CQWP does not return result for a specific query when filtering on a managed metadata field.

Hi,
We are facing a serious production issue. We've search the web extensively but to no avail.
Problem:
CQWP does not return result for a specific query when filtering on a managed metadata field.
ULS log:
The Uls logs provides 3 different messages that I could relate to every time the query is executed. The last item(level Medium) is displayed 14 times. For readability I've moved the ULS logs to the bottom of this question.
Query:
The query is as follows:
(I've translated this from dutch so pardon any typo's)
Query: (top selection) Display items from all sites in the site collection
ListType: Documentlibrary
Contenttype:
Items from this group:Custom Document Contenttypes
Items from this content type: Verklaring
Filter: Soort is equal to X
extra info: the field soort (Type) is a managed metadata field that was assigned the value X
Managed Metadata Structure:
-managed metadata service
  -Contoso
    -Enterprise Taxonomy (term set)
      -Document (term)
        -Verklaring (term)
          -Soort (term)
            -x (term)
EXTRA INFO:
When I modify the filter to filter on Title the CQWP DOES return the correct document!
When I modify the query settings to search a specific library the CWQP also does return the correct document! (In this case I am filtering on a managed metadata field).
QUESTION:
Why doesn't the CQWP return the document when filtering on a managed metadata field over the entire site collection.
Why does the CQWP return the document when filtering on a managed metadata field over a single library.
(The type of information the CQWP should return (Soort:x) is stored in a dozen document libraries!)
Here are the ULS logs.
Product: Web Content Management
Category Publishing
Level: Monitorable:
CrossListQueryCache::GetSiteData() caught exception (Microsoft.SharePoint.SPException: Kan deze actie niet voltooien.  Probeer het opnieuw. ---> System.Runtime.InteropServices.COMException (0x80004005): Kan deze actie niet voltooien.  Probeer
het opnieuw.     bij Microsoft.SharePoint.Library.SPRequestInternalClass.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter pCallback, Object& pvarColumns)    
bij Microsoft.SharePoint.Library.SPRequest.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter pCallback, Object& pvarColumns)     --- Einde van intern uitzonderingsstackpad
---     bij Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)     bij Microsoft.SharePoint.Library.SPRequest.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery,
ISP2DSafeArrayWriter pCallback, Object& pvarColumns)     bij Microsoft.SharePoint.SPWeb.GetSiteData(SPSiteDataQuery query)     bij Microsoft.SharePoint.Publishing.CachedArea.GetSiteData(SPWeb web, SPSiteDataQuery
siteDataQuery, Boolean useSpQueryOnList)     bij Microsoft.SharePoint.Publishing.CachedArea.GetCrossListQueryResults(SPSiteDataQuery query, SPWeb currentContext, Boolean onlyPopulateCache, Boolean useSpQueryOnList, Int32 lcid)    
bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(CachedArea cachedArea, SPWeb web, SPSiteDataQuery query, Boolean useSpQueryOnList)) for query:  '<ViewFields><FieldRef ID="{fa564e0f-0c70-4ab9-b863-0177e6ddd247}"
Nullable="True" Type="Text"/><FieldRef ID="{94f89715-e097-4e8b-ba79-ea02aa8b7adb}" Nullable="True" Type="Lookup"/><FieldRef ID="{1d22ea11-1e32-424e-89ab-9fedbadb6ce1}" Nullable="True"
Type="Counter"/><FieldRef ID="{28cf69c5-fa48-462a-b5cd-27b6f9d2bd5f}" Nullable="True" Type="DateTime"/><FieldRef ID="{1df5e554-ec7e-46a6-901d-d85a3881cb18}" Nullable="True" Type="User"/><FieldRef
ID="{d31655d1-1d5b-4511-95a1-7a09e9b75bf2}" Nullable="True" Type="User"/><FieldRef ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True" Type="DateTime"/><FieldRef ID="{30bb605f-5bae-48fe-b4e3-1f81d9772af9}"
Nullable="True" Type="Lookup"/><FieldRef ID="{ba3c27ee-4791-4867-8821-ff99000bac98}" Nullable="True" Type="Text"/><FieldRef ID="{c5c4b81c-f1d9-4b43-a6a2-090df32ebb68}" Nullable="True"
Type="Lookup"/><FieldRef ID="{8fca95c0-9b7d-456f-8dae-b41ee2728b85}" Nullable="True" Type="Lookup"/><FieldRef ID="{39360f11-34cf-4356-9945-25c44e68dade}" Nullable="True" Type="Text"/><FieldRef
ID="{543bc2cf-1f30-488e-8f25-6fe3b689d9ac}" Nullable="True" Type="Image"/><FieldRef ID="{43bdd51b-3c5b-4e78-90a8-fb2087f71e70}" Nullable="True" Type="Number"/><FieldRef ID="{9da97a8a-1da5-4a77-98d3-4bc10456e700}"
Nullable="True" Type="Note"/><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}" Nullable="True" Type="Lookup"/><FieldRef Name="ScopeId" /><FieldRef Name="_Level" /><FieldRef
Name="UniqueId" /><ListProperty Name="DraftVersionVisibility" /></ViewFields><Lists ServerTemplate="101"></Lists><Webs Scope="Recursive" /><RowLimit>45</RowLimit><Query><Where><And><BeginsWith><FieldRef
Name="ContentTypeId" Nullable="True" Type="ContentTypeId"/><Value Type="ContentTypeId">0x010100C5FEE83B67FA6445B0C14AE8B7761BB8011E</Value></BeginsWith><In><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}"
LookupId="TRUE"/><Values><Value Type="Counter">783</Value></Values></In></And></Where><OrderBy><FieldRef ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True"
Type="DateTime" Ascending="FALSE"/></OrderBy></Query>' at url: /. Titel webonderdeel: Inhoudsquery
Product: Web Content Management
Category Publishing
Level: Warning
Error occured while processing a Content Query Web Part. Performing the following query '<ViewFields><FieldRef ID="{fa564e0f-0c70-4ab9-b863-0177e6ddd247}" Nullable="True" Type="Text"/><FieldRef ID="{94f89715-e097-4e8b-ba79-ea02aa8b7adb}"
Nullable="True" Type="Lookup"/><FieldRef ID="{1d22ea11-1e32-424e-89ab-9fedbadb6ce1}" Nullable="True" Type="Counter"/><FieldRef ID="{28cf69c5-fa48-462a-b5cd-27b6f9d2bd5f}" Nullable="True"
Type="DateTime"/><FieldRef ID="{1df5e554-ec7e-46a6-901d-d85a3881cb18}" Nullable="True" Type="User"/><FieldRef ID="{d31655d1-1d5b-4511-95a1-7a09e9b75bf2}" Nullable="True" Type="User"/><FieldRef
ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True" Type="DateTime"/><FieldRef ID="{30bb605f-5bae-48fe-b4e3-1f81d9772af9}" Nullable="True" Type="Lookup"/><FieldRef ID="{ba3c27ee-4791-4867-8821-ff99000bac98}"
Nullable="True" Type="Text"/><FieldRef ID="{c5c4b81c-f1d9-4b43-a6a2-090df32ebb68}" Nullable="True" Type="Lookup"/><FieldRef ID="{8fca95c0-9b7d-456f-8dae-b41ee2728b85}" Nullable="True"
Type="Lookup"/><FieldRef ID="{39360f11-34cf-4356-9945-25c44e68dade}" Nullable="True" Type="Text"/><FieldRef ID="{543bc2cf-1f30-488e-8f25-6fe3b689d9ac}" Nullable="True" Type="Image"/><FieldRef
ID="{43bdd51b-3c5b-4e78-90a8-fb2087f71e70}" Nullable="True" Type="Number"/><FieldRef ID="{9da97a8a-1da5-4a77-98d3-4bc10456e700}" Nullable="True" Type="Note"/><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}"
Nullable="True" Type="Lookup"/><FieldRef Name="ScopeId" /><FieldRef Name="_Level" /><FieldRef Name="UniqueId" /><ListProperty Name="DraftVersionVisibility" /></ViewFields><Lists
ServerTemplate="101"></Lists><Webs Scope="Recursive" /><RowLimit>45</RowLimit><Query><Where><And><BeginsWith><FieldRef Name="ContentTypeId" Nullable="True" Type="ContentTypeId"/><Value
Type="ContentTypeId">0x010100C5FEE83B67FA6445B0C14AE8B7761BB8011E</Value></BeginsWith><In><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}" LookupId="TRUE"/><Values><Value Type="Counter">783</Value></Values></In></And></Where><OrderBy><FieldRef
ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True" Type="DateTime" Ascending="FALSE"/></OrderBy></Query>' generated the following error: Kan deze actie niet voltooien.  Probeer het opnieuw.
at the following url: /. Titel webonderdeel: Inhoudsquery
Kan deze actie niet voltooien. Probeer het opnieuw. This is Dutch. It means something like: Cannot complete this action. Please try again.
Product: Web Content Management
Category Publishing
Level: Medium (this message is displayed 14 times)
ConsoleUtilies.GetContextualControlMode had no currentPage so the current SPWebPartManager mode cannot be retrieved.

Hi,
while digging through the logging (again) I found some extra logging regarding the same correlation id (see details below).
We have a fairly large term store (4000+ lines).
If somebody has a clue or tip that would greatly appreciated!
03-19-2014 13:49:51.87 w3wp.exe (0x2098) 0x23BC SharePoint Foundation Database fa42 Monitorable A large block of literal text was sent to sql.  This can result in blocking in sql and excessive memory use on the front
end.  Verify that no binary parameters are being passed as literals, and consider breaking up batches into smaller components.  If this request is for a SharePoint list or list item, you may be able to resolve this by reducing the number of fields. 1971313a-6baa-49e9-bace-d024ce67f25c
03-19-2014 13:49:51.87 w3wp.exe (0x2098) 0x23BC SharePoint Foundation Database fa43 High Slow Query Duration: 127.1515 1971313a-6baa-49e9-bace-d024ce67f25c
03-19-2014 13:49:51.87 w3wp.exe (0x2098) 0x23BC SharePoint Foundation Database fa44 High Slow Query StackTrace-Managed:    bij Microsoft.SharePoint.Utilities.SqlSession.OnPostExecuteCommand(SqlCommand command,
SqlQueryData monitoringData)     bij Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQueryData monitoringData, Boolean retryForDeadLock)     bij Microsoft.SharePoint.SPSqlClient.ExecuteQueryInternal(Boolean
retryfordeadlock)     bij Microsoft.SharePoint.SPSqlClient.ExecuteQuery(Boolean retryfordeadlock)     bij Microsoft.SharePoint.Library.SPRequestInternalClass.CrossListQuery(String bstrUrl, String bstrXmlWebs, String
bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter pCallback, Object& pvarColumns)     bij Microsoft.SharePoint.Library.SPRequest.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter
pCallback, Object& pvarColumns)     bij Microsoft.SharePoint.SPWeb.GetSiteData(SPSiteDataQuery query)     bij Microsoft.SharePoint.Publishing.CachedArea.GetSiteData(SPWeb web, SPSiteDataQuery siteDataQuery, Boolean
useSpQueryOnList)     bij Microsoft.SharePoint.Publishing.CachedArea.GetCrossListQueryResults(SPSiteDataQuery query, SPWeb currentContext, Boolean onlyPopulateCache, Boolean useSpQueryOnList, Int32 lcid)     bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(CachedArea
cachedArea, SPWeb web, SPSiteDataQuery query, Boolean useSpQueryOnList)     bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(CachedArea ca, Boolean useSpQueryOnList)     bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(SPSite
site, String webUrl, Boolean useSpQueryOnList)     bij Microsoft.SharePoint.Publishing.WebControls.ContentByQueryWebPart.IssueQuery()     bij Microsoft.SharePoint.Publishing.WebControls.ContentByQueryWebPart.GetXPathNavigator(String
viewPath)     bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform)     bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.PerformSelect()    
bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.DataBind()     bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.EnsureDataBound()     bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.CreateChildControls()    
bij System.Web.UI.Control.EnsureChildControls()     bij System.Web.UI.Control.PreRenderRecursiveInternal()     bij System.Web.UI.Control.PreRenderRecursiveInternal()     bij System.Web.UI.Control.PreRenderRecursiveInternal()    
bij System.Web.UI.Control.PreRenderRecursiveInternal()     bij System.Web.UI.Control.PreRenderRecursiveInternal()     bij System.Web.UI.Control.PreRenderRecursiveInternal()     bij System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     bij System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     bij System.Web.UI.Page.ProcessRequest()    
bij System.Web.UI.Page.ProcessRequest(HttpContext context)     bij ASP.BLANKWEBPARTPAGE_ASPX_1653093133.ProcessRequest(HttpContext context)     bij Microsoft.SharePoint.Publishing.TemplateRedirectionPage.ProcessRequest(HttpContext
context)     bij System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     bij System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)    
bij System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)     bij System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)     bij System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest
wr, HttpContext context)     bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr
managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32
flags)     bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) 1971313a-6baa-49e9-bace-d024ce67f25c

Similar Messages

  • Content scope document library does not return result for non farm administrator

    Hi
    I have a situation where I had to go with a unique permission applied subsite to store 1000 documents in the document library. This site has a set of 50 users. I was able to create content scope and library path for search. It returns results for me(creator/owner/administrator)
    however if I add other users as contributor or full permission, even after full crawling it does not return result for others.
    I saw some article that security broken site wont be indexed normal way and to include and I did that as well but no result for other users. I always get result.
    Please suggest if there are any specific security permissions that I need to include, so the document library target search will return result for others.
    Thanks
    Shri

    Hi Shri,
    For administrator search results, it looks like the documents could be crawled and searched.
    For other users you grant full control permission on subsite with unique permission where you store 1000 dcouments in document library, please make sure these 50 users have access permission(at least view permission) on documents from the
    library, then test again.
    Also test if users search on search center site without search scope, see if it's scope issue or search web part issue.
    If above doesn't work, please check ULS log for related useful information around the time when users search the documents, there should be more info to verify if issue is related to unique permision.
    Thanks,
    Daniel Yang
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Query.cmd  -s -c -l "select * from ' cachename '" does not return results

    We are working with coherence 3.6.1 on RH5 server. We are connecting to the grid and are able to query a cache through the command line. However, when we attempt to query a cache utilizing the following command, we receiving only the CohQL prompt:
    query.cmd -s -c -l "select * from '<a cache>'"
    This works on the UNIX side with the query.sh command.
    Additionally:
    redirect to a file = same issue
    input from a file = same issues
    input from a file, redirect to a file = same issue
    etc....
    The examples are OK, it just does not work as expected.
    Thanks!!!

    We have been able to get the file input to file output to work
    query.cmd -s -t -f < myinputfile -f > myoutputfile
    still cannont get the
    query.cmd -l "select * from 'mycache'" to work

  • Pam.conf does not use ldap for password length check when changing passwd

    I have already posted this in the directory server forum but since it is to do with pam not using ldap I thought there might be some pam experts who check this forum.
    I have dsee 6.0 installed on a solaris 10 server (client).
    I have a solaris 9 server (server) set up to use ldap authentication.
    bash-2.05# cat /var/ldap/ldap_client_file
    # Do not edit this file manually; your changes will be lost.Please use ldapclient (1M) instead.
    NS_LDAP_FILE_VERSION= 2.0
    NS_LDAP_SERVERS= X, Y
    NS_LDAP_SEARCH_BASEDN= dc=A,dc= B,dc= C
    NS_LDAP_AUTH= tls:simple
    NS_LDAP_SEARCH_REF= FALSE
    NS_LDAP_SEARCH_SCOPE= one
    NS_LDAP_SEARCH_TIME= 30
    NS_LDAP_SERVER_PREF= X.A.B.C, Y.A.B.C
    NS_LDAP_CACHETTL= 43200
    NS_LDAP_PROFILE= tls_profile
    NS_LDAP_CREDENTIAL_LEVEL= proxy
    NS_LDAP_SERVICE_SEARCH_DESC= passwd:ou=People,dc=A,dc=B,dc=com?one
    NS_LDAP_SERVICE_SEARCH_DESC= group:ou=People,dc=A,dc=B,dc=C?one
    NS_LDAP_SERVICE_SEARCH_DESC= shadow:ou=People,dc=A,dc=B,dc=C?one
    NS_LDAP_BIND_TIME= 10
    bash-2.05# cat /var/ldap/ldap_client_cred
    # Do not edit this file manually; your changes will be lost.Please use ldapclient (1M) instead.
    NS_LDAP_BINDDN= cn=proxyagent,ou=profile,dc=A,dc=B,dc=C
    NS_LDAP_BINDPASSWD= {NS1}6ff7353e346f87a7
    bash-2.05# cat /etc/nsswitch.conf
    # /etc/nsswitch.ldap:
    # An example file that could be copied over to /etc/nsswitch.conf; it
    # uses LDAP in conjunction with files.
    # "hosts:" and "services:" in this file are used only if the
    # /etc/netconfig file has a "-" for nametoaddr_libs of "inet" transports.
    # the following two lines obviate the "+" entry in /etc/passwd and /etc/group.
    passwd: files ldap
    group: files ldap
    # consult /etc "files" only if ldap is down.
    hosts: files dns
    ipnodes: files
    # Uncomment the following line and comment out the above to resolve
    # both IPv4 and IPv6 addresses from the ipnodes databases. Note that
    # IPv4 addresses are searched in all of the ipnodes databases before
    # searching the hosts databases. Before turning this option on, consult
    # the Network Administration Guide for more details on using IPv6.
    #ipnodes: ldap [NOTFOUND=return] files
    networks: files
    protocols: files
    rpc: files
    ethers: files
    netmasks: files
    bootparams: files
    publickey: files
    netgroup: ldap
    automount: files ldap
    aliases: files ldap
    # for efficient getservbyname() avoid ldap
    services: files ldap
    sendmailvars: files
    printers: user files ldap
    auth_attr: files ldap
    prof_attr: files ldap
    project: files ldap
    bash-2.05# cat /etc/pam.conf
    #ident "@(#)pam.conf 1.20 02/01/23 SMI"
    # Copyright 1996-2002 Sun Microsystems, Inc. All rights reserved.
    # Use is subject to license terms.
    # PAM configuration
    # Unless explicitly defined, all services use the modules
    # defined in the "other" section.
    # Modules are defined with relative pathnames, i.e., they are
    # relative to /usr/lib/security/$ISA. Absolute path names, as
    # present in this file in previous releases are still acceptable.
    # Authentication management
    # login service (explicit because of pam_dial_auth)
    login auth requisite pam_authtok_get.so.1 debug
    login auth required pam_dhkeys.so.1 debug
    login auth required pam_dial_auth.so.1 debug
    login auth binding pam_unix_auth.so.1 server_policy debug
    login auth required pam_ldap.so.1 use_first_pass debug
    # rlogin service (explicit because of pam_rhost_auth)
    rlogin auth sufficient pam_rhosts_auth.so.1
    rlogin auth requisite pam_authtok_get.so.1
    rlogin auth required pam_dhkeys.so.1
    rlogin auth binding pam_unix_auth.so.1 server_policy
    rlogin auth required pam_ldap.so.1 use_first_pass
    # rsh service (explicit because of pam_rhost_auth,
    # and pam_unix_auth for meaningful pam_setcred)
    rsh auth sufficient pam_rhosts_auth.so.1
    rsh auth required pam_unix_auth.so.1
    # PPP service (explicit because of pam_dial_auth)
    ppp auth requisite pam_authtok_get.so.1
    ppp auth required pam_dhkeys.so.1
    ppp auth required pam_dial_auth.so.1
    ppp auth binding pam_unix_auth.so.1 server_policy
    ppp auth required pam_ldap.so.1 use_first_pass
    # Default definitions for Authentication management
    # Used when service name is not explicitly mentioned for authenctication
    other auth requisite pam_authtok_get.so.1 debug
    other auth required pam_dhkeys.so.1 debug
    other auth binding pam_unix_auth.so.1 server_policy debug
    other auth required pam_ldap.so.1 use_first_pass debug
    # passwd command (explicit because of a different authentication module)
    passwd auth binding pam_passwd_auth.so.1 server_policy debug
    passwd auth required pam_ldap.so.1 use_first_pass debug
    # cron service (explicit because of non-usage of pam_roles.so.1)
    cron account required pam_projects.so.1
    cron account required pam_unix_account.so.1
    # Default definition for Account management
    # Used when service name is not explicitly mentioned for account management
    other account requisite pam_roles.so.1 debug
    other account required pam_projects.so.1 debug
    other account binding pam_unix_account.so.1 server_policy debug
    other account required pam_ldap.so.1 no_pass debug
    # Default definition for Session management
    # Used when service name is not explicitly mentioned for session management
    other session required pam_unix_session.so.1
    # Default definition for Password management
    # Used when service name is not explicitly mentioned for password management
    other password required pam_dhkeys.so.1 debug
    other password requisite pam_authtok_get.so.1 debug
    other password requisite pam_authtok_check.so.1 debug
    other password required pam_authtok_store.so.1 server_policy debug
    # Support for Kerberos V5 authentication (uncomment to use Kerberos)
    #rlogin auth optional pam_krb5.so.1 try_first_pass
    #login auth optional pam_krb5.so.1 try_first_pass
    #other auth optional pam_krb5.so.1 try_first_pass
    #cron account optional pam_krb5.so.1
    #other account optional pam_krb5.so.1
    #other session optional pam_krb5.so.1
    #other password optional pam_krb5.so.1 try_first_pass
    I can ssh into client with user VV which does not exist locally but exists in the directory server. This is from /var/adm/messages on the ldap client):
    May 17 15:25:07 client sshd[26956]: [ID 634615 auth.debug] pam_authtok_get:pam_sm_authenticate: flags = 0
    May 17 15:25:11 client sshd[26956]: [ID 896952 auth.debug] pam_unix_auth: entering pam_sm_authenticate()
    May 17 15:25:11 client sshd[26956]: [ID 285619 auth.debug] ldap pam_sm_authenticate(sshd VV), flags = 0
    May 17 15:25:11 client sshd[26956]: [ID 509786 auth.debug] roles pam_sm_authenticate, service = sshd user = VV ruser = not set rhost = h.A.B.C
    May 17 15:25:11 client sshd[26956]: [ID 579461 auth.debug] pam_unix_account: entering pam_sm_acct_mgmt()
    May 17 15:25:11 client sshd[26956]: [ID 724664 auth.debug] pam_ldap pam_sm_acct_mgmt: illegal option no_pass
    May 17 15:25:11 client sshd[26956]: [ID 100510 auth.debug] ldap pam_sm_acct_mgmt(VV), flags = 0
    May 17 15:25:11 client sshd[26953]: [ID 800047 auth.info] Accepted keyboard-interactive/pam for VV from 10.115.1.251 port 2703 ssh2
    May 17 15:25:11 client sshd[26953]: [ID 914923 auth.debug] pam_dhkeys: no valid mechs found. Trying AUTH_DES.
    May 17 15:25:11 client sshd[26953]: [ID 499478 auth.debug] pam_dhkeys: get_and_set_seckey: could not get secret key for keytype 192-0
    May 17 15:25:11 client sshd[26953]: [ID 507889 auth.debug] pam_dhkeys: mech key totals:
    May 17 15:25:11 client sshd[26953]: [ID 991756 auth.debug] pam_dhkeys: 0 valid mechanism(s)
    May 17 15:25:11 client sshd[26953]: [ID 898160 auth.debug] pam_dhkeys: 0 secret key(s) retrieved
    May 17 15:25:11 client sshd[26953]: [ID 403608 auth.debug] pam_dhkeys: 0 passwd decrypt successes
    May 17 15:25:11 client sshd[26953]: [ID 327308 auth.debug] pam_dhkeys: 0 secret key(s) set
    May 17 15:25:11 client sshd[26958]: [ID 965073 auth.debug] pam_dhkeys: cred reinit/refresh ignored
    If I try to then change the password with the `passwd` command it does not use the password policy on the directory server but the default defined in /etc/default/passwd
    bash-2.05$ passwd
    passwd: Changing password for VV
    Enter existing login password:
    New Password:
    passwd: Password too short - must be at least 8 characters.
    Please try again
    May 17 15:26:17 client passwd[27014]: [ID 285619 user.debug] ldap pam_sm_authenticate(passwd VV), flags = 0
    May 17 15:26:17 client passwd[27014]: [ID 509786 user.debug] roles pam_sm_authenticate, service = passwd user = VV ruser = not set rhost = not set
    May 17 15:26:17 client passwd[27014]: [ID 579461 user.debug] pam_unix_account: entering pam_sm_acct_mgmt()
    May 17 15:26:17 client passwd[27014]: [ID 724664 user.debug] pam_ldap pam_sm_acct_mgmt: illegal option no_pass
    May 17 15:26:17 client passwd[27014]: [ID 100510 user.debug] ldap pam_sm_acct_mgmt(VV), flags = 80000000
    May 17 15:26:17 client passwd[27014]: [ID 985558 user.debug] pam_dhkeys: entered pam_sm_chauthtok()
    May 17 15:26:17 client passwd[27014]: [ID 988707 user.debug] read_authtok: Copied AUTHTOK to OLDAUTHTOK
    May 17 15:26:20 client passwd[27014]: [ID 558286 user.debug] pam_authtok_check: pam_sm_chauthok called
    May 17 15:26:20 client passwd[27014]: [ID 271931 user.debug] pam_authtok_check: minimum length from /etc/default/passwd: 8
    May 17 15:26:20 client passwd[27014]: [ID 985558 user.debug] pam_dhkeys: entered pam_sm_chauthtok()
    May 17 15:26:20 client passwd[27014]: [ID 417489 user.debug] pam_dhkeys: OLDRPCPASS already set
    I am using the default policy on the directory server which states a minimum password length of 6 characters.
    server:root:LDAP_Master:/var/opt/SUNWdsee/dscc6/dcc/ads/ldif#dsconf get-server-prop -h server -p 389|grep ^pwd-
    pwd-accept-hashed-pwd-enabled : N/A
    pwd-check-enabled : off
    pwd-compat-mode : DS6-mode
    pwd-expire-no-warning-enabled : on
    pwd-expire-warning-delay : 1d
    pwd-failure-count-interval : 10m
    pwd-grace-login-limit : disabled
    pwd-keep-last-auth-time-enabled : off
    pwd-lockout-duration : disabled
    pwd-lockout-enabled : off
    pwd-lockout-repl-priority-enabled : on
    pwd-max-age : disabled
    pwd-max-failure-count : 3
    pwd-max-history-count : disabled
    pwd-min-age : disabled
    pwd-min-length : 6
    pwd-mod-gen-length : 6
    pwd-must-change-enabled : off
    pwd-root-dn-bypass-enabled : off
    pwd-safe-modify-enabled : off
    pwd-storage-scheme : CRYPT
    pwd-strong-check-dictionary-path : /opt/SUNWdsee/ds6/plugins/words-english-big.txt
    pwd-strong-check-enabled : off
    pwd-strong-check-require-charset : lower
    pwd-strong-check-require-charset : upper
    pwd-strong-check-require-charset : digit
    pwd-strong-check-require-charset : special
    pwd-supported-storage-scheme : CRYPT
    pwd-supported-storage-scheme : SHA
    pwd-supported-storage-scheme : SSHA
    pwd-supported-storage-scheme : NS-MTA-MD5
    pwd-supported-storage-scheme : CLEAR
    pwd-user-change-enabled : off
    Whereas /etc/default/passwd on the ldap client says passwords must be 8 characters. This is seen with the pam_authtok_check: minimum length from /etc/default/passwd: 8
    . It is clearly not using the policy from the directory server but checking locally. So I can login ok using the ldap server for authentication but when I try to change the password it does not use the policy from the server which says I only need a minimum lenght of 6 characters.
    I have read that pam_ldap is only supported for directory server 5.2. Because I am running ds6 and with password compatability in ds6 mode maybe this is my problem. Does anyone know of any updated pam_ldap modules for solaris 9?
    Edited by: ericduggan on Sep 8, 2008 5:30 AM

    you can try passwd -r ldap for changing the ldap passwds...

  • Oracle Text does not return results when String starts with two consecutive vowels

    Hi,
    I hope someone can shed some light on a strange problem we're facing.
    Oracle Database 11g R2 (11.2.0.4) EE 64-bit running on Windows 2008 Server R2.
    When I create a context index on a varchar2 column (surname) it works fine when the surname starts with either a consonant or one vowel. But when the surname starts with two vowels it fails to return the record?
    Please see worked example below:
    create table t1 (surname varchar2(50));
    insert into t1 values ('OURS');
    insert into t1 values ('JOURS');
    insert into t1 values ('ONES');
    commit;
    -- sync every 10 mins
    CREATE INDEX PERSON_SURNAME_IDX ON t1
    (SURNAME)
    INDEXTYPE IS CTXSYS.CONTEXT
    PARAMETERS('MEMORY 50M sync (every "SYSDATE+10/1440")')
    NOPARALLEL;
    -- no rows
    SELECT surname
    FROM t1
    WHERE CONTAINS(surname, 'OURS') > 0;
    -- 1 row
    SELECT surname
    FROM t1
    WHERE CONTAINS(surname, 'JOURS') > 0;
    -- 1 row
    SELECT surname
    FROM t1
    WHERE CONTAINS(surname, 'ONES') > 0;
    Any help or guidance greatly appreciated.
    Thanks,

    Wtf?
    https://docs.oracle.com/database/121/CCREF/astopsup.htm#i634475
    only     then     where
    all     do     into     onto     there     whether
    almost     does     is     or     therefore     which
    also     either     it     our     these     while
    although     for     its     ours
    select
    from v$version
    Oracle Database 12c Enterprise Edition Release 12.1.0.2.0 - 64bit Production    0
    PL/SQL Release 12.1.0.2.0 - Production
    CORE 12.1.0.2.0 Production
    TNS for Linux: Version 12.1.0.2.0 - Production
    NLSRTL Version 12.1.0.2.0 - Production
    SELECT spw_stoplist, spw_word FROM ctx_stopwords
    WHERE spw_stoplist ='DEFAULT_STOPLIST'
    order by nlssort(spw_word, 'NLS_SORT=LATIN')
    ---- snip ----
    DEFAULT_STOPLIST    not
    DEFAULT_STOPLIST    of
    DEFAULT_STOPLIST    on
    DEFAULT_STOPLIST    one
    DEFAULT_STOPLIST    only
    DEFAULT_STOPLIST    or
    DEFAULT_STOPLIST    other
    DEFAULT_STOPLIST    out
    DEFAULT_STOPLIST    over
    DEFAULT_STOPLIST    s
    ---- snip ----

  • Subsequence does not return result

    I want to have a subsequence return a pass or fail result to the main sequence.  I read on the forums to make a pass/fail test in the subsequence and I set that step to cause the sequence to fail.  I set a breakpoint and can see that that step is failing.  I set another breakpoint after the call to the subsequence in the main sequence and that step always passes.
    How do I do this properly? I can't seem to find any good documentation on the subject.
    I have tested this in 3.5, 4.0, and 4.0.1.  The attached sequences were made in 3.5.
    Attachments:
    seq1.seq ‏49 KB
    subseq1.seq ‏30 KB

    Hi Andrew,
    When i closed my TestStand the system asked me so save NI-Types!! That means your Types differs from that which are shipped from NI.
    Maybe you will get some problems with typeconflicts in future.
    For all other users here in this forum be careful when loading the upper or my example. NEVER accept savings to NI-Steptypes !!!!!
    Refer to this Site: type conflict error when using TS_EngineGetSeqFile link: http://forums.ni.com/ni/board/message?board.id=330&message.id=17427#M17427
    greetings from the lake of Constance, Germany
    and get never affected by a type virus
    juergen
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

  • MapViewer.getGeneratedImaegURL() does not return https for SSL mapviewers

    We've setup a SSL mapviewer with an https:// URI but MapViewer.getGeneratedMapImageURL returns http://uri:7002 instead of https://uri:7002
    This is easy enough to fix by testing if the getServiceURL starts with "https" and testing the start of getGeneratedMapURL and then replacing the "http:" with "https:" but it's a bug so we're reporting it here.
    Thanks, Mark

    Hi Mark,
    thanks for your note. We will look it.
    Joao

  • Visual Studio profiler does not show results for XAML + DirectX project

    The case is simple: 
    1) The solution consists of 3 projects:  2 C# ones  (C# XAML project + C# library project) and one C++ runtime component initially created by the wizard, as this is a DirectX project.
    2) "Start Windows Phone application analysis"  runs OK, but when stopped  no profiling results are shown. The message is "0 total samples collected", "No call tree data is available".
    How can this problem be fixed?  What are the assumed reasons?

    (I know the thread is old - but I have found some threads on the net asking about this problem, but nowhere answered, so I'll rectify this here)
    Hey,
    do you happen to have been profiling the *release build* ?
    If so, try this:
    In solution explorer, right-click on the native C++ project -> Properties -> Configuration Properties -> Linker -> Debugging
    The top-most field "Generate Debugging Info" is probabyl empty, which is default for release build. But debugging info is needed to sample-profile functions! So select "Yes" there, and make sure the next option, "generate program
    database file" has a sensible entry.
    For me, this did it.

  • Get-csRgsWorkFlow command does not return result if you are using remote shell

    I am connecting to Lync server remotely using windows powshell.
    When I issue the command locally from the Lync server, I get the correct response. When I do the same command from the remote shell, I get empty response.
    Can you help me why this is happening?

    Have you checked RBAC? 
    "The Get-CsRgsWorkflow cmdlet
    provides a way for you to return information about the workflows configured for use in your organization.
    Who can run this cmdlet: By default, members of the following groups are authorized to run the Get-CsRgsWorkflow cmdlet locally: RTCUniversalServerAdmins. To return a list of all the role-based access control (RBAC) roles this cmdlet
    has been assigned to (including any custom RBAC roles you have created yourself), run the following command from the Windows PowerShell prompt:
    Get-CsAdminRole | Where-Object {$_.Cmdlets –match "Get-CsRgsWorkflow"}
    " - http://technet.microsoft.com/en-us/library/gg425766(v=ocs.14).aspx
    Please mark posts as answers/helpful if it answers your question.
    Blog
    Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

  • Find an item not returning results in SharePoint calendar list

    Environment: SharePoint 2013 upgraded to SP1. We have 1000s of team sites that have been upgraded from 2010 to 2013. In the lists in these sites, quite often I encounter that
    Find an item does not return results for certain fields other than the title field. For example, we have a calendar list which has a Single Line of Text field. I can not get meaningful results searching on
    this field.  I have tried this, no luck:
    http://www.enjoysharepoint.com/Articles/Details/sharepoint-2013-find-an-item-search-box-does-not-return-20956.aspx
    Search service crawls incremental every hour. I hope this does not need a full crawl.
    Thanks, Soumya | MCITP, SharePoint 2010

    Thanks Ganesh. All these settings are as you recommended it to be. Nonetheless I double checked and here are the results:
    Ensure in the Search Service Application that the Web Application is included in the Content Source under SharePoint Start Addresses.
    Yes. Please remember we are getting search results. To be specific we are not getting Find items in the list to be returning accurate results.
    Make sure that the address in Alternate access mappings default text box is same as the start crawl address in the search service application.
    Yes.
    List Setting - Allow items from this list to appear in search results? yes
    Ensured
    set “Require content approval for submitted item?” to “No”.
    It is set to "No". However, will it not work for approved contents also?
    Thanks, Soumya | MCITP, SharePoint 2010

  • Search results showing ID of Managed metadata field

    Our output of the search function in our Sharepoint 2010 intranet shows the id of the managed metadata field (see image).
    Every time a managed metadata field is shown in the result, it is followed by it's ID. Does anyone know the solution to this problem? Does this have something to do with the crawl settings of these managed metadata fields? Thx in advance.

    Hi,
    what needs to be done is to add a new managed property to your search configuration and map it the field in your search result.
    You will find a detailed how to on the following page:
    http://www.insidesharepoint.net/post/Using-taxonomy-fields-in-SharePoint-2010-Part-III.aspx
    Whenever you create a new taxonomy field instead of one field two will be created one contain the TermValue|<GUID of Term> and a another one with
    with term value itself.
    If you create a field named "color" then you will find the following fields in the crawled property "ows_color" and "ows_taxid_color". The first field "ows_color" is the one you need to use.
    If you are more interested in how Taxonomy Fields work you should check out my blog post:
    http://www.n8d.at/blog/sharepoint-2010/anatomy-of-managed-metadata-fields/
    Kind regards
    Stefan
    http://www.n8d.at/blog
    Follow me on Twitter: StFBauer |
    n8design
    Microsoft Community Contributor 2011
    MCTS - SharePoint / WSS Configuration and Development

  • Since I updated my 4S iphone to the latest iOS7 version, I can no longer close any of my apps.  As a result, all my apps remain open on my phone.  Even powering down and restarting does not solve the problem.  Specifically, the icons don't wiggle anymore.

    Since I updated my 4S iphone to the latest iOS7 version, I can no longer close any of my apps.  As a result, all my apps remain open on my phone.  Even powering down and restarting does not solve the problem.  Specifically, when I double-click the start button, my open app icons display.  But when I hold my finger on an icon, the apps do not wiggle and display an "x" to close.  Any advice... thanks?!

    Double tap the Home button, then swop upwards on the App Preview (not the App Icon). Tap the Home button again when done to return to normal screen.

  • Xquery does not return any results on 10.2.0.4, does work on 10.2.0.5

    I have a Xquery statement that works as expected on Oracle 10.2.0.5 but does not return any results on Oracle 10.2.0.4.
    Is this the result of a badly written query? A bug in 10.2.0.4?
    Is there a way to rewrite the query so that is does work on 10.2.0.4?
    Testcode:
    declare
       l_xml xmltype;
       -- Select layers with TileMatrixSet EPSG:28992
       cursor c_layer(p_xml xmltype) is
          select t.*
            from xmltable(xmlnamespaces(default 'http://www.opengis.net/wmts/1.0'
                                       ,'http://www.opengis.net/ows/1.1' as "ows"
                                        ,'http://schemas.opengis.net/gml' as "gml"
                                        ,'http://www.w3.org/1999/xlink' as "xlink"
                                        ,'http://www.w3.org/2001/XMLSchema-instance' as "xsi")
                          ,'for $d in //Layer[TileMatrixSetLink/TileMatrixSet="EPSG:28992"] return $d' passing
                          p_xml columns title varchar2(100) path 'ows:Title'
                          ,format varchar2(100) path 'Format'
                          ,style xmltype path 'Style') as t;
    begin
       l_xml := xmltype.createxml('<?xml version="1.0" encoding="UTF-8"?>
    <Capabilities xmlns="http://www.opengis.net/wmts/1.0"
    xmlns:ows="http://www.opengis.net/ows/1.1"
    xmlns:xlink="http://www.w3.org/1999/xlink"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:gml="http://www.opengis.net/gml" xsi:schemaLocation="http://www.opengis.net/wmts/1.0 http://schemas.opengis.net/wmts/1.0/wmtsGetCapabilities_response.xsd"
    version="1.0.0">
    <Contents>
      <Layer>
        <ows:Title>brtachtergrondkaart</ows:Title>
        <ows:Identifier>brtachtergrondkaart</ows:Identifier>
        <Style isDefault="true">
          <ows:Identifier>_null</ows:Identifier>
        </Style>
        <Format>image/png8</Format>
        <TileMatrixSetLink>      <TileMatrixSet>EPSG:28992</TileMatrixSet>
        </TileMatrixSetLink>  </Layer>
      <Layer>
        <ows:Title>top10nl</ows:Title>
        <ows:Identifier>top10nl</ows:Identifier>
        <Style isDefault="true">
          <ows:Identifier>_null</ows:Identifier>
        </Style>
        <Format>image/png8</Format>
        <TileMatrixSetLink>      <TileMatrixSet>EPSG:28992</TileMatrixSet>
        </TileMatrixSetLink>  </Layer>
      <Layer>
        <ows:Title>bgt</ows:Title>
        <ows:Identifier>bgt</ows:Identifier>
        <Style isDefault="true">
          <ows:Identifier>_null</ows:Identifier>
        </Style>
        <Format>image/png8</Format>
        <TileMatrixSetLink>      <TileMatrixSet>EPSG:28992</TileMatrixSet>
        </TileMatrixSetLink>  </Layer>
    </Contents>
    </Capabilities>');
       for r_layer in c_layer(l_xml)
       loop
          dbms_output.put_line(r_layer.title);
       end loop;
    end;Result on 10.2.0.5:
    brtachtergrondkaart
    top10nl
    bgt

    This one's strange indeed.
    I can reproduce on 10.2.0.4 and one of the following seems to fix it :
    1) Specifying the column list in the SELECT, instead of t.* :
       -- Select layers with TileMatrixSet EPSG:28992
       cursor c_layer(p_xml xmltype) is
          select t.title, t.format, t.style
            from xmltable(or,
    2) Using an extended FLWOR expression :
    for $d in //Layer
    where $d/TileMatrixSetLink/TileMatrixSet = "EPSG:28992"
    return $dMaybe you've already noticed but the problem only occurs within a PL/SQL context.
    The same query run from SQL is OK.

  • When using rabbitmq-jms for vFabric RabbitMQ javax.jms.Message.getJMSDestination does not return the actual destination when it is received from a consumer listening on a Topic with a wild card

    When using rabbitmq-jms for vFabric RabbitMQ javax.jms.Message.getJMSDestination does not return the actual destination when it is received from a consumer listening on a Topic with a wild card. I have tested with both 1.0.3 and 1.0.5 clients with RabbitMQ 3.1.5.
    I was wondering if the community was aware of this problem and if there are any workarounds? If not what is the proper channel to file a bug report. An example code snippet is below. The test fails because the TextMessageMatcher expects the destination passed in on construction (second parameter) to equal the desination on the message received (aquired from getJMSDestination).
            Mockery context = new Mockery();
            final MessageListener messageListener = context.mock(MessageListener.class);
            final Latch latch = new LatchImpl();
            final String prefix = "test" + System.currentTimeMillis();
            context.checking(new Expectations() {
                    oneOf(messageListener).onMessage(with(new TextMessageMatcher("MSG1", prefix + ".1234")));
                    will(new CustomAction("release latch") {
                        @Override
                        public Object invoke(Invocation invocation) throws Throwable {
                            latch.unlatch();
                            return null;
            final Connection connection = createConnection(null, null);
            Session session = connection.createSession(false, Session.AUTO_ACKNOWLEDGE);
            connection.start();
            Topic wildcardTopic = (Topic) getInitialContext().lookup(prefix + "." + "#");
            Topic destination = (Topic) getInitialContext().lookup(prefix + ".1234");
            final MessageConsumer consumer = session.createConsumer(wildcardTopic);
            consumer.setMessageListener(messageListener);
            MessageProducer producer = session.createProducer(null);
            producer.send(destination, session.createTextMessage("MSG1"));
            latch.await(5000);
            connection.close();
            Thread.sleep(5);
            context.assertIsSatisfied();

    Check where your MDB sends the [response] messages to.

  • Ctxrule - match does not return expected result

    v.11.1.07 - I have created a ctxrule index as detailed below. However, although a query should match on the given document, it does not return. Any ideas?
    begin
    ctx_ddl.create_preference('ot_lexer', 'basic_lexer');
    ctx_ddl.set_attribute('ot_lexer', 'index_stems', 'ENGLOSH');
    end;
    begin
    ctx_ddl.create_section_group('ot_sec_group', 'auto_section_group');
    end;
    create table ot_profile_test
    (profile_id number,
    query clob);
    create index ot_profile_rule_ndx on ot_profile_test(query)
    indextype is ctxsys.ctxrule parameters
    ('stoplist ctxsys.empty_stoplist
    section group ot_sec_group
    lexer ot_lexer');
    insert into ot_profile_test values(1, '($apple and $pear) and (1 within food)');
    commit;
    exec ctxsys.ctx_adm.set_parameter('log_directory', '/yourdir');
    exec ctx_output.start_log('ot');
    exec ctx_output.add_event(ctx_output.event_index_print_rowid);
    exec ctx_output.add_event(ctx_output.event_index_print_token);
    exec ctx_ddl.sync_index('ot_profile_rule_ndx', '2040M', null, 1, null, ctx_ddl.lock_nowait_error);
    exec ctx_output.end_log;Then, run a query:
    declare
    a clob := 'apple orange pears banana
    <metadata>
    <indicators>
       <food>1</food>
    </indicators>
    </metadata>
    vn_profile_id number;
    begin
    select profile_id into vn_profile_id
    from ot_profile_test
    where matches(query, a) > 0;
    dbms_output.put_line(vn_profile_id);
    end;
    ERROR at line 1:
    ORA-01403: no data found
    ORA-06512: at line 8Shouldn't profile_id = 1 be returned?
    Also, shouldn't the logfile have 2 rows written to $I?
    WRITING TOKEN APPLE:((PEAR) = (PEARS)) * ((1) WITHIN FOOD),0
    WRITING TOKEN APPLES:((PEAR) = (PEARS)) * ((1) WITHIN FOOD),0

    You need to use a basic_wordlist instead of a basic_lexer and ENGLISH instead of ENGLOSH in order to use stemming and your clob (variable a) must be valid html or xml in order to search within sections. Please see the simplified demonstration below.
    [email protected]_11gR2> begin
      2    ctx_ddl.create_preference ('ot_wordlist', 'basic_wordlist');
      3    ctx_ddl.set_attribute ('ot_wordlist', 'stemmer', 'ENGLISH');
      4    ctx_ddl.create_section_group ('ot_sec_group', 'auto_section_group');
      5  end;
      6  /
    PL/SQL procedure successfully completed.
    [email protected]_11gR2> create table ot_profile_test
      2    (profile_id  number,
      3       query         clob)
      4  /
    Table created.
    [email protected]_11gR2> create index ot_profile_rule_ndx
      2  on ot_profile_test (query)
      3  indextype is ctxsys.ctxrule
      4  parameters
      5    ('stoplist     ctxsys.empty_stoplist
      6        wordlist     ot_wordlist
      7        section group     ot_sec_group')
      8  /
    Index created.
    [email protected]_11gR2> insert into ot_profile_test values
      2    (1, '($apple and $pear) and (1 within food)')
      3  /
    1 row created.
    [email protected]_11gR2> commit
      2  /
    Commit complete.
    [email protected]_11gR2> exec ctx_ddl.sync_index ('ot_profile_rule_ndx')
    PL/SQL procedure successfully completed.
    [email protected]_11gR2> declare
      2    a clob :=
      3        '<table>
      4           <fruits>apple orange pears banana</fruits>
      5           <metadata>
      6             <indicators>
      7            <food>1</food>
      8             </indicators>
      9           </metadata>
    10         </table>';
    11  begin
    12    for r in
    13        (select profile_id
    14         from      ot_profile_test
    15         where  matches (query, a) > 0
    16         order  by profile_id)
    17    loop
    18        dbms_output.put_line (r.profile_id);
    19    end loop;
    20  end;
    21  /
    1
    PL/SQL procedure successfully completed.
    [email protected]_11gR2>

Maybe you are looking for

  • Error in Upload file-table or view does not exist-wwv_flow_file_objects$

    Hi, i am trying to upload a file and then store the contents of the file into one of my tables in the schema.I wrote one package for uploading the file and then a process to insert each record in the uploaded file to the table in my schema.When i try

  • I'M (not) SEEING RED!  Color Sync issues w/ Pixma 4000

    For some reason the magenta is really off on my printer (canon pixma 4000). Regardless if I print something on Photoshop, iPhoto 5, or Google Maps (Double True), the red hue is a faded hue, almost orange. All my inks are full and have been installed

  • Restrict the visibility of a field  in the table

    There is a field in master database (pa0002) ,  i dont know from how many ways the  field value can be seen  like transaction, table view or abap query, but the requirement is the restrict the visibility of the value of the field to specific user , s

  • PO release strategy based on Material Group (CEKKO - MAKTL)

    Hi Experts, I have configure the Rel strategy based CEKKO-MATKL (material group) for purchase order, but when i raise the PO Rel strategy is not affecting, Can any body tell me why. Regards, Kumar

  • Aperture 2.1 Sluggish Exposure Adjustment Sliders

    Description of Problem: 1. When the Straighten Brick is applied to an image being adjusted, the Exposure Brick sliders become erratic and do not track mouse movement or the Wacom Tablet Stylus tip. 2. This condition substantially worsens when the Hig