Enable access to files - permanently

I use some file manager apps on my N79 and I have to confirm access to the files every time I enter a folder and every time again when I start the app.
Is there a way to make a permanent setting for this access?

Can you access your iDisk in Finder? Is everything right in System Preferences/.Mac?
iBook G4; PowerMac G3 BlueWhite Mac OS X (10.4.7)

Similar Messages

Error on load: System.IO.IOException: The process cannot access the file : error in event viewer when users want to view documents from this third party deployed scan solution

Error on load: System.IO.IOException: The process cannot access the file
'\\server1\SCANSHARED\.pdf' because it is being used by another process.
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
   at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
   at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
I faced this error in event viewer when users want to view documents from this third party deployed scan solution
here I have two WFS servers and they configured with load balancing in F5 .
when I enable both servers in F5 I receive this error messages in 2nd server,
when users want to view documents
adil

Do you have antiVirus installed on the sharepoint servers?
These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
are uploaded.
Please follow this KB and exclude the folders from Scanning.
http://support.microsoft.com/kb/952167
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Syncing files constantly issue & page not found when trying to access a file on web

Can anyone assist with syncing issue. Syncing runs all day and new files are not syncing. I can see the files in web browser (not in desktop APP) however when I try to access the files I get page not found.
I went into archive (after reading all the forums I coudl find) and I think there are a couple of damaged files as when I tried to delete them I received an encountered 'error' and could not permanently delete.
I need assistance to get my syncing fixed, and page not found fixed.
Help!
Thanks@

There can be a number of causes for not being able to access file form web browser. One, you might be writing to wrong directory. Two, you might not have sufficient privileges to either write to directory or overwrite files already in that directory. From your description, it's the latter of the two, so you need to get a hold of creative cloud support and get file/folder permissions fixed. Good luck.

Any ideas why I can no longer access shared files on networked PC's in my office? I keep getting a "server not exist or unavailable" error.

I have been able to access the files in the past. Actually when I've had this problem before a restart has solved it. Not this time. And it keeps happening. Even more strange, Filemaker is able to access shared databases stored on the same PC's. Why can Filemaker see these computers? Both also show up in the finder but when I try to connect I get the error. I also tried "connect as" with no success. Any ideas?

Thanks Barney, I am now using pages to open exisiting Word documents. and then saving in the new format. I then trash the old incompatable (.doc) file.
This works OK, but it will be a time consuming operation to be repearted on each file that I use.
Is there any shortcut to enable sync all of the .doc files to Page?
I have not managed to recover Entourage email files . But now use Mail application, which is fine.
Encountered problems are ongoing.
I have an Epson Epson Stylus Photo Rx430 printer.
Since upgrading to OSX10.7 print files do not load to the printer. The Epson job box shows data is being sent to printer but it the task is never completed.
I take this to be a Printer Driver issue.
Today, I have been in contact with Epson Printer support, enquiring if they have any driver updates for RX430 that would be compatable with OSX10.7 Lion.
I was notified by Epson that they do not have any drivers for any of their printers for the new OSX 10.7.
How may I continue using my now unsupported Epson printer?

Auditing failed access to files and folders in Windows Storage Server 2008 R2

Hello,
I've been trying to figure out why I cannot audit the failed access to files and folders on my server. I'm trying to replace a unix-based NAS with a Windows Storage Server 2008 R2 solution so I can use my current audit tools (the 'nix NAS
has basically none). I'm looking for a solution for a small remote office with 5-10 users and am looking at Windows Storage Server 2008 R2 (no props yet, but on a Buffalo appliance). I specifically need to audit the failure of a user to access
folders and files they are not supposed to view, but on this appliance it never shows. I have:
Enabled audit Object access for File system, File share and Detailed file share
Set the security of the top-level share to everyone full control
Used NTFS file permissions to set who can/cannot see particular folders
On those folders (and letting those permissions flow down) I've set the auditing tab to "Fail - Everyone - Full Control - This folder, subfolders and files"
On the audit log I only see "Audit Success" messages for items like "A network share object was checked to see whether client can be granted desired access (Event 5145) - but never a failure audit (because this user was not allowed access by NTFS permissions).
I've done this successfully with Windows Server 2008 R2 x64 w/SP1 and am wondering if anybody has tried this with the Windows Storage Server version (with success of course). My customer wants an inexpensive "appliance" and I thought this new
variant of 2008 was the ticket, but I can't if it won't provide this audit.
Any thoughts? Any of you have luck with this? I am (due to the fact I bought this appliance out of my own pocket) using the WSS "Workgroup" flavor and am wondering if this feature has been stripped from the workgroup edition of WSS.
TIA,
--Jeffrey

Hi Jeffrey,
The steps to setup Audit on a WSS system should be the same as a standard version of Windows Server. So please redo the steps listed below to see if issue still exists:
Enabling file auditing is a 2-step process.
[1] Configure "audit object access" in AD Group Policy or on the server's local GPO. This setting is located under Computer Configuration-->Windows Settings-->Security Settings-->Local Policies-->Audit Policies. Enable success/failure auditing
for "Audit object access."
[2] Configure an audit entry on the specific folder(s) that you wish to audit. Right-click on the folder-->Properties-->Advanced. From the Auditing tab, click Add, then enter the users/groups whom you wish to audit and what actions you wish to audit
- auditing Full Control will create an audit entry every time anyone opens/changes/closes/deletes a file, or you can just audit for Delete operations.
A similar thread:
http://social.technet.microsoft.com/Forums/en-US/winserverfiles/thread/da689e43-d51d-4005-bc48-26d3c387e859
TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]

Issue while enabling Access Control for a Coherence server node

Hi
Im trying to enable access control for a Coherence server node, using the default Keystore login method shipped with Coherence. When i start the server i get the error "java.security.AccessControlException: Unsufficient rights to perform the operation". Please see below for the sequence of steps I've followed to enable access control. I just need to be enable Authentication (not authorization) at this stage
1. I have added the following entry in the Coherence Operational override file
<security-config>
          <enabled system-property="tangosol.coherence.security">true</enabled>
          <login-module-name>Coherence</login-module-name>
          <access-controller>
               <class-name>com.tangosol.net.security.DefaultController</class-name>
               <init-params>
                    <init-param id="1">
                         <param-type>java.io.File</param-type>
                         <param-value>keystore.jks</param-value>
                    </init-param>
                    <init-param id="2">
                         <param-type>java.io.File</param-type>
                         <param-value>permissions.xml</param-value>
                    </init-param>
               </init-params>
          </access-controller>
          <callback-handler>
               <class-name>com.sun.security.auth.callback.TextCallbackHandler</class-name>
          </callback-handler>
     </security-config>
2. The following is the entry in the Permissions.xml
<?xml version='1.0'?>
<permissions>
<grant>
<principal>
<class>javax.security.auth.x500.X500Principal</class>
<name>CN=admin,OU=Coherence,O=Oracle,C=US</name>
</principal>
<permission>
<target>*</target>
<action>all</action>
</permission>
</grant>
</permissions>
3. The following is the content of the Login configuration file "Coherence_Login.conf"
Coherence {
com.tangosol.security.KeystoreLogin required
keyStorePath="keystore.jks";
4. The following is the command line tag for starting the server
java -server -showversion -Djava.security.auth.login.config=Coherence_Login.conf -Xms%memory% -Xmx%memory% -Dtangosol.coherence.cacheconfig=PROXY-cache-config.xml -Dtangosol.coherence.override=FOL-coherence-override.xml -Dcom.sun.management.jmxremote.port=6789 -Dcom.sun.management.jmxremote.authenticate=false -Dtangosol.coherence.security=true -cp "%coherence_home%\lib\coherence.jar" com.tangosol.net.DefaultCacheServer %1
Following is the output on the Console when running the command. It asks for a username and password for the JKS store (If i provide the wrong password, it gives a different error, which shows that it is able to authenticate aganst the Keystore). After i put in the password, it throws the error as shown below "java.security.AccessControlException: Unsufficient rights to perform the operation"
D:\Coherence\FOL_CacheServer>fol-cache-server
java version "1.6.0_20"
Java(TM) SE Runtime Environment (build 1.6.0_20-b02)
Java HotSpot(TM) 64-Bit Server VM (build 16.3-b01, mixed mode)
Username:admin
Password:
Exception in thread "main" java.security.AccessControlException: Unsufficient ri
ghts to perform the operation
at com.tangosol.net.security.DefaultController.checkPermission(DefaultCo
ntroller.java:153)
at com.tangosol.coherence.component.net.security.Standard.checkPermissio
n(Standard.CDB:32)
at com.tangosol.coherence.component.net.Security.checkPermission(Securit
y.CDB:11)
at com.tangosol.coherence.component.util.SafeCluster.ensureService(SafeC
luster.CDB:6)
at com.tangosol.coherence.component.net.management.Connector.startServic
e(Connector.CDB:20)
at com.tangosol.coherence.component.net.management.gateway.Remote.regist
erLocalModel(Remote.CDB:10)
at com.tangosol.coherence.component.net.management.gateway.Local.registe
rLocalModel(Local.CDB:10)
at com.tangosol.coherence.component.net.management.Gateway.register(Gate
way.CDB:6)
at com.tangosol.coherence.component.util.SafeCluster.ensureRunningCluste
r(SafeCluster.CDB:46)
at com.tangosol.coherence.component.util.SafeCluster.start(SafeCluster.C
DB:2)
at com.tangosol.net.CacheFactory.ensureCluster(CacheFactory.java:998)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureServiceInterna
l(DefaultConfigurableCacheFactory.java:923)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureService(Defaul
tConfigurableCacheFactory.java:892)
at com.tangosol.net.DefaultCacheServer.startServices(DefaultCacheServer.
java:81)
at com.tangosol.net.DefaultCacheServer.intialStartServices(DefaultCacheS
erver.java:250)
at com.tangosol.net.DefaultCacheServer.startAndMonitor(DefaultCacheServe
r.java:55)
at com.tangosol.net.DefaultCacheServer.main(DefaultCacheServer.java:197)

Did you create the weblogic domain with the Oracle Webcenter Spaces option selected? This should install the relevant libraries into the domain that you will need to deploy your application. My experience is based off WC 11.1.1.0. If you haven't, you can extend your domain by re-running the Domain Config Wizard again (WLS_HOME/common/bin/config.sh)
Cappa

Microsoft Excel cannot access the file "-". There are several possible reasons. Windows Server 2008 R2 with Microsoft Office 2010

I have a problem with starting the Excel Application under a particular user (service account).
I try to schedule this C# script through an application X (not Windows Task Scheduler. And this
application will always use a service account to run services on the server). If I run the C# script in
command prompt under the same user, it runs. Under the application X, which uses the exact same
user, to initiate the C# script, it fails to open the Excel application (not sufficient permission?).
This script calls application.Workbooks.Open(<ExcelFileName>,0,false,Type.missing....). At this line
of code, it gives the following error:
Microsoft Excel cannot access the file "...". There are several possible reasons:
-The file name or path does not exist.
-The file is being used by another program.
-The workbook you are trying to save has the same name as a currently open workbook.
I tried all the methods that I found online as follow:
Create directory "C:\Windows\SysWOW64\config\systemprofile\Desktop" (for 64 bit Windows) or "C:\Windows\System32\config\systemprofile\Desktop" (for 32 bit Windows).
Changed the DCOM config for the Microsoft Excel application to include this user for Local/Remote Launch and Access.
Enabled all macros in Excel application and set the Trust Center.
Add the user to have full control on all folders that contain the Excel file.
Under DCOM
config, Microsoft Excel Application, if I modify the Identity tab to check on "This User" and enter the username/password to let Excel always run under that user. Then the application runs perfectly. However, other users can't run the excel application
on their own with the following error: "Cannot use object linking and embedding". If I check "Use the launching user", then Excel can't be launched. No errors in the logs or events anywhere to check.
Yet, still the same error. I think it's permission but I am not sure where and what to do for this to work.
Now, normally, when I run this excel report, I can double-click on the file and it'd automatically run,
save the new parameters into the current file and generate a new excel file (with date attached to the
file name). That means there is a change (save) to the original file.
Environment: Windows Server 2008 R2 and running Microsoft Excel 2010.
I appreciate all your help!

I am wondering if this has anything to do with having the user log into Excel.
In point #5 above: Under DCOM config, Microsoft Excel Application, if I modify the Identity tab to check on "This User" and enter the username/password to let Excel always run under that user. Then the application runs perfectly. However, other
users can't run the excel application on their own with the following error: "Cannot use object linking and embedding". If I check "Use the launching user", then Excel can't be launched. No errors in the logs or events anywhere to check.
Because running with the launching user proposes an user to run the Excel application. However, I do not think there is any where that we can pass in the password for this user to Excel. However, this Excel has all the permissions to Excel application as
well as the folders that have the Excel files.
Please help!
Thank you!

Can a JApplet access a file to be read?

I think I recall reading or hearing somewhere that a JApplet cannot, for "security reasons", access any files on the computer it is running on unless it is the 'original' or the one where the code is stored. What I would like to do is have a file that will be only read (not written to) by a JApplet and use the information for the applet. If I always run the JApplet with a browser on the computer where I have the code stored, will it allow me to access this file or will it still prevent me? Or can I just have the file stored in the same folder as the applet in my webpage directory so that it will be able to access it there and display it for all others on different computers?
Thanks in advance for any insights!

Hello forum,
Lot of confusion's on this topic.
Here is my understanding.The question is "Can a JApplet access a file to be read?". Answer is "No". But workaround is there.Then where the confusion is.
I have seen kartik181 mentioned about using digital signature from verisign/similar to grant access to your local file system!
The question asked by aachi is " ........Is it so? What is the purpose of digital signatures then?"
Also aachi mentioned about policy file. That means to get an access to local file is something you have to do with policy file.
bharthy explained the same in detail with some example.
Now look at the original question posted by the author littleB.
The answer I got from jdk 1.2 sand box model..
"There is no longer a built-in concept that all local code is trusted. Instead, local code (e.g., non-system code, application packages installed on the local file system) is subjected to the same security control as applets, although it is possible, if desired, to declare that the policy on local code (or remote code) be the most liberal, thus enabling such code to effectively run as totally trusted. The same principle applies to signed applets and any Java application."
So if you want to do your applet (whether you store locally or remotely in the path of webserver) you would end up an easy way of changing policy file by allowing more easily to do the specific job.
Hope it gives a bit clear picture of it.

Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Get Info' command in the Finder to ensure the file is unlocked and you have permission to access the file.

I have this massage every time close ps cc
Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder.

You may get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
If FINDER means Mac, read below (and try to give more information when asking a question)
Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0

InDesign CC, can't export to html, can't access unneeded file

In the latest build of InDesign CC (July 2014), the export process to HTML has changed. You used to be able to export a book directly to filtered HTML files. Now the option is no longer in the Book menu, and you must go through the main menu, which does not allow filtered HTML option. I keep getting a crash when I open the resulting HTML file, "Can't access .jar file from SiteBuilder,"--a Yahoo HTML creation program, which I formerly used. The book file contains only embedded jpg photo files and InDesign documents for chapters, but it calls for this unrelated and unconnected .jar file. Also, It is impossible to choose the "From Selection" option, only the "From Document" option, so I can't export the whole book into HTML, which previous versions enabled me to do.I'm stuck, and now Adobe has stopped offering phone support to subscribers. After wasting a whole day on this single issue, I'm fed up. Is it time to scrap InDesign? Also, how do you edit an e-pub file created by InDesign? (It misplaces the photo captions) Dreamwdeavce should be able to do it, but I can't figure out how. Any help would be appreciated. Peter

Export the file from ID as an .idml file and open that resaving as an.indd file with a new name. That should strip out the reference to the unused file.

Unable to access server files shares with Active Directory Users

Quick breakdown of my issue.
I have setup a Yosemite file server running the latest version of Yosemite and Server.
File sharing in Server.app is enabled and shares have been created
The server is bound to my company's Active Directory and you can directly login to the computer via AD credentials.
The big issue is this, unless the user has directly walked up to my server and logged into it at least once, they cannot authenticate to the file shares via their AD credentials.
For example: Administrator (me) I can login and access all file shares without issue.
Jane Smith (SMITH) who has actually walked up to my server and logged in via her AD credentials, can also access all file shares. (That she has access to)
John Doe (JDOE) who has not logged into the server in anyway, cannot authenticate to the server file shares at all (even though I have granted him permission) He just gets an "Access Denied" message.
I have gone into Directory Utility and changed the search order to give AD priority and this still doesn't resolve the problem.
We have unbound the server from AD and added in back again and still not able to resolve.
If you open Server.app and go to add someone from AD to a file share, it finds the AD user quickly and everything looks right. but still unable to authenticate to the server if they haven't directly logged into it before?
All of the documentation and google articles I have found say my server is setup correctly, any help would be greatly appreciate it!
Thanks in advance!

I figured this out. In Mountain Lion Server, it doesn't matter if you give the user rights to a shared file or folder, if the user doesn't have access the File Sharing service, they can't get it. I had to find the specific users in the Server app under the AD in the Users tab, and give them rights to the File Sharing service. I think you can do this for a whole AD group as well, but I haven't tried.

Remote Desktop/Access shared files over PPTP VPN

Hello,
I just bought the RV180W so I can connect to my office computer from anywhere as a VPN client. The two things I need to do while I am connected as a VPN client is to be able to access my files on my office desktop and be able to remote desktop to it as well. I have Win7 on all of my computers. Ideally, I would like to do that over PPTP VPN connection but if that is not possible I can try Cisco QuickVPN software.
I enabled PPTP on my router and created a user account. I was also able to successfully establish the connection remotely. While I was connected as a PPTP VPN client, I was able to access the Internet and my router setup page which is telling me that the connection is good. However, I was not able to either discover my office PC under my network tab in Win7 nor I was able to remote desktop. I keep my office PC on all the time and it never go to sleep. I did not create any connection policy but maybe this is the problem. Please let me know if you know of a solution.
Thanks!

Hi David,
Thank you for the response.
I was able to access the router configuration using the local IP address (in my case 192.168.1.1). I don't think I would have been able to access it using the public IP address since I have the router remote management feature disabled.
Now after reading your email, I was finally able to remote desktop and access shared files through a PPTP VPN connection. Here is what I did:
1- I separted the PPTP VPN IP address range from my DHCP range (in my case, PPTP VPN range is 192.168.1.200 to 210 and my DHCP range is from 192.168.1.100 to 199)
2- I assigned my office desktop PC that I am trying to remote desktop to a fixed IP address (192.168.1.20)
3- For remote desktop, I had to type the IP address (192.168.1.20). Typing the PC name (officepc) or searching for was not working.
4- For shared files, I had to map a network drive as //192.168.1.20/My Pictures for example. I couldn't find my PC when searched for it under Network.
After doing all that, I was able to do kinda what I wanted. Ideally, I would have liked to avoid using fixed IP addresses and be able to access computers by their name and see them under the Network tab. Is their a way to do this? I noticed that RV220W offers SSL VPN, would that help me?
I would appreciate it if you could answer my last two questions.
Thanks!
Mustafa

How do I enable "Access data sources across domains" in firefox?

Couple of links do not work on my firefox however they work fine on IE. This is because the "Access data sources across domains" is enabled in IE and i am not sure on how to make this setting enable on Firefox as well.
Please provide the steps to enable "Access data sources across domains" setting in Firefox.
Please help!

This should add the permanent exception:
[https://support.mozilla.org/en-US/kb/connection-untrusted-error-message#w_bypassing-the-warning Connection Untrusted Error Message: Bypassing the Warning]
However if it is not staying until the next time that the user opens up Firefox, is it possible that they are in permanent private browsing? [[Private Browsing - Browse the web without saving information about the sites you visit]] - that should have instructions to get in and out of it.

Some folder is empty when enabled access-based enumeration + Deduplication

Hi Everyone,
Background:
Recently we migrated the file server to win2012 r2. We have enabled dedupication and enabled access-based enumeration.
The data stored in D drive vm, so we just connected the D drive to the new 2012 r2 server. Security rights all the same as before.
Problem:
People reported that they can see their files and folders directly under their client folders, however some of the sub-folders are empty. when we checked from our file server, those sub-folder have files
inside.
We did some test, we tried to disabled access-based enumeration, checked from user shared drive and see the files are visible again inside the folder.
Has anyone experienced that before and can give me the solution?
Thanks!!
MT

Hi,
From the symptom it should related to Access Based Enumeration which means it is affected by NTFS permission settings. Please help list the NTFS permission settings on folders and an affect file.
Meanwhile you can try to create another share folder with basic NTFS permissions such as:
Domain Admins: Full Control - This folder, subfolders and files.
Creator Owner: Full Control - subfolders and files only.
A testuser group: Modify (on a specific subfolder and its files).
Everyone - Read - This folder only.
Then add the additional permissions which is added on your real shares to the test share one by one to see which one causes the issue.
If you have any feedback on our support, please send to [email protected]

Access a file physically on a remote server

Hi,
Is there any way we can access a file using the physical path on a remote server? I need to read and delete content of a remote directory on the LAN. All I got so far is access denied so I wonder if it's possible.
Here's the situation:
On a web server using IIS and Tomcat, my JSP page tries to read a distant file using a path like \\172.31.3.3\reports\file.html. Once it's read, I have to delete it.
What windows user is accessing the file? What permissions does he need?
I could access it using HTTP but the problem would be to delete it. I don't know any way to delete a file using HTTP. Any idea?
Thanks for any help,
Stephane

You can also use jcif. If the file is on a windows based computer you'll need to share the directory. If it is on a Unix/Linux based computer you'll have to install/enable samba. In either case you'll probably need a user name/password. Check out http://jcifs.samba.org/

Enable access to files - permanently

Similar Messages

Maybe you are looking for