Do not show total price of po in pdf print out

Dear expert,
i am going to make a print out of po but in po it shows item wise value, but not show total price at the end of item,this problem is
particularly for this po only. please help to solve this issue

Please check in table EKPO against fields NETWR, BRTWR - if the net value or gross value in this certain PO are populating or not.
Regards,
Ahmad Farhan Khalid

Similar Messages

Date not showed when report is viewed in PDF .

Hi,
We have a text field that shows the date on which the report is running.Date is not showed when report is viewed in PDF.But in HTML we can view them . Can any one help me out?
Totally there are four pages for the report.

I have observed the PDF driver iin EPM 11.1.2.x is not up-to-date and technically the Date (Text) is there just like in HTML. However, when you increase the View (Zoom in), it eventually does show up.
I have chatted with Oracle Support, and they will not address it with a patch for now.

Report Painter not showing totals for some cells

Hi,
We're developing a report painter that will give us a total of all the columns. This total uses a set of variables and a set which essentially is a grouping of the profit centers. The problem is it is not showing any value on the cell. Despite the individual accounts having some values.
Any ideas where could this gone wrong ? the set exist with the correct accounts.
I.e.
A1 A2 TOTAL (A1 + A2 - defined in set)
Depreciation 100 100 200 [ but this shows blank]

how did you solve this problem,my financial statement is not reflecting total posted depreciation even though it is reflecting the depreciation in the indididual G/L accounts.

Report does not show Quotation price

Dear friends,
What may be the reason, that my report does not show the quiotation price, though Sales order price, revenue price shows normal?
Please give some probabilities.
Rao

check your plan profile OPSB if automatic rev planning for both Quotation and Sales order is ticked

Errors not showing up in InDesign, finding them in print publication

I design a weekly newspaper. Today, and other weeks, we've had what seems to be a sporadic issue where once I finish designing my InDesign document (with no errors in preflight), and send it to our plate maker, the plate is printing a page or more with each line of text cut halfway (see photo).
For instance, this issue occurred this week on our front page, but I used the same template and same PDF preset as the week before, and last week, there were no issues, nor the week before, or week before.
My first question is, what might cause the text to print like this on the plate, but not show up as an error in the InDesign document?
Secondly, we finally worked around the issue this week by exporting the entire document as a .ps file, then converting it to a .pdf. Why would this have made a difference? More importantly, why would the export setting I've used dozens of times before only not work a handfull of times in regard to the text being cut?

Opening Balnce is not showing correctly in RG23A PART II register print

Dear All,
I am using J2I6 transaction for printing RG23A PART II register. I had maintained initially the correct Opening balances two year back in table J_2IACCBAL . But currently in register print out,, the figures coming is not matching with GL Balance .
I tried to correct Opening balances in table J_2IACCBAL and again exctrating data using J2I5 but balances as per GL is not getting corrected.
regards,
Sanjay

Hi,
Check table J_2iaccbal, whether the opening balance is updated or not. This table must have entries in order to reflect on the register.
Regards,
SAPFICO

Special offers, not showing same price on Buy Now

I have been interested in trying a Skype phone and noticed the RTX4088 in the Special Offers section as being 15% off, marked down from $117.49 to $99.87. But, when I click on Buy now, it takes me to a cart page and the price jumps to $146.86 marked down to $117.49. What gives? Skype, any help here? I wondered if it was a currency difference, but the item shows a big C next to it on the Special Offers page, that seems to match up with Canadian, as I am from Canada. And on the Buy now page it has a big C as well. So, I can't see that the currency is switching. Something doesn't seem right here with price differences, but I'm not sure what the answer is.

I don't believe Skype controls the prices merchants post. I can't verify what you are seeing from my location but I can tell you I've seen price discrepancies before. Generally I see the lowest prices by the Chat and Vision merchant. You can also buy from alternate merchants that are usually more expensive. When you go the normal route in the store you are given that option. What I believe is happening is that device is not available from the lower price merchant in your region so it defaults to the next lowest priced merchant. It's probably doing this seamlessly from the Special Offers page, thus creating the price discrepancy.

Re: Special offers, not showing same price on Buy ...

I have just tried to purchase the RTX DUALphone 4088 (Black) and its the same issue in Australia. Advertised price is $92.65 and when you go to purchase it, its $109. Can anyone tell me where i can find the contact details for Chat & Vision or even Skype Shop?
Thanks

Hello pawalshe,
I've contacted Chat&Vision and requested that you receive a response to your issue as soon as possible.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Sum function not showing total

Hi,
i have to calculate sum under the report. when i use sum function it is not displaying adding total. Please let me know. How to calcuate sum?
Thanks,
lax

The sum function will work as long as you follow the rules in XPATH (check this out: http://www.w3schools.com/xpath/xpath_examples.asp)
So, basically it depends on 1) you XML data 2) conditions for the sum.
Assuming there are no conditions and that your xml data is flat then an example would be:
<?sum(//MYVALUE)?>
This will sum all elements MYVALUE in the XML data regardless of its position in the tree.
regards
Jorge

Satellite C855-2F3 is not showing total memory

I have a Satellite C855-2F3 running win8 64bit. It has 8gb ram installed but it is currently only showing 2gb.
What could cause this/resolve this?

Sorry, yes, it was late and I was tired, problem has been solved now. I had to clean the cooling system out today and when I put the laptop back together it now shows 6gb, it may have just come lose.
Thanks.

Table will not show mutiple price values

I am unable to go beyond 152 for my property price. I want it to say 152000. This is what I put into Oracle:
SELECT *
FROM Property;
PROPERTY_NUM PROPERTY_ADDRESS PROPERTY_CITY PROPERTY_STATE PROPERTY_ZIP PROPERTY_PRICE PROPERTY_TYPE
0001 245 Benner St Philadelphia PA 19111 152 Townhome
0002 327 Silver Ave Willow Grove PA 19090 260 Duplex
0003 9243 Treaty Rd Philadelphia PA 19114 190 Single Family
0004 225 Chestnut St Philadelphia PA 19103 245 Condo
0005 511 Franklin Ave Cherry Hill NJ 08002 225 Single Family
This is my tables:
CREATE TABLE Property
(Property_Num CHAR (4) PRIMARY KEY,
Property_Address CHAR (25),
Property_City CHAR (15),
Property_State CHAR (2),
Property_Zip CHAR (5),
Property_Price DECIMAL (10,2),
Property_Type CHAR (15) );
CREATE TABLE Owner
(Owner_Num CHAR (3) PRIMARY KEY,
Property_Num CHAR (4),
Owner_Name CHAR (15),
Owner_Telephone CHAR (15) );
CREATE TABLE Inspection
(Inspection_Code CHAR (4) PRIMARY KEY,
Inspection_Type CHAR (20),
Inspection_Description CHAR (40),
Owner_Num CHAR (3),
Inspection_Date DATE );
CREATE TABLE Realtor
(Realtor_Num CHAR (2) PRIMARY KEY,
Inspection_Code CHAR (4),
Realtor_Name CHAR (30),
Realtor_Telephone CHAR (15) );
INSERT INTO Property
VALUES ('0001', '245 Benner St', 'Philadelphia', 'PA', '19111', 152000.99, 'Townhome');
INSERT INTO Property
VALUES ('0002', '327 Silver Ave', 'Willow Grove', 'PA', '19090', 260000.99, 'Duplex');
INSERT INTO Property
VALUES ('0003', '9243 Treaty Rd', 'Philadelphia', 'PA', '19114', 190000.99, 'Single Family');
INSERT INTO Property
VALUES ('0004', '225 Chestnut St', 'Philadelphia', 'PA', '19103', 245000.99, 'Condo');
INSERT INTO Property
VALUES ('0005', '511 Franklin Ave', 'Cherry Hill', 'NJ', '08002', 225000.99, 'Single Family');
INSERT INTO Owner
VALUES ('101', '0001', 'John Smith', '267-333-4667');
INSERT INTO Owner
VALUES ('102', '0002', 'Joe Taylor', '215-657-2200');
INSERT INTO Owner
VALUES ('103', '0003', 'Debra Jones', '215-745-9087');
INSERT INTO Owner
VALUES ('104', '0004', 'Frank Martin', '267-457-9300');
INSERT INTO Owner
VALUES ('105', '0005', 'Drew Hunt', '856-908-3200');
INSERT INTO Inspection
VALUES ('1001', 'Pre-Listing Check', 'Passed all eight tests', '101', to_Date('2/16/10','mm/dd/yyyy'));
INSERT INTO Inspection
VALUES ('1002', 'Walk-In', 'Property up to date on requirements', '102', to_Date('3/11/10','mm/dd/yyyy'));
INSERT INTO Inspection
VALUES ('1003', 'Appointment', 'All checks up to date', '103', to_Date('1/15/10','mm/dd/yyyy'));
INSERT INTO Inspection
VALUES ('1004', 'General Check', 'Property is in good shape to sell', '104', to_date('3/14/10','mm/dd/yyyy'));
INSERT INTO Inspection
VALUES ('1005', 'Request', 'Everything requested is up to date', '105', to_date('2/22/10','mm/dd/yyyy'));
INSERT INTO Realtor
VALUES ('01', '1001', 'Tim Simpson', '267-543-2267');
INSERT INTO Realtor
VALUES ('02', '1002', 'Bill Bradley', '215-754-2330');
INSERT INTO Realtor
VALUES ('03', '1003', 'Phil Harris', '215-742-6687');
INSERT INTO Realtor
VALUES ('04', '1004', 'Sam Brown', '267-277-5500');
INSERT INTO Realtor
VALUES ('05', '1005', 'April Young', '856-228-3550');
Can someone help me with this problem. Thank You.

Probably more to do with how you inserted the records. Please run the following commands and share with us the results.
DELETE FROM property
WHERE property_num IN ('0001', '0002', '0003', '0004', '0005');
INSERT INTO Property
VALUES ('0001', '245 Benner St', 'Philadelphia', 'PA', '19111', 152000.99, 'Townhome');
INSERT INTO Property
VALUES ('0002', '327 Silver Ave', 'Willow Grove', 'PA', '19090', 260000.99, 'Duplex');
INSERT INTO Property
VALUES ('0003', '9243 Treaty Rd', 'Philadelphia', 'PA', '19114', 190000.99, 'Single Family');
INSERT INTO Property
VALUES ('0004', '225 Chestnut St', 'Philadelphia', 'PA', '19103', 245000.99, 'Condo');
INSERT INTO Property
VALUES ('0005', '511 Franklin Ave', 'Cherry Hill', 'NJ', '08002', 225000.99, 'Single Family');
SELECT *
FROM Property;Regards,
Phiri

SAPSCRIPT-FORMPAGES does not showing total no of pages

Hi,
I want to diaplay page numbers if only pages are more than 1.so i write logic like below.
if &PAGE& ne &SAPSCRIPT-FORMPAGES&
&PAGE&
ENDIF.
but it is not working..in the first page SAPSCRIPT-FORMPAGES also contain value 1.
Can any one suggest solution.
Thanks.

Hi,
Could you please update on how did you solve this issue? here we are getting similar issue in one of the form.
Thanks.

Alternatives to "Hiearchy node does not show total of nodes & leaves"

Greetings,
I am having a problem with a query I created and am looking for suggestions on how to get around my problem. The problem is a classic one that I have seen numerous times on various discussion boards.
InfoCube Definition
Dimensions
   Material (M)
   Value Type (V)
Key Figures
   Quantity (Q)
   Amount   (A)
Restricted KF
   Actual Quantity (AQ)      {Q where V = 'A'}
   Actual Amount (AA)        {A where V = 'A'}
   Planned Quantity (PQ)     {Q where V = 'P'}
   Planned Amount (PA)       {A where V = 'P'}
Calculated KF
   Planned Cost (PC) = PA / PQ
   Planned Value (PV) = PC * AQ
The Problem
The query I wrote is reporting on Material using a hierarchy that was defined. The problem, that's a classic, is that the lower nodes of the hierarchy do not roll up to the upper node for the Planned Value (PV).
   Example:
____________AQ____AA____PV____PQ____PA____PC
   Level 1_______30___$50___$ 9___200___$60___.30
   __Level 2.1___10___$20___$ 1___100___$10___.10
   __Level 2.2___20___$30___$10___100___$50___.50
In the above example, the value for PV at Level 1 should be $11 (which is the sum of the lower nodes) and not $9 (which is the result of the calculation being performed on the Level 1 row).
Alternatives Explored
I have explored the following alternatives in order to provide a solution to this problem:
- Aggregation problems with hierarchies is documented in SAP Note 789404.
- I tried creating the CKF as a formula in the query and setting the "Calculate Result As" option to "Summation" but hierarchy nodes are not the same as result rows.
- I attempted to set the "Time of Aggregation" option in the CKF to "Before Aggregation" but because of how we are modeled I need to use a RKF in the calculation. Because of this the CKF formula is regarded as complex and therefore I do not have the option to adjust this parameter. (See Re: Incorrect Results Row)
- My last attempt was to investigate the use of Virtual Key Figures. From what I have seen, this will not provide me with the solution I need either. (See Virtual Characterstics and Key Figures)
Question
Short of changing my data model and/or calculating and storing the result in the cube, is there any other solution to my problem?
Your feedback, great or small, is much appreciated.
Thanks in advance,
Brian

EventQueu.invokeLater();From where do you call this?
We may need to see a small example code that can reproduce the problem.

HT4356 I checked everything out and had no problem printing from IPAD/MINI using the HP Photosmart 6520 printer, but the next day, using same application, my HP did not show, but was looking for the AirPrint Printer, what am I doing wrong?

Using IPAD2, IPAD MINi, HP photosmartE6520 set up on wireless network. No problem printing from my devices, but the following day, it is looking for AirPrint printer, why?

Hello lenc48,
Welcome to the HP Forums.
I see that you are having a few issues when it comes to printing from your mac as well as some two sided printing issues.
I do have a some suggestions that we can try in the attempt to troubleshoot this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Please remove the usb cable (if using wireless, disregard this step) from the printer and from the Mac and leave it disconnected until further notice.
Please click on the first link that will give you instructions on Uninstalling the Printer Software.
Once the software has been removed, please disable any anti virus protection that you may have on the Mac.
The next step we are going to take is downloading the HP Photosmart 6520 e-All-in-One Printer Full Feature Software and Drivers - OS X 10.9 Mavericks.
The installation will prompt you when to connect the usb cable (You will see a prompt for a wireless connection as well if that is the connection type you would like to use) so please do not connect the cable until prompted to do so.
If you are still having issues, feel free to write me back or you can contact HP Total care direct. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Packaged PDF not showing the navigation sidebar for individual PDFs

I've created a PDF Ebook as a Package, where individual PDFs are the chapters. My client tells me that some of the customers cannot see the left navigation panel showing all the "chapters", and therefore can only see the cover sheet PDF
I haven't been able to see if there's a setting I missed during assembly, and yet I can see the navigation panels when the file is opened in Acrobat Pro 8.1.7 and Reader 9.2.
Would this be a setting that a user needs to have turned on? Or did I not check something during final assembly and saving? I can't seem to find anything in my Acrobat Help files about this.
Thanks for any help!
David

May be that the font is not embedded in the PDF file.

Do not show total price of po in pdf print out

Similar Messages

Maybe you are looking for