Crystal Reports 2008 Runtime, Windows Server 2008 64-Bit AND SharePoint2007

Hi Guys,
here i'm again.
Well I'm developing on a 32-Bit OS with Crystal Reports 2008. I've deployed my solution to SharePoint, but when i try to call a report in the aspx-Website i get the following error:
Exception Details: CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient, or the Crystal Reports runtime is not installed correctly. Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.
Here are the technical details:
- Windows Server 2008 (64Bit)
- IIS7
- Microsoft Office Server 2008 (64Bit)
- Crystal Reports 2008 SP3
I've read, that there isn't a 64-Bit runtime version of CR2008. Then i tryed the two following suggestions i found in this forum:
1. Try to run the IIS-Application-Pool in 32-Bit-Mode -> This don't work, because SharePoint then throws a "Internal Server Error - Code 500" (no SharePoint Sites are available).
2. Try to compile the Visual Studio Project as 32-Bit -> This don't work, because SharePoint could not load the assembly
Well, are there any other hints, suggestions or experiences how i could get this to work?
Thanks in advance,
Christian
Edited by: C.Kaiser on Oct 12, 2010 5:22 PM

Hi,
I Have a Doubt Similarly which is related to the above post.....
I had created a asp.net website with sql db, Its running fine in my PC, But when i host it in my server It shows an Error like..
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load file or assembly 'CrystalDecisions.Design, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified. "
I am Using Visual Studio 2010, and my Server is Windows Server 2008 R2 32bit
I am also attaching the screenshot of the error.
Can anyone Please Help me , Its Very urgent..
Anyone Please Help Me ,,,, Its Very Urgent .......
Thanks In Advance...

Similar Messages

Crystal Reports Supported on Windows Server 2008?

Right now, we have it running on Server 2000, but server is being replaced. Would like to go with Windows Server 2008, but, making sure application compatibility first. I have searched the internets, have even called, and cannot get a straight answer.
What Windows OS does Crystal Reports support? And by support, I mean "work without glitches".

Well, there's both gated and ungated content, but Crystal Reports, Crystal Reports Server and Crystal Xcelsius should all have ungated equivalents.
It's just that not everyone on this side of the web browser has got the message.
I do regret this.
The CR2008SP1 supported platforms (ungated) is found here:
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0d494c2-696b-2b10-e8b5-e7083c7be019]
Windows 2003 is supported, and Windows 2008 is supported starting with SP1.
Sincerely,
Ted Ueda

Crystal Report 2008 on Windows Server 2008 64bit

hi,
I tried to run a Crystal Reports Web Application on a Windows Server 2008 64bit but I got this error:
"Bei der Erzeugung des Reports ist ein Fehler aufgetreten.
Der Typeninitialisierer für "CrystalDecisions.CrystalReports.Engine.ReportDocument" hat eine Ausnahme verursacht.
CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: Fehler beim Versuch, die Crystal Reports-Laufzeit zu laden.
Entweder reichen die Berechtigungen des Crystal Reports-Registrierungsschlüssels nicht aus, oder die Crystal Reports-Laufzeit wurde nicht ordnungsgemäß installiert.
Installieren Sie die geeignete verteilbare Crystal Reports-Datei (CRRedist*.msi), die die erforderliche Version der Crystal Reports-Laufzeit (x86, x64 oder Itanium) enthält. Weitere Informationen erhalten Sie unter folgender Adresse: http://www.germany.businessobjects.com/support/default.asp.
"Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: An error has occurred while attempting to load the Crystal Reports runtime.
Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information."
The System:
- Windows Server 2008 Standard 64bit SP2
- Microsoft .NET Framework 3.5 SP1
- Oracle Client 10gR2 64bit
- I tried Crystal Report 2008 Runtime, Crystal Report 2008 Runtime SP1, Crystal Report 2008 Runtime SP2, Crystal Report 2008 Runtime SP3.
- Crystal Report Basic Runtime for Visual Studio 2008 (x64)
On a 32bit-system or 32bit-mode (and 32bit Oracle Client) everything is working fine. But I have to use the 64bit Oracle Client, therefore, Crystal Report have to work in 64bit-mode.
Is it possible and what is to do to get it working, thanks,
Martin

It does work on 64 bit OS - as a 32 bit application. CR 2008 is 32 bit only.
See the article [Crystal Reports support of 64 bit Operating Systems|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d5fa88-2013-2c10-c9a5-f11963607d4e] for more info.
Ludek

Where can I download the Crystal Run Time for Windows Server 2008 64 bit ?

Hi,
Where can I download the Crystal Reports 08 RunTime for Windows Server 2008 64 bit ?
Rock
Edited by: Rock_1234 on Aug 5, 2009 9:25 AM

Thanks all for your replys.
As I know there is no Crystal Reports 2008 runtimes for 64 bit machines, there are only 32 bit runtimes for that product.So,I need to know when will be the 64 bit runtimes will be released or will be available.
Also,for the CR bundled with VS 2008 (10.5), there are 64 bit runtimes which you could find on your development machine under -
' C:\Program Files\Microsoft SDKs\Windows\v6.0A\Bootstrapper\Packages\CrystalReports10_5\CRRedist2008_x64.msi '
When will be 64 bit runtimes for CR 08 will be available?
Thanks

Crystal Reports XI - Installation on Server 2008 r2

I have moved an installation of of Crystal reports from our Windows 2000 machine onto our Server 2008 R2 machine (x64) and am having difficulties getting the program to work. It installs fine, I choose a custom install and selected all components to be installed, yet when I run it I get an error saying "Crystal Reports has stopped responding"
Is there anything I need to do to get it working in this environment?
My product is:
Msi=win32\CrystalReports.msi
ProductName=Crystal Reports XI
MsiMajorVersion=2
MsiMinorVersion=0
MsiBuildNumber=2600
TempFilePrefix=CRInstall_
ProductCode={**************************}
Thanks
Jason

See this thread for a possible solution: Crystal Reports XI stopped working error message on a Windows Server 2008
Try using the setup.exe and no the msi to install with.

Oracle Forms and Reports 10gR2 for Windows Server 2008 (64bit)

Hi!
I need to install Oracle Forms and Reports 10gR2 in a windows server 2008 64 bit machine. But I cannot find the installer of it. Is there a way to do it?
Thanks...

I need to install Oracle Forms and Reports 10gR2 in a windows server 2008 64 bit machine.Be aware that Oracle Forms and Reports 10gR2 (AS 10.1.2.0.2) is not certified for windows server 2008, as from Oracle Certification Matrices

Issues with creating PDF's (Acrobat 8.1.6. and 9.1.3) in Windows Server 2003 (32 bit) and Windows XP (64bit)

We have a report package that generates customised reports
We generate the PDF's by simply "printing" to the Adobe PDF printer
In Windows XP Pro (32 Bit) the report creates the PDF perfectly
In Windows Server 2003 (32 Bit) or Windows Xp Pro (64 Bit) the PDF is created 90% perfect but some of text has slipped on the page.
Whilst we are looking into the report writer (Dev Express) I would like to rule out any Acrobat issues.
With thanks
Mark

I think it will work fine if you use the "Enterprise" authentication option. It may have dependencies on 32 bit components. So, that's why we must run IIS in 32 bit mode even though it's on a 64 bit OS. That means CR supports 64 bit OS systems only if you bring down other components that CR uses to 32 bit levels. I'm not sure if that is considered "full support".
We are trying to use the LDAP authentication option, but that tab is disabled. Other tabs such as Active Directory and WinNT are disabled as well. There maybe another component that we must bring down to 32 bit processing.
Is there a way to enable the LDAP authentication configuration tab?
thanks

Deploy Crystal Reports 2008, VS2008, Windows Server 2008

Hi All,
I'm looking for guidance on how to deploy a web application developed on VS2008 - I've installed Crystal Reports 2008 (trial version). So in affect crystal reports is integrated in the web app.
So now I want to deploy to our web server to complete the POC.
I've no idea what I need to do to deploy. I installed my trial version of CR2008 on our server and moved the web app onto it as well. Web App running fine under IIS7. I've added the folowing to my web.config
<add assembly="CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
<add assembly="CrystalDecisions.ReportSource, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
<add assembly="CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
<add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
<add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
<add assembly="CrystalDecisions.Enterprise.Framework, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
<add assembly="CrystalDecisions.Enterprise.InfoStore, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
Is this the correct way to deploy?
I am getting the following error .... any help much appreciated
Regards,
Sinead
Server Error in '/' Application.
Invalid file name.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: Invalid file name.
Source Error:
Line 30:             }
Line 31:
Line 32:             repDoc.Load(Server.MapPath("") + "
DailyNumbers.rpt");
Line 33:             CrystalReportViewer1.ReportSource = repDoc;
Line 34:             ParameterFieldDefinitions crParameterFieldDefinitions;
Source File: c:\inetpub\wwwroot\EMS\WFDailyNumbers.aspx.cs    Line: 32
Stack Trace:
[COMException (0x800001fb): Invalid file name.]
   CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +95
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +356
[CrystalReportsException: Load report failed.]
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +419
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +894
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) +84
   WFDailyNumbers.Page_Load(Object sender, EventArgs e) in c:\inetpub\wwwroot\EMS\WFDailyNumbers.aspx.cs:32
   System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +14
   System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +35
   System.Web.UI.Control.OnLoad(EventArgs e) +99
   System.Web.UI.Control.LoadRecursive() +50
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +627

I downloaded Crystal Reports 2008 - Service Pack 3 Full Build - that wouldn't install
Downloaded Crystal Reports 2008 - Service Pack 3 - which installed successfully.
I now have ....
Crystal Reports 2008 Runtime SP2
Crystal Reports 2008 SP2
Crystal Reports 2008 SP3 Update
I found another thread similar to the error I am getting which recommended adding Everyone to the Permissions on the C:\Windows\Temp folder. With this set, when I try to navigate to the report on the web app I don't get the error as before - but the application just sits there and spins it wheels and nothing happens. When I take off this permission I am back to the previous error.
Theres nothing revealing in the eventlogs that I can see.
Do you think this could be down to IIS just not knowing what to do with a .rpt file?
In the web.config
<httpHandlers>
<add verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
</httpHandlers>
<handlers>
<add name="CrystalImageHandler.aspx_GET" verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" preCondition="integratedMode"/>
</handlers>
Regards,
Sinead

Crystal Reports 9 - Installation on Server 2008

Hi,
I have moved our installation of Crystal 9 from server 2000 on to a Server 2008 x64 r2 and am having a few little issues:
The program has installed and ran correctly, but when it goes to open a file it comes up saying:
'Failed to open the documents'
'ufmanager.dll is not found'
Then the program just sits there and doesn't open the file.
Does anyone know what we can do?

Hello,
Is this an application you wrote or are you just installing CR 9 Designer on the Server? CR 9 had no concept of 64 bit OS's so it's likely a 32 bit dependency missing that the ufmanager.dll is looking for.
If it is an application then make sure you build it for 32 bit mode only.
You could try using Process Monitor from www.sysinternals.com and see what it's looking for.
CR 9 ended it's supported life cycle a long time ago so Windows 2008 has never been tested nor will it be.
You may want to search in the Crystal Reports Developer forums on 64 bit, lots of info on how to and may solve your issue.
Good luck
Don

Crystal Report Error in Windows Server 2012 - Load Report Failed

Badly needed help regarding the above topic. Thanks in advance for helping.
We have a web application experiencing this error after deployment in WinServer 2012 IIS 8. Previously, the application was deployed in WinServer 2003 but we dont experience any errors like this. We tried searching the net for solutions and these are the following things we've try doing so far.
- Installed Crystalreportsviewer13 64 bit in Server. After that, transferred the asp_net client folder in the IIS folder same level of our application.
- We discovered that upon browsing the asp_net client in IIS itself, error 500.24 is appearing in the server. Checked the permission for folder asp_net client. Add IIS_USR permission read execute and write on the folder and still same Load Report Failed.
- Next we tried integrating the crystalreportsviewer13 inside the application same Load Report Failed error.
- Installed Service Pack 8 for CrystalReport but to no avail.
Is there any way to get the real error behind the "Load Report Failed" error? Also, is there any other way to determine what else can be done to resolve this issue? Thanks in advance.

Hi Jesse,
Use a try/catch block and see if this gives you more info:
catch (Exception ex)
MessageBox.Show("ERROR: " + ex.Message + " ;" + ex.InnerException.Message);
Response.write of course...
Make sure you have permissions set for sharing the report folder also, could be simply a permission error on the report folder.
Fiddler may give you more details also
Don

Crystal Reports & Windows Server 2008

Hi everybody,
I installed Crystal Reports 10 under Windows Server 2008 R2 (x86-64). I need this u201Coldu201D version because I still have some .NET application developed with Framework 1.1.
Unfortunately, I receive the following error: u201CSystem.NullReferenceException: Object reference not set to an instance of an object.u201D
I created a virtual directory (which point to C:\Program Files (x86)\Common Files\Crystal Decisions\2.5\crystalreportviewers10) and enabled 32-Bit Applications in the Application Pool under IIS 7.
Please notice that with the same configuration, everything works fine under Windows Server 2003.
I eventually tried to install Crystal Reports 2008, but nothing changed.
Did I miss something?
Any suggestion is appreciated.
Thanks in advance for your support,
Best regards

Hi Don,
sorry for my late reply.
Unfortunately I don't use Visual Studio. I developed my .NET applications with Borland Developer Studio 2006, which support Framework 1.1 only.
I tried to install the SP3 of Crystal Reports 2008, but no luck.
I have licensed copies both of Crystal Reports 10 and 2008.
Thank you
P.S. if I use the new version (CR 2008 SP3) of:
CrystalDecisions.CrystalReports.Engine.dll
CrystalDecisions.ReportSource.dll
CrystalDecisions.Shared
CrystalDecisions.Web
I get the following error:
"The base class includes the field 'crystalReportViewer1', but its type (CrystalDecisions.Web.CrystalReportViewer) is not compatible with the type of control (CrystalDecisions.Web.CrystalReportViewer)."
Edited by: abarone on Mar 28, 2011 12:52 PM

Problems installing Crystal Reports 2008 Server on Windows Server 2008 serv

I attempted to install the Crystal Reports 2008 product on one of our Windows Server 2008 servers.
After installing disk 1
Crystal Reports 2008 Server attempts to open up in IE...... but opens up to a blank page
http://bmlfileserver:8080/CmcApp/
anyone have any idea why? why does it not prompt for the second CD?
Is this a compatibility with Windows Server 2008?

I'm attempting to install CRS 2008 on Windows Server 2008 as well, and I'm running into a few issues. Did you ever get yours resolved? I started by trying to use IIS, but I'm uninstalling it completely now and will try Tomcat instead. Which route did you go?

Windows Server 2008 black screen with mouse *PLEASE HELP*

Hello fellow techs,
I have been tearing my hair out for the past 12hrs on this issue.
About 3 weeks ago, one of our clients reported that they were experiencing
issues on the network so one of the staff went into the server room and noticed
the screen was black with only the cursor. As they couldn't reboot, they
decided to hold the power button to power it off. When they powered it back
up, it went passed the windows loading
splash screen, and again the screen is black with
the mouse pointer in the center of the screen.
I am diagnosing the server and find that at the black screen, I’m able to move
the cursor and beyond that nothing happened. I started in safe mode with the
exact same results.
I have been trying many different solutions from posts that I have found in
Google but no change.
From other machines you can type \\servername in
the run box and see the shared folders, as well as ping it.
This is a very urgent request as I need to have the Server back up and running
by tomorrow.
I am quiet willing to pay for phone support with anyone that can assist as soon
as possible. I am happy to transfer founds via Paypal.<o:p></o:p>
PLEASE HELP!

Hi,
I agree with sm, you should give us more details. Also you should use sfc /scannow
command to scans the integrity of all protected system files and repairs files with problems when possible. For more details, please refer to the following article.
Sfc
http://technet.microsoft.com/en-us/library/ff950779.aspx
Before going further, would you please let me know whether there were any changes on the affected server? Has windows update or any new device been added? Please also check your shadow copies.
The Windows Server black screen may be caused by them.
In addition, there are similar questions, please refer to.
Windows Server 2008 black screen
http://social.technet.microsoft.com/Forums/en-US/463b529b-26a6-4d5d-88f5-7d8b3460d165/black-screen-windows-2008-r2
Windows Server 2008 and the Black Screen of Waiting
http://projectdream.org/wordpress/2009/03/03/windows-server-2008-and-the-black-screen-of-waiting/
By a way, you also can be able to boot into last know good configuration to solve the trouble. You can refer to the following similar question that provide the detailed operations.
Windows Server 2008 black screen with only the mouse pointer showing
http://social.technet.microsoft.com/Forums/en-US/5c878af8-78f2-430d-9530-a0e5ad73ff03/windows-server-2008-black-screen-with-only-the-mouse-pointer-showing
Hope this helps.
Best regards,
Justin Gu

Management Pack for Windows Server 2008 Enterprise SP1

Hello,
I tried to manage the performance of a Windows Server 2008 Enterprise SP1 (6.0.6001) but SCOM 2007 R2 just check the availability with a ping status.
I have installed the normal management packs:
On the same SCOM, I have servers with Windows Server 2008 R2 and they work perfect.
What can I do?

Hi Journey Tinoco,
Performance can be monitored by using the active alerts TAB where a alert / alerts will be triggered based on the default management pack which you have installed / imported or if you have created a custom monitor based on your preference on what performance
counter you want to monitor on windows server 2008 servers VIA SCOM.
Or you can pull server performance report specific for Windows server 2008 from the reporting TAB as per the below screen shot for details.
The one which you are opened is the health explorer view which is not showing much details.
Go to reporting TAB ===> Select Windows server 2008 operating system monitoring and then What ever appropriate report you need to pull based on your requirement. For example i have pulled a report below for "Operating system performance.
Over here Click object and select the computer name and the icon should be a Windows serve / Computer as per the icon in my screen shot below. Select the time and date from and to the report you want and dont touch the add object option. Once done click
the Run button on the left to you will get the report as below.
Please note: If the below report is what you are looking for is not available in your SCOM's reporting TAB. Then you have not installed the reporting Management pack for Windows server 2008 monitoring. Download
it from the below link.
http://www.microsoft.com/en-in/download/details.aspx?id=9296
Hope this helps you.
Gautam.75801

RAC on Windows Server 2008 R2 - which edition is necessary

Hello,
which Windows Server 2008 R2 edition is required to install RAC - standard or enterprise (NOT database edition - windows server 2008 edition)?
If we want to implement RAC 11Gr2 Enterprise Edition does the operating system also has to be enterprise edition or is it possible to install RAC 11GR2 Enterprise Edition on Windows Server 2008 Standard Edition?
What Server Version is more suited for RAC Windows Server 2003 or Windows Server 2008, and why?
Thanks in advance for any information.
kind regards
Monika Anna

Hi Monika,
which Windows Server 2008 R2 edition is required to install RAC - standard or enterprise (NOT database edition - windows server 2008 edition)?
If we want to implement RAC 11Gr2 Enterprise Edition does the operating system also has to be enterprise edition or is it possible to install RAC 11GR2 Enterprise Edition on Windows Server 2008 Standard Edition?All Oracle Database 11g Release 2 is supported on the following Windows Server 2008 R2 editions:
Windows Web Server 2008 (x64)
Windows Server 2008 Foundation (x64)
Windows Server 2008 Standard (x64)
Windows Server 2008 Enterprise (x64)
Windows Server 2008 Datacenter (x64)
What Server Version is more suited for RAC Windows Server 2003 or Windows Server 2008, and why?I recommend Windows 2008, because the system is newer and has a lot of features that do not exist in Windows 2003. Oracle 11.2 is certified in Windows 2008.
Check this note...
*Statement of Direction: Oracle Database 11g Release 2 – Microsoft Windows 7 and Windows Server 2008 R2 [ID 867040.1]*
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=ANNOUNCEMENT&id=867040.1
Regards,
Levi Pereira

Crystal Reports 2008 Runtime, Windows Server 2008 64-Bit AND SharePoint2007

Similar Messages

Maybe you are looking for