Error in FILE 2 Proxy Scenario

Hi All,
I am doing File to Proxy Scenario i am getting following error
Could any one provide the solution for this.
*<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
*- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">INTERFACE_REGISTRATION_ERROR</SAP:Code>
<SAP:P1>ifmmessif</SAP:P1>
<SAP:P2>MI_Emp_Sender</SAP:P2>
<SAP:P3>Namespace</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No implementing class registered for the interface (ABAP interface, request message MI_Emp_Sender, request message, namespace )</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Thanks in Advance
Mahesh
</SAP:Error>
Edited by: Mahesh Reddy on Jul 10, 2008 12:47 PM

Hi Mahesh,
1) Use SPROXY transaction.
Menu-> Proxy -> Activate All.
2) check in the interface determination if u are using correct
inbound interface.
3) If this if fine....try deleting all proxy objects of the interface
and create new.
Regards,
Praveen K

Similar Messages

ATTRIBUTE_IDOC_RUNTIME error in File-IDOC Scenario

Hi,
I got this error in FIle-IDOC scenario.
ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
<SAP:P1>Transaction IDX1: Port SAPMMX, client , RFC destination contain errors
There are many threads on same issue. Almost in all threads, the suggestion given was, we need to check the Channel Definition(Port should be SAP<SYSID> and not SAP<SYSID>_<CLIENT>)
I have given the proper values for RFC desitnation and port. Even then, I m getting this error.
Is there any other suggestions?

Hi aarthi,
I suggest u chk all d settings dat u hav done..
Steps for ALE settings:-
Steps for XI
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the R3 system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto IDX1.
     Create a new port.
     Give the port name.
     Give the client number for the R3 system.
     Select the created Rfc Destination.
Step 3)
     Goto IDX2
     Create a new Meta data.
     Give the Idoc type.
     Select the created port.
Steps for R3.
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the XI system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto WE21.
     Create a port under transactional RFC.(R3->XI)
     Designate the RFC destination created in prev step.
Step 3)
     Goto SALE.
     Basic settings->Logical Systems->Define logical system.
     Create two logical systems(one for XI and the other for R3)
     Basic settings->Logical Systems->Assign logical system.
     Assign the R3 logical system to respective client.
Step 4)
     Goto WE20.
     Partner type LS.
     Create two partner profile(one for XI the other for R3).
     Give the outbound or inbound message type based on the direction.
Step 5)
     Not mandatory.
     Goto BD64.
     Click on Create model view.
     Add message type.
Step 6)
     Goto WE19
     Give the basic type and execute.
     fill in the required fields.
     Goto IDOC->edit control records.
     Give the following values.(Receiver port,partner no.,part type and sender Partner no. and type)
     Click outbound processing.
Step 7)
     Go to SM58
     if there are any messages then there is some error in execution.
     Goto WE02.
     Check the status of the IDOC.
     Goto WE47.
     TO decode the status code.
BD87 to check the status of IDOC.
In case if not authorized then go to the target system and check in SU53, see for the missing object
and assign it to the user.
SAP r3
sm59(status check)(no message)
WE02(status check)
WE05(status check)
BD87(status check)
Xi
IDx5(Idoc check)
SU53(authorization check)
reward points if helpful...
MenoN

Doubt with File- Proxy scenario, email to be sent in case of error in Proxy

Hi,
We have a scenario File->PI->Proxy.
There is a requirement to send notification through email to sender if any error occurs in Proxy side.
I had gone through few links in sdn and found options like usage of Fault message,BPM
If PI is receiving a fault message from ECC in the Inbound/Sync Proxy interface, how should we proceed further in PI to send email?
Can anyone suggest the better way to handle this?
Regards,
Zameer

Hi,
You may want to use Alert functionaliry.
Option1:
If any error occured in Proxy then in error code raise a alert by calling function module 'SALRT_CREATE_API' in the proxy code itself. So alert will automatically send email
http://help.sap.com/saphelp_nw04/helpdata/en/d0/5e073c8e56f658e10000000a114084/content.htm
Option 2:
Create fault message
refer this
/people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1

Error in File-JDBC Scenario

Dear All,
I am working on FILE to JDBC scenario in which I am facing with the following error:
- 2007-12-14 18:18:51 GMT+05:30: Error: TransformException error in xml processor class: Error processing request in sax parser: Error when executing statement for table/stored proc. 'TBL_SAP_PRODUCTS' (structure 'STATEMENTNAME1'): java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
the payload at the JDBC adapter is :
- <ns0:MT_JDBC_MARA xmlns:ns0="urn:abc:mm">
- <STATEMENTNAME1>
- <DbTablename action="INSERT">
<TABLE>TBL_SAP_PRODUCTS</TABLE>
- <access>
<MATERIAL_CODE>000000000001002021</MATERIAL_CODE>
<DESCRIPTION>BASICS 7 FTBL.</DESCRIPTION>
<PRODUCT_HIERARCHY_CODE>00</PRODUCT_HIERARCHY_CODE>
<MATERIAL_GROUP_CODE>R1500</MATERIAL_GROUP_CODE>
<MATERIAL_GROUP_DESC>Basics-FG</MATERIAL_GROUP_DESC>
<BASE_UNIT>S07</BASE_UNIT>
<SAP_ADD_DATE>20051219</SAP_ADD_DATE>
<SAP_MODIFY_DATE>20051219</SAP_MODIFY_DATE>
<EXTRACT_DATE>20071214</EXTRACT_DATE>
</access>
Please guide me what is the error.
Warm Regards,
N.Jain

Hi nishu,
Go into the Repository (IR) and check the conditions mentioned for the field <STATEMENTNAME1>/TBL_SAP_PRODUCTS in the datatype, searching it by the respective namespace and check if the given input has the expected data type.
Change your payload date format according to the timestamp specified in the condition .
Regards,
Shibani
*reward with points if helpful*

Inbound Proxy Error - JDBC to PROXY Scenario

Hi experts,
I am getting the following error while activating Inbound Proxy.
Error when creating service node. [unknown]You are not authorized to use function Netzwerkadministration
Exception of class CX_SRT_WSP_ICF
Regards,
Sudheer

Hi Experts,
Thank you for your replys.....Problem got solved......:)
Some authorisation was missing...Now it was fine and I can activate Inbound proxy......:)
Once again Thank you for your replys.....:)
Regards,
Sudheer

Receiver communication chanel error in File conversion scenario

Hi ,
I am trying to implement a file-xi-file scenarion in which the input is a tab delimited file...The Sender channel works fine.
The problem i am facing now is that the receiver commmunication channel throws an error in adapter monitoring..the error says ...
"Receiver Adapter v2123 for Party '', Service 'FILE_TRANSFER2_SD':
Configured at 2006-05-18 14:26:02 GMT+05:30
History:
- 2006-05-18 14:26:02 GMT+05:30: Error: Conversion initialization failed: Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
Parameter '.fieldFixedLengths' or '.fieldSeparator' is missing "
If i remove the receiver content conversion then the channel works fine and gives me the output as one single string of charaters widout any formatting....
I have added both the fields in the content conversion of the receiver channel...
Plz help...
Thanx ,
Srestha

Hi,
You have to give in you field content conversion either the paramter 'field seperator' or 'fieldFixedLengths'
<i>'If you make a specification here, the system expects that the structure contains the specified character string (one or more characters) as a separator between the individual columns.
If you have not made an entry for fieldFixedLengths, this is the only specification to identify the individual columns in a row.
If you made a specification for fieldFixedLengths, the extra length of the separator is taken into account, but no further consistency checks are performed.</i>
Regards
Vijaya
Message was edited by: vijaya kumari

Error in File 2File scenario

Hello Friends,
when i am doing file 2 file scenario . my input file was picked but i was unable to show in reciever side . but in message moni it is showing black flag .. i am send ing the same file to database also in mesg moni it is showing 3 flags of it one showing message branched and the remaining interfaces it is showing black flag.\please solve my problem .

Did you checked the detailed logs under 'versions' of the message in 'Message monitoring'?
Go to Run time workbench.
Select Message Monitoring
Select your message and click on Versions.
Select the Adaptor Engine(receiver) and click on 'Details' button to view the detialed logs.
I'm sure you will see something that stopping the message to go to receiver.
Thanks,
DV:)

File to Proxy Scenario : Error in communication channel monitoring

Hi,
I have developed File to Proxy Scenario on PI 7.1 system and it is not working. I see the below error in communication channel monitoring.
u201CError: com.sap.engine.interfaces.messaging.api.exception.ConfigException: Some of the IS access information is not available. SLDAccess property may be set to true, but SLD is not available.u201D
File will be picked from the FTP server.
I have created File system in SLD of type "Third Party", Can this be the issue?
Please guide me on this.
Thanks,
Chandravadan

Hi!
Check if the tcode SLDCHECK is ok!
Check note #764176.
Also, refer to link below and execute each steps from the links there MANUALLY.
Wizard-Based Configuration:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/45/2e4c1b16bb4aa8e10000000a11466f/frameset.htm
Regards,
Caio Cagnani

File to Proxy Scenario Error

Hi Experts,
I am working on File To Proxy Scenario. I am getting the below Error: The Messages in SXMB_MONI are going to AUtomatically Restart Status. I see some Queues with RETRY Status in SMQ2. When i am testing from SPROXY, the Table is Updated with the Corresponding Values. But when i place the file in the ftp folder then i am getting this error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_SEND_FAILED</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>(See attachment HTMLError for details)</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error while sending by HTTP (error code: 500, error text: Internal Server Error) (See attachment HTMLError for details)</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Please check and do the needful .
Regards,
GIRIDHAR

Hi Giridhar,
The problem is with connection. Please check the below discussion
HTTP returns status is 500(Internal Server Error)
Problem in ABAP proxy........ | SCN
regards,
Harish

FTP to ABAP Proxy Scenario - getting error CO_TXT_CHANNEL_PASSWORD_ERROR

We have transported PI and EP data from development server to respective production, every thing is running fine except the abap proxy scenarios i.e. PI reads file from ftp location and calls the abap proxy but we are getting following errors:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_CHANNEL_PASSWORD_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to read user password from communication channel of type Error when accessing the secure store (access ID = FD768D4A8772DB50E1000000AC10041E) Error while reading from the secure store: ERROR_UNKNOWN: Cannot find entry in secure store (SECSTORE,023)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any solution?
Please note that I have searched and applied solutions given on SDN forums but didn't get any success. So I am looking for new suggestions.
Regards,
Jawed Ali

Jawed ,
Please test the HTTP destination of your receiver comm channel.
Which is the RFC connection to your R3 system.
Transaction SM59 and check the logon parameter for the connection you are using.
Regards,

File to ABAP Proxy Scenario

Hi All,
I am doing File-to-ABAP Proxy Scenario, in the sender side side it is picking the file, but in sxmb_moni it is giving the error:
*<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
*- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">DUPLICATE_DETECTED</SAP:Code>
<SAP:P1>4CFF4691EEE211DC85E30019D1522982</SAP:P1>
<SAP:P2>CENTRAL</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message ID 4CFF4691EEE211DC85E30019D1522982 already exists in called system (pipeline CENTRAL)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Can u plz tell me why this error is occurring and how we can resolve this error.
Thanks & Regards,
Vikas

Hi Vikas
make a dummy change and activate your object then make a full refresh
you can make it through in 3 ways
1) tcode SXI_CACHE
2) go to ID -> environment and make a full cache refresh
3) http://<host>:5<sys#>00/CPACache/refresh?mode=full Full CPA cache refresh
when you do the developement then these are stored in ABAP data dictionary table which can be refreshed by delta cache
while full cache will delete this temporary object and make this cahe into runtime
hope this will help you
thanks
sandeep
if helpful reward points

SOAP to Proxy scenario communication error

Hi Friends,
     Now i am developing SOAP to Proxy scenario, i am testing WSDL file using SOAP UI software and i am getting an error in SOAP UI tool.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<title>Error Report</title>
<style>
td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;}
A:link {color : #0059AA;}
A:visited {color : #999999;}
A:active {color : #999999;}
</style>
</head>
<body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0">
<table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75">
<tr bgcolor="#FFFFFF">
<td align="left" colspan="2" height="48"><font face="Arial, Verdana, Helvetica" size="4" color="#666666"><b>  403 Forbidden</b></font></td>
</tr>
<tr bgcolor="#3F73A3">
<td height="23" width="84"><img width=1 height=1 border=0 alt=""></td>
<td height="23"><img width=1 height=1 border=0 alt=""></td>
<td align="right" height="23"><font face="Arial, Verdana, Helvetica" size="2" color="#FFFFFF"><b>SAP NetWeaver Application Server </b></font></td>
</tr>
<tr bgcolor="#9DCDFD">
<td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td>
</tr>
</table>
<br><br><br><br><br><br>
<p><font face="Arial, Verdana, Helvetica" size="3" color="#000000"><b>  Error: You are not authorized to view the requested resource.</b></font></p>
<p><font face="Arial, Verdana, Helvetica" size="2" color="#000000"><b>  <a href="https://wiki.sdn.sap.com/wiki/x/wIN3Cw">SAP Technology Troubleshooting Guide</a></b></font></p>
<p><font face="Arial, Verdana, Helvetica" size="2" color="#000000"><table>
<tr>
<td valign="top"><b> Details:</b></td>
<td valign="top"><PRE>No details available.</PRE></td>
</tr>
</table></font></p>
</body>
</html>
I have tried with the same WSDL earlier it was working fine, now its not working and throwing the above error.
Kindly suggest me to overcome from this issue.
Regards,
Senthil.

Hi Senthil,
Try with the authentication preemtive. Also, check your URL because that error seems that you are accessing to wrong PI section or your user has not the enough credentials, try with PIAPPLUSER or with the same roles that this user.
Regards.

Mail to Proxy scenario with attachment. AF channel error.

Hi,
We are running SAP PI 7.1. I am experiencing the following problem in a Sender Mail adapter.(POP3).Mail to Proxy Scenario.
I have configured a sender mail adapter channel as POP3. This channel is configured to use the Mail Package and to Keep attachments. When I send a mail with an attachment to the mailbox that is being monitored by this channel, then the channel collects it from the mailbox.
In channel monitoring it indicates that the message was successfully delivered. However when I click on the message ID the view the audit Log it gives an error: u201CTransmitting the message to endpoint http://HOSTNAME:8101/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message over HTTP. Reason: java.io.IOException: Error writing to server.u201D The message never arrives at the integration sever to be view in sxmb_moni.
Also when I sent a message without an attachment the message does go through. Or if I send a message with a text attachment the the message goes through, but not the attachment.
Any help would be most welcome.
Regards
Willie Hugo

Hi Willem,
I'm coming back to your original problem: "com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message over HTTP. Reason: java.io.IOException: Error writing to server.u201D
Actually I had the same problem here and found a solution for it. In this case it was a file to Proxy scenario. The file send was large. After structure conversion the file size was more then 100 MB as indicated in the Audit Log of the message "2009-03-02 09:27:06 Information Send binary file "<File_Name>" from ftp server "<ftpuser>", size 106706248 bytes with QoS EO.
The ICM restricts all HTTP requests larger then 102 MB via the parameter icm/HTTP/max_request_size_KB which has a default value of 102400 (100 MB). Therefore it rejects the requests and your error is thrown.
There are two ways of avoiding this:
1) Increase the parameter:
Increasing the parameter implies a risk since large messages can overload the system (e.g. during the mapping). Therefore it is good to have these safety measurement in place.
2) Split the request:
Depending on the scenario it might be possible to split the request to restrict the max. number of records for a given file. This is the prefered option because it ensures better stability of the system and also better performance.
I think this situation applies to you as well - but I'm not sure since you did not specify the request size and the size of the attachement.
Best regards,
Mike

File to Proxy scenario message failed in ECC with staus SYSFAIL

Hi All,
We are working on File to proxy scenario, PI able to send message successfully to ECC, but In ECC , message got stuck in queues with the status 'SYSFAIL',
when I read the error message it is showing Address Invalid.
when I run the LUW, it is giving 'Function module does not exist or EXCEPTION 'raised message.
I'm using PI 7.1 EHP1 , ECC 6.0, can anyone suggest the trouble shooting guidelines for this issue?
Thanks,
Venu.

when I run the LUW, it is giving 'Function module does not exist or EXCEPTION 'raised message.
in your code, there seems to be an invalid statement.
check the proxy code.

ABAP proxy scenario file - PI7.1- ECC NO_MAPPINGPROGRAM_FOUND

Hello Experts,
I have ABAP proxy scenario file -> PI7.1->ECC . I am getting an error for communication between PI and ECC system. the error is NO_MAPPINGPROGRAM_FOUND and pointing to operation mapping in the software component.
What i found in TCODE SXMB_MONI is 2 adaptor call one from one below the other out of which one is in error.
Also when a file is passed from the file server to the SAP PI I see 2 entries in SXMB_MONI for the same Payload one from source system to target system and one from target system to source system ( ie. from business component as sender and ECC as receiver system and one entry for ECC system as receiver and business system for file as receiver ) is this how it should be
one more thing i would like to specify is that my service interface is Point to point enabled . Is it happening because of that
Request you help on urgent basics
BR Heth

Hi,
1. in PI, by hazard, your Service Interface (SI) does not the mode "synchronous"?
2. or does this SI was declared firstly with "synchronous" mode and the proxy generated with this mode, and then you decided to put "Asynchronous"... without to regenerate the proxy in ECC?
If it's the case, in ECC, select your SI, do a right-click and regenarete the proxy.
3. for the 2nd message (returned by ECC to PI), have you seen the Payload content and SOAP Header?
Could you please also check the Pipeline (e.g CENTRAL, CENTRAL_BACK) ?
4. In SXMB_MONI of ECC, how many messages have you: one ? or two ?
Regards
Mickael

Error in FILE 2 Proxy Scenario

Similar Messages

Maybe you are looking for