Creation of package structure for ABAP proxy scenario

Hi All,
I have a doubt on package structure used for ABAP proxy scenario. What is the specific reason to create a four level package structure? Can some one please explain? Thanks in advance.
Regards,
Sudheer.

Hi Sudheer,
Can you pls clarify what do you mean by 'four level package structure' ?
Are you referring to the ABAP structures that get created during creating the proxy by SPROXY transaction ? These structures get automatically created. We simply have to write the code using these structures.
Or do you mean the 'package' which is mandatory to create a transportable ABAP object ? i.e. transport from Development to Staging and then Production.
Regards,

Similar Messages

Four layered package structure for ABAP proxies

Hi
I am trying to generate an outbound ( client ) abap proxy in our WAS 640 based ERP system by pointing to a XI message interface on the XI integration repository. I have a single package ZPROXY ( not a main or a structure package ) created in our ERP system to hold the proxy structures ( classes, interfaces ). I have this package assigned to a transport layer ( a common transport layer through which other ABAP objects are to be transported ). Is it really necessary to have a four layer package structures for proxies to be transported and work in the QA/Production system ?

Hi Sudheer,
Can you pls clarify what do you mean by 'four level package structure' ?
Are you referring to the ABAP structures that get created during creating the proxy by SPROXY transaction ? These structures get automatically created. We simply have to write the code using these structures.
Or do you mean the 'package' which is mandatory to create a transportable ABAP object ? i.e. transport from Development to Staging and then Production.
Regards,

Configure XI adapter for abap proxy scenario- plz help

Hi,
Pleas help me in configureing the XI adpater in abap server proxy scenario, answer the one in bold in below
Scenario is asynchronous
Http -> XI ->R/3(abap server proxy)
sender: Through http client
receiver is abap server proxy
Repository objects:
Sender: sender_DT, sender_MT, sender_MI(outbound asynchronous)
Receiver: receiver_MI
Interface mapping: source=sender_MI, receiver_MI.
Proxy generated on R/3 client 550 for receiver_MI.
this proxy internally calls an RFC which inturn updates a table.
Configuartion objects:
Sender: business service, no comm channel since http sender.
receiver: R/3 business system
Comm channel: receiver_cc type of XI.
transport protocol: http
message protocol : XI 3.0, since both XI and R/3 on webas 6.4
addressing type: URL
target host: ??? where can I find this
service number: ?? where can I find this
path: /sap/xi/engine?type=entry i guess the path is correct for XI 3.0
My system details: XI - client 400, R/3 client 550.
Authentiction data:
user name: this user suppossed to be from R/3 or XI?,
passwrod; proper password
logon client: the client supposed to be of R/3 or XI?
Recevr determinaion, interface determination and recevr agrrement looks fine.
Please reply , your help is appreciated.
Thanks
KK

Hi,
>>>target host: ??? where can I find this
Your R/3 host number you can find System->Status
>>>service number: ?? where can I find this
You can find in SMICM in services
>>>user name: this user suppossed to be from R/3 or XI?,
passwrod; proper password
logon client: the client supposed to be of R/3 or XI?
R/3 logon details.
Thanks,
Prakash

What is package structure for Client ABAP Proxy?

1. What is the package structure need to be followed for creating abap client proxy.
2. I read some where in the form, it need to be 4 levels. Why is it?
Thank you
Ganges Leaves

Hi
U hav to create a 4 level package structure for client ABAP proxy.
U can create ur on packages
1st level-structure package.
2nd level-main package.
3rd and 4th level-sub packages.
To the 4th level only u hav to create proxy.
The classes and code wil be automatically generated at the time of proxy creation.
I think the 4 level structure bcz while in r/3 everythin in integration builder like software component version and all wil be takin as different levels.
Also u can go through the weblogs in the above replies u got.
Regards
Victoria.

INTERNAL - AMF_ERROR in XML -- ABAP proxy scenario

Hi Experts,
Can any one help me to solve this following issue please, it is happening while I am executing the scenario between XML File to ABAP Proxy scenario.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AMF_ERROR</SAP:Code>
<SAP:P1>1</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error when processing message number 1 in package No object type found for the message. Check that the corresponding process is activated An exception has occurred.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>.
This XML message has got 5 Lines Header and more than 100 Lin Items, this kind of Header and Lin item message 3 to 4 in one XML, I am using multi mapping. Message mapping shows working fine, OM also shows working fine. BPM is splitting messages to send messages to ABAP Proxy on SNC 7.0. After I have done all with SDN experts support, still I am having the above issue. can any one experties might help to resolve this?
I will appreciate your support.
Thanks & Regards
San

Can you please explain the solution.
Regards,
Rashi

FTP to ABAP Proxy Scenario - getting error CO_TXT_CHANNEL_PASSWORD_ERROR

We have transported PI and EP data from development server to respective production, every thing is running fine except the abap proxy scenarios i.e. PI reads file from ftp location and calls the abap proxy but we are getting following errors:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_CHANNEL_PASSWORD_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to read user password from communication channel of type Error when accessing the secure store (access ID = FD768D4A8772DB50E1000000AC10041E) Error while reading from the secure store: ERROR_UNKNOWN: Cannot find entry in secure store (SECSTORE,023)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any solution?
Please note that I have searched and applied solutions given on SDN forums but didn't get any success. So I am looking for new suggestions.
Regards,
Jawed Ali

Jawed ,
Please test the HTTP destination of your receiver comm channel.
Which is the RFC connection to your R3 system.
Transaction SM59 and check the logon parameter for the connection you are using.
Regards,

Issue in Iodc- abap proxy scenario

Hi all
I have a idoc to abap proxy scenario. The issue is ,
when we send the idoc to client A of target system, it works ifne.
But when we send the saem mesage to Client B, we find a error message in sxmb_moni of Target system. the mesage is Application_fault.
Is it because of any error in XI configuration or somethin else.

hi all
thanks for all your responses.
I forgot to mention that based on a particualr field value in the idoc , it will be routed to eihter Client 100 or 200 .
I gave the conditions in Receiver Determination.
Same Server Proxy is used in both the target business sytems.
I have done all the Configuration Steps ,( Created two separate business systems also )
Also I have checked wiht all the system settings to be made in the target system B.
When i trigger the idoc to Client 100, it goes to XI and then reaches Client 100 of System B
without any problem. I get the desired result from proxy code.
When i send the saem idoc to Client 200, it reaches the target system and routed to client 200. But getting this error message in
the Call Inbound PRoxy step. (from sxmb_moni)
<SAP:Category>Application</SAP:Category>
<SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
Since it reaches the target system correctly, i guess there is nothing wrong in the XI configuration side.
But if its Application fault, how come the same data is processed successfully in one client whereas it thorws error in another.

HTMLError in sxmb_moni, Idoc to ABAP Proxy Scenario

Hi Friends
I am trying to send data from R3 to SCMTM system(SAP System), via Idoc to ABAP Proxy Scenario ,I am getting the following under HTMLError in sxmb_moni
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
<SAP:P3>(See attachment HTMLError for details)</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED) (See attachment HTMLError for details)</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Any ideas will be helpful.

Hi,
I faced similar problem. it was due to configuration problem in SXMB_ADM. corss check specific server confiration in SXMB_ADM.
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Regards,
Reyaz

Configure ABAP Proxy scenario in PI7.3

Hello Experts,
Can someone please let me know if we have somewhere step by step procedure to configure an ABAP Proxy scenario in PI7.3, I couldn't find How-to guide related to this on SDN.
Thanks a lot.
Best Regards,
Shweta

I dont know abt your installation whether you have java stack alone or both java stack and abap stack.
AAE or local processing:
You can do using soap adapter as transport protocol and message protocol as XI for proxy. This way you can use local processing using AAE. I dont see documents in SDN as of now. But it is pretty simple. Just follow the steps what I mentioned.
Classical processing or abap engine:
Still the same as previous versions.

Prerequisites to configuration for ABAP Proxy -???

My scenario is file->XI->R/3(abap server proxy).
Xi and R/3 are 2 seperate business systems
-Abap server proxy created on R/3 business system. R/3 client 550
-Xi client 400.
-SLD is common for both XI and R/3
My question is in reference to the below message thread:
1.I understand all the below configuartaion has to be done on R/3 business system, tell me am I correct
2. are these configuartion needed for client proxy as well as server proxy also?
HTTP_RESP_STATUS_CODE_NOT_OK
The prerequisites to configuration for ABAP Proxy include: (landscape dependent)
1. The business systems should be based on SAP Web AS 6.20 and SAP Web AS 6.20 kernel patch level above 1253
2. You have installed the XI Add-On in each of these business systems as described in the Installation Guide SAP Exchange Infrastructure 3.0
3. The business systems and your central Integration Server are maintained in the System Landscape Directory (SLD).
Configuration required on the Business System:
1. Create HTTP connection in the business system.
Configuration Details:
Technical Setting:
1. Following Inputs are required for technical setting
1 Connection Type: H
2 Target Host: System name
3 Service Number: HTTP Port name
4 Path Prefix: /sap/XI/engine/?type=entry
Logon Security
On the Logon/Security tab page, enter the following logon data:
1 User: XIAPPLUSER (for example); this user should represent the sending business system (see also the SAP XI Security Guide under Service Users for Message Exchange).
2 Password: the password you have specified for this user
3 Client: SAP XI Integration server
4 Language: Language required
2. Configuration Business system as local Integration Engine.
1. Goto Transaction SXMB_ADM
2. Choose Edit --> Change Global Configuration Data.
3. Select Role of Business System: Application system
4. Corresponding Integration server: dest://<HTTPDESTINATION>. Here <HTTPDESTINATION> SAPISU_XID created in step 1. Dest://SAPISU_XID.
5. Under Specific Configuration Data you can specify additional configuration data
1.Select the relevant category under Specific Configuration Data.
2.Choose Change Specific Configuration Data.
For ABAP Proxies, Add the following configuration:
1.Category RUNTIME
2.Parameters: IS_URL
3.Current Value: dest://SAPISU_XID
Configuration of the Integration Engine
3. Connection between Business System and System Landscape Directory
1. Create RFC destination (TCP/IP) LCRSAPRFC and SAPSLDAPI for the SLD connection.
1.Execute transaction SM59 in the business system.
2.Choose Create.
3.Enter at least the following:
1.RFC Destination: LCRSAPRFC
2.Connection Type: T
3.Description: <your description>
4.Choose ENTER.
5.Choose the Technical settings tab page and do the following:
6.In the Program ID field under Registered Server Program, enter LCRSAPRFC
7.This program ID must correspond to a program ID specified in the RFC engine settings of the SAP J2EE Engine on the Integration Server host.
RFC Destination
2. Maintaining the SAP J2EE Connection Parameters for LCRSAPRFC and SAPSLDAPI in SAP J2EE engine
1. Goto J2EE Engine
2. Choose Cluster --> Server --> Services. JCo RFC provider
3. Under RFC destination specify the following:
Program ID: LCRSAPRFC
Gateway Host: <Integration Server host>
Gateway Service: <Integration Server gateway service>
Number of process: 3
4. Under Repository specify the following:
Application Server: <Integration Server host>
5. Choose Set.
3. Maintain SLD access details in Transaction SLDAPICUST
1. You can reuse this program ID for all Business systems
2. If there is HTTP error during connection, first run transaction SLDCHECK in the Business system. Also check that HTTP connection is working fine.
3. In XI Adapter use HTTP connection rather then giving R/3 input details as this is easier to transport and maintenance
4. One receiver adapter can be used for all Interfaces connecting to a Business system.
Thanks for your reply in adavnce.
KK

2. are these configuartion needed for client proxy as well as server proxy also?
>>>>
the configuration is one time thing and your R3 will act as a server or client according to the data being sent or received.
In R3 a point to be noted is that in SXMB_ADM -> Intg. Engine Confg. -> Role of Business System sud be as a Application System.
Ref: /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Message was edited by: Shabarish Vijayakumar

ABAP proxy scenario file - PI7.1- ECC NO_MAPPINGPROGRAM_FOUND

Hello Experts,
I have ABAP proxy scenario file -> PI7.1->ECC . I am getting an error for communication between PI and ECC system. the error is NO_MAPPINGPROGRAM_FOUND and pointing to operation mapping in the software component.
What i found in TCODE SXMB_MONI is 2 adaptor call one from one below the other out of which one is in error.
Also when a file is passed from the file server to the SAP PI I see 2 entries in SXMB_MONI for the same Payload one from source system to target system and one from target system to source system ( ie. from business component as sender and ECC as receiver system and one entry for ECC system as receiver and business system for file as receiver ) is this how it should be
one more thing i would like to specify is that my service interface is Point to point enabled . Is it happening because of that
Request you help on urgent basics
BR Heth

Hi,
1. in PI, by hazard, your Service Interface (SI) does not the mode "synchronous"?
2. or does this SI was declared firstly with "synchronous" mode and the proxy generated with this mode, and then you decided to put "Asynchronous"... without to regenerate the proxy in ECC?
If it's the case, in ECC, select your SI, do a right-click and regenarete the proxy.
3. for the 2nd message (returned by ECC to PI), have you seen the Payload content and SOAP Header?
Could you please also check the Pipeline (e.g CENTRAL, CENTRAL_BACK) ?
4. In SXMB_MONI of ECC, how many messages have you: one ? or two ?
Regards
Mickael

File to ABAP Proxy Scenario

Hi All,
I am doing File-to-ABAP Proxy Scenario, in the sender side side it is picking the file, but in sxmb_moni it is giving the error:
*<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
*- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">DUPLICATE_DETECTED</SAP:Code>
<SAP:P1>4CFF4691EEE211DC85E30019D1522982</SAP:P1>
<SAP:P2>CENTRAL</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message ID 4CFF4691EEE211DC85E30019D1522982 already exists in called system (pipeline CENTRAL)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Can u plz tell me why this error is occurring and how we can resolve this error.
Thanks & Regards,
Vikas

Hi Vikas
make a dummy change and activate your object then make a full refresh
you can make it through in 3 ways
1) tcode SXI_CACHE
2) go to ID -> environment and make a full cache refresh
3) http://<host>:5<sys#>00/CPACache/refresh?mode=full Full CPA cache refresh
when you do the developement then these are stored in ABAP data dictionary table which can be refreshed by delta cache
while full cache will delete this temporary object and make this cahe into runtime
hope this will help you
thanks
sandeep
if helpful reward points

How to configure systems for ABAP Proxy use

Can somebody please point me to the documentation regarding the configuration settings for the use of ABAP proxies, on both the XI and client sides? I have performed readiness checks as specified by SAP, the ABAP Proxy tests all pass, yet when I write a program with a proxy, the message does not appear in the integration engine monitor.
I think I have missed something in configuration settings, but don't know for sure. hence the request.
Kind Regards,
Tony.

Hi,
Please follow the below configuration steps for ABAP proxy:
ABAP Proxy configuration:
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Thnx
Chirag

Getting error back to XI for Asyn Proxy scenario

Hi All,
I am working on proxy scenario. i am using fault message type for rising exception and scenario is asynchronous. if ther is any application is throwing some exception, now it is not coming to xi. we can monitor it in R3. but i need to rise alert if ther is any application error. is ther any way to get the error back to XI for async proxy scenario...?
Please help me
Regard
Pradeep P N

Hi
I will explain my scenario, suppose the message from xi reaches R3 succefully, but due to some back end configuration the data is not getting updated(eg for creating sale order ther should be some back end configuration), in that case the proxy will raise exception and message will get failed in R3, i can monitor that in SXI_MONITOR in R3 as failed. but for XI it is success, When ever a message is getting failed in R3, i need to rise one exception.
In XI sxi_monitor i can see it as success, but in message monitoring while monitoring Proxy Bussiness system i can show the status as Apllication error, if iam aable to get this proxy business system in Alert configuration then i think we can rise alert. is ther any way to get proxy business system with Adapter engine and Integration engine. Please help me....
Regards
Pradeep P N

What are the pre-requisite for ABAP Proxy communication?

What are the pre-requisite for ABAP Proxy communication?

hi,
How to create proxy.
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm
How to Activate Proxy.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
ABAP Server Proxies (Inbound Proxy)
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
OutBound Proxy (Client Proxy)
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
File to R/3 via ABAP Proxy with good example
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
Debug your inbound ABAP Proxy implementation
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
http://help.sap.com/saphelp_nw2004s/helpdata/en/48/d5a1fe5f317a4e8e35801ed2c88246/frameset.htm
Synchronous Proxies:
Outbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2boutbound%2bprogram%2b-%2bpurchase%2border%2bsend
Inbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
regards
srinivasreddy

Creation of package structure for ABAP proxy scenario

Similar Messages

Maybe you are looking for