CRM 2007 Business Role IC_AGENT not showing the whole screen

Hi,
I set up CRM 2007 successful for a couple of standard roles like TPM_PRO, SALESPRO and SERVICEPRO. The system is working fine. Assigning the business role IC_AGENT is showing me an uncomplete screen. The area for navigation bar, the account info, the alerts and the communication information is blank. Has somebody an idea what is wrong?
Thanks and best wishes,
Andreas

Hi Prasoon,
unfortunatly I cannot help you. It is still not working. Luckly was that CRM 2007 we were just preparing for demonstration. So at the end we showed something different.
But next step what I would do is open an OSS message due to the fact that it is a standard role and it has to work.
Best regards,
Andreas

Similar Messages

Monitor not showing the whole screen when I log out of Xorg/Openbox

Please help, what happens is..
I log into arch, it boots fine (it displays the loading of daemons in like arabic or something but that's another matter!), I can see everything, I 'startx' into Openbox and that's all fine but when I log out of X it cuts off the bottom of my screen.
I've got a widescreen 1680x1080 monitor and an Nvidia GeForce 8400 GS graphics card and I've tried using nvidia and nouveau drivers.
It only started AFTER i'd installed Xorg, I'd just log into x then kill it and i'd have half my screen missing.
I've tried setting nvidia-settings and editing the conf files in Xorg but it must be an issue outside of X surely, as It's always fine in openbox?
any ideas?
Thanks.
EDIT: I did try searching but to no avail - if there's a topic on this i'm very sorry =/
Last edited by teatreetea (2011-01-12 15:28:07)

I don't know how to do the nested scroll thing I'm sorry
/var/log/Xorg.0.log
[ 3557.788] (II) Loading extension DOUBLE-BUFFER
[ 3557.788] (II) LoadModule: "record"
[ 3557.788] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 3557.788] (II) Module record: vendor="X.Org Foundation"
[ 3557.788] compiled for 1.9.2, module version = 1.13.0
[ 3557.788] Module class: X.Org Server Extension
[ 3557.788] ABI class: X.Org Server Extension, version 4.0
[ 3557.788] (II) Loading extension RECORD
[ 3557.788] (II) LoadModule: "extmod"
[ 3557.788] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 3557.788] (II) Module extmod: vendor="X.Org Foundation"
[ 3557.788] compiled for 1.9.2, module version = 1.0.0
[ 3557.788] Module class: X.Org Server Extension
[ 3557.788] ABI class: X.Org Server Extension, version 4.0
[ 3557.788] (II) Loading extension MIT-SCREEN-SAVER
[ 3557.788] (II) Loading extension XFree86-VidModeExtension
[ 3557.788] (II) Loading extension XFree86-DGA
[ 3557.788] (II) Loading extension DPMS
[ 3557.788] (II) Loading extension XVideo
[ 3557.788] (II) Loading extension XVideo-MotionCompensation
[ 3557.788] (II) Loading extension X-Resource
[ 3557.788] (II) LoadModule: "glx"
[ 3557.789] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3557.799] (II) Module glx: vendor="NVIDIA Corporation"
[ 3557.799] compiled for 4.0.2, module version = 1.0.0
[ 3557.799] Module class: X.Org Server Extension
[ 3557.799] (II) NVIDIA GLX Module 260.19.29 Wed Dec 8 12:24:30 PST 2010
[ 3557.799] (II) Loading extension GLX
[ 3557.799] (II) LoadModule: "dri"
[ 3557.799] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 3557.800] (II) Module dri: vendor="X.Org Foundation"
[ 3557.800] compiled for 1.9.2, module version = 1.0.0
[ 3557.800] ABI class: X.Org Server Extension, version 4.0
[ 3557.800] (II) Loading extension XFree86-DRI
[ 3557.800] (II) LoadModule: "dri2"
[ 3557.800] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 3557.800] (II) Module dri2: vendor="X.Org Foundation"
[ 3557.800] compiled for 1.9.2, module version = 1.2.0
[ 3557.800] ABI class: X.Org Server Extension, version 4.0
[ 3557.800] (II) Loading extension DRI2
[ 3557.800] (II) LoadModule: "nvidia"
[ 3557.800] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 3557.801] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 3557.801] compiled for 4.0.2, module version = 1.0.0
[ 3557.801] Module class: X.Org Video Driver
[ 3558.216] (II) NVIDIA dlloader X Driver 260.19.29 Wed Dec 8 12:10:14 PST 2010
[ 3558.216] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 3558.216] (--) using VT number 8
[ 3558.220] (II) Loading sub module "fb"
[ 3558.220] (II) LoadModule: "fb"
[ 3558.220] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 3558.221] (II) Module fb: vendor="X.Org Foundation"
[ 3558.221] compiled for 1.9.2, module version = 1.0.0
[ 3558.221] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3558.221] (II) Loading sub module "wfb"
[ 3558.221] (II) LoadModule: "wfb"
[ 3558.221] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 3558.221] (II) Module wfb: vendor="X.Org Foundation"
[ 3558.221] compiled for 1.9.2, module version = 1.0.0
[ 3558.221] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3558.221] (II) Loading sub module "ramdac"
[ 3558.221] (II) LoadModule: "ramdac"
[ 3558.221] (II) Module "ramdac" already built-in
[ 3558.221] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Screen0" for depth/fbbpp 24/32
[ 3558.221] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 3558.221] (==) NVIDIA(0): RGB weight 888
[ 3558.221] (==) NVIDIA(0): Default visual is TrueColor
[ 3558.221] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 3558.221] (**) NVIDIA(0): Enabling RENDER acceleration
[ 3558.222] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 3558.222] (II) NVIDIA(0): enabled.
[ 3559.086] (II) NVIDIA(0): NVIDIA GPU GeForce 8400 GS (G98) at PCI:1:0:0 (GPU-0)
[ 3559.086] (--) NVIDIA(0): Memory: 524288 kBytes
[ 3559.086] (--) NVIDIA(0): VideoBIOS: 62.98.71.00.52
[ 3559.086] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 3559.086] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 3559.086] (--) NVIDIA(0): Connected display device(s) on GeForce 8400 GS at PCI:1:0:0
[ 3559.086] (--) NVIDIA(0): NTS MBW-SERIAL (CRT-1)
[ 3559.086] (--) NVIDIA(0): NTS MBW-SERIAL (CRT-1): 400.0 MHz maximum pixel clock
[ 3559.136] (II) NVIDIA(0): Assigned Display Device: CRT-1
[ 3559.136] (==) NVIDIA(0):
[ 3559.136] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 3559.136] (==) NVIDIA(0): will be used as the requested mode.
[ 3559.136] (==) NVIDIA(0):
[ 3559.136] (II) NVIDIA(0): Validated modes:
[ 3559.136] (II) NVIDIA(0): "nvidia-auto-select"
[ 3559.136] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
[ 3559.172] (--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config
[ 3559.172] (--) NVIDIA(0): option
[ 3559.172] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 3559.172] (--) Depth 24 pixmap format is 32 bpp
[ 3559.172] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 3559.174] (II) NVIDIA(0): Initialized GPU GART.
[ 3559.182] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 3559.182] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 3559.182] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 3559.182] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 3559.182] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 3559.182] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 3559.182] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 3559.182] (II) NVIDIA(0): Config Options in the README.
[ 3559.187] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 3559.254] (II) Loading extension NV-GLX
[ 3559.278] (II) NVIDIA(0): Initialized OpenGL Acceleration
[ 3559.283] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 3559.283] (II) NVIDIA(0): Initialized X Rendering Acceleration
[ 3559.283] (==) NVIDIA(0): Backing store disabled
[ 3559.283] (==) NVIDIA(0): Silken mouse enabled
[ 3559.290] (==) NVIDIA(0): DPMS enabled
[ 3559.290] (II) Loading extension NV-CONTROL
[ 3559.291] (II) Loading extension XINERAMA
[ 3559.291] (II) Loading sub module "dri2"
[ 355/var/log/Xorg.0.log
[ 3559.767] (**) AT Translated Set 2 keyboard: always reports core events
[ 3559.767] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 3559.786] (--) AT Translated Set 2 keyboard: Found keys
[ 3559.786] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 3559.786] (II) XINPUT: Adding extended input device "AT Translated Set 2 key$
[ 3559.786] (**) Option "xkb_rules" "evdev"
[ 3559.786] (**) Option "xkb_model" "evdev"
[ 3559.786] (**) Option "xkb_layout" "us"
[ 3559.787] (II) config/udev: Adding input device PC Speaker (/dev/input/event$
[ 3559.787] (II) No input driver/identifier specified (ignoring)
mod edit: code tags
Last edited by litemotiv (2011-01-12 16:12:59)

Ever since I updated InDesign CC (2014) approximately 22 days ago... I CANNOT get the welcome screen to not come on at the launch on InDesign. I set the preferences in InDesign to NOT show the welcome screen upon launch, but it will NOT hold the preferenc

Ever since I updated InDesign CC (2014) approximately 22 days ago... I CANNOT get the welcome screen to not come on at the launch on InDesign. I set the preferences in InDesign to NOT show the welcome screen upon launch, but it will NOT hold the preferences i choose. Anyone else have any other ideas? I am about to lose my mind... I hate you ADOBE!!!

that s just the problem, that is why my level of frustration is boiling over ... I have told InDesign over and over again "Do Not Show Again" but it will just not hold the settings. It might hold it for a day or so, but then suddenly there it is again on another launch. Very very annoying.

My Iphone isnt working and its not showing the home screen after trying yesterday to download OS5, please help me

hi
yesterday i tryed to sownload the new software OS5 for my iPhone and after waiting the proccess to end, suddenly a message appeares saying the iphone wont restore!
after that the iphone stop working at all and not showing the home screen to me !
just it works by showiin the apple logo then a loading process that works for ever till the barrerry ends.
so please help meand can i fix it here or i have to go to a maintinace shop
thank you

Connect the charger and let it charge for at least 30 minutes before you try to turn it on. Then let it charge untill full. The iPhone (or iPad) need at least a little charge before you can turn it on.

I have An iphone 5... And when I take a picture it appear on the photo app on the middle of the screen and not on the whole screen.. How can I fix it?

I have An iphone 5... And when I take a picture it appear on the photo app on the middle of the screen and not on the whole screen.. How can I fix it?

Definitlely have it looked at. That could be a hardware deffect on the maker(apple) so there could be a definite replacement option.

SAP CRM 2007 Business role assignment

Hi all,
We are using CRM 2007. and we are trying to assign Business roles to users using the PFCG ROLE ID attribute.
1- We create a PFCG role : "pfcgrole1"
2- We create a Business Role "Businessrole1" and put PFCG Role id = "pfcgrole1"
3- assign the user to the PFCG role "pfcgrole1"
We have two cases :
CASE 1:The user is assigned to a position in Org management but the position does not have any Business roles assigned.
RESULT : The user logs in to CRM, the user gets error message "Logon is not possible because you have not been assigned a business role"
CASE 2:The user is not assigned to any position in Org management.
RESULT : The user logs in to CRM, everything works fine
my interpretation : org management has precedence over business role assignment using PFCG roles and blocks Business role assignment even if the position has no Business roles assigned
Anyone has any idea how to assign business roles using PFCG ROle ID even if the user is assigned to a position without any business roles
Thanks in advance.

Please review these old threads first:
Re: Reg: Business Role
Assignment pfcg-role to user and assignment pfcg-role to business role
There is a lot of technical background on how business role to PFCG role assignment works.
Thank you,
Stephen
CRM Forum Moderator

My Aspire 7750G does not show the login screen after upgrade to Windows 10

I have upgraded to Windows 10 on my 7750G and the update went thru smooth.But when I restart Windows it shows the windows screen with the moving dotted circle,the harddisk led stays on for a while, then starts flickering, and a blank screen is shown!After waiting - about 2 to 3 minutes - it goes directly to the lock screen, no login screen is shown.

joeboemoe,
The lock screen is where you login now, if I am not mistaken. The notebooks we have here boot to a lock screen we have to click to log in, even my PC at home does. If you want to take a look at this article we created, it might be what you are looking for.
I created a password for one of the logins on one of our notebooks and I had the option to choose Never under "If you've been away, when should Windows require you to sign in again?"

Help! My phone is not taking the whole screen! (edge around the screen)

I ve only been using my phone for less than a week. Today my phone was frozen so I hold down the home and the power button to do a reset. However, the apple logo appears and it took forever to get in the home menu so I hold down the buttons to reset the phone once again. The phone did get in the home screen after the second reboot but after that the size of the screen got smaller (Not taking the full screen) I turned off my phone and while I was under the sun i noticed that there is an edge around the screen! It is so noticable even I turned off the phone. So I used a full restore on my phone and now the edge is still there! Can anyone please tell me if they have the same problem before and know how to fix it(Like resizing the screen)? Thanks!!

Is it a thick border? or just a couple rows? Mine has that, and a lot of electronics have the same thing... they cut the size they need and only use the pixels they want/need to use.
For example I had a Zune and a new Nano that had the same thing... My Blackberry, and work cell phone... same thing.
If its a thick border, then yes call apple and get it replaced/repaired.
Message was edited by: Kalison

Outlook 2007 instead search does not show the items which are actually present in the inbox and folders

Scenario:
when user search for any particular email item by using the sender name or subject name it does not show any result. At the same time it works fine when he specify the search folder(target folder) instead of searching it across all the folders/sub-folders.
1. We tried reconfiguring the outlook profile but this not fixed the issue.
2. It is specific to only few users but so far for all the others users it works fine.
3. Restarted the “Microsoft Exchange Indexer Service” but this is also not fixed the issue.
4. Hence the outlook reconfigure not worked, rebuild the search index not tried yet, but will give a try.

Hi,
Did the user select All Mail Items scope when searching in Outlook?
In addition, please make sure the user is not searching in a shared mailbox because in some configurations, you are limited to using the
Current Folder search scope when searching in a shared mailbox.
Please also let me know the result if you have tried rebuilding index.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Apple TV3 Not Showing The Main Screen Icons except Computer

I tried to do everything that i've read in here..
I tried to unplug the power cable for 30 seconds and replug it, same problem occurs.
The Main Screen icons don't appear such as Youtube, Radio, the internet, etc..
I get the computer and settings icon only...(See picture)
/___sbsstatic___/migration-images/186/18672415-1.jpg
The internet is working just fine.. The system is up to date,
I tried resetting, restarting the system.. nothing worked..
I bought 2 Apple TV 3's and they both have the same issue..
Also, when I bought it in the U.S, the sales person in NY-5th Avenue store showed me the languages available, and one of them was the Arabic language..
Now that I bought it, this language doesn't exist.. Is there a way to add more languages?
Thanks for your time.

Welcome to the Apple community.
Unfortunately, a number of users appear to have encountered this problem. Some of these users have reported that the problem just disappears the following day or shortly after. Other users have found various other solutions to this problem.
Firstly, are you receiving any date and time errors when you turn on your Apple TV?
Check that you are properly connected to the Internet, by ensuring that you have a proper IP address and not one starting with 169. Also check that your location for the iTunes Store is set correctly, if so you might try changing it and then changing it back.
If the problem persists try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general. You should also try restarting your router, or if this doesn't work you might like to try a restore.

LastDialogtext does not show the whole file path

I am tring to get the file path for a dialog using rswapp.LastDialogtext. The value returned is shown as "M:\Regression_Tests\...\ASDERV.xls". The actual file path is "M:\Regression_Tests\SA!\SA Reports Test\ASDERV.xls". How can I get the full file path?

I am not doing anything really different when I am trying to capture that dialog. The dialog is generated when I press a button and tries to create a report. Before showing it in that dialog, it displays three other common IE dialogs Save, SaveAs and Close. All those are dismissed using Dialog Manager. This dialog is finally closed by clicking the X on the dialog. I am checking for its path before it closes using LastDialogText, which is not shown completely.
Message was edited by:
mpalivela

My BlackBerry Curve 8530 Phone does not show the home screen?

On my BlackBerry Curve 8530 Phone, I deleted an app that I did not want anymore, but when I tried to reboot the phone a few times, the screen comes up as ''App Error 200'' when it is down rebooting. What do I do? And if I have to get a new battery for my phone, where do I get one, and how much does it cost?

If the screen wont show at all, it looks like your screen has went out on the phone. Take the phone to your local service provider like sprint or at&T. These shops usually have repair guys who can try and fix it. If they cant fix it, they will have to replace the phone.
Once screens and keyboards go out on these phones (i have had a keyboard go out) they are worthless and they need to be replaced.
Unfortunately a wipe would do nothing if you cant even see the screen.

Pogo games load small does not show the whole game can not play

when i download pogo games only half the game shows i try stretching it but it is blank how do i enlarge the percentage of the game to 100% so i can play then i have uninstalled firefox and reinstalled it but the problem still exists thank you

when i download pogo games only half the game shows i try stretching it but it is blank how do i enlarge the percentage of the game to 100% so i can play then i have uninstalled firefox and reinstalled it but the problem still exists thank you

JFrame not showing the whole JPanel

Hi,
I have a JPanel with a few buttons on it(using flowlayout). I added the JPanel to a JFrame. I want to prevent the JFrame from resizing to a size which hides the buttons on the JPanel. Is there any way to do it without explicitly specifing the size of the JFrame. I want the JFrame to automatically see that all the components of the JPanel won't be displayed if it's size is reduced. Hence don't allow resize.

If you still want to resize larger (just not smaller) you could do something like this:
import java.awt.event.*;
import java.awt.*;
import javax.swing.*;
public class Resize {
    public static void main(String [] args) {
        JFrame f = new JFrame("Resize Test");
        JPanel p = new JPanel();
        p.add(new JButton("Button1"));
        p.add(new JButton("Button2"));
        p.add(new JButton("Button3"));
        p.add(new JButton("Button4"));
        p.add(new JButton("Button5"));
        f.getContentPane().add(p);
        f.pack();
        f.setVisible(true);
        final Dimension minSize = f.getSize();
        f.addComponentListener(new ComponentAdapter() {
            public void componentResized(ComponentEvent e) {
                Dimension d = ((JFrame) e.getSource()).getSize();
                if (d.width < minSize.width)
                    ((JFrame) e.getSource()).setSize(minSize.width, d.height);
}Matt

Menubar not showing the whole menu

Hi.
I have a problem with Menubar.
I use Flex SDK 3.0.0
The problem is when a child node has childs the child node
will be removed.
My XML look like this. *edit*
<menuItem label="A">
<menuItem label="A1">
<menuItem label="A11">
<menuItem label="A111"/>
<menuItem label="A112"/>
</menuItem>
</menuItem>
</menuItem>
And the result will be A-->A1-->A111
How can i do so i can see the correct result
A-->A1-->A11-->A111
When i do like this its work.
<menuItem label="A">
<menuItem label="A1">
<menuItem label="A11">
<menuItem label="A111"/>
<menuItem label="A112"/>
</menuItem>
<menuItem label="A12"/>
</menuItem>
</menuItem>
How can i do?

I was in a hurry when i wrote the post. now i have edit it so
i looks right.
But the problem is there anyway.
quote:
Originally posted by:
rtalton
I'm stumped. I tried various things and got the same results
as you.
I also tried examples in the help docs; none of them had an
example of children being nested more than two deep. Nesting three
deep (A, A1, A11), "A11" disappears on me.
btw, your example xml has the tag <menuItem
label="A111"/> twice. This is an error.
I used the following xml:
<menuitems>
<menuitem label="A">
<menuitem label="A1">
<menuitem label="A11">
<menuitem label="A111">
</menuitem>
</menuitem>
</menuitem>
</menuitem>
</menuitems>

CRM 2007 Business Role IC_AGENT not showing the whole screen

Similar Messages

Maybe you are looking for