EHD under snow leopard not seen under maverick

Hello Apple Community,
I've recently bought a brand new Macbook pro under Maverick. The External Hard Drive, used on my old Macbook air under snow leopard, is not recognized by Maverick. That's strange because it is seen and can be used on the other laptop, but not on the new one.
In the finder preferences, the box "show EHD" is checked.
But when I use the disk utility, it sees only the hard drive on the laptop, not the EHD...
Does anybody have a solution for this?
Thank you>

Keep the old OS around and just kick the tires and test new OS. Apple has a history and habit of breaking support in things like this.
You can use TimeMachine as one level of backup, and even there there were changes with Lion, I would always recommend foremost backup clones of every volume. And clone (SuperDuper etc) can be stored on something like HP NAS Media Server which also was supporting TimeMachine, iTunes - until Apple made that harder and more their own proprietary format.
Apple AirPort Time Capsule Support
Lion Communities
Cloning as a Backup Strategy
Rather than "upgrade" I would clone the system, and do a clean install, then allow Setup Assistant to import your files.
Others who are asking the same question:
http://www.bing.com/search?q=mac+os+x+lion+WD+My+World+NAS

Similar Messages

My app will no longer run under Snow Leopard, runs fine under Lion.

My app will no longer run under Snow Leopard, even though it was originally written for Snow Leopard. It runs fine on my Dev machine under Lion. But when I test it on my Snow Leopard Mac Mini the app starts but the window does not appear. Going to file, new window does nothing. My depolyment target is set to 10.6. Is there something I did to make my app lose Snow Leopard compatiblty?

Does your application use features only available in Lion? Are you getting any console logs?

I recently upgraded to Mavericks from Snow Leopard. Does Snow Leopard still exist on my Mac? If so, is it possible to restart under Snow Leopard in order to run PowerPC apps? If not, is there an OS available in 64 bit that supports PowerPC apps? Mav ***.

I recently upgraded to Mavericks from Snow Leopard. Does Snow Leopard still exist on my Mac? If so, is it possible to restart under Snow Leopard in order to run PowerPC apps? If not, is there an OS available in 64 bit that supports PowerPC apps? Mav ***.

The only reason I upgraded to Mavericks was because my Snow Leopard OS was 32 bit, which I was told would support only 4GB of RAM.
That wasn't quite right. You can put in as much RAM as your Mac's hardware supports. The division is in the apps themselves. A 32 bit app can't use more than 4 GB or RAM. A 64 bit app can use much more.
For example, as a 32 bit only version, Photoshop CS3 can't use more 4GB of RAM, no matter how much you actually have installed. CS4 or later can use all the RAM you want to throw at it.

I have a big problem with Lion and PGP. After upgrading from snow leopard to lion I cannot access my PGP drive which was generated under snow leopard. PGP does not start but gives a notion that lion cannot work with my PGP version. Solution?

After upgrading from Snow Leopard to Lion I cannot access a PGP drive which was generated under snow leopard. PGP does not start. When I try to start I just receive a message that Lion cannot work with PGP. How can I now access important and confifential informatio which I have stored in PGP (snow leopard). Do I have to move back to snow leopard. If so, how can I do this?

If you have this product,
http://www.symantec.com/business/support/index?page=content&id=TECH165159
you have to go back to Snow Leopard.
To re-install SL, back up your home directory, format and re-install.

Under Snow Leopard I used a WD My World NAS to back up my Mac Pro (Mid 2010). When I upgraded to Lion I am unable to access the backup because the NAS does not yet support AFP. I have now bought a Time Capsule and want to transfer the old backup onto it.

Under Snow Leopard I used a WD My World NAS to back up my Mac Pro (Mid 2010). When I upgraded to Lion I am unable to access the backup because the NAS does not yet support AFP. I have now bought a Time Capsule and want to transfer the old backup onto it.
How can I recover the NAS back up to put on my new Time Machine.
Talking to Apple Support Adviser was a waste of time on case number 239647273
Any thoughts or pointers?

Keep the old OS around and just kick the tires and test new OS. Apple has a history and habit of breaking support in things like this.
You can use TimeMachine as one level of backup, and even there there were changes with Lion, I would always recommend foremost backup clones of every volume. And clone (SuperDuper etc) can be stored on something like HP NAS Media Server which also was supporting TimeMachine, iTunes - until Apple made that harder and more their own proprietary format.
Apple AirPort Time Capsule Support
Lion Communities
Cloning as a Backup Strategy
Rather than "upgrade" I would clone the system, and do a clean install, then allow Setup Assistant to import your files.
Others who are asking the same question:
http://www.bing.com/search?q=mac+os+x+lion+WD+My+World+NAS

ITunes will not sync audio to iPad under Snow Leopard

When I try to sync audio (music and podcasts) from my MacBook Pro to my new iPad, nothing gets transferred. They are listed under the iPad heading at the left of iTunes, but have a gray chasing-arrows icon to the left of the names. (I tried to include an image, but it doesn't work.)
My contacts and calendar do get copied to the iPad.
If I boot from a different partition running Lion, with the same home folder, iTunes does sync audio files. But I'd like to get it running under Snow Leopard.

See if this article will help:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389

Final Cut Studio 2 installation hangs under Snow Leopard

I've since seen this on two machines and have filed a bug with Apple, but wanted to post to give people a heads up.
When attempting a new installation of Final Cut Studio 2 on a MacBook Pro running Mac OS X 10.6, the install hung with "about a minute remaining."
Examination of the running processes using "top" showed one thread spinning in user space using 100% of the CPU:
<pre>/Volumes/Final Cut Studio/Installer/Packages/QuickTimeMPEG2Pro.pkg/Contents/Resources/ConfigureMim eTypes -rescan -verbose</pre>
Running the same thread by hand succeeded immediately, so manually killing the spinning process seemed to have no ill effects and allowed the installation to proceed as expected.
Just to be safe I manuallly ran
<pre>/Volumes/Final Cut Studio/Installer/Packages/QuickTimeMPEG2Pro.pkg/Contents/Resources/ConfigureMim eTypes -rescan -verbose</pre>
again after disc 1 was finished installing but (obviously) while disc 1 was still in the drive.

Hello,
I fortunately came across this discussion. I want to install FCS2 on my iMac which is now running under Snow Leopard and I also got stuck at "about a minute" remaining time.
But it seems that the answer to solve this is give in an answer William has given. The only thing is, I don't get it what to do.
I typed in the word Top in Terminal I saw that it is indeed "hanging" on ConfigureMimeTypes. Through "show contents" I got to the ConfigureMimeTypes file (at least I think that is what I should do). But then...?
Another thought was, that I had to install the QuickTimeMpeg2Pro.Pkg. So I have tried that also. But then the same happens, it got stuck at "the remaining one minute issue".
Can someone please tell me what to do?
Please consider the fact that I'm not a very technical person and that english is not my native language.
Thanks a lot.
Kind regards,
Richard
Holland

Backing up an encrypted drive with Time Machine under Snow Leopard

In a nutshell, my question is “Can I back up an encrypted drive using Time Machine under Snow Leopard, and if so, how do I access its data from a previous day?”
I have a 1Tb USB drive connected to my MacBook, which runs Snow Leopard. The drive is formatted as Mac OS Extended (Journaled). This drive is included in the drives that Time Machine backs up. I used Disk Utility to create an encrypted drive on the USB drive (998Gb), also formatted as Mac OS Extended (Journaled). The encrypted drive is not on TimeMachine’s list of excluded files/drives.
When I go into Time Machine, I can see the USB drive and the encrypted drive in the side bar. I can access the files on the encrypted drive as long as I’m looking at how it stands now. But if I move backward in time, the encrypted drive is grayed out and inaccessible. If I click on the USB drive, I get a window that tells me it is 75.9Gb in size, and nothing else is available to me.
When I open the back-up drive in Finder and navigate to Backups.backupdb > macbook name > some date and time, I see my MacBook’s hard drive and the USB drive. The encrypted drive is not shown. When I click on the USB drive, I see an entry for drivename.sparsebundle. When I click on that I’m prompted for the password for the encrypted drive. When I enter it, I get a warning telling me that the disk image could not be opened and that the encrypted drive has no mountable file systems.
Is my encrypted drive really be backed-up and if so, how do I access the backed-up data?

Having received a bunch of views but no replies over the last 5 days, I decided to venture into my local Apple store and ask this same question. The response I got from the geniuses was that you can't get a reliable back-up of an encrypted drive using Time Machine under Snow Leopard. So, my only alternative is to copy the encrypted drive's contents elsewhere, unencrypt the drive, and then copy the contents back. This is what I expected, but not what I wanted to hear.

HP Officejet Pro 8500 Wireless Won't Scan Under Snow Leopard

After installing Snow Leopard, my new HP Officejet Pro Wireless 8500 all-in-one printer won't scan. It delivers the following error message: "No Scan Options - refer to device documentation".
Also, when I attempted to check and adjust scan settings using HP's Scan Destinations program, that program hangs and cannot save any setting changes. Then I have to use "Force Quit" to stop the program from hanging up while saving.
HP's software update reports the printer software is up to date.
It appears there are a ton of printer problems appearing for people after installing Snow Leopard, but I sure would appreciate any help on solutions if someone also has this problem.
Thanks much.

I also just tried connecting my 8500 wireless printer directly via usb and then downloading the HP printer drivers from Apple downloads and reinstalling.
The install hangs nearly forever on the final step, but eventually says the driver install was successful. However, then when connected via usb, I am unable to print. Printing works when you reconnect via the wireless on the 8500.
So connecting via usb and reinstalling HP printer drivers does not solve the issue. And it's puzzling, because the list of supported printers under Snow Leopard lists the Officejet Pro8500 Wireless as supporting both printing and scanning.
Somebody has it wrong.
If this scanning problem continues very long, I may be forced to uninstall Snow Leopard, because my printer is brand new.

HP OfficeJet Pro 8500 Wireless second paper tray under Snow Leopard

He there, I have a strange problem with the second (extra) paper tray from the Office Jet Pro 8500. I have setup the tray and activated the option on the driver page on the computers, but no results. No paper is loaded from the tray and there is an error that no paper is loaded in the machine. The printer is connected via ethernet (and a time machine) and I am running snow leopard on all the machines that are connected to the printer. I have installed the latest drivers from Apple and from HP. I know that the paper tray is working, because when I make a copy on the machine localy and force him to use papertray number 2, then there is no problem.
Does anybody have the same problem?? Thanks

I also just tried connecting my 8500 wireless printer directly via usb and then downloading the HP printer drivers from Apple downloads and reinstalling.
The install hangs nearly forever on the final step, but eventually says the driver install was successful. However, then when connected via usb, I am unable to print. Printing works when you reconnect via the wireless on the 8500.
So connecting via usb and reinstalling HP printer drivers does not solve the issue. And it's puzzling, because the list of supported printers under Snow Leopard lists the Officejet Pro8500 Wireless as supporting both printing and scanning.
Somebody has it wrong.
If this scanning problem continues very long, I may be forced to uninstall Snow Leopard, because my printer is brand new.

PhotoShop Elements 6 for Mac under Snow Leopard?

Hi. Apple's new operating system for Mac, Snow Leopard is being released tomorrow.
According to the Snow Leopard wiki, Photoshop Elements 6 does not work under Snow Leopard:
http://snowleopard.wikidot.com/
I contacted Adobe to ask if they had any plans to update Photoshop Elements 6 to work with Snow Leopard. The response I got from their support was that Adobe Photoshop Elements was programmed before Snow Leopard and so they weren't responsible if it didn't work.
I am pissed because of course Photoshop Elements was programmed before Snow Leopard. EVERY software program was. Most of my software (and I have a lot of apps) are being updated for Snow Leopard by their developers.
I'm writing this post just to make sure that Photoshop Elements doesn't work under Snow Leopard. It's possible whoever posted that Photoshop Elements didn't work under Snow Leopard could have been having an isolated problem.
So, if anyone tries Photoshop Elements with Snow Leopard, please post here whether or not it works.
Thanks a lot.
Mirskyman

No, there are no significant known conflicts with Snow Leopard, so that's not your problem. Have you deleted prefs since the upgrade? Was this an upgrade in place rather than an erase install? If so, go to your username>library>preferences and delete:
com.adobe.Photoshop.Elements.plist
Adobe Photoshop Elements 6 Paths Folder
Adobe Photoshop Elements 6 Settings Folder
Opera preferences
repair permissions and see if it's any better. Do you have any third party content installed in PSE? There may well be conflicts with that, if so.

Canon iP6700D Tray Choices Disappear Under Snow Leopard

I have a Canon iP6700D. In 10.5 and earlier, one could select between the automatic sheet feeder and the cassette through selections under "Quality and Media". Those options seem to have disappeared under 10.6.1 using the September 11th Canon printer driver. Nosing about in Google, others seem to have the same problem with this and other printers under Snow Leopard. I've tried uninstalling the printer and re-installing but it hasn't helped.
Settings made under 10.5 and saved still appear in Snow Leopard, and are still able to access the cassette and the sheet feeder, but I can't find a place to CHANGE that for saved or for new settings.
Can anyone tell me where to find this setting, or where I might find a patch that will fix the problem?

The v10.26 driver for the iP6700D still has the Paper Source menu under Q&M on 10.6. I can only think that something is conflicting with your installation of the driver. I would trash the contents of the BJPrinter folder, located in HD > Library > Printers > Canon. Then install the v10.26 driver again and see if the menus are present.
There were two versions of printer drivers available for 10.5, v5.8.3 and v10.xx. If you had the version 5 installed and had presets based on this driver, then they will not work correctly with the v10 driver on 10.6. You should Delete these presets and create new ones once you get the Q&M menu appearing on your install.
Final note. You should be posting this question on the Snow Leopard forum. This forum is for Leopard printing and scanning issues.
Pahu

Font problem with MX under Snow Leopard

Anybody know what might cause an app built with Director MX not to display an installed (not embedded) custom font under Snow Leopard?
The program was built quite some time ago but was tested under previous Mac OS X.x versions and worked fine. What might have changed that could cause this problem?
Complicating this is that I don't have Snow Leopard myself to test it directly, but here's what I do know:
The font is definitely installed and available to other apps.
Everything else about the app works fine.

I noticed the same jumbled text problem.
When I went to look at Font Book, I see that those fonts are no longer installed. It must've happened when I loaded Snow Leopard last weekend.
Anyway, I went to reinstall fonts, and I see I've got a bunch that got uninstalled. But when I try to reinstall them, like Calisto and Caligula to name the first couple I tried, Font Book reports that there were serious errors when trying to load them.
Does anyone have insights into the vague message: "System Validation" as the serious problem? I don't see a way to get more details about the problem than that.

HP AIO: Scan to Computer STILL missing under Snow Leopard?

Has anyone gotten any info on the status of the "Scan to Computer" and "Copy to Computer" (for reading memory card) under Snow Leopard? Being able to scan and copy files from my AIO directly to my Mac under Leopard was freaking awesome. Now I have to acquire images from the Mac (which works) and there is no way to automagically copy over files from the card reader at all.
It's a real bummer to have to use a Windows machine to do these things... Especially since it was working fine in Leopard and we've been waiting months with no work and the only HP person appears to no longer be able to post here.

Uh-huh. I beg to differ and think it is an Apple issue and an Image Capture issue in particular.
I have a nice new Epson SX610FW that is absolutely stunning in Windows Vista.
It also has Epson Scan application that does scan but Image Capture sticks and will not talk to the scanner.
Plus on Windows I can fax from the 'pooter using Epson Fax, in OS 10.5 or 10.6 no fax option is available.
I am of the opinion that print, scan and fax is broke in OS 10.6
So, in my case on a wi-fi capable all-in-one:
Windows Vista Home Premium
Scan
Print
Fax
On the device
Copy
Fax
send scan to a declared network computer (I have not tried this too thoroughly but it looks broke on OS X)
In OS 10.5
Scan
Print
no Fax
or 10.6
Scan with Epson Scan but not with Image Capture or Preview (Preview fires up Image Capture with no option to use Epson Scan instead)
Print
no Fax
Why won't OS X do Fax easily from an all-in-one - a relatively new all-in-one at that?
Interim conclusion
Image Capture is broked in OS 10.6
Fax is strange in OS X

Problem with Backup 3 (3.1.2) under Snow Leopard

Okay so I use Apple's Backup 3.1.2 which is free to all .Mac members as you know to back up all of my Macs to a NAS (networked drive). Anyway, under Snow Leopard this stops working. When you try to tell it to save the back ups on a mapped or mounted network drive it will not let you choose it and defaults back to the Macintosh HD. Under Leopard it had no problem doing this. What is interesting is that if I reinstall Backup 3 it will start to work and allow me to save to the network drive but as soon as Backup tries to do its backup by it self AND if the network drive is not mounted for some reason (has to be mounted manually), BackUp breaks the save point with the NAS and you can not tell it to save to the NAS again. As you also probably know everytime you restart your mac all the mounted network drives are not connected until you manually open them your selves. Under Leopard Backup would actually say "Waiting for Christian_BackUp" until I would open it and then it would start the backup automatically. Please help me get this working...I can not use Time Machine because I need a smooth, reliable, and working way to back up to a NAS.
Thanks for your help in advance!
PS: I have confirmed this problem on three macs all running Snow Leopard with different NAS setups.

Whenever I put my Mac to sleep Backup 3.1.2 stops running scheduled backups to my iDisk automatically. This behavior started only after I installed Snow Leopard. They always ran just fine under Leopard whether I had put my iMac into sleep mode or not. If I reboot now and never put my computer into a "hard" sleep the automatic backups work fine, but as soon as I manually select "Sleep" mode the automatic backups stop happening even if the computer is awake when the backups are scheduled to occur.
Message was edited by: Joseph Snodgrass

EHD under snow leopard not seen under maverick

Similar Messages

Maybe you are looking for