_334>
          <D_335>FOB</D_335>
          <D_309_2>DE</D_309_2>
        </S_FOB>
        <S_ITD>
          <D_336>01</D_336>
          <D_333>3</D_333>
          <D_351>45</D_351>
        </S_ITD>
        <G_SN9>
          <S_N9>
            <D_128>L1</D_128>
            <D_369>GEN</D_369>
            <S_MSG>
              <D_933>TEST</D_933>
            </S_MSG>
            <S_MSG>
              <D_933>MESSAGE</D_933>
            </S_MSG>
          </S_N9>
        </G_SN9>
        <G_SN1>
          <S_N1>
            <D_98>BY</D_98>
            <D_66>92</D_66>
            <D_67>6310</D_67>
            <S_PER>
              <D_366>BD</D_366>
              <D_93>Graham Crawford</D_93>
            </S_PER>
          </S_N1>
        </G_SN1>
        <G_SN1>
          <S_N1>
            <D_98>BT</D_98>
            <D_66>92</D_66>
            <D_67>6310</D_67>
          </S_N1>
        </G_SN1>
        <G_SN1>
          <S_N1>
            <D_98>SE</D_98>
            <D_93>3M COMPANY</D_93>
            <D_66>92</D_66>
            <D_67>0000019591</D_67>
          </S_N1>
        </G_SN1>
        <G_SN1>
          <S_N1>
            <D_98>ST</D_98>
            <D_93>SAMPLE</D_93>
            <D_66>92</D_66>
            <D_67>6310</D_67>
          </S_N1>
        </G_SN1>
        <G_SPO1>
          <S_PO1>
            <D_350>00010</D_350>
            <D_330>10.000</D_330>
            <D_355>EA</D_355>
            <D_212>10</D_212>
            <D_639>PE</D_639>
            <D_235>BP</D_235>
            <D_234>230-1812-01JDS</D_234>
            <D_235_2>EC</D_235_2>
            <D_234_2>A00000000000002</D_234_2>
            <G_SPID>
              <S_PID>
                <D_349>F</D_349>
                <D_352>TIE WRAP,LOCKING,PANDUIT-PLASTIC PART C</D_352>
              </S_PID>
            </G_SPID>
            <S_REF>
              <D_128>CO</D_128>
              <D_127>4500005037-00010</D_127>
            </S_REF>
            <G_SSCH>
              <S_SCH>
                <D_380>10.000</D_380>
                <D_355>EA</D_355>
                <D_374>002</D_374>
                <D_373>20051208</D_373>
              </S_SCH>
            </G_SSCH>
          </S_PO1>
        </G_SPO1>
        <G_SCTT>
          <S_CTT>
            <D_354>1</D_354>
          </S_CTT>
        </G_SCTT>
        <S_SE>
          <D_96/>
          <D_329>800001</D_329>
        </S_SE>
      </S_ST>
      <S_GE>
        <D_97>1</D_97>
        <D_28>8</D_28>
      </S_GE>
    </S_GS>
    <S_IEA>
      <D_I16>1</D_I16>
      <D_I12>000000008</D_I12>
    </S_IEA>
</S_ISA>
</LIST>
Thanks,
Arianne

Outbound IDOC for sales order: message type, function module ?

Hi all,
is there a possibility to send out sales order data with an outbound IDOC (like sending an purchase order out with ORDERS.ORDERS05)
I've looked in WE20, for application V1 there are process codes like SD01, SD04, ... but the function modules behind are no existing on our system (release 500)
can anybody give me an little hint?
Thank you very much
best regards Hans

Hi George,
for every process code there is a function module attached you can see in WE41(t-code)..
double click on the Process code you will able to see the Function Module attached to Process code..
and also you can check it out in WE57 (t-code) link between the Function module and Message type and Idoc type..
Process code      SD01
Description       ORDRSP: Order acknowledgment, ORD_ID01 (SD_ORDRSP)
Function module   SD_EDI_ORDRSP_ORD_ID01
Process code      SD04
Description       DESADV: Shipping notif. with DES_ID01 (SD_DESADV)
Function module   SD_EDI_DESADV_DES_ID01
regards,
Prabhudas

Duplicate File Handling using Adapter Module

Hi All
The Scenario is like this------
XI is picking a files from FTP location.
Duplicate files are also getting picked by XI.
To handle this i have written a module which is finding it out wheather the file is duplicate or not. If the file is not duplicate then it is getting processed.
Now the problem i am facing is -
I dont want to process the file if it is found duplicate, then what code i should write.
What are the ways i can stop the processing of duplicate file.
Regards
Dheeraj Kumar

Hi
I have implemented a module in which i can find out wheather the file is duplicate or not. If the file is not duplicate process the file.
now the problem is --- if file is duplicate then i dont want to process the file.
How can i achieve this?
Regards
Dheeraj Kumar
Edited by: Dheeraj Kumar on Nov 30, 2009 3:21 PM

Send custom error message using IDoc conversion rule?

Hello,
I am using an Idoc conversion rule in BD79 to load cost centers. In my conversion rule I use a conversion exit function module to concatenate 2 specific characters and sending cost center value together and then this output value placed in the receiving cost center field. This works fine, but now I want to send a custom error message to the idoc and fail the idoc if the sending cost center value is greater than 8 digits.
Does anyone know how to send an error message or update an idoc with an error message using a conversion rule (bd79)?
Thank you,
Rhonda

Hi Rhonda,
Any luck on the below.. i have a similar issue...
Sorry to hijack your thread...

Adapter Module to convert text message to XML

Hello Experts,
I am writing a custom adapter module to convert the text content to XML message at the sender adapter end.
I have followed the steps mentioned in the "HowToCreateModulesforJ2EEAdapterEngine" guide available on SDN.
I have created the java logic in the process mesthod of the bean to conver the text message to XML paylod (don't know if it is correct). I do not have much idea about the Adpater API methods.
Can anybody help me with the logic to convert the text msg to xml paylod using adapter frame work APIs or is there any way I can debug and test my logic in NWDS.
Any help will be greatly appreciated.
- Rajan

Hi ,
To convert Text message to XML why yiu want to go for Adapter Module?? Using file content conversion it self you can do it right?????
There is no standard logic to convert text file to XML, the logic purely depends on your text message format.
Regards,
Raj

Converting INVOIC02 idoc to EDIFACT INVOIC message (Using Adapter Module

Similar Messages

Maybe you are looking for