Error Deploying Business Rules (connection information could not be found)

Hello experts,
When I try to deploy the Business Rules I'm getting the following error:
"Deployment was not successful.
Rule was validated with no errors.
The rule could not be validated against the deployed application as connection information could not be found"
When I create a new Business Rule I can't associate the Business Rule to the form and I think it's because the deploy wasn't successful.
I would apreciate your help about this issue.
Regards,
Rodrigo

Hello,
We already tried to make some changes in order of dimensions but the problem persists.
We didn't change the order of dimensions, so I think itsn't due to that.
In the Production environment with the same application we don't have any error ... so ideas about this issue are lacking!
Regards,
Rodrigo

Similar Messages

Error in File ****.rpt: The table could not be found in

Hi ,
I have a Crystal Report which uses a stored procedure to get it's data.
The stored procedure has no parameters but it is pretty complex and gives a resultset in the end with a select statement.
I designed the report in CR 11.5.12.1838.
The report works perfect in crystal reports designer.
Unfortunately I am getting an error in Central Management Concsole and InfoView
The error is:
Error in File ****.rpt: The table could not be found.
I am using ODBC connection and I even used to sa credentials to run the report in CMC but had no luck.
One thing I should mention that the stored procedure name as ;1 in the end.
I appreciate if you could help me with this report
Thanks

The SQL profiler RPC completed shows:
exec sp_tables N'My[_]Procedure [_]Name[_]Has[_]Underscores,N'%',NULL,NULL
and it's variations. Nothing else and that returns no result.
My procedure name has underscores, I will get rid of that.
I will recreate my Stored procedure without underscore or any special characters and let you know about the result
Umit

Error #1014: Class flash.media::MicrophoneEnhancedOptions could not be found.

Hi,
I'm trying to build a mobile app, that is using a webcam, text/audio chat. The web cam and the text chat is working fine with me, I even tried the whiteboard and it was working. Once I tried to add the Audio part I got this error:
"Error #1014: Class flash.media::MicrophoneEnhancedOptions could not be found.
at com.adobe.rtc.clientManagers::MicrophoneManager/get selectedMic()[/Users/smagee/flashfarm/connect/cocomomobile/src/com/adobe/rtc/clientManage rs/MicrophoneManager.as:169]...."
I tried several swc file but still getting the same error. Any help or tips how to solve this issue?
Is there a Mobile SDK version will be release soon?
Many thanks
Suha

Hi, Suha
As the release notes state, you must be compiling to AIR 2.7. I believe that
the error you are seeing is a result of targeting AIR 2.6.
Please see the instructions helpfully provided here:
http://forums.adobe.com/message/3847495#3847495
(also note that you must add the following to your Flex Compiler settings:
-swf-version=12
Thanks
sasha

VerifyError: Error #1014: Class flash.media::MicrophoneEnhancedOptions could not be found.

Hi
In the adobe help there is much talk about AEC and sample codes for AEC.
I have downloaded flex sdk 4.5 ,AIR SDK 2.6 which are most recent builds.Installed Flash player 10.3 and AIR runtime 2.7 release candidate.
While using the following code for echo supression:
var mic:Microphone = Microphone.getEnhancedMicrophone();
mic = Microphone.getEnhancedMicrophone(0);
var options:MicrophoneEnhancedOptions = new MicrophoneEnhancedOptions();
options.mode = MicrophoneEnhancedMode.FULL_DUPLEX;
options.autoGain = false;
options.echoPath = 128;
options.nonLinearProcessing = true;
mic.enhancedOptions = options;
the following error occurs both in Web version as well as AIR version.
I have included the playerglobal.swc in both the version of applications in the folder frameworks\libs\player\10.3
In both case it is giving the following error:
[SWF] AudioChatClient_1.swf - 2,683,701 bytes after decompression
typecheck AudioChatClient_1/startPubishing()
   outer-scope = [global Object$ flash.events::EventDispatcher$ flash.display::DisplayObject$ flash.display::InteractiveObject$ flash.display::DisplayObjectContainer$ flash.display::Sprite$ mx.core::FlexSprite$ mx.core::UIComponent$ spark.components.supportClasses::SkinnableComponent$ spark.components.supportClasses::SkinnableContainerBase$ spark.components::SkinnableContainer$ spark.components::Application$ spark.components::WindowedApplication$ AudioChatClient_1$]
                       [AudioChatClient_1~[O] *[A] *[A]] {} ()
0:debugfile "D:\ECLIPSE_WORKSPACE\FLASH_BUILDER\AudioChat\src;;AudioChatClient_1. mxml"
                       [AudioChatClient_1~[O] *[A] *[A]] {} ()
2:debugline 54
                       [AudioChatClient_1~[O] *[A] *[A]] {} ()
4:getlocal0
                       [AudioChatClient_1~[O] *[A] *[A]] {} (AudioChatClient_1~[O])
5:pushscope
                       [AudioChatClient_1~[O] *[A] *[A]] {AudioChatClient_1~[O]} ()
6:pushnull
                       [AudioChatClient_1~[O] *[A] *[A]] {AudioChatClient_1~[O]} (null[O])
7:coerce flash.media::Microphone
                       [AudioChatClient_1~[O] *[A] *[A]] {AudioChatClient_1~[O]} (flash.media::Microphone[O])
9:setlocal1
                       [AudioChatClient_1~[O] flash.media::Microphone[O] *[A]] {AudioChatClient_1~[O]} ()
10:pushnull
                       [AudioChatClient_1~[O] flash.media::Microphone[O] *[A]] {AudioChatClient_1~[O]} (null[O])
11:coerce flash.media::MicrophoneEnhancedOptions
VerifyError: Error #1014: Class flash.media::MicrophoneEnhancedOptions could not be found.
    at AudioChatClient_1/__pub_btn_click()[D:\ECLIPSE_WORKSPACE\FLASH_BUILDE R\AudioChat\src\AudioChatClient_1.mxml:144]
My system specifications are:
OS: Microsoft Windows XP SP3
Intel Core 2 duo Processor with 2 GB RAM
Flash Builder 4.0
If possible could you provide the information of AIR SDK 2.7
Thanks
Sudhansu Sekhar Rana

Hi
me to...
While using the following code for echo supression:
var options:MicrophoneEnhancedOptions = new MicrophoneEnhancedOptions();
VerifyError: Error #1014: 无法找到类 flash.media::MicrophoneEnhancedOptions。
OS: Microsoft Windows XP SP3
Intel Core 2 duo Processor with 2 GB RAM
Flash Builder 4.5
Adobe Flash Player 10.3
Adobe Flash Media Server 3.5.2
10.3 playerglobal.swc
If who have already solved the method, please point out bottom.
     Thanks
QQ:52275313
Email:[email protected]

O/S-Error: (OS 126) The specified module could not be found.

i get this error in my vb6.0 application...
"O/S-Error: (OS 126) The specified module could not be found.
ROW-00054: Cannot load the library"
Assuming my connection is fine...
DB is oracle 9.2.0.4 patch installed,MDAC 2.8,VB6.0
My code snipped goes like this...
conn.Open "Provider=OraOledb.Oracle;User ID=test;Password=test;DATA SOURCE=oracle.world;UseSession Format=1"
objADOCommand.CommandText = "select * from wfmuser"
objADOCommand.ActiveConnection = conn
adorec.CursorLocation = adUseClient
objADOCommand.Properties("IRowsetChange") = True
objADOCommand.Properties("Updatability") = 7 ' Insert, Delete and Update
Set adorec = objADOCommand.Execute
it gives me the error upon execution of above line.
i have reinstalled the OLEDB provider,as well as MDAC.
but of no help...
i have even cheked my OS path for oraHome entry.
please respond ASAP...i am stuck.

Searching the web for "loadlibrary failed with error 126 java" seems to point to issues with OpenGL and certain video drivers and/or environments with multiple monitors. Here are several discussions...
https://netbeans.org/bugzilla/show_bug.cgi?id=243153
Error "LoadLibrary failed with error 126: The module could not - Microsoft Community
[SOLVED] Issue with Technic Launcher: Load Library failed with Error 126 - Technic Launcher - Technic Forums
So it seems this issue is not specific to SQL Developer. The last discussion includes a video link in its last post saying that ".dll" is searched for rather than "atioglxx.dll" on 32-bit systems or "atio6axx.dll" on 64-bit system (in the C:\Windows\system32 folder), so a workaround is to copy one of those to ".dll".

I'm trying to use import com.adobe.crypto.* on Windows version of my App but get error 1172:Definition com.adobe.crypto could not be found

The Mac version of my Air app works fine, so does the iPad version, but the PC version has been a bit of a nightmare.
I keep getting the error "1172:Definition com.adobe.crypto could not be found", when I publish it.
Basically the 'com' folder is in the same directory as the app I am publishing and within that is 'adobe' and within that is 'crypto' within that is a series of .as files.
I've added C:\Users\Gary\Documents\My_Applications\My_App_folder\com\adobe\crypto to source path list (I have no idea if that's right).
But that just gives me a different error 5001: The name of package com.adobe.crypto does not reflect the location of this file. Please change the package definitions name inside the file.......
I didn't have to include this source in the Mac version... but someone seemed to suggest it on a forum.
I'm basically stabbing in the dark at the mount, something I seem to be doing a lot of these days. :-(
Any help would be greatly appreciated.
Many Thanks
Gary

I've figured it out
Turns out I needed to add a source path (in the Actionscript 3 settings click on the Source File Tab) that exactly matches the directory the app and com folder is inside of. I wrongly assumed that Adobe Air could figure out where it was for itself, but no.... it needs to be told where to look for the com folder even though it's staring it right in its face. (Don't set the path to the 'com' folder itself, but to the enclosing folder that the .fla and the com is in).
The Mac version doesn't seem to need that, it just finds the com folder if it's inside the same folder.
Now I've got another massive error:-
When I test the app, it works fine sending to Air for Desktop, however when I publish with embedded runtime for Windows.... It comes up with this error.
Any ideas ?

I can't get dvds to play "There was an initialization error. A valid video device could not be found for playback. [-70017] Anybody know how to resolve this?

I can't get dvds to play and, instead, get "There was an initialization error. A valid video device could not be found for playback. [-70017]" I went in for a Genius appt Friday and it played for the tech...but now I'm back home (one and a half hours from the store) and I'm getting the error message again when I try to load a dvd. Any recommendations?

Hello, try this...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
Reboot... any change?

Help please! error code: a valid dvd drive could not be found [-70012]

Hi,
Although I am able to play cds and bootable discs, I am unable to play dvds on my LaCie d2 DVD-RW Firewire Drive. I get an error code:
a valid dvd drive could not be found -70012
Is anyone able to help? I did see one other post listed with this error code, but that person's results seem to be no longer valid, with outdated links for patches.
Thanks,
George

It's possible that you caused some damage by not "properly" doing the firmware update, but drives with bad firmware typically just don't work, period. Unfortunately, LaCie does not keep the older firmware posted on their site so that you could 'back-flash' the drive to an earlier firmware revision and then re-apply the updated firmware.
If you have access to a PC that you could put the drive into (as in, removed from the LaCie external enclosure) and know the drive type (the NEC ND-35xx is the most common) you could find older firmware and flashing utilities for the PC, flash the drive to one of those and then drop it back into the LaCie enclosure and flash it back to the current LaCie firmware. No guarantees this will work, though, and you may end up with a totally dead drive.
-Douggo

Error log 'At least one entry could not be found in object buffer' in SLG1

Hi Experts,
We are getting error log 'At least one entry could not be found in object buffer' in SLG1 transaction.
Unable to trace the source of error. Could you please help us identifying the same.
Regards,
Santosh Kacham

Hello,
the reason could be the use of order_save badi, mostly there is a wrong + faulty implementation which causes this error. Please check first if any own coding part is involved, when creating documents / tickets.
Thanks + regarsd
Rene

Error 445: The Credential Security Service could not be found:

Hello,
We are trying install Adobe LifeCycle Reader Extensions 6.1 on WebSphere 5.1. But when we access the web page: http://hostname:9080/ares, upload a file, click next, web page generate an error:
An Error Has Occurred
Error 407: An unexpected internal error occurred: 'java.lang.IllegalStateException: javax.servlet.ServletException: Error 474: The credential permission settings could not be processed: 'com.adobe.solutions.ares.ARESException: Error 445: The Credential Security Service could not be found: 'javax.naming.NameNotFoundException: Context: ISDAPP15/nodes/ISDAPP15/servers/server1, name: /ejb/com/adobe/solutions/credentialsecurity/CredentialSecurity: First component in name CredentialSecurity not found. [Root exception is org.omg.CosNaming.NamingContextPackage.NotFound: IDL:omg.org/CosNaming/NamingContext/NotFound:1.0]'.'.'.
I check Adobe website, there is one article (http://www.adobe.com/support/products/enterprise/knowledgecenter/c4690.pdf). But the solution in this article does not work for me.
Any help will be appreciated.
Thanks,
Grace

Well ticket system seems slower.
samsung |
kadın |
saç modelleri

Script error line 2053 the specified module could not be found URL res://ieframe.dll/preview.js

Script error line 2053 the specified module could not be found URL res://ieframe.dll/preview.js

The issue is caused when Windows creates the printer profile in the control panel that it doesn't correctly create it with the drivers.
We're not going to completely uninstall all the HP software, instead we're going to remove the corrupt Windows printer profile and reinstall it. Total time for this on an average computer is about 5-10 minutes to completely repair (including reboot).
1) Navigate to Start Menu > Devices and Printers or Start Menu > Control Panel > Printers
2) Select each printer profile for the printer with an issue, then select remove device/printer.
3) Reboot
4) Navigate to Start Menu > All Programs > HP > insert model # here > Add Printer (or Setup Wizard)
5) Follow the setup prompts to reinstall the printer profile and it recreates the Windows printer.
6) Run the HP Update Tool from Start Menu > All Programs > HP if your printer installs it, rebooting afterwards if necessary.
7) Test by printing google.com (uses very little ink when the test page comes out).
Let me know if you have any questions or issues.
Thanks,
Dan
I work for an internation tech company and personally perform thousands of computer repairs a year. I'm based out of the US working for a US company, and have been working on computers for over 13 years.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Error ::OraOLEDBpus10.dll: The specified module could not be found.

hello all,
i have Oracle 9i installed in my system;
Without deinstalling Oracle 9i , i have installed Orale 10 G ...
while opening my application(it is in vC++), i got the following error:
OraOLEDBpus10.dll: The specified module could not be found.
pls advise...

thanks for your prompt response...
i haven't restarted my machine...
whether it is mandate to restart....
anyway... in the path variable...Oracle 10 G installation path preceeds the Oracle 9i... i believe it is sufficient to make the system to look into Oracle 10 G location...
Am i right???

Why i receive errors: "The procedure entry point longjmp could not be found in the dynamic link lib. orauts.dll" and "Error ORA-12560"

Hello,
"C:\app\xps\product\11.2.0\dbhome_1" where is my installation of database oracle enterprise 11g; I use Windows 7 Pro.
I have in System PATH : C:\app\xps\product\11.2.0\dbhome_1\bin
I have in HKEY_LOCAL_MACHINE > SOFTWARE > ORACLE > SYSMAN > OracleDBConsoleorcl : "ORACLE_HOME" value "C:\app\xps\product\11.2.0\dbhome_1"
When i execute "sqlplus / as sysdba" command, i receive error: "The procedure entry point longjmp could not be found in the dynamic link lib. orauts.dll" and "Error ORA-12560"
If i execute
set ORACLE_HOME=C:\app\xps\product\11.2.0\dbhome_1
C:\>set PATH=%ORACLE_HOME%\bin;%PATH%
sqlplus "/ as sysdba"
I don't receive Error.
Why?

You don't mention which specific version of the operating system that you are using - Windows XP, Vista, or 7 and whether you're using a 32-bit or 64-bit version.
FWIW, kernell32.dll is a Windows system-level module, so it's possible that you have some corruption in your Windows installation which is preventing FM from launching.
Also, 2Gb of RAM is a bit lean for FM.

Why am I getting "Error: Access of undefined property TextInputSkin." and "Error: Definition spark.skins.mobile:TextInputSkin could not be found." errors?

I'm using amxmlc to build a SWF from an MXML source code file. I'm passing -swf-version=13 to amxmlc.
In the MXML source, I have the following line:
<s:TextArea id="inputTextArea" width="100%" height="100" fontSize="28" borderColor="#000000" skinClass="spark.skins.mobile.TextInputSkin" />
I get these errors when running the amxmlc command:
...App.mxml(428): Error: Access of undefined property TextInputSkin.
<s:TextArea id="inputTextArea" width="100%" height="100" fontSize="28" borderColor="#000000" skinClass="spark.skins.mobile.TextInputSkin" />
...App.mxml(428): Error: Definition spark.skins.mobile:TextInputSkin could not be found.
<s:TextArea id="inputTextArea" width="100%" height="100" fontSize="28" borderColor="#000000" skinClass="spark.skins.mobile.TextInputSkin" />
Why am I getting these errors? I need to be able to use the spark.skins.mobile.TextInputSkin in order to have use of the soft keyboard on iOS devices.

you need the classes mentioned after 'Definition" in the lines below and they should be place in de/alex_uhlmann/animationpackage subdirectory of your default directory.
Symbol 'nms_new_all.flv', Layer 'Layer 6', Frame 1, Line 2, Column 50
1172: Definition de.alex_uhlmann.animationpackage.animation could not be found.
Symbol 'nms_new_all.flv', Layer 'Layer 6', Frame 1, Line 3, Column 48
1172: Definition de.alex_uhlmann.animationpackage.drawing could not be found.
Symbol 'nms_new_all.flv', Layer 'Layer 6', Frame 1, Line 4, Column 48
1172: Definition de.alex_uhlmann.animationpackage.utility could not be found.
you also need penner's easing class in com/robertpanner

Getting error message "Word(XP or onwards) could not be found on the machine"

I am suddenly unable to drag or open Word documents in Designer ES4. I get the error message 'Word(XP or onwards) could not be found on the machine'. Sounds like some obscure setting is denying access to word to me but I can't seem to locate it. Any suggestions?

Posted an answer here that may help:
http://www.adobeforums.com/webx/.3c05bb1e/0
Good luck.

Error Deploying Business Rules (connection information could not be found)

Similar Messages

Maybe you are looking for