CRM Serviceordermanagment - Configuration
Hello,
we are using SAP CRM 2007 and SAP ECC 6.0.
My question is if anybody has already set up the serviceorder in CRM with integration to R/3 logistics execution, Controlling and billing? Could anybody provide a configuration guide? We haven´t set it up yet but we plan to do this in the next weeks.
Thank you
Best regards
Manfred
Hi,
Search 'Service Order Management' in SCN.
Edited by: Neenu Jose on Apr 24, 2009 7:42 AM
Edited by: Neenu Jose on Apr 24, 2009 7:49 AM
Similar Messages
-
Regarding Material on CRM WinClinet(Configuration)
Hi All,
Kindly provide helpful links or documents on CRM WinClient Configuration.
Alternatively you can mail them to [email protected]
Thanks in Advance.
Best Regards,
KalyanHi Kalyan,
Refer to the link below:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0003b5b0-0b01-0010-c0b4-cb3178973441
Best Regards,
Pratik Patel
<b>Reward with Points!</b> -
Entire List of CRM Middleware configuration Tables needed.
Hi All, Can any one give me the entire list of all the CRM Middleware configuration Tables.
Thanks in advanceCRM Tables:
SMOFPARSFA--Middleware Parameter
SMW3FDBDOC -
BDoc Type Specific Flow
SMW3FDCUST--Customer-Specific Flow
SMW3FDSTD--Flow: Standard Configuration
R/3 Tables:
CRMRFCPAR --n Definitions for RFC Connecti
CRMPAROLTP -- CRM OLTP Parameters
CRMFILTAB -- Filter Conditions for Download -
Error in crm iviews configuration.
Hi friendz,
I installed Bussiness package for CRM 4.0. when configuring iview of eslaes and etc.. getting eror like this:
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.portal.migrated/ep_5.0/iviews/SAP%20CRM%204.0%3a%20E-Selling/com.sap.pct.crm.channelmgmt.addresschange
Component Name : com.sap.pct.crm.ChannelMgmtComponents.GenericISAComponent
com/sap/pct/crm/generics/objectLinks/ObjectLinkGenerator.
Exception id: 01:49_15/03/07_0039
See the details for the exception ID in the log file
help me out with ur ideas.
Thanks in advanceHi Aneez ,
Thanks for the replay.
The error reads : Tue Aug 29 11:07:56 GMT+05:30 2006 Name or password is incorrect. Please re-enter
Tue Aug 29 11:07:59 GMT+05:30 2006 User not authorized. Session terminated.
Here i am trying the overview page which contains the iViews
1.Today's activities.
2.My tasks.
3.My Team's Overdue Activities.
4.Activities in my resions.
Thanks
Amit -
CRM Adaptor Configuration - Get Organizations - cannot find any
I am using CRM 2013 and the Dynamics Adaptor
My understanding is that each CRM ONLINE represents a single organisation.
In any case I have not setup any CRM Organisations apart from the single instance of CRM online that I am subscribed to.
When I try to configure the adaptor I get the following message as it fails to find any organisations.
The user-id and password are correct
Any help welcome
JoeOK - I do appreciate your help.
I am making no progress !
To Review:
1. I setup a Windows Live account for
[email protected] - I can access O365 and CRM 2013 Online. This user is the system administrator in O365 and is assigned the system administrator role in CRM
2. I setup a Windows Live account for
[email protected] - this user can access O365 and CRM 2013 online. The user has been assigned the CRM role of system customizer.
3. I installed Dynamics NAV 2013 R2 on my laptop with all the required services - I can access that no problem
4. I enabled integration in NAV
5. I downloaded and installed the latest version of the "Connector for Microsoft Dynamics NAV.msi"
6. I run the Connector for Microsoft Dynamics -> Click on Adaptor Settings -> configure the connection with NAV -> Press "Test Settings" -> "Test Settings Succeeded"
7. I configure the Microsoft Dynamics CRM adaptor as follows:-
ATTEMPT #1
DOMAIN: crm.dynamics.com
User Name:
[email protected]
Password: (entered from copy and paste - ie same password always used for this user)
Port: (blank)
CRM Discovery Server: dev.crm.dynamics.com
Microsoft Dynamics Online: (box ticked)
Then click on "Configure Microsoft Dynamics CRM" -> press "Next"
CRM Discovery Server pre-populated with dev.crm.dynamics.com
CRM Online or Hosted Environment: box ticked
Domain: pre-populated with crm.dynamics.com
Account:
[email protected]
Password: (entered from copy and paste - ie same password always used for this user)
Press "Get Organizations" returns the message "Did not find any organizations" after several seconds
ATTEMPT #2
DOMAIN: crm4.dynamics.com
User Name:
[email protected]
Password: (entered from copy and paste - ie same password always used for this user)
Port: (blank)
CRM Discovery Server: disco.crm4.dynamics.com
Microsoft Dynamics Online: (box ticked)
Then click on "Configure Microsoft Dynamics CRM" -> press "Next"
CRM Discovery Server pre-populated with disco.crm4.dynamics.com
CRM Online or Hosted Environment: box ticked
Domain: pre-populated with crm4.dynamics.com
Account:
[email protected]
Password: (entered from copy and paste - ie same password always used for this user)
Press "Get Organizations" returns the message "Did not find any organizations" after several seconds
Joe -
Hi All,
I need to configure CRM Factsheet ISU_BUPA_FS in my custom business role.
Currently its visible in only one business role.
How can I make it available on other business roles.
Thanks
NikhilHi Nikhil,
For which business role this factsheet appears presently?
Just to give you pointer "Account factsheet customizing is defined under sm34 view "CRMVC_BUIL_PRT", in this customizing PDF smart forms and corresponding factsheet handler classes are registered against PFCG roles, which inturn assigned to business roles.
there could be similar view available for your requirement where we can maintain factsheet based on roles.
Cheers,
Sumit Mittal -
Hi Experts,
Could I have the configuration guide for the CRM Service...
I am looking for the document in haster....
I would like to appreciate ur help in set time...
Thanks in advance,
Manivanna prabu<a href="http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm">http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm</a>
refer C26:CRM service click that & get the configuration guide document. -
Hiding Change Button from CRM ISA Configuration!
Hi,
I have an requirement to hide the change button in ISA front end (web ISA B2B). From SAP i came to know that this can be achived from ISA configuration level. can someone assist me in this configuration part. how to approch.
Regards,
Anil.Hi Anil,
What 'Change' do you want to hide on the ISA B2B ? SAP would've suggested that it is a Extended Configuration Management (XCM) Administration setting. It could be accessed from a URL that would be something like http://yourcompany.com/b2b/admin/xcm/init.do.
Hope this helps.
Ashok. -
How to avoid configuration product downloading from R/3 into CRM
Hello,
We have CRM 4.0 connected with R/3 backEnd and configurable products are downloading from R/3 into CRM with the whole characteristics.
We don´t use this characteristics in CRM to configure this product and the pricing. Is there any way to avoid this information into CRM??
1.- Though the Middleware???
2.- Though the Uninstalling IPC(internet pricing configurator)???
3.- though the item category of the Business Transaction.???
It´d be grateful to get a way because actually, when we enter the product, this one has to be configurated because of the errors.
Thanks a lot,
Luis Angel FernándezHello Luis,
First of all I am unable to understand how are you getting the characteristic through material download.
All configuration comes through Knowledge Base and its runtime version.
If you want to block configurable materials from flowing to CRM then set the filter on Item Category Group.
I think you must have different item Category group for configurable material.
Thanks & Regards
Subhabrata -
Configuration is not copied from CRM to ECC
Hi,
We have one contract in CRM and configuration for the line items are done in CRM. Now when that contract is replicated in ECC, configuration of that line item is not copied. So when we create sales order with respect to that contract in ECC, we will have to do the configuration manually.
We have observed that the item category for the particular line item in question is active for configuration in CRM and not customized to configuration in ECC. Is it because of that the configuration is not replicated?
Please help
Thanks.the configuration (variant configuration and not customization) that is done in CRM contract is not copied to ECC contract. Is it because that item category in CRM is activated for doing the BOM configuration and the same in ECC is not activated for doing the BOM configuration?
My question is that if item category in ECC is not activated for BOM configuration then is it like that the BOM configuration in CRM will not be copied to ECC? -
Configuration is not replicated from CRM to ECC for configurable product
Hi,
We have some materials in the system for which the configuration is not replicated from CRM to ECC.
We create a quotation in CRM and configure it. In CRM, the configuration is complete and components are properly exploded but when we check the same quotation in ECC, configuration is incomplete with respect to some characteristics and product references.
Please find below finding
1. If the same material is created in another plant/company code, the configuration is replicated properly.
2. We have also checked that the BOM is completely maintained for plants for which configuration is replicated. But we dont think so it could be an issue since if we create the quotation in ECC instead of creating in CRM, for the plant (for which the configuration is not replicated from CRM to ECC), it is properly exploded and complete.
3. variant prices are replicated properly even though components are not replicated.
We need to know if we can explode the BOM in the configuration even though complete BOM for the particular plant is not maintained. If its not possible to explode, why it is possible for us to explode the BOM in the configuration in quotation.
Please advise.
Thx.the configuration (variant configuration and not customization) that is done in CRM contract is not copied to ECC contract. Is it because that item category in CRM is activated for doing the BOM configuration and the same in ECC is not activated for doing the BOM configuration?
My question is that if item category in ECC is not activated for BOM configuration then is it like that the BOM configuration in CRM will not be copied to ECC? -
WAR file and Configuration guide for CRM xMSAHH required
Hello experts,
Please provide us with the Congfiguration guide for CRM xMSAHH(Mobile Sales for Handhelds) 4.0 and CRM xMSAHH(Mobile Sales for Handhelds) 5.0.
We referred to SAP Note 788036,but the link mentioned is not valid.
http:
service.sap.com\instguides -> SAP Components -> SAP Solutions for
Mobile Business -> Mobile Sales for HH (with CRM) ->
MSA for HH 4.0 (with CRM)
Also we need a WAR file(CRM MSAHH) to run the application on Mobile Client MI2.5.
Could anyone provide us with the link or the file for the same and also the CRM backend configuration guide?
Thanks,
Himanshu LimayeHi Himanshu Limaye,
Kindly request you to have a look into the NOTE : 871779 , which basically gives all the details needed.
If still any clarification need, please revert the message back , will be ready to help
Regards,
Anand. -
Problem with Business partner flow from R/3 to CRM
Hi,
We are setting up a process to flow of Business Partners from R/3 to CRM.
We have configured PIDE correctly but the problem is when I am creating any customer in R/3 we are getting DUMP.
Kindly help me in this regards.
ThanksHi,
Check out the following Middleware Configuration :
<b>CRM Middleware configurations</b>
1. Source client for Client copy
Using t-code SCC3 in both CRM and ISU to get the source client used for client copy. Get source client for profile SAP_ALL.
2. RFC Destinations
Use t-code SM59 and check if the following RFC destinations have been created:
CRM
o R/3 Destination for CRM e.g. CRTCLNT240
o R/3 Destination for ISU e.g. ISTCLNT240
o Logical Destination for Middleware R&R queues one for current client and one for client 000. e.g. SAPCRM_MW_RR_240, SAPCRM_MW_RR_000
o TCP/IP Destination for IPC dispatcher e.g. IPC_RFC_DISPATCHER
o TCP/IP Destination for IPC server e.g. IPC_RFC_SERVER
ISU
o R/3 Destination for CRM e.g. CRTCLNT240
o R/3 Destination for ISU e.g. ISTCLNT240
3. Logical Systems
Using t-code SALE check if the following logical systems have been created:
CRM
o Own logical system e.g. CRTCLNT240
o Logical system for ISU e.g. ISTCLNT240
o Logical system for source client used in client copy e.g. CRTCLNT200
ISU
o Own logical system e.g. ISTCLNT240
o Logical system for CRM e.g. CRTCLNT240
o Logical system for source client used in client copy e.g. ISTCLNT200
Check if own logical system is assigned to the client.
Path: Sending and Receiving systems -> Logical Systems -> Assign Client to Logical System.
Convert Logical System name in application tables
Use t-code BDLS to convert logical system names in the application system.
1. Enter old logical system name retrieved in step 1. e.g. CRTCLNT200
2. Enter new logical system name e.g. CRTCLNT240.
3. Select radio button Conversion of Client-Dependent Tables and execute the transaction.
This process needs to be carried out 4 times: twice in CRM and twice in ISU.
CRM
o Old CRM logical system -> New CRM logical system. e.g. CRTCLNT200 -> CRTCLNT240.
o Old ISU logical system -> New ISU logical system. e.g. ISTCLNT200 -> ISTCLNT240.
ISU
o Old CRM logical system -> New CRM logical system. e.g. CRTCLNT200 -> CRTCLNT240.
o Old ISU logical system -> New ISU logical system. e.g. ISTCLNT200 -> ISTCLNT240.
4. Middleware Parameter tables
Use t-code SM30 to maintain middleware parameters in following tables
CRM
o Table SMOFPARSFA:
Change value for following parameter entry:
Key - R3A_COMMON
Para name - CRM_DEFAULT_DESTINATION
Value - Old ISU logical system -> new ISU logical system
E.g. ISTCLNT200 -> ISTCLNT240
ISU
o Table CRMRFCPAR:
Delete the previous entry for the following key:
User - CRM
Object name - *
RFC Destination - Old RFC destination for CRM e.g. CRTCLNT200.
Load types - All Load Types
Create new entry with following data:
User - CRM
Object name - *
RFC Destination - New RFC destination for CRM e.g. CRTCLNT240.
Load types - All Load Types
In Queue flag - X
Send XML No XML
o Table CRMPAROLTP:
Change value for following parameter entry:
Para name - CRM_DEFAULT_DESTINATION
User - CRM
Value - Old CRM logical system -> new CRM logical system
E.g. CRTCLNT200 -> CRTCLNT240
5. Admin Console (Sites and subscriptions)
Using t-code SMOEAC in CRM change attributes for the following sites.
CRM site
o Name: Change name from old CRM logical system -> new CRM logical system e.g. CRTCLNT200 -> CRTCLNT240
o Description: Change description from old CRM logical system -> new CRM logical system e.g. CRTCLNT200 -> CRTCLNT240
o Site attributes: Change RFC destination from old CRM RFC destination to new CRM RFC destination e.g. CRTCLNT200 -> CRTCLNT240
o Click on get values button to refresh logical system details.
ISU site
o Name: Change name from old ISU logical system -> new ISU logical system e.g. ISTCLNT200 -> ISTCLNT240
o Description: Change description from old ISU logical system -> new ISU logical system e.g. ISTCLNT200 -> ISTCLNT240
o Site attributes: Change RFC destination from old ISU RFC destination to new ISU RFC destination e.g. ISTCLNT200 -> ISTCLNT240
o Click on get values button to refresh logical system details.
Check if ISU site is assigned to following subscriptions.
All Business Agreements (MESG)
All Business Partner Relationship (MESG)
All Business Partners (MESG)
All Business Transactions
IS-U Connection Objects (MESG)
IS-U Contracts (MESG)
IS-U Points of Delivery (MESG)
Product Materials (MESG)
6. CRM Middleware Queues
Inbound Queues:
I. Execute transaction SMQR.
II. Change AS group from DEFAULT to parallel generators. Path: Edit -> Change AS Group
III. Register following queues:
CRM
o CSA*
o R3A*
ISU
o R3A*
Outbound Queues:
I. Execute transaction SMQS.
II. Change AS group from DEFAULT to parallel generators. Path: Edit -> Change AS Group
III. Register following queues:
CRM
o CSA*
o R3A*
ISU
o R3A*
R&R Queues:
I. Execute transaction SMOHQUEUE in CRM.
II. Check if all queues have status Released.
III. Start Queue Demon by clicking on Start Queue Demon.
<b>Please reward points if it helps.</b>
Regards,
Amit Mishra -
How to transfer CRM sales order to R/3,delivery to CRM
Hello All,
I have a basic question,just want to make sure what I am doing right.We have a business scenario where Sales Order is created in CRM and it should be replicated to R/3 for delivery and delivery should be replicated back to CRM for Billing.
Can anyone please narrate how to configure the data transfer between R/3 and CRM.
thanks,
KitchaHi Kitcha,
First of all, delivery document doesn't exist in SAP CRM, just in R/3.
The must common scenario used by SAP CRM customer is:
1. Sales Order is created in SAP CRM.
2. This order is transferred automatically to R/3, using SAP CRM Middleware.
3. A delivery document is created and a good issue is posted using the preceding sales order.
4. The Billing document is created in R/3, based on delivery document or sales order. However, as you described on your post, you want to use the CRM Billing. In this case, you just can use the sales order created on step 1.
CRM Middleware configuration:
Please take a look on SAP NOTE 490932 in order to identify all necessary configuration in order to do the data exchange of sales transacions between CRM & R/3.
Best Regards,
Gabriel Santana -
Document Migration from CRM to SAP Content Server
We are going live with SAP CRM 7.0 next week. CRM team configured some of applications like ITSM, Change Request Management and Transport Request database also as part of implementation.
We got last minute requirement that CRM team would like to go-live with current configuration with current configuration and eventually they would like to migrate all documents to Content server.
We do not have content server in place yet and planning to implement sometime in Feb. I am trying to explore ways how we can export existing documents created in CRM and migrate to Content server and link it.
Any ideas/Suggestions?
Thanks,
Miral.In which repository are the documents currently stored in CRM? Please see if Note 688241 on 'Relocating large SAP Content Server Repositories' could be of any assistance to you.
Regards,
Pradeepkumar Haragoldavar
Maybe you are looking for
-
iPad seems buggy, iMac simply not connected to syncing contacts (and focusing on it, not on Safari bookmarks either) iPad example: Two entries exist for a contact on iPad, identical or differing slightly (e.g. a space being added before a word or ide
-
how can i view my verizon email in icloud or iwerk the new invitation you send me to use this system ,i have the ipad and iph.that is ok but i have an hp pavillion using the icloud system but idont know how to see all on it especially the mail from v
-
After installing Mountain Lion on my Mac Book Pro, I can no longer access two shared drives. Diagostics cannot solve the problem. I am using Parallels to run Qucikbooks ERP on these shared drives. How do I get my Mac to see these drives and access
-
Can't find photo stream on iPhoto
When I first had my iphone in September 2012, my photos were downloaded directly to my macbook through icloud. Now, I can't seem to see the photos I took on my phone on my computer. Does anyone know why it would stop working? Do I need to update i
-
Mail rules on Mac OS X 10.6 Server
Hi, can some body help me. I wold like to create some server mail rules, that should work for all people that have an mail account on server, but i can only create for each member separatly. I would like to create new folder for junk mail and move th