File to Proxy Scenario : Error in communication channel monitoring

Hi,
I have developed File to Proxy Scenario on PI 7.1 system and it is not working. I see the below error in communication channel monitoring.
u201CError: com.sap.engine.interfaces.messaging.api.exception.ConfigException: Some of the IS access information is not available. SLDAccess property may be set to true, but SLD is not available.u201D
File will be picked from the FTP server.
I have created File system in SLD of type "Third Party", Can this be the issue?
Please guide me on this.
Thanks,
Chandravadan

Hi!
Check if the tcode SLDCHECK is ok!
Check note #764176.
Also, refer to link below and execute each steps from the links there MANUALLY.
Wizard-Based Configuration:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/45/2e4c1b16bb4aa8e10000000a11466f/frameset.htm
Regards,
Caio Cagnani

Similar Messages

Advance selection for source file-Error in communication channel monitoring

Hi all,
Referring to the link below:
/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
I have developed my scenario in the same way.But due to the values <NOTHING>
in Mandatory fields Source Directory and Filename,i am facing problem in Communication Channel Monitoring as it shows an error;even though the end-to-end scenario works successfully.
Plase note that our scenario is not to exclude the particular file but to pick the files serially after a certain delay.
Kindly provide some idea about how can we remove the error from Communication Channel Monitoring.
Thanks & Regards,
Sudhir Tiwari

Sudhir,
In the sender file adapter, you have an option called "Processing Sequence".
By selecting ByName or ByDate you can make files get selected sequentially either ByName ( alphabetically ) or by the creation time stamp of the file.
In the sender file adapter also make the QOS as EOIO and give the QueueName as any value and the files will be processed sequentially.
Regards
Bhavesh

File to Proxy Scenario Error

Hi Experts,
I am working on File To Proxy Scenario. I am getting the below Error: The Messages in SXMB_MONI are going to AUtomatically Restart Status. I see some Queues with RETRY Status in SMQ2. When i am testing from SPROXY, the Table is Updated with the Corresponding Values. But when i place the file in the ftp folder then i am getting this error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_SEND_FAILED</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>(See attachment HTMLError for details)</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error while sending by HTTP (error code: 500, error text: Internal Server Error) (See attachment HTMLError for details)</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Please check and do the needful .
Regards,
GIRIDHAR

Hi Giridhar,
The problem is with connection. Please check the below discussion
HTTP returns status is 500(Internal Server Error)
Problem in ABAP proxy........ | SCN
regards,
Harish

Page cannot be displayed error in Communication channel monitoring

Hi,
when i am trying to click on Communication channel monitoring from RWB it shows me the error " Page cannot be displayed".
I am testing this for the for the first time in QA environment.
But in development , CC monitoring works fine in the same Laptop.
I have checked the hosts file and it has the IP address and system name present in it.
i have checked in my collegues laptop and it opens there, but it doesn't open in my laptop.
we are using PI 7.0, windows XP and IE 7.0.
Could anyone help to solve this problem?
Thanks
JJ

I am able to open the communciation channel if i am using the path http://<full qualified host>:<http port>/mdt/channelmonitorservlet
This means that there is a problem in the host file....the changes are not getting reflected.....did you log-ff and then again login?
instead of the FQDN you can also open the page using the IP address of the server.
I am really sorry I am unable to give you points, since the Star icon is not displaying in the browser to award points
This may be because you did not mark the thread as a question
Regards,
Abhishek.

Error in Communication Channel Monitoring

Dear All Experts ,
we are getting the below error message while posting the transaction in the communication channel monitoring. Pls advise to resolve the same.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIServer/UNKNOWN/ADAPTER.JAVA_EXCEPTION - com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve binding for the given channelId: Binding:CID=ae1e4075a0063170895328ec6f70c70d; at com.sap.aii.af.service.cpa.impl.lookup.AbstractLookupManager.getBindingByChannelId(AbstractLookupManager.java:173) at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:431) at javax.servlet.http.HttpServlet.service(HttpServlet.java:727) at javax.servlet.http.HttpServlet.service(HttpServlet.java:820) at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:162) at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:81) at com.sap.engine.services.servlets_jsp.server.servlet.AuthenticationFilter.doFilter(AuthenticationFilter.java:124) at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:73) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:461) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:298) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:396) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:385) at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:76) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:243) at com.sap.e
Regards
Machindra Patde

Hi Machindra,
Check if the channel name specified in sender/receive agreement is correct.
If yes then delete the particular channel and create new one and specify that one in the agreement.

FlatFile 2 IDOC: Error in Communication Channel Monitoring

The given below is the Audit Log:
===========================
Error convert()
Error: convertCalledFromModule()
Error: process()
Error process()
Error MP: Exception caught with cause javax.resource.ResourceException: --- Conversion of synchronous request from module chain ended with errors ---[Error:ID=3069;LEVEL=3] SegmentDescription: checkAndResetChildrenCounter() not enough repetitions of the segment S_BGM found: 0 instead of 1 offset :2588 DESCRIPTION: SegmentDescription Warning: Not enough repetitions of the segment S_BGM ([not specified]/[not specified]).
Note:
My IDOC has S_BGM with 1..1 occurance.
S_BGM is created at the target.
But still, the above excception.
Can any one provide the solution?

Hi,
The test is successfull in the IR.
Error shown in communication channel moni.
I hope, mapping a constant is not required here as S_BGM is a 1..1 (occurance)
Edited by: santosh kumar on Dec 19, 2007 12:53 PM

Error for Communication Channel Monitoring

Hi
Getting the following error when trying to read the file using Content Conversion.
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 2 according to structure 'Tivoli_Row':java.lang.Exception: ERROR in configuration / structure 'Tivoli_Row.': More elements in file csv structure than field names specified!
Pls. suggest me where it's gone struck.
Regards,
Yeswanth.

Hi Gabriel,
I has given in sender comm channel
=>set processing mode : test
and in Receiver comm channel. am using FTP login
so, here i just read this file and then placed using FTP in R/3 system.
Now, am getting the following error.
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 1 according to structure 'Tivoli_Row':java.lang.Exception: ERROR in configuration / structure 'Tivoli_Row.': More elements in file csv structure than field names specified.
even i checked my input data also...it's every thing fine.
File content : 32 fields
input data i has given : 32 fields showing correctly
Pls .give me the solution ASAP.
Regards,
Yeswanth.

File RFC sync scenario error: MsgId alredy exists in the system

Hi,
I am working on File RFC sysnc scenario.
The first message that I tried to processed gave a error
com.sap.aii.af.ra.ms.api.DeliveryException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not convert request from XML to RFC:com.sap.mw.jco.JCO$ConversionException: (122) JCO_ERROR_CONVERSION: Date ' ' has a wrong format at field REQ_DATE_H: Unparseable date: " "
When I retried correcting the data, it started giving strange error
Message ID 62D07CA0D3EE11DCCD36DA01C52F0606 for pipeline CENTRAL, version already exists in system.
How to rectify this?
XI version is PI 7.0 SP10

Nisar,
Which program to re-run? Are you talking about activating the channel again? If so, then I have done it many times changing the file name.
I got below error in Communication Channel Monitoring:
2008-02-06 02:27:39 Error Received XI System Error. ErrorCode: MSGGUID_EXISTING ErrorText: ErrorStack: Message ID 83F8B0B0D48311DCA544DA01C52F0606 for pipeline CENTRAL, version already exists in system
2008-02-06 02:27:39 Error Returning synchronous error notification to calling application: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MSGGUID_EXISTING:.
2008-02-06 02:27:39 Error Transmitting the message using connection http://xibox:8000/sap/xi/engine?type=entry failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MSGGUID_EXISTING:.
2008-02-06 02:27:39 Error The message status set to FAIL.
2008-02-06 02:27:39 Error Returning to application. Exception: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MSGGUID_EXISTING:
2008-02-06 02:27:39 Error Attempt to process file failed with com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MSGGUID_EXISTING:
2008-02-06 02:27:39 Error Attempt to process file failed with com.sap.aii.af.service.util.transaction.api.TxManagerException: Unable to roll back transaction: com.sap.engine.services.ts.exceptions.BaseIllegalStateException

Error in communication channel FIle to SFTP

Hi All,
My scenario is File to file. Sender is File and receiver SFTP.
I am getting below error in RWB communication channel monitoring
Could not process due to error: java.lang.NullPointerException: while trying to get the length of an array loaded from local
variable 'dirList'
Please provide you suggestions on this. Why does this error occurs. Earlier it works fine. Today only I am getting this error.
Regards,
Saravanan

Hi
Can you please check access right of SFTP folder please also check notes 1673907 - ERROR:while
Regards,
Amit

Error in FILE 2 Proxy Scenario

Hi All,
I am doing File to Proxy Scenario i am getting following error
Could any one provide the solution for this.
*<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
*- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">INTERFACE_REGISTRATION_ERROR</SAP:Code>
<SAP:P1>ifmmessif</SAP:P1>
<SAP:P2>MI_Emp_Sender</SAP:P2>
<SAP:P3>Namespace</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No implementing class registered for the interface (ABAP interface, request message MI_Emp_Sender, request message, namespace )</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Thanks in Advance
Mahesh
</SAP:Error>
Edited by: Mahesh Reddy on Jul 10, 2008 12:47 PM

Hi Mahesh,
1) Use SPROXY transaction.
Menu-> Proxy -> Activate All.
2) check in the interface determination if u are using correct
inbound interface.
3) If this if fine....try deleting all proxy objects of the interface
and create new.
Regards,
Praveen K

Communication Channel Monitoring Error

Hi...Experts,
we r doing RFC-SOAP scenario with out using WSDL file,
sender Communication Channel Monitoring getting error like this
Error in processing caused by: com.sap.aii.af.mp.module.ModuleException: call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML; HTTP 403 Forbidden caused by: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML; HTTP 403 Forbidden
In the Receiver Communication Channel Monitoring, getting error like this.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: invalid content type for SOAP: TEXT/HTML; HTTP 403 Forbidden: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 403 Forbidden.
how can i rectify these errors, pls suggest me..
regards,
Pasi.

Hello Pasi,
Error: HTTP 403 Forbidden
Description: The server understood the request, but is refusing to fulfill it
Possible Tips:
Path sap/xi/engine not active
HTTP 403 during cache refresh of the adapter framework - Refer SAP Note -751856
Because of Inactive Services in ICF Go to SICF transaction and activate the services. Refer SAP Note -517484
Error in RWB/Message Monitoring- because of J2EE roles Refer SAP Note -796726
Error in SOAP Adapter - "403 Forbidden" from the adapter's servlet. Because of the URL is incorrect or the adapter is not correctly deployed.
Go through Micheal's Blog..
XI: Timeouts
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
Thanks,
Satya Kumar

File to Proxy Scenari0, Error in ECC server Messages stucked in Queue

Hi All
we have created a file to proxy scenario in PI & when we are sending the data to Proxy, proxy is not getting executed in SAP ECC & we are getting the following error in out production ECC server & all the messages are getting s
No load could be found for transformation /1SAI/TXSA9475ABE3925030F71D9
could any one of you please help me in resolving this issue.
Thanks
Rinku Gangwani

Hi,
Are you activate the ICF services in ERP system? This issue must be done for the correct execution of proxy channel.
What type of program mapping are you using for the content transformation?
If you use a ABAP mapping program make sure to activate the program correctly.
Best regards
Ivá

XML file to Proxy Scenario with BPM - ID Steps

Hi Guys,
Any one can help me to find about the scenario XML file to ABAP Proxy with BPM, ID steps please. Any link or logical routing, receiver determination and interface determination idea. Please correct me,
I have created Business Service as sender to send one xml file to BPM, BPM is sending a message to SNC system. I have created 2 receiver determinations, but I am confusing in interface determination, where to declare OM?
Please can any one respond bit quicker.
Thanks in advance
Regards
San

ES Repository
                     *Service Interfaces*
Create one outbound service interface for XML file.
Create one Inbound synchronous Interface for SNC system.
Create one Abstract Asynchronous interface ,same message type as you used for outbound service interface .This is for Integration process receive step.
Create one Abstract async interface for receiving the response from SNC system in Integration process.
Create one Abstract synchronous interface to be used in the Integration process for Send sync step.
Create on inbound asyn service interface for sending the response from integration process (received from SNC system) to the Receiver System.
              Operation Mapping.
Create an Operation Mapping using Abstract sync interface and inbound syn interfaces.
              Integration Process
start--->receive Step---->send Synchronous step----->send step.
Create two container elements
first with abstrat async interface for the XML request.
second for abstract asyn interface with the XML response structure (asyn receiver system structure)
In the send sync step select your abstract syn interface from the F4 help.and select the corresponding request and response message from the container element you defined earlier.
Integration Directory.
Create one sender File adapter Communication channel for XML file reading.
Create two receiver communication channel for sync system(receiver XI adapte for ABAP PROXY) and other for asyn receiver system .
Create 3 receiver determination
1.from sender to Integration process.
2.from Integration process to SNC system.
3. from Integration process to Asyn Receiver System.
Create 3 Interface determination.
Specify Operation mapping while you are creating interface determination from Integration Process to Syn BS.
Create one sender agreement
Create two Receiver agreement.
Regards
Kubra Fatima.

Capturing the communication channel monitoring error into an alert.

Hi,
The following is my scenario:
File adapter polls using file content conversion,if the source file is not in a proper format the file wont be picked up and communication channel will show error in channel monitoring.
I have to configure an alert for the same.
Can i capture the error message shown in communication channel monitoring and raise alert?
Many Thanks,
Pritish

refer todays thread on the same issue;
FILE ADAPTER ISSUE

LMS 3.2 Internal Error in Communication Channel

Hello,
I am having an issue with the DCR in which I get the error "Internal Error in Communication Channel" after trying to edit the credentials of a device.
It started when I tried to add a device to the DCR, with all credentials, and it wouldn't show up in the DCR. I tried this 3x, but no luck. I was eventually able to do so by using the Bulk Import, and having the single device (with all the credentials) in the .csv file.
Now that the device is in the DCR, I need to edit the User Defined Fields - but when I try to, I get the error mentioned above.
I've seen other threads here that talk about multi-server setups, and FQDNs, but I'm not using any of that. I've also noticed that there is a bug ID for it, CSCtd07131, but it says 'release-pending'.
Am I up the creek until an update comes out? (its not just user defined fields, btw, I'm unable to modify any credentials.)
Thanks

When you restart the ciscoworks processes you should always give a couple of minutes and log on when the cpu starts to come down.
If it continues to error when you add or modify you better open a case with the tac.
The bug you mention is only if you have multiple systems with a master and slave DCR
Cheers,
Michel

File to Proxy Scenario : Error in communication channel monitoring

Similar Messages

Maybe you are looking for