Customizing cursor positioning in the delivery

We are currently running SAP 4.6C with support pack level 48. We recently upgraded from support pack 29. Per OSS note 507967 which was applied per support pack 32, the cursor on all tabs under the Delivey Overview screen is placed on the first open lineitem's material number. Prior to this support pack update, the cursor was positioned on the first lineitem's item number field. Is there anyway we can revert back to having the cursor placed on the first lineitem's item number WITHOUT modifying the SAP code?

Hi,
Please create a OSS message reporting the problem to SAP.
You can create OSS message on the website service.sap.com.
You would need to have OSS Id to be able to report the problem to SAP.
SAP will provide another note for the problem caused due to support pack upgrade.
This is the only option other than modifying the code.
<b>Reward if helpful.</b>Thanks,

Similar Messages

[ADF Faces] set cursor position to the first column input text in ADF table

How do i set the cursor position to the first column input text when i Insert a blank row?
My idea is to implement using javascript. document.setfocus() but how do i do it from the backing bean code? or how do i install custom js to call document.setfocus()?
any ideas?
Message was edited by:
user450391

Did you try by iterating the selected row?
Bind the table with the managed bean and then try with below code:
RichTable empTable;
RowKeySet selectedEmps = getEmpTable().getSelectedRowKeys();
Iterator selectedEmpIter = selectedEmps.iterator();
DCBindingContainer bindings = (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding empIter = bindings.findIteratorBinding("EmpView1Iterator");
RowSetIterator empRSIter = empIter.getRowSetIterator();
while(selectedEmpIter.hasNext()){
   Key key = (Key)((List)selectedEmpIter.next()).get(0);
   Row currentRow = empRSIter.getRow(key);
   System.out.println(currentRow.getAttribute("Ename"));

How to get the cursor position in the text edit box?

Hi, all.
I want to get the cursor position in the text edit box
to insert some data.
But I don't know how to get.
Can someone give me some advice?
BestRegard.
Miya.

Hi Miya,
Write your own textSelectionSuite for this.
and use ITextTarget->GetRange() function.
Thanks and Regards,
Yopangjo.

Cursor position in the mx:TextInput

Hi guys, does anyone knows how to set the exact cursor
position in the mx:TextInput ? For example I want to set cursor
after the second symbol. Is that possible ?

<textinputID>.setSelection(position, position);
for example, if i want my cursor in the second position of a
textinput named "nameField":
nameField.setSelection(1,1);
*used 1 because index starts at 0

Movement type to consume customer consignment stock in the delivery plant ?

Need MM Functional expertise help to resolve the issue
They are two plants associated
1. Deliverying Plant (Customer Consignment Stock) ---> FPP
2. Recieving Plant (Vendor Consignment Stock) ---> FNT
Recieving Plant (FNT) will send a consignment Purchase Order (P0) to the delivery plant (FPP), which
inturn delivery plant FPP will do post goods Issue (PGI) with movement type 635 {635 --> moves
the stock from sloc 1000 to customer consignment stock}
Once movement type 635 is completed, it will go customer consignment stock in the delivery plant FPP
So Far OK..
Recieving plant (FNT) will recieve the stock against movement type 101K into Consignment location, followed
by movement type 411k (to move the stock from consignment location to OWN location). Once its under OWN location,
the inventory can be utilized for service orders (261)
Issue:
Not able to find a movement type to consume customer consignment stock in the delivery plant FPP
Note: 1. 411k is used to consume vendor consignment stock
2. Both plants are in different company codes
Following OSS notes has been checked, but none is addressing the issue
1. 520024
2. 610896
3. 362032
4. 13006

Customer consignment stock is consumed physically by a customer, the customer reports to you how much he has consumed, the delivering plant creates then a consignment order for consignment issue in the delivering plant, followed by converting it to a delivery and posting goods issue.

Java GUI cursor position in the window, mixed text editable and uneditable

Hello,
I primarily program in VBScript for Client Acces; but, I wanted to start creating user interfaces with Java.
VBScript is not compiled on the private drive and anyone can learn how to do a program from well documented code; however, a compiled .class Java program does not have to be sent with the .java source code to work. The compiled program is unreadable by others and uneditable by others. Although I can do what I want with ActiveX programming, I want to use Java instead because it will prevent others from knowing how I program my solutions.
The NetBeans IDE allows for controls to be dragged and dropped onto a screen; however, I want to know how to have uneditable and editable fields on the same page while allowing the cursor to be anywhere on the page and report its cursor position just as it is reported in Client Access.
Does Java support the .Net Framework; or, does it have its own objects and methods to pull the cursor position in a window? I need the row and column, not the x and y coordinates.
Java How To Program, Sixth Edition, has some deprecated code examples and I found working solutions from the Java Almanac. However, I did not see an example of this sort.
What I will do once I know how to track the cursor position in the window is generate a Java based training module. Every computer at my workplace has Java runtimes installed, none of them have the .Net Framework installed. Java has a lot of tools that allow me to replace all my ActiveX programming with Java programming.
Have a great Day!
Jesse Grune.

textArea.getCaret().getDot();
or the shorter
textArea.getCaretPosition();

How to get the index of the word at current cursor position in the word?

Dear All
I am implementing a spell checker of my native language in Word. Whenever I run spell checker it start from the first word. How can I make it to start from the current cursor position? How can I get the index of the word at the current cursor position?
Thanks in advance.
Dharam Veer Sharma

hi Dharam Veer Sharma,
Thanks for sharing the solultion with us.
It is helpful for others who have the same issue. And if you have any Office developing issue, please feel free to open a new thread.
Have a nice day.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

ITunes 6.0.1.3 "forgets" last cursor position in the library

Hi there,
I've a minor issue with my iTunes library. When I'm comfortably browsing my library using the "Browse"-Button, switching to e.g. my CD in iTunes and after that returning to the library the last cursor position with selected title and/or album is lost. So anew I've always to navigate manually to the previous selected album which it's bit annoying especially when you've to manage a larger library.
Any hints?
Thanx!
Steve
5G 60GB (European version) Windows XP
Windows XP

DEZ3124,
I want to change the default location of the music libary, so I went through the edit | preferences | consolidate library processes...which seemed to work fine.
This method will change the location of the iTunes Music folder but the the iTunes folder itself will be left behind in its original place: C:\Documents and Settings\user name\My Documents\My Music. This makes iTunes (and by extension will also make you) much happier and in this case you'll be well-advised to let it have its way.
Note that all the actual music files you now have, as well as those you will add in the future(which take up the bulk of the space on your hard drive), will be in the new location. The iTunes folder will be left behind with the iTunes Library files which don't take up much space at all ... if that's a concern.

How to control the cursor position in the Table control in Module pool

Hi,
Can any body tell me how to change the cursor positon from last field of the first record to the
first field of the second record , when user presses enter in the last field in the module pool
programming.
Thanks

Hi,
Please avoid posting duplicate posts.
Re: how to get the cursor position from screen in module pool program
Nag

How to read cursor position in the following code?

I am using reuse_alv_list_display
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
DATA:gs_selfield TYPE slis_selfield,
ok_code LIKE sy-pfkey.
CASE r_ucomm.
WHEN '&IC1'.
gs_selfield = rs_selfield.
IF gs_selfield-fieldname = 'EBELN'.
MOVE 'EVRTN' TO rs_selfield-fieldname.
SET PARAMETER ID 'VRT' FIELD rs_selfield-value.
SET PARAMETER ID 'BES' FIELD rs_selfield-value.
CALL TRANSACTION 'ME38' AND SKIP FIRST SCREEN.
ELSE.
IF gs_selfield-fieldname = 'MATNR'.
SET PARAMETER ID 'MAT' FIELD rs_selfield-value.
CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
ENDIF.
ENDIF.
ENDCASE.
ok_code = sy-ucomm.
READ TABLE it_rep_tab INTO wa_rep_tab INDEX l_selfield-value.
SET PARAMETER ID 'MAT' FIELD wa_rep_tab-matnr.
SET PARAMETER ID 'WRK' FIELD wa_rep_tab-werks.
CASE ok_code.
WHEN 'MD04'.
CALL TRANSACTION 'MD04'." AND SKIP FIRST SCREEN.
WHEN 'MMBE'.
CALL TRANSACTION 'MMBE'." AND SKIP FIRST SCREEN.
WHEN 'MD51'.
CALL TRANSACTION 'MD51' ."AND SKIP FIRST SCREEN.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDFORM.
Please help me............
but here not getting values ib l_selfield-value when I place in the toolbar.
Please help me.

you have to read your itab in a workarea yourself using the correct index using the returned rs_selfield-tabindex.
so you have allways the correct values.

Locating the cursor position

Is it possible to locate the cursor position in a text item? in other words can I find the number of characters to the left of the cursor in a text item?
I really appreciate any kind of input on this.
null

I have to insert user selected variables that show up in a LOV into the text item at the cursor position.
A sloppy workaround for this problem is asking the user to put in a pre defined symbol where ever he/she wants to insert the variables and then replace the variable with the value selected from the LOV using the REPLACE function. There is always a chance of error here!
Instead if there is a way to know the cursor position, like the no. of characters to the left of the cursor or the cursor co-ordinates.............

Can any body answer this-Want to set the cursor position in textfield.

i want my cusor position in textfield at the initial position which will come by default.
but when i'm using the textfields in an inner class i'm getting the cursor position at the end of the text in text filed.pls can any body answer this.
thanks in advance.
if want run this example.
import java.awt.*;
import java.awt.event.*;
class Testing extends JFrame implements ActionListener
     Container cnt;
     JButton jd;
     JTextField jt1;
     JTextField jt2;
     Testing()
          cnt = getContentPane();
          cnt.setLayout(new FlowLayout());
          jd = new JButton("OK");
          //jd.setBounds(50,50,100,30);
          cnt.add(jd);
          jd.addActionListener(this);
     public void actionPerformed(ActionEvent ae)
          Object but = ae.getSource();
          System.out.println("in action 00000");
          if(but.equals(jd))
               System.out.println("in action ");
               call();
               return;
     void call()
          System.out.println("in action 1111111111");
          Inner inn = new Inner();
          inn.jdlg.show();
     public static void main(String s[])
          JFrame jf = new Testing();
          jf.setSize(200,200);
          jf.show();
     class Inner
          JDialog jdlg;
          //JTextField jt1;
          //JTextField jt2;
          Container cnt;
          Inner()
               jdlg = new JDialog();
               JLabel jla = new JLabel("Label");
               jt1 = new JTextField();
               jt2 = new JTextField(5);
               cnt = jdlg.getContentPane();
               cnt.setLayout(new FlowLayout());
               cnt.add(jt1);
               cnt.add(jt2);
               jt1.setText("aaaaaaaa");
               jt2.setText("bbbbbbbb");
               System.out.println("the text "+jt1.getText());
               jdlg.setSize(200,200);

JTextFiled.setCaretPosition(0);

ALV-Grid - Get cursor position

Hi,
I replaced the table control in my dynpro with a custom container and placed an ALV-Grid in there.
So, my problem is now to get the cursor position when the user double clicks at the text in a cell.
It´s important for me to know at which position at the text he double clicked.
e.g.:
| Nr |Text   |
|----|-------|
|   1|Hello |
|   2|Test   |
The user clicks double between the 'e' and 's' at line 2 ('Test').
I need following information:
line 2
column 2
offset 3 (position, where the user clicked)
When I'm using the table control, it's no problem with
the ABAP-statement 'GET CURSOR' and property 'OFFSET',
but I didn't find a method with the same result for ALV-Grid.
Maybe you know a possibility?
Thank you.
Regards from Germany

hello,
go through these links.these links will surely solve your problem.just have a luk.
Get the cursor position row number in a table control.
upper is for table-ctrl
if you are working with alv.you can achieve it by.
call method cl_gui_control=>set_focus
exporting control = w_grid.
w_grid is ur gid name.
go through this link also
Get cursor position from grid
regards,
Shweta
Edited by: Shweta Joon on Aug 20, 2009 1:15 PM

Cursor Position without Tool Suite?

Hello,
I was wondering if anyone knows whither or not it is possible to determine the current cursor position of the current tool without using the Tool Suite.
In other words, I want to know the position of the cursor - regardless of the currently selected tool - not that of a custom tool. I hope it is possible, but I was not able to find anything...
I greatly appreciate any tips.
-jeshua

It is not possible, but it's quite easy to tap into the OS & use the AIDocumentViewSuite to translate global coordinates into document coordinates. We do something like this in our product so I can tell you it works. You just need to make sure you 'hook in' to the correct window -- namely the document window you'd like to track mouse movements in.

Cursor position on screen data in module pool programming(urgent)

Hi all,
I developed a module pool program which will save the data after scanning the barcode data.
In my program screen 100 is there which contains field 2dbar. scanned data is comming to 2dbar field.
we r doing scan 4 times.once for vendor number,once for material no. like this.
After 1st scan, vendor number will come to field 2dbar.
Then I developed logic to put comma after each scanned data come to this field 2dbar.
MODULE put_comma INPUT.
CASE OK_CODE.
when ''.
move 2dbar to 2dbar1.
clear 2dbar.
concatenate 2dbar1 ',' into 2dbar2.
*replace 2dbar with 2dbar2 into 2dbar.
move 2dbar2 to 2dbar.
*write 2dbar2 to 2dbar.
condense 2dbar no-gaps.
*move '' to 2dbar.
*set cursor field 2dbar offset 5.
*write
ENDCASE.
ENDMODULE. " put_comma INPUT
By above logic, comma comes to the starting position of 2dbar after each scan. i.e cursor position is coming to the starting position of screen field 2dbar.
Now I need to move the cursor position after the comma position on 2dbar after each scan.
after 1st scan, 2dbar contains
vmotorola
then my logic puts a comma when u put enter on screen 100.
now 2dbar contains
vmotorola,
i should get the cursor position after the comma.but i am getting cursor position before 'v'.so how to move this cursor position beyond comma after each scan.
I added set cursor command but it is not working.plz
What is the logic, I need to put in PAI to move the cursor on selection screen.
Already the logic I have mentioned. with that logic, I can put comma.now I need to add cursor movement logic to move the cursoron on screen field 2dbar.
Plz reply me as it is urgent.
Thanks in advance.
Regards
pabitra

CASE OK_CODE.
when ''.
move 2dbar to 2dbar1.
clear 2dbar.
concatenate 2dbar1 ',' into 2dbar2.
move 2dbar2 to 2dbar.
condense 2dbar no-gaps.
len = strlen ( 2dbar ).
len = len - 1.
set cursor field 2dbar offset len.
ENDCASE.
ENDMODULE. " put_comma INPUT

Customizing cursor positioning in the delivery

Similar Messages

Maybe you are looking for