Error 1097 occurs when i try to run my vi

hi,
i am trying to run two stepper motors simultaneously using a joystick.. i was able to do the same without any problems until i defined a threshold and sensor in order to limit the stepper motor motion.. what i wanted to do is when the value of sensor surpasses the threshold value the motor should stop. but when i try to run the vi it gives me a 1097 error at the call library function node.. i am unable to figure out the cause for that error since it occurs only when i attach the sensor and threshold formula node.
i am using labview 8.2, MID 7602, PCI 7344
for reference i am hereby attaching both VIs..
steppermotor1.vi works fine.. steppermotor2.vi does not.. i would appreciate if someone could help me out with the issue..
thanks,
vijay
Attachments:
steppermotor11.vi ‏45 KB
steppermotor21.vi ‏49 KB

Hi Vijay,
I have tried running the code that you attached on my machine, and was unable to reproduce any error. I notice that you have a Call Library Function node in your code, but there is also one in each of the motion subVIs that are called in the VI. It is possible that the error is happening at one of those. You could try placing motion error handlers at the end of each of the motion calls. You can find this by going to the Vision and Motion»NI-Motion»Error and Utility Palette. Placing this error handler here might help determine if the error is ocurring in one of the motion VIs or not.
Wes P
Certified LabVIEW Developer

Similar Messages

Why do I keep getting "an unknown error has occurred" when I try to update or add an app? I have plenty of memory left. Suggeestions?

Why do I keep getting this message "an unknown error has occurred" when I try to update or load an app. The issue is not space (memory) as I have 2/3 memory left to use. Any suggestions?

Hi ...
Installing the OS X Lion Update 10.7.3 (Client Combo) reinstalls the App Store for you which may help. Restart your Mac after the combo is installed.
It's ok to do this even though you are already running v10.7.3.
If that doesn't help, if you have anti virus software installed, disable that.
If you have an app called LIttle Snitch installed, that can prevent apps from updating.

HT1349 I have an error 4315 occurring when I try to burn music files to CD

I have an error 4315 occurring when I try to burn music files to CD.
I run a theatre school and I am trying to burn my downloaded backing tracks to CD
An error 4315 occurrs and the files do not completely burn to the CD

Video Display Information
ATI Technologies Inc., ATI Radeon X1200
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: 2443be07c9f35b3f3550180501e1e1d9
iPodService 10.2.2.12 is currently running.
iTunesHelper 10.2.2.12 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: UBHelper (2.0.0.8),
UpperFilters: NTIDrvr (1.0.0.8), GEARAspiWDM (2.2.0.1),
E: Optiarc DVD RW AD-7580S, Rev FX04
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are:   10 16 20 24.
The drive CDRW speeds are:   10.
The drive DVDR speeds are:   10.
The drive DVDRW speeds are:   10.
Force Optical Power Calibration before burn is turned on in the preferences.
The last failed audio CD burn had error code 4220(0x0000107c). It happened on drive E: Optiarc DVD RW AD-7580S on CDR media at speed 24X.

Why am i getting an error message that says "an unknown error has occured" when i try to update my apps in the app store

Can someone please offer some suggestions why I am getting an error message that says "an unknown error has occured" when I try to download or update my apps in the app store?
Thanks!
disregard! i noticed someone else's post about signing out of the app store and signing in again and it worked.....

Hi ...
Try here > Mac App Store: "An unknown error occurred (100)" when purchasing
If that doesn't help, drag the App Store icon straight up off your Dock so it goes, "poof".
Now drag the App Store icon from your Applications folder to the Dock. Try updating your apps.

IBooks for IPad 2 Unknown error has occurred when I try to download ?

iBooks for IPad 2 Unknown error has occurred when I try to download ?
Every time I try to download iBooks from AppStore it give me a unknown Error when it starts to load. Has any one else ever had this problem and any way to fix this.
Thanks

Fixed!!--Same error issue, but I hadn't downloaded any apps that required syncing. New iPad2 this Wednesday (6/15/11). Per other suggestions on this forum I tried hooking up to the laptop (already had latest iTunes loaded before my iPad2 came), iTunes started up, went to Apple iStore, login, confirm payment, try to download 'iBooks' it says I already have it. Look at the iPad and it's there.
This fix took all of 3-minutes and all is good. Now to learn to move things around. Newbie here Thanks to the forum for tips on things to try. I need to go back through documentation to see why I had such a problem. Not exactly plug-n-play, but then again, I fighting the urge to 'right-click'. Love the iPad2 so far. My first Apple-anything.

Firefox will not open on my computer, even after reinstall, with no error message or when I try to run "C:\Program Files\Mozilla Firefox\firefox.exe" -p. Help?

I recently installed firefox so I could use an adblocker. It installed just fine, and it worked just fine for about three days. Then yesterday it stopped opening. I'm on a Toshiba running Windows 7. The icon highlights when I click on it, but then it stops and won't open the browser at all. When I try to run it with the manual command "C:\Program Files\Mozilla Firefox\firefox.exe" -p, I get the error message, "C:\Program Files\Mozilla Firefox\ refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the information might have been moved to a different location." I installed it to that location, and I don't need a disk. I'm connected to the Internet just fine and my other browsers (Chrome and IE) work the same as always. But they're swamped with ads and I really was happy wih Firefox when it was opening...how can I fix this issue?

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!

Error - 1073741819 occurred when i try to print in LabVIEW

error - 1073741819 occurred when i use the "set Report font.vi" during to print in LabVIEW,but i am using the 6.1 version and not the new one, how can i solve this problem?
-attachement:
Attachments:
Print help.vi ‏112 KB

b_rani wrote:
error - 1073741819 occurred when i use the "set Report font.vi" during to print in LabVIEW,but i am using the 6.1 version and not the new one, how can i solve this problem?
-attachement:
Hi b_rani
Check this knowledgebase:
http://digital.ni.com/public.nsf/websearch/5A42F1725790DFBC86256B900075F884?OpenDocument
Hope this helps
Regards,
Manuel Wielander
NI

Error (200400) occurs when I try to connect my Mac Book Pro to Apple TV

Every time I try to connect my Mac Book Pro to Apple TV error 200400 occurs.
It connected once and functioned perfectly well. When I tried again the same error occurs. Again, and again.
What is the issue?
(My mac is new from 2012)

Are the IP addresses statically assigned (wrong ), or does the router give them out using DHCP (right )?

"Error: 3" message when I try to run Flash CS4 Pro

I have Adobe Flash CS4 Pro installed on my Windows 8 OS, and it was working fine for a while, but all of a sudden now I get a generic error message when I try to launch the application. It gives me an "error: 3" status and tells me to restart (which I have done several times) and otherwise to contact Adobe Support, who won't help me because it's not a "current version." I have also tried to "Run As Admin."
Very frustrated.

Many people have had problems when they upgraded to Win8 on a machine with an existing Adobe CS installation. (Works better on a clean Win8 machine.) This could be why you're not seeing it in Add/Remove.
Is your Flash Pro part of a CS Suite, or just a stand-alone? If part of a Suite, look for the Adobe Creative Suite listing in Add/Remove. A complete un-installation, and removal of all Adobe products, files, and folders from your machine, followed by a re-installation, might help.
Also, Flash Pro CS4 apparently installs and uses an older version of the Flash Player (10.xx), which might create conflicts with the Flash Player's current version (11.8.800.94). Make sure to uninstall Flash Player completely before attempting CS4 Flash Pro re-installation. I got an error message upon installation, but Flash Pro still works (though I uninstalled the older version of Flash Player, so the built-in de-bugger may not function).
You are correct: Adobe Support is generally useless, even when you have the current product. Forums and searches are usually your only recourse.

HELP!!!! An Internal Server Error Has Occurred when I try to redeem a gift.

When I try to redeem a 'gifted' album, I end up with a blank page with this message at the top:
An Internal Server Error Has Occurred.
When I try to "report a problem" the same page appears, even on a different computer.
When I try to "Report a Problem" in my account on iTunes, there is no field to type in my details.
I have tried to ring Apple, and they say they cannot support iTunes, and that all complaints have to go through the web site. HELP!!!!

Shirley,
Unfortunately, this is the wrong forum for you. This forum is for those of us involved with Apple's iTunes U ("University"). iTunes U is a way for colleges and universities to post content within the iTunes Store. None of us here can help you resolve a money issue with the iTunes Store, must as we'd like to. Only Duncan works for Apple ... the rest of us work for colleges and universities all over the world and we have little control over your Apple account(s).
But, to be honest, I'd be pretty shocked that a call to Apple could not help you resolve this kind of problem. Compared to other tech companies, Apple is exceptional in its phone support. If it's helpful, this page:
http://www.apple.com/support/itunes/store/gift/
has a link at the bottom you can use to contact Apple directly about gift music problems.

Error message occurs when I try to install Realtek HD Audio driver on Satellite M70

Microsoft Bus Driver should be loaded in your system before installing Realtek HD Audio Driver
This is the error message that I got when I tried to install the original Realtek drivers! Removed/installed the new WXP media center 2005, everything was fine but the modem and the sound, for the modem no problem but for the sound...(sight) I even downloaded new drivers on the internet and THEY WORKED!
But when I try next time to open my computer I get all the time a blue screen then it shuts down? What is wrong? I got everything original and I followed the step. What should I do?
By the way I got an Satellite M70 - 168 laptop.

Hi
Someone get this similar error message on his notebook OSs and according to the information the Microsoft patch should helps to sort it out.
Found this useful knowledge base article:
http://support.microsoft.com/default.aspx?scid=kb;en-us;835221
This document advice to install the KB835221 patch but that is only officially available by talking to Microsoft technical support!
But dont worry buddy. The Google search engine is the key!
Try to search for this KB835221 patch and Im sure you will find the right one!
The required UAA drivers in the Microsoft documents are not included with XP SP2 or SP1, so it's a useful QFE to have around if you want to use newer sound cards like the Realtek HD Audio.
PS: If the Q835221 didn't help then you can also try the updated driver from Microsoft Q888111 article, which has 4 versions depending on your OS and installed service pack.
Good luck!
Message was edited by: Jayjay

My ipod keeps saying that an error has occured when i try to sync it to itunes

When i try to sync my ipod touch up to my computer, the ipod syncs but i cannot get music off of my itunes account onto my ipod.

Whatis the exact wording of the error message?

Error: 148:3 when I try to run PPro CS4

Trying to open PPro CS4. Won't run & I get "Error: 148:3". This happened at the same time I had to reauthorize WinXP (can't figure out why I had to do that). Yes, it's an older system, but it does exactly what we want. Upgrading would not be cost effective for what we are now doing. I need to get this running ASAP. Or find a quality but inexpensive way to capture analog video to AVI without sync problems. Thank you all!

>quality but inexpensive way to capture analog video to AVI without sync problems
What hardware do you use in the digitizing process?
I have NOT used either, but many say to try these for SD capture http://windv.mourek.cz/ or http://www.exsate.com/products/dvcapture/
I have NOT used it, but many say to try this for HDV capture
-archived at http://www.videohelp.com/tools/HDVSplit
-Click the 1st link under "Download sites:" for the latest version

TS3694 I get unknown error (6) occurred when I try to restore ipad2

My daughter iPad would turn on and say it needed to be activated and then give us a developer error of some type. so we attempted to restore it. now get a unknown error (6) when it is almost done with restore. What are me options to get past this? What is a error (6)?

Were you running iOS 7 beta? If so, as a developer you need to log into the Developer forum for assistance.
Not a developer and running iOS 7 beta? Then you've stolen Apple's software and will receive absolutely no assistance from this forum. Enjoy your iBrick!

Why do I get Error-22011 when I try to run a HW Watchdog Timer vi?

I am trying to use the HW watchdog timer vi's on the RT functions palette (Watchdog Configure.vi and Watchdog Clear.vi). Error-22011 is generated when Watchdog Open.vi is called (a subvi to Watchdog Configure.vi).
"Explain Error" gives this result:
"NI-Watchdog: The watchdog hardware you requested is already in use, or has been permanently locked."
I get this error every time I execute Watchdog Configure.vi even if the host computer and network controller have just been rebooted. There is no place to specify or lock/unlock the hardware (that I can find). I'm using Windows XP, LV8.5, and the FP2010 controller.
Thanks in advance for any help.
pmac

Yes, I have NI-Watchdog 2.1.5 installed on my FP.
In fact, I figured out what the Error-22011 problem was all about and I'm almost too embarrassed to say. I had Watchdog Configure.vi inside a while loop... so only the first iteration would be error free and for every iteration after that, the hardware would be "already in use". Hence, Error-22011.
I've made it over that hurdle, but I'm still having problems.
Now,I have both Watchdog Configure.vi and Watchdog Clear.vi outside the while loop and I put Watchdog Whack.vi inside the while loop (mainly to monitor the watchdog status output). I also wired the occurrence output of Watchdog Configure.vi to a second while loop in which there is a wait for occurrence.vi wired to a boolean indicator.
If I disconnect the ethernet cable while this vi is running, the program pauses and I get a Labview generated message informing me of a lost connection however, there is no occurrence generated and the watchdog stays in "running" status.
Apparently, I've misunderstood how to implement the watchdog vi's and I'll need someone to set me straight.
Is there anyone who can help?
Thanks,
pmac

Error 1097 occurs when i try to run my vi

Similar Messages

Maybe you are looking for