Error in Server0 and disp+work.exe when I start system...
Hi gurus,
I´m facing with a problem when I start the system. In fact is weird because the same system before I stop it´s fine, without any problem in SAPMMC console... So now the server0 is in stopped status with exitcode -11113 and in process list the disp+work.EXE (Dispatcher) is with status message "Running, Message Server connection ok, Dialog Queue time:0.00 sec, J2EE: Some processes running" with yellow semaphore. (both situations are on following image):
--> http://img2.imageshack.us/img2/6307/aioerror.png
--> http://img2.imageshack.us/img2/4706/aioerror1.png
I checked some log files dev_server0 and dev_disp, which are both in next post...
DEV_DISP:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid AIO
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 201
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 748
Thu Sep 10 15:40:04 2009
kernel runs with dp version 242000(ext=110000) (@(#) DPLIB-INT-VERSION-242000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 748) [dpxxdisp.c 1287]
shared lib "dw_xml.dll" version 201 successfully loaded
shared lib "dw_xtc.dll" version 201 successfully loaded
shared lib "dw_stl.dll" version 201 successfully loaded
shared lib "dw_gui.dll" version 201 successfully loaded
shared lib "dw_mdm.dll" version 201 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Thu Sep 10 15:40:09 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5518]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >saperpaio_AIO_00 <
DpShMCreate: sizeof(wp_adm) 22784 (1752)
DpShMCreate: sizeof(tm_adm) 5912704 (29416)
DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F210050, size: 6607136)
DpShMCreate: allocated sys_adm at 000000000F210050
DpShMCreate: allocated wp_adm at 000000000F212270
DpShMCreate: allocated tm_adm_list at 000000000F217B70
DpShMCreate: allocated tm_adm at 000000000F217BD0
DpShMCreate: allocated wp_ca_adm at 000000000F7BB450
DpShMCreate: allocated appc_ca_adm at 000000000F7C1250
DpShMCreate: allocated comm_adm at 000000000F7C3190
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F849E20
DpShMCreate: allocated gw_adm at 000000000F849EA0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F849ED0
DpShMCreate: allocated wall_adm at 000000000F849EE0
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
J2EE server info
start = TRUE
state = STARTED
pid = 1784
argv[0] = D:\usr\sap\AIO\DVEBMGS00\exe\jcontrol.EXE
argv[1] = D:\usr\sap\AIO\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\AIO\SYS\profile\AIO_DVEBMGS00_saperpaio
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=AIO
argv[7] = -DSAPMYNAME=saperpaio_AIO_00
argv[8] = -DSAPPROFILE=D:\usr\sap\AIO\SYS\profile\AIO_DVEBMGS00_saperpaio
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1694]
***LOG Q0K=> DpMsAttach, mscon ( saperpaio) [dpxxdisp.c 12527]
DpStartStopMsg: send start message (myname is >saperpaio_AIO_00 <)
Thu Sep 10 15:40:10 2009
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 201
Release check o.K.
Thu Sep 10 15:40:12 2009
DpJ2eeLogin: j2ee state = CONNECTED
Thu Sep 10 15:40:34 2009
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Thu Sep 10 15:40:50 2009
my types changed after wp death/restart 0xbf --> 0x9f
Thu Sep 10 15:41:10 2009
ERROR => DpWPCheck: W0 (pid 1600) died (severity=0, status=0) [dpxxdisp.c 15663]
ERROR => DpWPCheck: W8 (pid 596) died (severity=0, status=0) [dpxxdisp.c 15663]
ERROR => DpWPCheck: W10 (pid 2916) died (severity=0, status=0) [dpxxdisp.c 15663]
ERROR => DpWPCheck: W12 (pid 2828) died (severity=0, status=0) [dpxxdisp.c 15663]
Thu Sep 10 15:41:30 2009
ERROR => DpWPCheck: W0 (pid 1600) died (severity=0, status=0) [dpxxdisp.c 15663]
ERROR => DpWPCheck: W8 (pid 596) died (severity=0, status=0) [dpxxdisp.c 15663]
ERROR => DpWPCheck: W10 (pid 2916) died (severity=0, status=0) [dpxxdisp.c 15663]
ERROR => DpWPCheck: W12 (pid 2828) died (severity=0, status=0) [dpxxdisp.c 15663]
Thu Sep 10 15:41:50 2009
ERROR => DpWPCheck: W0 (pid 1600) died (severity=0, status=0) [dpxxdisp.c 15663]
ERROR => DpWPCheck: W8 (pid 596) died (severity=0, status=0) [dpxxdisp.c 15663]
ERROR => DpWPCheck: W10 (pid 2916) died (severity=0, status=0) [dpxxdisp.c 15663]
ERROR => DpWPCheck: W12 (pid 2828) died (severity=0, status=0) [dpxxdisp.c 15663]
Thu Sep 10 15:45:10 2009
ERROR => DpWPCheck: W0 (pid 1600) died (severity=0, status=0) [dpxxdisp.c 15663]
ERROR => DpWPCheck: W8 (pid 596) died (severity=0, status=0) [dpxxdisp.c 15663]
ERROR => DpWPCheck: W10 (pid 2916) died (severity=0, status=0) [dpxxdisp.c 15663]
ERROR => DpWPCheck: W12 (pid 2828) died (severity=0, status=0) [dpxxdisp.c 15663]
Thu Sep 10 15:45:30 2009
ERROR => DpWPCheck: W0 (pid 1600) died (severity=0, status=0) [dpxxdisp.c 15663]
my types changed after wp death/restart 0x9f --> 0xbf
ERROR => DpWPCheck: W8 (pid 596) died (severity=0, status=0) [dpxxdisp.c 15663]
ERROR => DpWPCheck: W10 (pid 2916) died (severity=0, status=0) [dpxxdisp.c 15663]
ERROR => DpWPCheck: W12 (pid 2828) died (severity=0, status=0) [dpxxdisp.c 15663]
Similar Messages
-
ECC 6.0 installation error and disp+work.exe not up
Hi guys,
I posted a message yesterday and reposting today to be readable
I in the middle of installation process. The system I am building Ecc 6.0 on
windows 2003:oracle(Abab+Java).
I am stuck in 90/96 step. this is the error message I am getting
ERROR 2007-09-30 21:32:12
CJS-30146 Error when creating authorization to import exchange profile.
<br> DIAGNOSIS: Check java.log and sapinst_dev.log for details.<br>SOLUTION:
Verify the connection to the J2EE engine.
ERROR 2007-09-30 21:32:12
CJS-30146 Error when creating authorization to import exchange profile.<br> DIAGNOSIS:
Check java.log and sapinst_dev.log for details.<br>SOLUTION: Verify the connection to the J2EE engine.
ERROR 2007-09-30 21:32:12
FCO-00011 The step GrantRights with step key |NW_Onehost|ind|ind|ind|ind|0|0|
SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_PI|ind|ind|ind|ind|1|0|
CreateExchangeProfileRights|ind|ind|ind|ind|3|0|GrantRights was executed with status ERROR .
And also disp+work.exe is not starting up. Are these inter-related problems because
I see j2ee included in disp+work.exe as well. please help me on this issue.
I have posted developer trace log
trc file: "dev_disp", trc level: 1, release: "700"
sysno 53
sid EC3
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 52
intno 20050900
make: multithreaded, Unicode, optimized
pid 1656
Mon Oct 01 17:19:34 2007
kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (53 1656) [dpxxdisp.c 1231]
shared lib "dw_xml.dll" version 52 successfully loaded
shared lib "dw_xtc.dll" version 52 successfully loaded
shared lib "dw_stl.dll" version 52 successfully loaded
shared lib "dw_gui.dll" version 52 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3953
Mon Oct 01 17:19:39 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the
DNS settings [dpxxtool2.c 5233]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >otisap09_EC3_53 <
DpShMCreate: sizeof(wp_adm) 12672 (1408)
DpShMCreate: sizeof(tm_adm) 3954072 (19672)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1452)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06510040, size: 4607512)
DpShMCreate: allocated sys_adm at 06510040
DpShMCreate: allocated wp_adm at 06511E28
DpShMCreate: allocated tm_adm_list at 06514FA8
DpShMCreate: allocated tm_adm at 06514FD8
DpShMCreate: allocated wp_ca_adm at 068DA570
DpShMCreate: allocated appc_ca_adm at 068E0330
DpShMCreate: allocated comm_adm at 068E2270
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06963130
DpShMCreate: allocated gw_adm at 06963170
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 069631A0
DpShMCreate: allocated wall_adm at 069631A8
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
MM diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
Mon Oct 01 17:19:40 2007
J2EE server info
start = TRUE
state = STARTED
pid = 1184
argv[0] = C:\usr\sap\EC3\DVEBMGS53\exe\jcontrol.EXE
argv[1] = C:\usr\sap\EC3\DVEBMGS53\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\EC3\SYS\profile\EC3_DVEBMGS53_otisap09
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2682
argv[5] = -DSAPSYSTEM=53
argv[6] = -DSAPSYSTEMNAME=EC3
argv[7] = -DSAPMYNAME=otisap09_EC3_53
argv[8] = -DSAPPROFILE=C:\usr\sap\EC3\SYS\profile\EC3_DVEBMGS53_otisap09
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1617]
***LOG Q0K=> DpMsAttach, mscon ( otisap09) [dpxxdisp.c 11414]
DpStartStopMsg: send start message (myname is >otisap09_EC3_53 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 52
Release check o.K.
Mon Oct 01 17:19:41 2007
DpJ2eeLogin: j2ee state = CONNECTED
Mon Oct 01 17:19:52 2007
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
ERROR => NiIRead: SiRecv failed for hdl 5 / sock 1476
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2688) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=1184)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Mon Oct 01 17:20:20 2007
ERROR => W0 (pid 1732) died [dpxxdisp.c 14021]
ERROR => W1 (pid 3704) died [dpxxdisp.c 14021]
ERROR => W2 (pid 328) died [dpxxdisp.c 14021]
ERROR => W3 (pid 2056) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W4 (pid 3712) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W5 (pid 2176) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W6 (pid 1588) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W7 (pid 2276) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W8 (pid 180) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***Hi Surya,
Please chech this thread. same error as No Profile used. [Useful Thread|ABAP Trial 7.01 SR3 installation problem in WIN xp sp2;
Check antivirus or firewall running? Try to turn it off and then try again.
Thanks
Arun -
Error CJS-20058 when applying J2EE Engine Patches SP19 and Disp+work.exe
Hello All ,
I am working on SAP XI SP9 (Stand alone J2ee Only). When I am trying to upgrade it SP 19 but it had failed at 17th ( Start J2ee Engine ) step . I am getting following error.
ERROR 2007-04-15 06:52:41
CJS-20058 Java EE Engine DVEBMGS00 of SAP system XI3 did not reach state "Starting Applications" after 1033 seconds: giving up.
and after that Disp+Work process is completely failed to start in SAPMMC.
Operating System :- Windows 2003
Database :- Oracle 9.2.0.4
Please Guide me on this.
Thanks & Regards,
Suresh.KHi Sunil,
im sending following files,
disp+work.exe Developer Traces
trc file: "dev_disp", trc level: 1, release: "640"
Tue Apr 17 08:36:33 2007
kernel runs with dp version 133000(ext=102000) (@(#) DPLIB-INT-VERSION-133000-UC)
length of sys_adm_ext is 524 bytes
sysno 00
sid XI3
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 155
intno 20020600
make: multithreaded, Unicode
pid 3584
***LOG Q00=> DpSapEnvInit, DPStart (00 3584) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 155 successfully loaded
shared lib "dw_xtc.dll" version 155 successfully loaded
shared lib "dw_stl.dll" version 155 successfully loaded
shared lib "dw_gui.dll" version 155 successfully loaded
shared lib "dw_mdm.dll" version 155 successfully loaded
Tue Apr 17 08:36:38 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3896]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >dlwsdb10_XI3_00 <
DpShMCreate: sizeof(wp_adm) 10528 (1316)
DpShMCreate: sizeof(tm_adm) 2969176 (14772)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (424)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 06AA0040, size: 3381680)
DpShMCreate: allocated sys_adm at 06AA0040
DpShMCreate: allocated wp_adm at 06AA1B88
DpShMCreate: allocated tm_adm_list at 06AA44A8
DpShMCreate: allocated tm_adm at 06AA44D0
DpShMCreate: allocated wp_ca_adm at 06D79328
DpShMCreate: allocated appc_ca_adm at 06D7F0E8
DpShMCreate: allocated comm_adm_list at 06D81028
DpShMCreate: allocated comm_adm at 06D81040
DpShMCreate: allocated vmc_adm_list at 06DC7D10
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06DC7D38
DpShMCreate: allocated wall_adm at 06DC7D40
MBUF state OFF
Tue Apr 17 08:36:39 2007
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 2207 blocks reserved for free list.
ES initialized.
Tue Apr 17 08:36:41 2007
J2EE server info
start = TRUE
state = STARTED
pid = 3800
argv[0] = D:\usr\sap\XI3\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[1] = D:\usr\sap\XI3\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[2] = pf=D:\usr\sap\XI3\SYS\profile\XI3_DVEBMGS00_dlwsdb10
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1303
argv[5] = -DLISTEN_PORT=1304
argv[6] = -DSAPSYSTEM=00
argv[7] = -DSAPSYSTEMNAME=XI3
argv[8] = -DSAPMYNAME=dlwsdb10_XI3_00
argv[9] = -DSAPPROFILE=D:\usr\sap\XI3\SYS\profile\XI3_DVEBMGS00_dlwsdb10
argv[10] = -DFRFC_FALLBACK=ON
argv[11] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Tue Apr 17 08:36:42 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
Tue Apr 17 08:36:43 2007
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c 1468]
***LOG Q0K=> DpMsAttach, mscon ( dlwsdb10) [dpxxdisp.c 10036]
DpStartStopMsg: send start message (myname is >dlwsdb10_XI3_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Tue Apr 17 08:36:44 2007
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 155
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Tue Apr 17 08:37:24 2007
ERROR => W0 (pid 2888) died [dpxxdisp.c 12562]
ERROR => W1 (pid 2724) died [dpxxdisp.c 12562]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 2324) died [dpxxdisp.c 12562]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 2796) died [dpxxdisp.c 12562]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 1172) died [dpxxdisp.c 12562]
ERROR => W5 (pid 1272) died [dpxxdisp.c 12562]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 1508) died [dpxxdisp.c 12562]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 1704) died [dpxxdisp.c 12562]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-2888 (SIGUSR2)
ERROR => DpWpKill(2888, SIGUSR2) failed [dpxxtool.c 2507]
killing W1-2724 (SIGUSR2)
ERROR => DpWpKill(2724, SIGUSR2) failed [dpxxtool.c 2507]
killing W2-2324 (SIGUSR2)
ERROR => DpWpKill(2324, SIGUSR2) failed [dpxxtool.c 2507]
killing W3-2796 (SIGUSR2)
ERROR => DpWpKill(2796, SIGUSR2) failed [dpxxtool.c 2507]
killing W4-1172 (SIGUSR2)
ERROR => DpWpKill(1172, SIGUSR2) failed [dpxxtool.c 2507]
killing W5-1272 (SIGUSR2)
ERROR => DpWpKill(1272, SIGUSR2) failed [dpxxtool.c 2507]
killing W6-1508 (SIGUSR2)
ERROR => DpWpKill(1508, SIGUSR2) failed [dpxxtool.c 2507]
killing W7-1704 (SIGUSR2)
ERROR => DpWpKill(1704, SIGUSR2) failed [dpxxtool.c 2507]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Dev_w0
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Tue Apr 17 01:31:26 2007
B create_con (con_name=R/3)
B *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
[dbcon.c 4484]
M sysno 00
M sid XI3
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 155
M intno 20020600
M make: multithreaded, Unicode
M pid 524
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 524) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M
M Tue Apr 17 01:31:27 2007
M DpShMCreate: sizeof(wp_adm) 10528 (1316)
M DpShMCreate: sizeof(tm_adm) 2969176 (14772)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 290000 (580)
M DpShMCreate: sizeof(vmc_adm) 0 (424)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 072A0040, size: 3381680)
M DpShMCreate: allocated sys_adm at 072A0040
M DpShMCreate: allocated wp_adm at 072A1B88
M DpShMCreate: allocated tm_adm_list at 072A44A8
M DpShMCreate: allocated tm_adm at 072A44D0
M DpShMCreate: allocated wp_ca_adm at 07579328
M DpShMCreate: allocated appc_ca_adm at 0757F0E8
M DpShMCreate: allocated comm_adm_list at 07581028
M DpShMCreate: allocated comm_adm at 07581040
M DpShMCreate: allocated vmc_adm_list at 075C7D10
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 075C7D38
M DpShMCreate: allocated wall_adm at 075C7D40
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M calling db_connect ...
B create_con (con_name=R/3)
B *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
[dbcon.c 4484]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1284]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9598]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server dlwsdb10_XI3_00 on host dlwsdb10 (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Tue Apr 17 01:31:27 2007
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9783
M * COUNTER 1
M Tue Apr 17 01:31:28 2007
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 254]
M Entering ThSetStatError
Dev_rd
trc file: "dev_rd", trc level: 1, release: "640"
Tue Apr 17 08:36:40 2007
***LOG S00=> GwInitReader, gateway started ( 384) [gwxxrd.c 1627]
relno 6400
patchlevel 0
patchno 155
intno 20020600
pid 384
unicode active
gateway runs with dp version 133000(ext=102000) (@(#) DPLIB-INT-VERSION-133000-UC)
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Tue Apr 17 08:36:41 2007
Bind service sapgw00 (datagram) to port 3300
Bind service sapgw00 (datagram) to port 3300
Bind service sapgw00 (socket) to port 3300
GwPrintMyHostAddr: my host addresses are :
1 : [10.20.2.157] dlwsdb10 (HOSTNAME)
2 : [127.0.0.1] dlwsdb10.i2.com (LOCALHOST)
MtxInit: -2 0 0
DpSysAdmExtCreate: ABAP is active
DpShMCreate: sizeof(wp_adm) 10528 (1316)
DpShMCreate: sizeof(tm_adm) 2969176 (14772)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (424)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 06DE0040, size: 3381680)
DpShMCreate: allocated sys_adm at 06DE0040
DpShMCreate: allocated wp_adm at 06DE1B88
DpShMCreate: allocated tm_adm_list at 06DE44A8
DpShMCreate: allocated tm_adm at 06DE44D0
DpShMCreate: allocated appc_ca_adm at 070BF0E8
DpShMCreate: allocated comm_adm_list at 070C1028
DpShMCreate: allocated comm_adm at 070C1040
DpShMCreate: allocated vmc_adm_list at 07107D10
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 07107D38
Tue Apr 17 08:37:40 2007
***LOG S30=> GwStopGateway, gateway stopped () [gwxxrd.c 13334]
Dev_Jcmon
trc file: "D:\usr\sap\XI3\DVEBMGS00\work\dev_jcmon", trc level: 1, release: "640"
node name : jcmon
pid : 4896
system name : XI3
system nr. : 00
started at : Mon Apr 16 00:03:28 2007
arguments :
arg[00] : D:\usr\sap/XI3/DVEBMGS00/j2ee/os_libs/jcmon.exe
arg[01] : pf=D:\usr\sap\XI3\SYS\profile/XI3_DVEBMGS00_dlwsdb10
[Thr 3668] Mon Apr 16 00:03:28 2007
[Thr 3668] INFO: Unknown property [box.number=XI3DVEBMGS00dlwsdb10]
[Thr 3668] INFO: Unknown property [ms.host=dlwsdb10]
[Thr 3668] INFO: Unknown property [ms.port=3601]
[Thr 3668] INFO: Unknown property [system.id=0]
JStartupReadInstanceProperties: read instance properties [D:\usr\sap\XI3\DVEBMGS00\j2ee\cluster\instance.properties;D:\usr\sap\XI3\DVEBMGS00\SDM\program\config\sdm_jstartup.properties]
-> ms host : dlwsdb10
-> ms port : 3601
-> OS libs : D:\usr\sap\XI3\DVEBMGS00\j2ee\os_libs
-> Admin URL :
-> run mode : normal
-> run action : NONE
-> enabled : yes
[Thr 3668] Mon Apr 16 00:03:29 2007
[Thr 3668] *** ERROR => Can't attach to administration shared memory (rc=3) [jcmonxx.c 217]
Please help me,
Regards,
Suresh.K -
SAP NetWeaver 7.0 ABAP Trial - service Disp+Work.Exe does not start
Hi All,
I have installed SAP NetWeaver 7.0 ABAP Trial Version on Windows Xp sp2.
But when I start sap management console, Disp+Work.Exe shows stopped and i am not able to connect through SAP login.
Any ideas?
Regards,
MindaugasThe hostname should have 13 caracters at maximum, you will need to remove your installation (use the process below), change the hostname and install it again. It happened with me and after done this process it worked fine.
How to uninstall :
- Drop database: In order to do that go to the Control Panel click on 'Add and Remove Programs' and look for 'MaxDB'. Click on 'Change/Remove' which starts the Installation Manager of the MaxDB. Click on 'Remove MaxDB Components', select 'All Components' and enter the database manager user 'control' and your <password>. Quitt the dialog popup with 'yes'.
- Stop SAPNSP_00 service Go to the Control Panel, click on 'Administrative Tools' and stop the SAPNSP_00 service.
- Remove in your file system the directories of 'SAP' and 'sapdb'. Go to 'Program Files/Common Files' and remove the directory 'Installshield'.
- Run the [clean up |http://www.sdn.sap.com/irj/sdn/softwaredownload?download=/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/business_packages/a1-8-4/nw/regcleantools.rar] tool for the registry, press the radio button for 'Uninstall Service', enter 'NSP' for SID and '00' for the number.
- Connect your PC to the network or install the loopback adapter.
- Reboot your PC. -
DB connect problem,Disp+Work.exe dies and the work processes die on startup
Dear Experts,
I am getting the error on SAP startup,Disp+Work.exe dies and the work processes die on startup.
I found below error in my DEV_W0 trace as below
*failed to establish conn to np:(local).*
*C Retrying without protocol specifier: (local)*
*C Provider SQLNCLI could not be initialized. See note #734034 for more information.*
*C Using provider SQLOLEDB instead.*
*C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']*
*C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.*
*C Procname: [ExecuteAndFlush - no proc]*
But i could see the user 'pec' is availble in my database users list with db_owner , public permissions also been assigned to it.
However When trying to delete a user on SQL server 2000, we recieve the message "You cannot drop the selected login ID because that login ID owns objects in one or more databases.".
Please refer the below work process trace and please suggest the possible solution..
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Sat Feb 14 15:10:21 2009
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\PEC\SYS\exe\run\dbmssslib.dll' ...
B Library 'E:\usr\sap\PEC\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'E:\usr\sap\PEC\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.195)
B New connection 0 created
M sysno 00
M sid PEC
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 196
M intno 20020600
M make: multithreaded, Unicode
M pid 3844
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3844) [dpxxdisp.c 1162]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 21120 (1320)
M DpShMCreate: sizeof(tm_adm) 29558776 (14772)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 1160000 (580)
M DpShMCreate: sizeof(vmc_adm) 0 (424)
M DpShMCreate: sizeof(wall_adm) (384056/329560/64/184)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 07800040, size: 31492672)
M DpShMCreate: allocated sys_adm at 07800040
M DpShMCreate: allocated wp_adm at 07801B88
M DpShMCreate: allocated tm_adm_list at 07806E08
M DpShMCreate: allocated tm_adm at 07806E30
M DpShMCreate: allocated wp_ca_adm at 09437628
M DpShMCreate: allocated appc_ca_adm at 0943D3E8
M DpShMCreate: allocated comm_adm_list at 0943F328
M DpShMCreate: allocated comm_adm at 0943F340
M DpShMCreate: allocated vmc_adm_list at 0955A680
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0955A6A8
M DpShMCreate: allocated wall_adm at 0955A6B0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Sat Feb 14 15:10:22 2009
M calling db_connect ...
C Thread ID:3868
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'E:\usr\sap\PEC\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 195
C patchcomment DBCON: database names must not start with digits (1078650)
C np:(local) connection used on CAMBSVR15
C CopyLocalParameters: dbuser is 'pec'
C
C Sat Feb 14 15:10:23 2009
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: MARS property was not set.
C
C Sat Feb 14 15:10:26 2009
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']
C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pec' failed -- connect terminated
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']
C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pec' failed -- connect terminated
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']
C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pec' failed -- connect terminated
C failed to establish conn to np:(local).
C Retrying without protocol specifier: (local)
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']
C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pec' failed -- connect terminated
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']
C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pec' failed -- connect terminated
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']
C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pec' failed -- connect terminated
C failed to establish conn. 0
B ***LOG BY2=> sql error 0 performing CON [dbsh#3 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> <message text not available> [dbsh#3 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 0 performing CON [dblink#3 @ 428] [dblink 0428 ]
B ***LOG BY0=> <message text not available> [dblink#3 @ 428] [dblink 0428 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1280]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9621]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server cambsvr15_PEC_00 on host cambsvr15 (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Sat Feb 14 15:10:26 2009
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9806
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 254]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3844) [dpnttool.c 357]
I would greatly appriciate your quick response, Since it is a production issue.
Many Thanks,
VinodHi Rohit and Subhadip,
My problem was solved, thanks for your effort.
reason is that, user 'pec' not been associated with login user for the SQL server.
subha : when i execute the first command which you suggested, but couldn't find any user's list.
so i didn't tried with the second command. just to give a final try i have executed the script like below and its worked out.
USE PEC
GO
EXEC sp_change_users_login 'update_one','pec','pec'
GO
Now i see that all work process are starting,,,thank you so much rohit and subhadip
I could have try this first ,when you guys suggested since i couldn't find any output with the first command i didn't proceed with second one.
Since deleting and creating method doesn't seems to be a good, i have just to give a try executed the second command and its worked.
Thanks for your time and patience
Many Thanks,
Vinod -
Reporting queued error faulting application disp+work.EXE
Hi,
Yesterday,the sap system was getting hung and users were not able to login to the application server.
All the work proceeses were in stopped state.
Once sap was restarted , sap started to work fine.
When i checked in logs, i found this error message "faulting application disp+work.EXE"..
Please guide.
Regards,
RajivProblem with your kernel.....
try upgrading the kernel once again, it must work.
Regards,
Nirmal.K -
Error with disp+work.exe in Cluster
Hi!
I have installed SAP Solution Manager 4.0 on Windows as MS Cluster.
After Kernel Upgrade the central instance (disp+work.exe) does not start and stopped after a while.
Fri Feb 22 16:04:13 2008
SAP HA Trace: Build in SAP Microsoft Cluster library '700, patch 148, changelist 963918' initialized
Initializing SAPControl Webservice
SapSSLInit failed => https support disabled
Starting WebService Named Pipe thread
Starting WebService thread
Webservice named pipe thread started, listening on port
.\pipe\sapcontrol_02
Webservice thread started, listening on port 50213
FRTG\sspadm is starting SAP System at 2008/02/22 16:04:53
SAP HA Trace: FindClusterResource: SAP resource not found [sapwinha.cpp, line 334]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_NOT_CLUSTERED [sapwinha.cpp, line 907]
FRTG\sspadm is stopping SAP System at 2008/02/22 16:08:07
Any helpful information will be appreciated.
Thank you
regardsThom,
Check this thread. Are you using a DB control in your start profile? The solution sounds suspicious but you might give it a try. They may have actually changed something else without informing the author.
Re: central instance error mscs abap unknown
jwise -
Error : disp+work.exe in stopped : Could not locate entry in sysdatabases
SM 3.2 was installed on SQL Server 2000.After trying to start SAP System via SAPMMC I saw that disp+work.exe can't start properly : after 3 seconds green light there appeared grey light. Message server and IGS WatchDog work OK -green light
Error in SAPMMC Syslog : "DB-Connect Failed, Return Code 000256".
SQL Server is running.
The log trans.log after running command "r3trans -d"
is following:
Could not locate entry in sysdatabases for database 'SMN'. No entry found with that name. Make sure that the name is entered correctly.
4 ETW000 147 0.031163
4 ETW000 [dev trc ,00000] sloledb.cpp [ExecuteAndFlush,line 5597]: Error/Message: (err 911, sev 0), Could not locate entry in sysdatabases for database 'SMN'. No entry found with that name. Make sure that the name is entered correctly.
4 ETW000 69 0.031232
4 ETW000 [dev trc ,00000] OpenOledbConnection : Failed to switch to specified database SMN
How could I solve this problem ?
Thank You!Thank You for helping me
dev_disp:
trc file: "dev_disp", trc level: 1, release: "640"
Fri Apr 28 14:22:48 2006
kernel runs with dp version 127000(ext=102000) (@(#) DPLIB-INT-VERSION-127000-UC)
length of sys_adm_ext is 524 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 10
intno 20020600
make: multithreaded, Unicode
pid 2996
***LOG Q00=> DpSapEnvInit, DPStart (00 2996) [dpxxdisp.c 1093]
shared lib "dw_xml.dll" version 10 successfully loaded
shared lib "dw_xtc.dll" version 10 successfully loaded
shared lib "dw_stl.dll" version 10 successfully loaded
shared lib "dw_gui.dll" version 10 successfully loaded
Fri Apr 28 14:22:52 2006
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3880]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 10528 (1316)
DpShMCreate: sizeof(tm_adm) 2506872 (12472)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 04320040, size: 2919328)
DpShMCreate: allocated sys_adm at 04320040
DpShMCreate: allocated wp_adm at 04321B58
DpShMCreate: allocated tm_adm_list at 04324478
DpShMCreate: allocated tm_adm at 043244A0
DpShMCreate: allocated wp_ca_adm at 04588518
DpShMCreate: allocated appc_ca_adm at 0458E2D8
DpShMCreate: allocated comm_adm_list at 04590218
DpShMCreate: allocated comm_adm at 04590230
DpShMCreate: allocated vmc_adm_list at 045D6F00
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 045D6F28
DpShMCreate: allocated wall_adm at 045D6F30
MBUF state OFF
Fri Apr 28 14:22:53 2006
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 1132 MB
<ES> 1131 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c 1455]
***LOG Q0K=> DpMsAttach, mscon ( r3demo24) [dpxxdisp.c 9701]
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 10
Release check o.K.
Fri Apr 28 14:23:33 2006
ERROR => W0 (pid 3932) died [dpxxdisp.c 12152]
ERROR => W1 (pid 2680) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3336) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 2072) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 940) died [dpxxdisp.c 12152]
ERROR => W5 (pid 900) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 2592) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 3420) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-3932 (SIGUSR2)
ERROR => DpWpKill(3932, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-2680 (SIGUSR2)
ERROR => DpWpKill(2680, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-3336 (SIGUSR2)
ERROR => DpWpKill(3336, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-2072 (SIGUSR2)
ERROR => DpWpKill(2072, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-940 (SIGUSR2)
ERROR => DpWpKill(940, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-900 (SIGUSR2)
ERROR => DpWpKill(900, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-2592 (SIGUSR2)
ERROR => DpWpKill(2592, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-3420 (SIGUSR2)
ERROR => DpWpKill(3420, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1649
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 28 14:23:43 2006
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Fri Apr 28 11:23:43 2006
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3932 Ended no 1 0 0
1 DIA 2680 Ended no 1 0 0
2 UPD 3336 Ended no 1 0 0
3 ENQ 2072 Ended no 1 0 0
4 BTC 940 Ended no 1 0 0
5 BTC 900 Ended no 1 0 0
6 SPO 2592 Ended no 1 0 0
7 UP2 3420 Ended no 1 0 0
Dispatcher Queue Statistics Fri Apr 28 11:23:43 2006
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Fri Apr 28 11:23:43 2006
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Apr 28 11:23:43 2006
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1649
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 28 14:23:48 2006
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (1412) (SOFT_KILL)
Stop icman
killing process (532) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:1412 HANDLE:1620)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1649
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 28 14:23:49 2006
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:1412 HANDLE:1620)
[DpProcDied] Process died (PID:532 HANDLE:1612)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'r3demo24'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9927]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1628
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2996) [dpxxdisp.c 8460]
Good Bye
<i><u><b>
dev_ms</b></u></i>
trc file: "dev_ms", trc level: 1, release: "640"
[Thr 3872] Fri Apr 28 14:22:47 2006
[Thr 3872] systemid 560 (PC with Windows NT)
[Thr 3872] relno 6400
[Thr 3872] patchlevel 0
[Thr 3872] patchno 7
[Thr 3872] intno 20020600
[Thr 3872] pid 3248
[Thr 3872] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 3248) [msxxserv.c 1638]
[Thr 3872] MsHttpInit: full qualified hostname = r3demo24
[Thr 3872] HTTP logging is switch off
[Thr 3872] set HTTP state to LISTEN
[Thr 3872] *** I listen to port sapmsSMN (3601) ***
[Thr 3872] *** HTTP port 8100 state LISTEN ***
[Thr 3872] CUSTOMER KEY: >J0370937238<
[Thr 3872] Fri Apr 28 14:23:49 2006
[Thr 3872] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from r3demo24_SMN_00 [msxxserv.c 4144]
[Thr 3872] Fri Apr 28 14:34:09 2006
[Thr 3872] *** ERROR => MsSCheckConnections: no response from client C1 (163.242.255.14) after 300 secs received [msxxserv.c 2879]
[Thr 3872] *** ERROR => MsSCheckConnections: disconnect now [163.242.255.14] [msxxserv.c 2883]
[Thr 3872] Fri Apr 28 15:41:11 2006
[Thr 3872] MsSExit: received SIGINT (2)
[Thr 3872] ***LOG Q02=> MsSHalt, MSStop (Msg Server 3248) [msxxserv.c 5189]
<u><i>dev_w0</i></u>
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Fri Apr 28 14:22:54 2006
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\SMN\SYS\exe\run\dbmssslib.dll' ...
B Library 'C:\usr\sap\SMN\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'C:\usr\sap\SMN\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.7)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 10
M intno 20020600
M make: multithreaded, Unicode
M pid 3932
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3932) [dpxxdisp.c 1153]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm) 10528 (1316)
M DpShMCreate: sizeof(tm_adm) 2506872 (12472)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 290000 (580)
M DpShMCreate: sizeof(vmc_adm) 0 (372)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 04320040, size: 2919328)
M DpShMCreate: allocated sys_adm at 04320040
M DpShMCreate: allocated wp_adm at 04321B58
M DpShMCreate: allocated tm_adm_list at 04324478
M DpShMCreate: allocated tm_adm at 043244A0
M DpShMCreate: allocated wp_ca_adm at 04588518
M DpShMCreate: allocated appc_ca_adm at 0458E2D8
M DpShMCreate: allocated comm_adm_list at 04590218
M DpShMCreate: allocated comm_adm at 04590230
M DpShMCreate: allocated vmc_adm_list at 045D6F00
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 045D6F28
M DpShMCreate: allocated wall_adm at 045D6F30
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Fri Apr 28 14:22:55 2006
M calling db_connect ...
C Warning: Env(MSSQL_SERVER) [r3demo24\SMN] <> Prof(dbs/mss/server) [r3demo24\smn]. Profile value will be used.
C Warning: Env(MSSQL_DBNAME) [SMN] <> Prof(dbs/mss/dbname) [smn]. Profile value will be used.
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'C:\usr\sap\SMN\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 7
C patchcomment MSSQL: Row handles must all be released (719273)
C Local connection used on R3DEMO24 to named instance: np:r3demo24\smn
C Using Provider SQLOLEDB
C ExecuteAndFlush return code: 0x80004005 Stmt: [use smn ]
C ExecuteAndFlush: line 5597. hr: 0x80004005 Could not locate entry in sysdatabases for database 'smn'. No entry found with that name. Make sure that the name is entered correctly.
C sloledb.cpp [ExecuteAndFlush,line 5597]: Error/Message: (err 911, sev 0), Could not locate entry in sysdatabases for database 'smn'. No entry found with that name. Make sure that the name is entered correctly.
C OpenOledbConnection : Failed to switch to specified database smn
C Using Provider SQLOLEDB
C ExecuteAndFlush return code: 0x80004005 Stmt: [use smn ]
C ExecuteAndFlush: line 5597. hr: 0x80004005 Could not locate entry in sysdatabases for database 'smn'. No entry found with that name. Make sure that the name is entered correctly.
C sloledb.cpp [ExecuteAndFlush,line 5597]: Error/Message: (err 911, sev 0), Could not locate entry in sysdatabases for database 'smn'. No entry found with that name. Make sure that the name is entered correctly.
C OpenOledbConnection : Failed to switch to specified database smn
C Using Provider SQLOLEDB
C ExecuteAndFlush return code: 0x80004005 Stmt: [use smn ]
C ExecuteAndFlush: line 5597. hr: 0x80004005 Could not locate entry in sysdatabases for database 'smn'. No entry found with that name. Make sure that the name is entered correctly.
C sloledb.cpp [ExecuteAndFlush,line 5597]: Error/Message: (err 911, sev 0), Could not locate entry in sysdatabases for database 'smn'. No entry found with that name. Make sure that the name is entered correctly.
C OpenOledbConnection : Failed to switch to specified database smn
C failed to establish conn to np:r3demo24\smn.
C Retrying without protocol specifier: r3demo24\smn
C Using Provider SQLOLEDB
C ExecuteAndFlush return code: 0x80004005 Stmt: [use smn ]
C ExecuteAndFlush: line 5597. hr: 0x80004005 Could not locate entry in sysdatabases for database 'smn'. No entry found with that name. Make sure that the name is entered correctly.
C sloledb.cpp [ExecuteAndFlush,line 5597]: Error/Message: (err 911, sev 0), Could not locate entry in sysdatabases for database 'smn'. No entry found with that name. Make sure that the name is entered correctly.
C OpenOledbConnection : Failed to switch to specified database smn
C Using Provider SQLOLEDB
C ExecuteAndFlush return code: 0x80004005 Stmt: [use smn ]
C ExecuteAndFlush: line 5597. hr: 0x80004005 Could not locate entry in sysdatabases for database 'smn'. No entry found with that name. Make sure that the name is entered correctly.
C sloledb.cpp [ExecuteAndFlush,line 5597]: Error/Message: (err 911, sev 0), Could not locate entry in sysdatabases for database 'smn'. No entry found with that name. Make sure that the name is entered correctly.
C OpenOledbConnection : Failed to switch to specified database smn
C Using Provider SQLOLEDB
C ExecuteAndFlush return code: 0x80004005 Stmt: [use smn ]
C ExecuteAndFlush: line 5597. hr: 0x80004005 Could not locate entry in sysdatabases for database 'smn'. No entry found with that name. Make sure that the name is entered correctly.
C sloledb.cpp [ExecuteAndFlush,line 5597]: Error/Message: (err 911, sev 0), Could not locate entry in sysdatabases for database 'smn'. No entry found with that name. Make sure that the name is entered correctly.
C OpenOledbConnection : Failed to switch to specified database smn
C failed to establish conn. 0
B ***LOG BY2=> sql error 0 performing CON [dbsh#1 @ 1200] [dbsh 1200 ]
B ***LOG BY0=> <message text not available> [dbsh#1 @ 1200] [dbsh 1200 ]
B ***LOG BY2=> sql error 0 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> <message text not available> [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1270]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9377]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server r3demo24_SMN_00 on host r3demo24 (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Fri Apr 28 14:22:55 2006
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9553
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 728]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 245]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3932) [dpnttool.c 357]
May be this information coul help
Thank You a lot! -
Disp+work.exe stopped after Kernel upgrade
Hi
I have put a new 700 unicode kernel 236 SAPEXE/SAPEXEDB and DW patch 258 lib_dbsl 256 onto the V6R1 database server. This worked fine and the instance starts up including DISPATCHER and SERVER0.
Next step was to update the kernel on the Windows application server, again to same level with igsexe 17 and sapwebdisp 258.
When I start the Windows instance, the sapcpe,exe executable copy completes, (no errors in sapcpe.log in the work directory), then the disp+work.exe tries to start and fails. It briefly shows "running but not connected to message server' then goes to Stopped. However the igswd.EXE goes green status Running.
The only error I can find in the work directory is in the stderr1 file which has the following messages- (the developer trace for disp+work last message was 10 hours ago when running on old kernel level).
Any advice? Tried search of sap notes but no result. I have tried a reboot of the Windows Server 2003 x 64 machine, still same error.
regards
Michael
Wed Jun 16 23:34:14 2010
ERROR => [CreateOsShm] CreateFileMapping(37,65 KB) failed with Err=5
ERROR_ACCESS_DENIED: Access is denied. [shmnt.c 2174]
ERROR => ShmCreate: Create (37,67072,1) failed [shmnt.c 506]
Memory diagnostic *
Systeminformation
Processor-Typ : Processor-Count : 2
Operating System : NT 5.2, Build 3790
Service Pack : Service Pack 2
NT Pagefile Informations
Config. minimum size : 37888000 K
Config. maximum size : 37888000 K
Avail. maximum size : 37888000 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
c:\pagefile.sys
17408000 K
17408000 K
17408000 K
17408000 K
2
e:\pagefile.sys
20480000 K
20480000 K
20480000 K
20480000 K
NT Task Manager Informations
Total Handles : 0
Total Threads : 0
Total Processes : 0
Commit Charge Total : 0 K
Commit Charge Limit : 0 K
Commit Charge Peak : 16 K
Phys.Memory Total : 0 K
Phys.Memory Available : 0 K
File Cache : 0 K
Kernel Memory Total : 0 K
Kernel Memory Paged : 0 K
Kernel Memory Nonpaged : 0 K
Memory usage of current process
Total virt.address space : 0000008589934464 K
Avail.virt.address space : 0000008589692256 K
Private Pages : 0 K
Total heap size : 12231 K
Virtual memory regions : 0 K
Uncommitted heap memory : 8164 K
Allocated heap memory : 2611 K
Moveable heap memory : 339 K
DDE shared heap memory : 0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
1344
sapstartsrv.exe
18788 K
18788 K
23812 K
23816 K
4
3308
disp+work.EXE
9360 K
9412 K
69620 K
69724 K
2
3304
igswd.EXE
3672 K
3964 K
2904 K
3268 K
1
1324
igsmux.exe
4096 K
4096 K
5952 K
5952 K
1
3256
igspw.exe
3100 K
3100 K
3708 K
3708 K
0
1000
igspw.exe
3100 K
3100 K
3708 K
3708 K
0
Sum
42116 K
109704 K
CrtOsSemAdm: Can't protect begin page (Ptr=FFFFFFFFFFFFF000,RC=87)
CrtOsSemAdm: Can't protect end page (Ptr=000000000000F000,RC=487)
call semaphore clean-up function ...
***LOG Q0E=> DpSigGenHandler, Exception (c0000005) [dpnttool.c 438]
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c0000005 (Access Violation)
App : disp+work.EXE (pid=3308)
When : 6/16/2010 23:34:16.631
Threads : 1
Computer Name : OLTOVMDQ
User Name : SAPSeOAE
Number of Processors: 2
Processor Type: EM64T Family 6 Model 15 Stepping 11
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id cf0
--> (FAULT) Stack Back Trace <--
FramePtr ReturnAd Param#1 Function Name
000000000840fe40 0000000000464b36 0000000000000510 disp+work!SemInit [semnt.c (866)]
000000000840feb0 0000000000430611 ffffffff00000001 disp+work!DpShmPrfCreate [dpxxprf.c (399)]
000000000840fee0 000000000040108d ffffffff00000002 disp+work!DpMain [dpxxdisp.c (1097)]
000000000840ff10 0000000001a5df51 0000000000000000 disp+work!nlsui_main [thxxanf.c (84)]
000000000840ff70 0000000077d5964c 0000000000000000 disp+work!wmainCRTStartup [crtexe.c (498)]
000000000840ffa0 0000000000000000 0000000001a5dde0 kernel32!BaseProcessStart
Wed Jun 16 23:34:17 2010
call clean-up function ...
ERROR => SigICallExitRoutine: not initialized [signt.c 304]
return from clean-up function ...> Wed Jun 16 23:34:14 2010
> *** ERROR => [CreateOsShm] CreateFileMapping(37,65 KB) failed with Err=5
> ERROR_ACCESS_DENIED: Access is denied. [shmnt.c 2174]
> *** ERROR => ShmCreate: Create (37,67072,1) failed [shmnt.c 506]
If you switch back to the old kernel, does that work?
The system tries to allocate shared memory and fails. Did you install any security patches on the Windows box or did you change/fiddle with the users?
Markus -
Disp+work.EXE in SAPMMC
Hi ,
I have successfully installed SAPNETWEAVER 7.01 ABAP trial version.
When i see the process list msg_server.EXE under the sapmmc it is showing the status as Running but the disp+work.EXE under the same is showing status as 'Running but Message Server unreachable '.
When i tried creating a program in se38 and tried saving it is giving a error message 'No update server found for context'.
What can be the error for the same and how to get it done.
Thanks in advance for the replies.
Regards,
AnujHi KC ,
I faced this problem everytime i shut my machine down. The application server gets shutdown.When i try starting the application server it gives me a eror message saying 'Start database failed'.
Search for " startengine.exe " and " disp+work.exe " in the folder NSP that was created when you installed the SAP on your system. Double click on the startengine first and then disp+work you will see that in the SAPMMC under the process list all the icons will get turned to green and you can successfully logon to SAP and create programs etc.
I will give you the exact location of the EXEs once i am on my system probably by the EOD.
Hope this solves ur query.
Regards,
Anuj -
Disp+work.exe in J2EE stopps.
Hi! I have problem by starting the J2EE-Engine. The disp+work.exe tells "Running but not connected to the Message Server". The r3trans -x runs without errors.
Here is my dev_disp.
<b>Please can someone helo with this issue?</b>
Thanks!
regards
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid SSM
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, optimized
pid 3408
Mon Jun 25 12:37:08 2007
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 3408) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Mon Jun 25 12:37:12 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >OLDA8010_SSM_01 <
DpShMCreate: sizeof(wp_adm) 12672 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05F30040, size: 4647736)
DpShMCreate: allocated sys_adm at 05F30040
DpShMCreate: allocated wp_adm at 05F31E40
DpShMCreate: allocated tm_adm_list at 05F34FC0
DpShMCreate: allocated tm_adm at 05F34FF0
DpShMCreate: allocated wp_ca_adm at 06304290
DpShMCreate: allocated appc_ca_adm at 0630A050
DpShMCreate: allocated comm_adm at 0630BF90
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0638CE50
DpShMCreate: allocated gw_adm at 0638CE90
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0638CEC0
DpShMCreate: allocated wall_adm at 0638CEC8
MBUF state OFF
DpCommInitTable: init table for 500 entries
Mon Jun 25 12:37:13 2007
ERROR => DpRqQInit: ShmCreate rc=4, key=31 [dpxxqueu.c 309]
DP_FATAL_ERROR => DpSapEnvInit: DpRqQInit
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 25 12:37:23 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Jun 25 10:37:23 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
0 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
1 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
2 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
3 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
4 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
5 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
6 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
7 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
8 ? -1 Free no 0 0 0
Dispatcher Queue Statistics Mon Jun 25 10:37:23 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
ERROR => DpMQueueInfo: DpQueueInfo [dpxxtool.c 2029]
Dump of tm_adm structure: Mon Jun 25 10:37:23 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
call semaphore clean-up function ...
***LOG Q0E=> DpSigGenHandler, Exception (c0000005) [dpnttool.c 432]
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c0000005 (Access Violation)
App : disp+work.EXE (pid=3408)
When : 6/25/2007 12:37:23.261
Threads : 2
Computer Name : OLDA8010
User Name : SAPServiceSSM
Number of Processors: 4
Processor Type: x86 Family 15 Model 4 Stepping 10
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id ebc
eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 esi=00000003 edi=00439f3f
eip=0043f3a9 esp=0549f3b8 ebp=0549f3c0 iopl=0 nv up ei pl nz ac po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00010216
function : DpWpBlksInQueue
0043f39e 55 push ebp
0043f39f 8bec mov ebp,esp
0043f3a1 51 push ecx
0043f3a2 51 push ecx
0043f3a3 8b0d18257002 mov ecx,[queue (02702518)] ds:02702518=00000000
FAULT-> 0043f3a9 8b413c mov eax,[ecx+0x3c] ds:0549d3b6=40498b3c
0043f3ac 8b4940 mov ecx,[ecx+0x40] ds:0549d3b6=72c13b40
0043f3af 3bc1 cmp eax,ecx
0043f3b1 7204 jb DpWpBlksInQueue+0x19 (0043f3b7)
0043f3b3 2bc1 sub eax,ecx
0043f3b5 eb03 jmp DpWpBlksInQueue+0x1c (0043f3ba)
0043f3b7 2bc1 sub eax,ecx
0043f3b9 48 dec eax
0043f3ba 8b0d1c257002 mov ecx,[queue+0x4 (0270251c)] ds:0270251c=00000000
0043f3c0 8945f8 mov [ebp+0xf8],eax ss:0a93c776=????????
0043f3c3 8b413c mov eax,[ecx+0x3c] ds:0549d3b6=40498b3c
0043f3c6 8b4940 mov ecx,[ecx+0x40] ds:0549d3b6=72c13b40
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0549f3c0 00439cee 00439f3f 00200020 00200020 00200020 disp+work!DpWpBlksInQueue [dpxxqueu.c (1141)]
0549f464 0041524c 7c38b548 00000003 7c38b548 00000003 disp+work!DpTrcWpCaInfo [dpxxtool.c (2103)]
0549fc98 004189c9 01c43b24 01c432b4 00000001 00000000 disp+work!DpFatalErr [dpxxdisp.c (17473)]
0549ff00 004214c3 00000000 00000000 7ffd9000 0549ff60 disp+work!DpSapEnvInit [dpxxdisp.c (1422)]
0549ff14 00401080 00000002 05636850 00000001 00000000 disp+work!DpMain [dpxxdisp.c (1074)]
0549ff60 011bf720 00000002 05636850 056376f0 01c05000 disp+work!nlsui_main [thxxanf.c (82)]
0549ffc0 77e523cd 00000000 00000000 7ffd9000 00000246 disp+work!wmainCRTStartup [crtexe.c (395)]
0549fff0 00000000 011bf5dd 00000000 00905a4d 00000003 kernel32!IsProcessorFeaturePresent
State Dump for Thread Id 1fac
eax=00000001 ebx=00000103 ecx=fffffffe edx=05630000 esi=00000000 edi=00000000
eip=7c82ed54 esp=0770fec0 ebp=0770ff04 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:0770fec0=7c821514
7c82ed5c 8d642400 lea esp,[esp] ss:0cbad277=????????
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0770ff04 0110e0b7 000006d0 00000000 00000000 0563a448 ntdll!KiFastSystemCallRet
0770ff84 7c349565 00000000 00000000 00000000 0563a3b0 disp+work!SigIMsgFunc [signt.c (594)]
0770ffb8 77e66063 0563a3b0 00000000 00000000 0563a3b0 MSVCR71!endthreadex
0770ffec 00000000 7c3494f6 0563a3b0 00000000 00000000 kernel32!GetModuleFileNameA
call clean-up function ...
SigICallExitRoutine: call exithandler (DpHalt)
DpHalt: shutdown server >OLDA8010_SSM_01 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp'sHi KC ,
I faced this problem everytime i shut my machine down. The application server gets shutdown.When i try starting the application server it gives me a eror message saying 'Start database failed'.
Search for " startengine.exe " and " disp+work.exe " in the folder NSP that was created when you installed the SAP on your system. Double click on the startengine first and then disp+work you will see that in the SAPMMC under the process list all the icons will get turned to green and you can successfully logon to SAP and create programs etc.
I will give you the exact location of the EXEs once i am on my system probably by the EOD.
Hope this solves ur query.
Regards,
Anuj -
Disp+work.exe is stopped
Hi,
We installed the solution manager EHP1 (windows 2008 with mssql 2008) on distributed environment successfully i.e. application server and database server are diffrent servers on 2 days back.we logged inthe server and completed sgen and local client copy successfully.
today when iam stop and start the SAP MMC disp+work.exe is not started and it goes grey mode.i upgraded the kernel still same problem.here iam sending the dev_wo log,guide me for the same.
M sysno 01
M sid MSL
M systemid 562 (PC with Windows NT)
M relno 7010
M patchlevel 0
M patchno 111
M intno 20020600
M make: multithreaded, Unicode, 64 bit, optimized
M pid 2520
M Tue Jun 28 20:30:07 2011
M kernel runs with dp version 244000(ext=110000) (@(#) DPLIB-INT-VERSION-244000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2520) [dpxxdisp.c 1349]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 29792 (1752)
M DpShMCreate: sizeof(tm_adm) 5912704 (29416)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000A600050, size: 6614144)
M DpRqQInit: Parameter rdisp/queue_lock_level = 2
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M ThInit: rdisp/cleanup_after_crash = 1
M ThInit: running on host msom1sap04
M calling db_connect ...
B Loading DB library 'E:\usr\sap\MSL\DVEBMGS01\exe\dbmssslib.dll' ...
B Library 'E:\usr\sap\MSL\DVEBMGS01\exe\dbmssslib.dll' loaded
B Version of 'E:\usr\sap\MSL\DVEBMGS01\exe\dbmssslib.dll' is "700.08", patchlevel (0.105)
C
C Tue Jun 28 20:30:08 2011
C Callback functions for dynamic profile parameter registered
C Thread ID:2848
C Thank You for using the SLODBC-interface
C Using dynamic link library 'E:\usr\sap\MSL\DVEBMGS01\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C SAP patchlevel 0
C SAP patchno 111
C Last MSSQL DBSL patchlevel 0
C Last MSSQL DBSL patchno 105
C Last MSSQL DBSL patchcomment MSSQL: Unicode literals and standalone tools (1494847)
C Network connection used from msom1sap04 to AEOM1SAP04\MSL using tcp:AEOM1SAP04\MSL
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2259]
C (-2146893020) [HY000] [Microsoft][SQL Server Native Client 10.0]SQL Server Network Interfaces: The clocks on the client and server machines are skewed.
C
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2259]
C (-2146893020) [HY000] [Microsoft][SQL Server Native Client 10.0]Cannot generate SSPI context
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2259]
C (-2146893020) [HY000] [Microsoft][SQL Server Native Client 10.0]SQL Server Network Interfaces: The clocks on the client and server machines are skewed.
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2259]
C (-2146893020) [HY000] [Microsoft][SQL Server Native Client 10.0]Cannot generate SSPI context
C Connection 0 failed using Driver={SQL Server Native Client 10.0};Server=AEOM1SAP04\MSL;AutoTranslate=no;Trusted_Connection=yes;WSID=msom1sap04;APP=R3D00 comm rd ODBC;Database=MSL;
C
B ***LOG BY2=> sql error -21468 performing CON [dbsh#2 @ 1208] [dbsh 1208 ]
B ***LOG BY0=> [Microsoft][SQL Server Native Client 10.0]SQL Server Network Interfaces: The clocks on the client and server machines are skewed.
[dbsh#2 @ 1208] [dbsh 1208 ]
B ***LOG BY2=> sql error -21468 performing CON [dblink#4 @ 433] [dblink 0433 ]
B ***LOG BY0=> [Microsoft][SQL Server Native Client 10.0]SQL Server Network Interfaces: The clocks on the client and server machines are skewed.d pavani wrote:
> The clocks on the client and server machines are skewed.
Hi,
Could you please check on below points. This might help you.
1: As mentioned in error message, issue might be in time differences at server level between your CI and app server.
You can check the same by executing 'date' command on CI and app server at the same time. Both the servers should be attached to same NTP server.
2: Try with restarting the sapservices as well. As you have done kernel upgrade. sapservice should be restarted as well.
3: Delete entries from SMLG --> Go to --> system diagnosis --> Message server status area
delete entries from here, and try restarting app server completely using sapservice.
This should help you. Let me know if you identify any other error message.
Cheers !!!!
Ashish -
Disp+work.EXE Dispatcher Stopped - error
Hi Experts,
When I starting the SAP Solution Manager / WINDOWS 2003 Server x64, In SAPMMC Console, disp+work.exe process shows an error, it not display a error, but simply donu00B4t start (donu00B4t show the green semaphore but instead it show the gray semaphore state). So the systems canu00B4t start with this error!
What I have to make for correct this issue!?
I check some posts sent by some users in SDN with seem error and almost all of them tell check the dev_disp ; dev_w0 and sapstartsrv (which I check in directory G:\usr\sap\<SID>\...\work). Sorry about the extension of this message, but is a truly copy from this three logs, which I think are the most important in this kind of error...
Kindly help me how to solve this issue, so nest, I show you the content of that three log files.
dev_disp
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid SSM
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 159
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 3852
Thu Dec 04 15:04:00 2008
kernel runs with dp version 237000(ext=110000) (@(#) DPLIB-INT-VERSION-237000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3852) [dpxxdisp.c 1254]
shared lib "dw_xml.dll" version 159 successfully loaded
shared lib "dw_xtc.dll" version 159 successfully loaded
shared lib "dw_stl.dll" version 159 successfully loaded
shared lib "dw_gui.dll" version 159 successfully loaded
shared lib "dw_mdm.dll" version 159 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Thu Dec 04 15:04:04 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5403]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >ptresapsm_SSM_00 <
DpShMCreate: sizeof(wp_adm) 27472 (1616)
DpShMCreate: sizeof(tm_adm) 5912624 (29416)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EF60050, size: 6611392)
DpShMCreate: allocated sys_adm at 000000000EF60050
DpShMCreate: allocated wp_adm at 000000000EF62150
DpShMCreate: allocated tm_adm_list at 000000000EF68CA0
DpShMCreate: allocated tm_adm at 000000000EF68D00
DpShMCreate: allocated wp_ca_adm at 000000000F50C530
DpShMCreate: allocated appc_ca_adm at 000000000F5122F0
DpShMCreate: allocated comm_adm at 000000000F514230
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F59AEC0
DpShMCreate: allocated gw_adm at 000000000F59AF40
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F59AF70
DpShMCreate: allocated wall_adm at 000000000F59AF80
MBUF state OFF
DpCommInitTable: init table for 500 entries
Thu Dec 04 15:04:05 2008
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 5119MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 5120MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1279 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 2520
argv[0] = G:\usr\sap\SSM\DVEBMGS00\exe\jcontrol.EXE
argv[1] = G:\usr\sap\SSM\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=G:\usr\sap\SSM\SYS\profile\SSM_DVEBMGS00_ptresapsm
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=SSM
argv[7] = -DSAPMYNAME=ptresapsm_SSM_00
argv[8] = -DSAPPROFILE=G:\usr\sap\SSM\SYS\profile\SSM_DVEBMGS00_ptresapsm
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1656]
***LOG Q0K=> DpMsAttach, mscon ( ptresapsm) [dpxxdisp.c 11937]
DpStartStopMsg: send start message (myname is >ptresapsm_SSM_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 159
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Thu Dec 04 15:04:09 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 256
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1408) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2520)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Dec 04 15:04:45 2008
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 04 15:04:55 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Dec 04 15:04:55 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2460 Ended no 1 0 0
1 DIA 3968 Ended no 1 0 0
2 DIA 1628 Ended no 1 0 0
3 DIA 2840 Ended no 1 0 0
4 DIA 3100 Ended no 1 0 0
5 DIA 3392 Ended no 1 0 0
6 DIA 3692 Ended no 1 0 0
7 DIA 1612 Ended no 1 0 0
8 DIA 2344 Ended no 1 0 0
9 DIA 2256 Ended no 1 0 0
10 UPD 3948 Ended no 1 0 0
11 ENQ 1552 Ended no 1 0 0
12 BTC 2984 Ended no 1 0 0
13 BTC 1696 Ended no 1 0 0
14 BTC 2716 Ended no 1 0 0
15 SPO 2920 Ended no 1 0 0
16 UP2 1692 Ended no 1 0 0
Dispatcher Queue Statistics Thu Dec 04 15:04:55 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Thu Dec 04 15:04:55 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Dec 04 15:04:55 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 04 15:05:00 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >ptresapsm_SSM_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (3992) (SOFT_KILL)
Stop icman
killing process (604) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:3992 HANDLE:372)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 04 15:05:01 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3992 HANDLE:372)
wait for end of icman
[DpProcDied] Process lives (PID:604 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 04 15:05:02 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:604 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 04 15:05:03 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:604 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 04 15:05:04 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:604 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 04 15:05:05 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:604 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 04 15:05:06 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:604 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 04 15:05:07 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:604 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 04 15:05:08 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:604 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 04 15:05:09 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:604 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 04 15:05:10 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:604 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 04 15:05:11 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:604 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 04 15:05:12 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:604 HANDLE:384)
[DpProcDied] Process died (PID:2520 HANDLE:356)
DpStartStopMsg: send stop message (myname is >ptresapsm_SSM_00 <)
NiIMyHostName: hostname = 'ptresapsm'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Thu Dec 04 15:05:13 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12283]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 280 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 280 (pos=3)
SiSelNRemove: removed sock 280
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 280
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3852) [dpxxdisp.c 10484]
Good Bye .....
dev_w0
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Dec 04 15:04:05 2008
B create_con (con_name=R/3)
B Loading DB library 'G:\usr\sap\SSM\DVEBMGS00\exe\dbmssslib.dll' ...
B Library 'G:\usr\sap\SSM\DVEBMGS00\exe\dbmssslib.dll' loaded
B Version of 'G:\usr\sap\SSM\DVEBMGS00\exe\dbmssslib.dll' is "700.08", patchlevel (0.158)
B New connection 0 created
M sysno 00
M sid SSM
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 159
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 2460
M
M kernel runs with dp version 237000(ext=110000) (@(#) DPLIB-INT-VERSION-237000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2460) [dpxxdisp.c 1316]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 27472 (1616)
M DpShMCreate: sizeof(tm_adm) 5912624 (29416)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000010F60050, size: 6611392)
M DpShMCreate: allocated sys_adm at 0000000010F60050
M DpShMCreate: allocated wp_adm at 0000000010F62150
M DpShMCreate: allocated tm_adm_list at 0000000010F68CA0
M DpShMCreate: allocated tm_adm at 0000000010F68D00
M DpShMCreate: allocated wp_ca_adm at 000000001150C530
M DpShMCreate: allocated appc_ca_adm at 00000000115122F0
M DpShMCreate: allocated comm_adm at 0000000011514230
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000001159AEC0
M DpShMCreate: allocated gw_adm at 000000001159AF40
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000001159AF70
M DpShMCreate: allocated wall_adm at 000000001159AF80
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Dec 04 15:04:06 2008
M ThInit: running on host ptresapsm
M
M Thu Dec 04 15:04:07 2008
M calling db_connect ...
C Thread ID:2168
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'G:\usr\sap\SSM\DVEBMGS00\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 158
C patchcomment Corrections of odbc-based dbsl: dsql: optype, DSN (1135165)
C np:(local) connection used on PTRESAPSM
C CopyLocalParameters: dbuser is 'ssm'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Provider Release:9.00.3042.00
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ERROR: schema user ssm has administrator fixed server role (user_name() is 'dbo').
C This is not allowed. Please check the Server Roles of user ssm.
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1440]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10504]
M
M Info for wp 0
M
M pid = 2460
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ptresapsm_SSM_00 on host ptresapsm (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Dec 04 15:04:07 2008
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10724
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2460) [dpnttool.c 333]
sapstartsrv
trc file: "sapstartsrv.log", trc level: 0, release: "700"
pid 3236
Thu Dec 04 15:00:12 2008
SAP HA Trace: Build in SAP Microsoft Cluster library '700, patch 159, changelist 981833' initialized
Initializing SAPControl Webservice
SapSSLInit failed => https support disabled
Starting WebService Named Pipe thread
Starting WebService thread
Webservice named pipe thread started, listening on port
.\pipe\sapcontrol_00
Webservice thread started, listening on port 50013
PTRESAPSM\ssmadm is starting SAP System at 2008/12/04 15:01:40
SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 212]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 907]
PTRESAPSM\ssmadm is stopping SAP System at 2008/12/04 15:03:35
SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 212]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 907]
PTRESAPSM\ssmadm is starting SAP System at 2008/12/04 15:03:55
Finish
Help me please...
If you want more log files.... or another information tell me OK??!! TKS
Best Regards,
Thanks in advance,
Joao DimasHello Markus Doehr,
Thanks for help me... Next Iu00B4m going put the log files that you recommend me to check and also the dev_jcontrol which I think is important to check... I donu00B4t really know...
dev_jcontrol
dev_bootstrap
dev_server0
std_server0.out
Iu00B4m newest in SAP... so I still have problems to verify/check the log files... I donu00B4t have the sensibility for discover the issues in log... in error... etc
Can you tell me if there is any problem / error in that log files...?! Thanks in advance!!
_________ || _____________ || ______________ || _____________
trc file: "G:\usr\sap\SSM\DVEBMGS00\work\dev_jcontrol", trc level: 1, release: "700"
node name : jcontrol
pid : 3492
system name : SSM
system nr. : 00
started at : Fri Dec 05 10:56:56 2008
arguments :
arg[00] : G:\usr\sap\SSM\DVEBMGS00\exe\jcontrol.EXE
arg[01] : pf=G:\usr\sap\SSM\SYS\profile\SSM_DVEBMGS00_ptresapsm
arg[02] : -DSAPSTART=1
arg[03] : -DCONNECT_PORT=64990
arg[04] : -DSAPSYSTEM=00
arg[05] : -DSAPSYSTEMNAME=SSM
arg[06] : -DSAPMYNAME=ptresapsm_SSM_00
arg[07] : -DSAPPROFILE=G:\usr\sap\SSM\SYS\profile\SSM_DVEBMGS00_ptresapsm
arg[08] : -DFRFC_FALLBACK=ON
arg[09] : -DFRFC_FALLBACK_HOST=localhost
[Thr 3508] Fri Dec 05 10:56:56 2008
[Thr 3508] *** WARNING => INFO: Unknown property [instance.box.number=SSMDVEBMGS00ptresapsm] [jstartxx.c 841]
[Thr 3508] *** WARNING => INFO: Unknown property [instance.en.host=ptresapsm] [jstartxx.c 841]
[Thr 3508] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c 841]
[Thr 3508] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties;G:\usr\sap\SSM\DVEBMGS00\SDM\program\config\sdm_jstartup.properties]
-> ms host : ptresapsm
-> ms port : 3901
-> OS libs : G:\usr\sap\SSM\DVEBMGS00\j2ee\os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
-> files [01] : G:\usr\sap\SSM\DVEBMGS00\SDM\program\config\sdm_jstartup.properties
Instance properties
-> ms host : ptresapsm
-> ms port : 3901
-> os libs : G:\usr\sap\SSM\DVEBMGS00\j2ee\os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] bootstrap_ID1583200 : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
-> [02] bootstrap_ID1583250 : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID1583200 : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] ID1583250 : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
-> [02] sdm : G:\usr\sap\SSM\DVEBMGS00\SDM\program\config\sdm_jstartup.properties
[Thr 3508] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
[Thr 1620] JControlDPMessageProxy: Thread 1620 started as handler thread for R/3 dispatcher messages.
[Thr 3508] [Node: bootstrap] java home is set by profile parameter
Java Home: C:\j2sdkx64
[Thr 3508] JStartupICheckFrameworkPackage: can't find framework package G:\usr\sap\SSM\DVEBMGS00\exe\jvmx.jar
JStartupIReadSection: read node properties [bootstrap]
-> node name : bootstrap
-> node type : bootstrap
-> node execute : yes
-> java path : C:\j2sdkx64
-> java parameters : -Djco.jarm=1
-> java vm version : 1.4.2_17-b06
-> java vm vendor : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : amd64
-> heap size : 256M
-> root path : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster
-> class path : .\bootstrap\launcher.jar
-> OS libs path : G:\usr\sap\SSM\DVEBMGS00\j2ee\os_libs
-> main class : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : G:\usr\sap\SSM\DVEBMGS00\exe\jstartup.jar;G:\usr\sap\SSM\DVEBMGS00\exe\jvmx.jar
-> parameters : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0015832
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
JControlStartJLaunch: program = G:\usr\sap\SSM\DVEBMGS00\exe\jlaunch.exe
-> arg[00] = G:\usr\sap\SSM\DVEBMGS00\exe\jlaunch.exe
-> arg[01] = pf=G:\usr\sap\SSM\SYS\profile\SSM_DVEBMGS00_ptresapsm
-> arg[02] = -DSAPINFO=SSM_00_bootstrap
-> arg[03] = -nodeId=-1
-> arg[04] = -file=G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_3492
-> arg[06] = -nodeName=bootstrap
-> arg[07] = -jvmOutFile=G:\usr\sap\SSM\DVEBMGS00\work\jvm_bootstrap.out
-> arg[08] = -stdOutFile=G:\usr\sap\SSM\DVEBMGS00\work\std_bootstrap.out
-> arg[09] = -locOutFile=G:\usr\sap\SSM\DVEBMGS00\work\dev_bootstrap
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=G:\usr\sap\SSM\SYS\profile\SSM_DVEBMGS00_ptresapsm
-> arg[12] = -DSAPSTART=1
-> arg[13] = -DCONNECT_PORT=1302
-> arg[14] = -DSAPSYSTEM=00
-> arg[15] = -DSAPSYSTEMNAME=SSM
-> arg[16] = -DSAPMYNAME=ptresapsm_SSM_00
-> arg[17] = -DSAPPROFILE=G:\usr\sap\SSM\SYS\profile\SSM_DVEBMGS00_ptresapsm
-> arg[18] = -DFRFC_FALLBACK=ON
-> arg[19] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = PATH=C:\j2sdkx64\jre\bin\server;C:\j2sdkx64\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdkx64\bin;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;G:\usr\sap\SSM\SYS\exe\uc\NTAMD64
-> exe path = PATH=C:\j2sdkx64\bin;G:\usr\sap\SSM\DVEBMGS00\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdkx64\bin;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;G:\usr\sap\SSM\SYS\exe\uc\NTAMD64
[Thr 3508] Fri Dec 05 10:56:59 2008
[Thr 3508] *** ERROR => invalid return code of process [bootstrap] (exitcode = 66) [jstartxx.c 1642]
[Thr 3508] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc = 66)
[Thr 3508] JControlCloseProgram: started (exitcode = 66)
[Thr 3508] JControlCloseProgram: good bye... (exitcode = 66)
trc file: "G:\usr\sap\SSM\DVEBMGS00\work\dev_bootstrap", trc level: 1, release: "700"
node name : bootstrap
pid : 4028
system name : SSM
system nr. : 00
started at : Fri Dec 05 10:56:56 2008
arguments :
arg[00] : G:\usr\sap\SSM\DVEBMGS00\exe\jlaunch.exe
arg[01] : pf=G:\usr\sap\SSM\SYS\profile\SSM_DVEBMGS00_ptresapsm
arg[02] : -DSAPINFO=SSM_00_bootstrap
arg[03] : pf=G:\usr\sap\SSM\SYS\profile\SSM_DVEBMGS00_ptresapsm
arg[04] : -DSAPSTART=1
arg[05] : -DCONNECT_PORT=1302
arg[06] : -DSAPSYSTEM=00
arg[07] : -DSAPSYSTEMNAME=SSM
arg[08] : -DSAPMYNAME=ptresapsm_SSM_00
arg[09] : -DSAPPROFILE=G:\usr\sap\SSM\SYS\profile\SSM_DVEBMGS00_ptresapsm
arg[10] : -DFRFC_FALLBACK=ON
arg[11] : -DFRFC_FALLBACK_HOST=localhost
[Thr 2592] Fri Dec 05 10:56:56 2008
[Thr 2592] *** WARNING => INFO: Unknown property [instance.box.number=SSMDVEBMGS00ptresapsm] [jstartxx.c 841]
[Thr 2592] *** WARNING => INFO: Unknown property [instance.en.host=ptresapsm] [jstartxx.c 841]
[Thr 2592] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c 841]
[Thr 2592] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties]
-> ms host : ptresapsm
-> ms port : 3901
-> OS libs : G:\usr\sap\SSM\DVEBMGS00\j2ee\os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
Instance properties
-> ms host : ptresapsm
-> ms port : 3901
-> os libs : G:\usr\sap\SSM\DVEBMGS00\j2ee\os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] bootstrap_ID1583200 : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
-> [02] bootstrap_ID1583250 : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID1583200 : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] ID1583250 : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
[Thr 2592] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 2592] JLaunchRequestQueueInit: create pipe listener thread
[Thr 3484] JLaunchRequestFunc: Thread 3484 started as listener thread for np messages.
[Thr 4020] WaitSyncSemThread: Thread 4020 started as semaphore monitor thread.
[Thr 2592] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
[Thr 2592] CPIC (version=700.2006.09.13)
[Thr 2592] [Node: bootstrap] java home is set by profile parameter
Java Home: C:\j2sdkx64
[Thr 2592] JStartupICheckFrameworkPackage: can't find framework package G:\usr\sap\SSM\DVEBMGS00\exe\jvmx.jar
JStartupIReadSection: read node properties [bootstrap]
-> node name : bootstrap
-> node type : bootstrap
-> node execute : yes
-> java path : C:\j2sdkx64
-> java parameters : -Djco.jarm=1
-> java vm version : 1.4.2_17-b06
-> java vm vendor : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : amd64
-> heap size : 256M
-> root path : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster
-> class path : .\bootstrap\launcher.jar
-> OS libs path : G:\usr\sap\SSM\DVEBMGS00\j2ee\os_libs
-> main class : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : G:\usr\sap\SSM\DVEBMGS00\exe\jstartup.jar;G:\usr\sap\SSM\DVEBMGS00\exe\jvmx.jar
-> parameters : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0015832
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
[Thr 2580] JLaunchIStartFunc: Thread 2580 started as Java VM thread.
[Thr 2580] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
Java Parameters: -Xss2m
JHVM_LoadJavaVM: VM Arguments of node [bootstrap]
-> stack : 1048576 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -Djco.jarm=1
-> arg[ 4]: -Dsys.global.dir=G:\usr\sap\SSM\SYS\global
-> arg[ 5]: -Dapplication.home=G:\usr\sap\SSM\DVEBMGS00\exe
-> arg[ 6]: -Djava.class.path=G:\usr\sap\SSM\DVEBMGS00\exe\jstartup.jar;G:\usr\sap\SSM\DVEBMGS00\exe\jvmx.jar;.\bootstrap\launcher.jar
-> arg[ 7]: -Djava.library.path=C:\j2sdkx64\jre\bin\server;C:\j2sdkx64\jre\bin;C:\j2sdkx64\bin;G:\usr\sap\SSM\DVEBMGS00\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdkx64\bin;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;G:\usr\sap\SSM\SYS\exe\uc\NTAMD64
-> arg[ 8]: -Dmemory.manager=256M
-> arg[ 9]: -Xmx256M
-> arg[ 10]: -DLoadBalanceRestricted=no
-> arg[ 11]: -Djstartup.mode=BOOTSTRAP
-> arg[ 12]: -Djstartup.ownProcessId=4028
-> arg[ 13]: -Djstartup.ownHardwareId=O0010092564
-> arg[ 14]: -Djstartup.whoami=bootstrap
-> arg[ 15]: -Djstartup.debuggable=yes
-> arg[ 16]: -Xss2m
-> arg[ 17]: -DSAPINFO=SSM_00_bootstrap
-> arg[ 18]: -DSAPSTART=1
-> arg[ 19]: -DCONNECT_PORT=1302
-> arg[ 20]: -DSAPSYSTEM=00
-> arg[ 21]: -DSAPSYSTEMNAME=SSM
-> arg[ 22]: -DSAPMYNAME=ptresapsm_SSM_00
-> arg[ 23]: -DSAPPROFILE=G:\usr\sap\SSM\SYS\profile\SSM_DVEBMGS00_ptresapsm
-> arg[ 24]: -DFRFC_FALLBACK=ON
-> arg[ 25]: -DFRFC_FALLBACK_HOST=localhost
-> arg[ 26]: -DSAPSTARTUP=1
-> arg[ 27]: -DSAPSYSTEM=00
-> arg[ 28]: -DSAPSYSTEMNAME=SSM
-> arg[ 29]: -DSAPMYNAME=ptresapsm_SSM_00
-> arg[ 30]: -DSAPDBHOST=PTRESAPSM
-> arg[ 31]: -Dj2ee.dbhost=PTRESAPSM
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
[Thr 2580] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [bootstrap]
-> arg[ 0]: com.sap.engine.bootstrap.Bootstrap
-> arg[ 1]: ./bootstrap
-> arg[ 2]: ID0015832
[Thr 2580] Fri Dec 05 10:56:57 2008
[Thr 2580] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 3872] Fri Dec 05 10:56:59 2008
[Thr 3872] JLaunchIExitJava: exit hook is called (rc = 66)
[Thr 3872] **********************************************************************
*** ERROR => The Java VM terminated with a non-zero exit code.
*** Please see SAP Note 943602 , section 'J2EE Engine exit codes'
*** for additional information and trouble shooting.
[Thr 3872] JLaunchCloseProgram: good bye (exitcode = 66)
trc file: "G:\usr\sap\SSM\DVEBMGS00\work\dev_server0", trc level: 1, release: "700"
node name : ID1583250
pid : 4560
system name : SSM
system nr. : 00
started at : Thu Dec 04 12:15:53 2008
arguments :
arg[00] : G:\usr\sap\SSM\DVEBMGS00\exe\jlaunch.exe
arg[01] : pf=G:\usr\sap\SSM\SYS\profile\SSM_DVEBMGS00_ptresapsm
arg[02] : -DSAPINFO=SSM_00_server
arg[03] : pf=G:\usr\sap\SSM\SYS\profile\SSM_DVEBMGS00_ptresapsm
arg[04] : -DSAPSTART=1
arg[05] : -DCONNECT_PORT=4371
arg[06] : -DSAPSYSTEM=00
arg[07] : -DSAPSYSTEMNAME=SSM
arg[08] : -DSAPMYNAME=ptresapsm_SSM_00
arg[09] : -DSAPPROFILE=G:\usr\sap\SSM\SYS\profile\SSM_DVEBMGS00_ptresapsm
arg[10] : -DFRFC_FALLBACK=ON
arg[11] : -DFRFC_FALLBACK_HOST=localhost
[Thr 4724] Thu Dec 04 12:15:53 2008
[Thr 4724] *** WARNING => INFO: Unknown property [instance.box.number=SSMDVEBMGS00ptresapsm] [jstartxx.c 841]
[Thr 4724] *** WARNING => INFO: Unknown property [instance.en.host=ptresapsm] [jstartxx.c 841]
[Thr 4724] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c 841]
[Thr 4724] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties]
-> ms host : ptresapsm
-> ms port : 3901
-> OS libs : G:\usr\sap\SSM\DVEBMGS00\j2ee\os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
Instance properties
-> ms host : ptresapsm
-> ms port : 3901
-> os libs : G:\usr\sap\SSM\DVEBMGS00\j2ee\os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] bootstrap_ID1583200 : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
-> [02] bootstrap_ID1583250 : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID1583200 : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] ID1583250 : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
[Thr 4724] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 4724] JLaunchRequestQueueInit: create pipe listener thread
[Thr 5880] JLaunchRequestFunc: Thread 5880 started as listener thread for np messages.
[Thr 5300] WaitSyncSemThread: Thread 5300 started as semaphore monitor thread.
[Thr 4724] Thu Dec 04 12:15:54 2008
[Thr 4724] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
[Thr 4724] CPIC (version=700.2006.09.13)
[Thr 4724] [Node: server0] java home is set by profile parameter
Java Home: C:\j2sdkx64
[Thr 4724] JStartupICheckFrameworkPackage: can't find framework package G:\usr\sap\SSM\DVEBMGS00\exe\jvmx.jar
JStartupIReadSection: read node properties [ID1583250]
-> node name : server0
-> node type : server
-> node execute : yes
-> jlaunch parameters :
-> java path : C:\j2sdkx64
-> java parameters : -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -XX:+DisableExplicitGC -verbose:gc -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> java vm version : 1.4.2_17-b06
-> java vm vendor : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : amd64
-> heap size : 1024M
-> init heap size : 1024M
-> root path : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\server0
-> class path : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> OS libs path : G:\usr\sap\SSM\DVEBMGS00\j2ee\os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : G:\usr\sap\SSM\DVEBMGS00\exe\jstartup.jar;G:\usr\sap\SSM\DVEBMGS00\exe\jvmx.jar
-> shutdown class : com.sap.engine.boot.Start
-> parameters :
-> debuggable : no
-> debug mode : no
-> debug port : 50021
-> shutdown timeout : 120000
[Thr 4724] JLaunchISetDebugMode: set debug mode [no]
[Thr 4428] JLaunchIStartFunc: Thread 4428 started as Java VM thread.
[Thr 4428] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
Java Parameters: -Xss2m
JHVM_LoadJavaVM: VM Arguments of node [server0]
-> stack : 1048576 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -Djco.jarm=1
-> arg[ 4]: -XX:MaxPermSize=256M
-> arg[ 5]: -XX:PermSize=256M
-> arg[ 6]: -XX:NewSize=171M
-> arg[ 7]: -XX:MaxNewSize=171M
-> arg[ 8]: -XX:+DisableExplicitGC
-> arg[ 9]: -verbose:gc
-> arg[ 10]: -XX:+PrintGCDetails
-> arg[ 11]: -XX:+PrintGCTimeStamps
-> arg[ 12]: -Djava.awt.headless=true
-> arg[ 13]: -Dsun.io.useCanonCaches=false
-> arg[ 14]: -XX:SoftRefLRUPolicyMSPerMB=1
-> arg[ 15]: -XX:SurvivorRatio=2
-> arg[ 16]: -XX:TargetSurvivorRatio=90
-> arg[ 17]: -Djava.security.policy=./java.policy
-> arg[ 18]: -Djava.security.egd=file:/dev/urandom
-> arg[ 19]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 20]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-> arg[ 21]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> arg[ 22]: -Dsys.global.dir=G:\usr\sap\SSM\SYS\global
-> arg[ 23]: -Dapplication.home=G:\usr\sap\SSM\DVEBMGS00\exe
-> arg[ 24]: -Djava.class.path=G:\usr\sap\SSM\DVEBMGS00\exe\jstartup.jar;G:\usr\sap\SSM\DVEBMGS00\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> arg[ 25]: -Djava.library.path=C:\j2sdkx64\jre\bin\server;C:\j2sdkx64\jre\bin;C:\j2sdkx64\bin;G:\usr\sap\SSM\DVEBMGS00\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdkx64\bin;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;G:\usr\sap\SSM\SYS\exe\uc\NTAMD64
-> arg[ 26]: -Dmemory.manager=1024M
-> arg[ 27]: -Xmx1024M
-> arg[ 28]: -Xms1024M
-> arg[ 29]: -DLoadBalanceRestricted=no
-> arg[ 30]: -Djstartup.mode=JCONTROL
-> arg[ 31]: -Djstartup.ownProcessId=4560
-> arg[ 32]: -Djstartup.ownHardwareId=O0010092564
-> arg[ 33]: -Djstartup.whoami=server
-> arg[ 34]: -Djstartup.debuggable=no
-> arg[ 35]: -Xss2m
-> arg[ 36]: -DSAPINFO=SSM_00_server
-> arg[ 37]: -DSAPSTART=1
-> arg[ 38]: -DCONNECT_PORT=4371
-> arg[ 39]: -DSAPSYSTEM=00
-> arg[ 40]: -DSAPSYSTEMNAME=SSM
-> arg[ 41]: -DSAPMYNAME=ptresapsm_SSM_00
-> arg[ 42]: -DSAPPROFILE=G:\usr\sap\SSM\SYS\profile\SSM_DVEBMGS00_ptresapsm
-> arg[ 43]: -DFRFC_FALLBACK=ON
-> arg[ 44]: -DFRFC_FALLBACK_HOST=localhost
-> arg[ 45]: -DSAPSTARTUP=1
-> arg[ 46]: -DSAPSYSTEM=00
-> arg[ 47]: -DSAPSYSTEMNAME=SSM
-> arg[ 48]: -DSAPMYNAME=ptresapsm_SSM_00
-> arg[ 49]: -DSAPDBHOST=PTRESAPSM
-> arg[ 50]: -Dj2ee.dbhost=PTRESAPSM
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
[Thr 4428] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [server0]
[Thr 588] Thu Dec 04 12:15:57 2008
[Thr 588] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 588] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 588] Thu Dec 04 12:15:58 2008
[Thr 588] JLaunchISetClusterId: set cluster id 1583250
[Thr 588] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 588] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
Thu Dec 04 12:16:13 2008
19.077: [GC 19.077: [DefNew: 87552K->5496K(131328K), 0.0501466 secs] 87552K->5496K(1004800K), 0.0502893 secs]
Thu Dec 04 12:16:18 2008
24.676: [GC 24.677: [DefNew: 93048K->11119K(131328K), 0.1023379 secs] 93048K->11119K(1004800K), 0.1025900 secs]
Thu Dec 04 12:16:22 2008
28.000: [GC 28.001: [DefNew: 98671K->11384K(131328K), 0.0546187 secs] 98671K->11384K(1004800K), 0.0547362 secs]
Thu Dec 04 12:16:24 2008
30.095: [GC 30.096: [DefNew: 98936K->13814K(131328K), 0.0476156 secs] 98936K->13814K(1004800K), 0.0477286 secs]
Thu Dec 04 12:16:25 2008
31.857: [GC 31.857: [DefNew: 101366K->15103K(131328K), 0.0584224 secs] 101366K->15103K(1004800K), 0.0585738 secs]
Thu Dec 04 12:16:28 2008
34.874: [GC 34.874: [DefNew: 102655K->17038K(131328K), 0.0604113 secs] 102655K->17038K(1004800K), 0.0605012 secs]
Thu Dec 04 12:16:32 2008
38.572: [GC 38.572: [DefNew: 104590K->19152K(131328K), 0.0565713 secs] 104590K->19152K(1004800K), 0.0566538 secs]
[Thr 1688] Thu Dec 04 12:16:36 2008
[Thr 1688] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
Thu Dec 04 12:16:37 2008
43.012: [GC 43.012: [DefNew: 106704K->25227K(131328K), 0.0823079 secs] 106704K->25227K(1004800K), 0.0823936 secs]
[Thr 1688] JHVM_RegisterNatives: registering methods in com.sap.i18n.cp.ConverterJNI
[Thr 1688] Thu Dec 04 12:16:38 2008
[Thr 1688] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.engine.Compress
Thu Dec 04 12:16:43 2008
49.556: [GC 49.556: [DefNew: 112779K->29697K(131328K), 0.0999738 secs] 112779K->29697K(1004800K), 0.1000646 secs]
Thu Dec 04 12:16:46 2008
52.042: [GC 52.042: [DefNew: 117249K->35264K(131328K), 0.1106408 secs] 117249K->35264K(1004800K), 0.1107553 secs]
[Thr 5380] Thu Dec 04 12:16:47 2008
[Thr 5380] JHVM_RegisterNatives: registering methods in com.sap.security.core.server.vsi.service.jni.VirusScanInterface
Thu Dec 04 12:16:48 2008
54.071: [GC 54.072: [DefNew: 122816K->40377K(131328K), 0.1233043 secs] 122816K->40377K(1004800K), 0.1234162 secs]
Thu Dec 04 12:16:49 2008
55.087: [GC 55.087: [DefNew: 127929K->37640K(131328K), 0.1115527 secs] 127929K->41526K(1004800K), 0.1116567 secs]
[Thr 588] Thu Dec 04 12:16:50 2008
[Thr 588] JLaunchISetState: change state from [Starting (2)] to [Starting applications (10)]
Thu Dec 04 12:16:51 2008
57.389: [GC 57.389: [DefNew: 125192K->42625K(131328K), 0.1177039 secs] 129078K->46511K(1004800K), 0.1177899 secs]
Thu Dec 04 12:16:54 2008
60.213: [GC 60.213: [DefNew: 130177K->36624K(131328K), 0.1019909 secs] 134063K->44865K(1004800K), 0.1020999 secs]
Thu Dec 04 12:16:56 2008
62.474: [GC 62.474: [DefNew: 124176K->38648K(131328K), 0.1008482 secs] 132417K->46888K(1004800K), 0.1009399 secs]
Thu Dec 04 12:17:00 2008
66.746: [GC 66.746: [DefNew: 126200K->42040K(131328K), 0.1027034 secs] 134440K->50280K(1004800K), 0.1027940 secs]
Thu Dec 04 12:17:13 2008
79.914: [GC 79.914: [DefNew
Thu Dec 04 12:17:14 2008
: 129592K->41760K(131328K), 0.1082566 secs] 137832K->53026K(1004800K), 0.1083554 secs]
Thu Dec 04 12:17:17 2008
83.501: [GC 83.501: [DefNew: 129312K->41403K(131328K), 0.1066359 secs] 140578K->55610K(1004800K), 0.1067443 secs]
Thu Dec 04 12:17:18 2008
84.609: [GC 84.609: [DefNew: 128952K->43776K(131328K), 0.1170661 secs] 143159K->61207K(1004800K), 0.1171621 secs]
Thu Dec 04 12:17:19 2008
85.804: [GC 85.804: [DefNew: 131328K->36934K(131328K), 0.1093640 secs] 148759K->59382K(1004800K), 0.1094988 secs]
Thu Dec 04 12:17:27 2008
93.252: [GC 93.253: [DefNew: 124461K->42704K(131328K), 0.1173445 secs] 146909K->65152K(1004800K), 0.1174320 secs]
Thu Dec 04 12:17:30 2008
96.217: [GC 96.217: [DefNew: 130256K->40910K(131328K), 0.1076070 secs] 152704K->66929K(1004800K), 0.1077113 secs]
Thu Dec 04 12:17:31 2008
### Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.TypeMappingImpl::initializeRelations
Thu Dec 04 12:17:33 2008
99.226: [GC 99.226: [DefNew: 128462K->35273K(131328K), 0.1083766 secs] 154481K->68349K(1004800K), 0.1084756 secs]
### Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.InstanceBuilder::readElement
Thu Dec 04 12:17:36 2008
102.480: [GC 102.480: [DefNew: 122825K->35659K(131328K), 0.0899413 secs] 155901K->68735K(1004800K), 0.0900270 secs]
### Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.GeneratedComplexType::_loadInto
Thu Dec 04 12:17:37 2008
### Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.InstanceBuilder::readSequence
Thu Dec 04 12:17:38 2008
104.392: [GC 104.392: [DefNew: 123211K->37812K(131328K), 0.0939406 secs] 156287K->70888K(1004800K), 0.0940273 secs]
Thu Dec 04 12:17:40 2008
106.588: [GC 106.588: [DefNew: 125364K->40347K(131328K), 0.0999732 secs] 158440K->73423K(1004800K), 0.1000776 secs]
Thu Dec 04 12:17:43 2008
109.430: [GC 109.430: [DefNew: 127899K->37058K(131328K), 0.1094132 secs] 160975K->75618K(1004800K), 0.1094978 secs]
Thu Dec 04 12:17:46 2008
111.972: [GC 111.973: [DefNew: 124610K->39109K(131328K), 0.1022987 secs] 163170K->77670K(1004800K), 0.1024141 secs]
Thu Dec 04 12:17:48 2008
114.920: [GC 114.920: [DefNew
Thu Dec 04 12:17:49 2008
: 126661K->41995K(131328K), 0.1145837 secs] 165222K->80555K(1004800K), 0.1147194 secs]
Thu Dec 04 12:17:51 2008
117.861: [GC 117.861: [DefNew
Thu Dec 04 12:17:52 2008
: 129547K->39474K(131328K), 0.1112544 secs] 168107K->82009K(1004800K), 0.1113396 secs]
Thu Dec 04 12:17:54 2008
120.826: [GC 120.826: [DefNew: 127026K->40925K(131328K), 0.1045812 secs] 169561K->84055K(1004800K), 0.1046915 secs]
Thu Dec 04 12:17:56 2008
122.740: [GC 122.740: [DefNew: 128477K->42193K(131328K), 0.1803097 secs] 171607K->88132K(1004800K), 0.1804721 secs]
Thu Dec 04 12:18:00 2008
125.939: [GC 125.939: [DefNew: 129745K->38462K(131328K), 0.1148672 secs] 175684K->90542K(1004800K), 0.1149527 secs]
Thu Dec 04 12:18:03 2008
128.973: [GC 128.973: [DefNew: 126014K->40200K(131328K), 0.1029183 secs] 178094K->92280K(1004800K), 0.1030087 secs]
Thu Dec 04 12:18:05 2008
131.325: [GC 131.325: [DefNew: 127752K->39192K(131328K), 0.1282047 secs] 179832K->93785K(1004800K), 0.1283172 secs]
Thu Dec 04 12:18:08 2008
133.987: [GC 133.987: [DefNew: 126744K->41235K(131328K), 0.1047548 secs] 181337K->95828K(1004800K), 0.1048436 secs]
Thu Dec 04 12:18:10 2008
136.610: [GC 136.610: [DefNew: 128787K->40864K(131328K), 0.1071581 secs] 183380K->97485K(1004800K), 0.1072430 secs]
Thu Dec 04 12:18:13 2008
139.412: [GC 139.412: [DefNew: 128416K->36293K(131328K), 0.1119034 secs] 185037K->99433K(1004800K), 0.1120108 secs]
Thu Dec 04 12:18:15 2008
141.693: [GC 141.693: [DefNew: 123845K->37761K(131328K), 0.0960635 secs] 186985K->100902K(1004800K), 0.0961513 secs]
[Thr 3164] Thu Dec 04 12:18:18 2008
[Thr 3164] JLaunchISetState: change state from [Starting applications (10)] to [Running (3)]
Thu Dec 04 12:18:57 2008
182.994: [GC 182.994: [DefNew: 125313K->39240K(131328K), 0.0968107 secs] 188454K->102380K(1004800K), 0.0969356 secs]
Thu Dec 04 12:21:49 2008
355.304: [GC 355.304: [DefNew: 126792K->42607K(131328K), 0.1088315 secs] 189932K->105748K(1004800K), 0.1089311 secs]
Thu Dec 04 12:21:50 2008
356.838: [GC 356.838: [DefNew
Thu Dec 04 12:21:51 2008
: 130159K->43776K(131328K), 0.1229288 secs] 193300K->110857K(1004800K), 0.1230164 secs]
Thu Dec 04 12:21:58 2008
364.250: [GC 364.251: [DefNew: 131328K->43775K(131328K), 0.1563593 secs] 198409K->117956K(1004800K), 0.1564564 secs]
Thu Dec 04 13:11:57 2008
3363.074: [GC 3363.074: [DefNew: 131327K->40304K(131328K), 0.1502807 secs] 205508K->120156K(1004800K), 0.1504182 secs]
Thu Dec 04 14:01:58 2008
6363.012: [GC 6363.012: [DefNew: 127856K->40163K(131328K), 0.0958166 secs] 207708K->121393K(1004800K), 0.0959492 secs]
[Thr 5880] Thu Dec 04 14:30:08 2008
[Thr 5880] JLaunchRequestFunc: receive command:17, argument:0 from pid:3568
[Thr 5880] JLaunchIShutdownInvoke: set shutdown interval (stop:1228401008/end:1228401128/TO:120)
[Thr 5880] JLaunchProcessCommand: Invoke VM Shutdown
[Thr 5880] JHVM_FrameworkShutdownDirect: invoke direct shutdown
[Thr 4916] JLaunchISetState: change state from [Running (3)] to [Waiting for stop (4)]
[Thr 4916] JLaunchISetState: change state from [Waiting for stop (4)] to [Stopping (5)]
[Thr 6052] Thu Dec 04 14:30:12 2008
[Thr 6052] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 7 / sock 5616
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => GwIConnect: GwConnect to localhost / sapgw00 failed (rc=NIECONN_REFUSED) [gwxx.c 296]
[Thr 6052] ***LOG S0T=> GwIConnect, GwConnect (-0010) [gwxx.c 297]
[Thr 6052] ***LOG S0R=> GwIConnect, GwConnect () [gwxx.c 299]
[Thr 6052] ***LOG S0S=> GwIConnect, GwConnect (sapgw00) [gwxx.c 301]
[Thr 6052] ***LOG S90=> SAP_CMREGTP3, GwIConnect ( 236) [r3cpic.c 9624]
[Thr 6052]
[Thr 6052] * ERROR partner '127.0.0.1:sapgw00' not reached
[Thr 6052] *
* TIME Thu Dec 04 14:30:12 2008
[Thr 6052] * RELEASE 700
[Thr 6052] * COMPONENT NI (network interface)
[Thr 6052] * VERSION 38
[Thr 6052] * RC -10
[Thr 6052] * MODULE nixxi.cpp
[Thr 6052] * LINE 2823
[Thr 6052] * DETAIL NiPConnect2
[Thr 6052] * SYSTEM CALL connect
[Thr 6052] * ERRNO 10061
[Thr 6052] * ERRNO TEXT WSAECONNREFUSED: Connection refused
[Thr 6052] * COUNTER 1
[Thr 6052] *
[Thr 6052] *****************************************************************************
8057.269: [GC 8057.270: [DefNew
Thu Dec 04 14:30:13 2008
: 127715K->39141K(131328K), 0.0977667 secs] 208945K->122135K(1004800K), 0.0978771 secs]
[Thr 6052] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 5 / sock 6548
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => GwIConnect: GwConnect to localhost / sapgw00 failed (rc=NIECONN_REFUSED) [gwxx.c 296]
[Thr 6052] ***LOG S0T=> GwIConnect, GwConnect (-0010) [gwxx.c 297]
[Thr 6052] ***LOG S0R=> GwIConnect, GwConnect () [gwxx.c 299]
[Thr 6052] ***LOG S0S=> GwIConnect, GwConnect (sapgw00) [gwxx.c 301]
[Thr 6052] ***LOG S90=> SAP_CMREGTP3, GwIConnect ( 236) [r3cpic.c 9624]
[Thr 6052]
[Thr 6052] * ERROR partner '127.0.0.1:sapgw00' not reached
[Thr 6052] *
* TIME Thu Dec 04 14:30:13 2008
[Thr 6052] * RELEASE 700
[Thr 6052] * COMPONENT NI (network interface)
[Thr 6052] * VERSION 38
[Thr 6052] * RC -10
[Thr 6052] * MODULE nixxi.cpp
[Thr 6052] * LINE 2823
[Thr 6052] * DETAIL NiPConnect2
[Thr 6052] * SYSTEM CALL connect
[Thr 6052] * ERRNO 10061
[Thr 6052] * ERRNO TEXT WSAECONNREFUSED: Connection refused
[Thr 6052] * COUNTER 2
[Thr 6052] *
[Thr 6052] *****************************************************************************
[Thr 6052] Thu Dec 04 14:30:14 2008
[Thr 6052] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 5 / sock 6548
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => GwIConnect: GwConnect to localhost / sapgw00 failed (rc=NIECONN_REFUSED) [gwxx.c 296]
[Thr 6052] ***LOG S0T=> GwIConnect, GwConnect (-0010) [gwxx.c 297]
[Thr 6052] ***LOG S0R=> GwIConnect, GwConnect () [gwxx.c 299]
[Thr 6052] ***LOG S0S=> GwIConnect, GwConnect (sapgw00) [gwxx.c 301]
[Thr 6052] ***LOG S90=> SAP_CMREGTP3, GwIConnect ( 236) [r3cpic.c 9624]
[Thr 6052]
[Thr 6052] * ERROR partner '127.0.0.1:sapgw00' not reached
[Thr 6052] *
* TIME Thu Dec 04 14:30:14 2008
[Thr 6052] * RELEASE 700
[Thr 6052] * COMPONENT NI (network interface)
[Thr 6052] * VERSION 38
[Thr 6052] * RC -10
[Thr 6052] * MODULE nixxi.cpp
[Thr 6052] * LINE 2823
[Thr 6052] * DETAIL NiPConnect2
[Thr 6052] * SYSTEM CALL connect
[Thr 6052] * ERRNO 10061
[Thr 6052] * ERRNO TEXT WSAECONNREFUSED: Connection refused
[Thr 6052] * COUNTER 3
[Thr 6052] *
[Thr 6052] *****************************************************************************
[Thr 6052] Thu Dec 04 14:30:15 2008
[Thr 6052] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 6 / sock 5620
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => GwIConnect: GwConnect to localhost / sapgw00 failed (rc=NIECONN_REFUSED) [gwxx.c 296]
[Thr 6052] ***LOG S0T=> GwIConnect, GwConnect (-0010) [gwxx.c 297]
[Thr 6052] ***LOG S0R=> GwIConnect, GwConnect () [gwxx.c 299]
[Thr 6052] ***LOG S0S=> GwIConnect, GwConnect (sapgw00) [gwxx.c 301]
[Thr 6052] ***LOG S90=> SAP_CMREGTP3, GwIConnect ( 236) [r3cpic.c 9624]
[Thr 6052]
[Thr 6052] * ERROR partner '127.0.0.1:sapgw00' not reached
[Thr 6052] *
* TIME Thu Dec 04 14:30:15 2008
[Thr 6052] * RELEASE 700
[Thr 6052] * COMPONENT NI (network interface)
[Thr 6052] * VERSION 38
[Thr 6052] * RC -10
[Thr 6052] * MODULE nixxi.cpp
[Thr 6052] * LINE 2823
[Thr 6052] * DETAIL NiPConnect2
[Thr 6052] * SYSTEM CALL connect
[Thr 6052] * ERRNO 10061
[Thr 6052] * ERRNO TEXT WSAECONNREFUSED: Connection refused
[Thr 6052] * COUNTER 4
[Thr 6052] *
[Thr 6052] *****************************************************************************
[Thr 6052] Thu Dec 04 14:30:16 2008
[Thr 6052] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 6 / sock 5620
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => GwIConnect: GwConnect to localhost / sapgw00 failed (rc=NIECONN_REFUSED) [gwxx.c 296]
[Thr 6052] ***LOG S0T=> GwIConnect, GwConnect (-0010) [gwxx.c 297]
[Thr 6052] ***LOG S0R=> GwIConnect, GwConnect () [gwxx.c 299]
[Thr 6052] ***LOG S0S=> GwIConnect, GwConnect (sapgw00) [gwxx.c 301]
[Thr 6052] ***LOG S90=> SAP_CMREGTP3, GwIConnect ( 236) [r3cpic.c 9624]
[Thr 6052]
[Thr 6052] * ERROR partner '127.0.0.1:sapgw00' not reached
[Thr 6052] *
* TIME Thu Dec 04 14:30:16 2008
[Thr 6052] * RELEASE 700
[Thr 6052] * COMPONENT NI (network interface)
[Thr 6052] * VERSION 38
[Thr 6052] * RC -10
[Thr 6052] * MODULE nixxi.cpp
[Thr 6052] * LINE 2823
[Thr 6052] * DETAIL NiPConnect2
[Thr 6052] * SYSTEM CALL connect
[Thr 6052] * ERRNO 10061
[Thr 6052] * ERRNO TEXT WSAECONNREFUSED: Connection refused
[Thr 6052] * COUNTER 5
[Thr 6052] *
[Thr 6052] *****************************************************************************
[Thr 6052] Thu Dec 04 14:30:19 2008
[Thr 6052] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 4 / sock 6000
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => GwIConnect: GwConnect to localhost / sapgw00 failed (rc=NIECONN_REFUSED) [gwxx.c 296]
[Thr 6052] ***LOG S0T=> GwIConnect, GwConnect (-0010) [gwxx.c 297]
[Thr 6052] ***LOG S0R=> GwIConnect, GwConnect () [gwxx.c 299]
[Thr 6052] ***LOG S0S=> GwIConnect, GwConnect (sapgw00) [gwxx.c 301]
[Thr 6052] ***LOG S90=> SAP_CMREGTP3, GwIConnect ( 236) [r3cpic.c 9624]
[Thr 6052]
[Thr 6052] * ERROR partner '127.0.0.1:sapgw00' not reached
[Thr 6052] *
* TIME Thu Dec 04 14:30:19 2008
[Thr 6052] * RELEASE 700
[Thr 6052] * COMPONENT NI (network interface)
[Thr 6052] * VERSION 38
[Thr 6052] * RC -10
[Thr 6052] * MODULE nixxi.cpp
[Thr 6052] * LINE 2823
[Thr 6052] * DETAIL NiPConnect2
[Thr 6052] * SYSTEM CALL connect
[Thr 6052] * ERRNO 10061
[Thr 6052] * ERRNO TEXT WSAECONNREFUSED: Connection refused
[Thr 6052] * COUNTER 6
[Thr 6052] *
[Thr 6052] *****************************************************************************
[Thr 6052] Thu Dec 04 14:30:22 2008
[Thr 6052] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 4 / sock 2992
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => GwIConnect: GwConnect to localhost / sapgw00 failed (rc=NIECONN_REFUSED) [gwxx.c 296]
[Thr 6052] ***LOG S0T=> GwIConnect, GwConnect (-0010) [gwxx.c 297]
[Thr 6052] ***LOG S0R=> GwIConnect, GwConnect () [gwxx.c 299]
[Thr 6052] ***LOG S0S=> GwIConnect, GwConnect (sapgw00) [gwxx.c 301]
[Thr 6052] ***LOG S90=> SAP_CMREGTP3, GwIConnect ( 236) [r3cpic.c 9624]
[Thr 6052]
[Thr 6052] * ERROR partner '127.0.0.1:sapgw00' not reached
[Thr 6052] *
* TIME Thu Dec 04 14:30:22 2008
[Thr 6052] * RELEASE 700
[Thr 6052] * COMPONENT NI (network interface)
[Thr 6052] * VERSION 38
[Thr 6052] * RC -10
[Thr 6052] * MODULE nixxi.cpp
[Thr 6052] * LINE 2823
[Thr 6052] * DETAIL NiPConnect2
[Thr 6052] * SYSTEM CALL connect
[Thr 6052] * ERRNO 10061
[Thr 6052] * ERRNO TEXT WSAECONNREFUSED: Connection refused
[Thr 6052] * COUNTER 7
[Thr 6052] *
[Thr 6052] *****************************************************************************
[Thr 6052] Thu Dec 04 14:30:25 2008
[Thr 6052] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 4 / sock 2992
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => GwIConnect: GwConnect to localhost / sapgw00 failed (rc=NIECONN_REFUSED) [gwxx.c 296]
[Thr 6052] ***LOG S0T=> GwIConnect, GwConnect (-0010) [gwxx.c 297]
[Thr 6052] ***LOG S0R=> GwIConnect, GwConnect () [gwxx.c 299]
[Thr 6052] ***LOG S0S=> GwIConnect, GwConnect (sapgw00) [gwxx.c 301]
[Thr 6052] ***LOG S90=> SAP_CMREGTP3, GwIConnect ( 236) [r3cpic.c 9624]
[Thr 6052]
[Thr 6052] * ERROR partner '127.0.0.1:sapgw00' not reached
[Thr 6052] *
* TIME Thu Dec 04 14:30:25 2008
[Thr 6052] * RELEASE 700
[Thr 6052] * COMPONENT NI (network interface)
[Thr 6052] * VERSION 38
[Thr 6052] * RC -10
[Thr 6052] * MODULE nixxi.cpp
[Thr 6052] * LINE 2823
[Thr 6052] * DETAIL NiPConnect2
[Thr 6052] * SYSTEM CALL connect
[Thr 6052] * ERRNO 10061
[Thr 6052] * ERRNO TEXT WSAECONNREFUSED: Connection refused
[Thr 6052] * COUNTER 8
[Thr 6052] *
[Thr 6052] *****************************************************************************
[Thr 6052] Thu Dec 04 14:30:32 2008
[Thr 6052] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 4 / sock 2988
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => GwIConnect: GwConnect to localhost / sapgw00 failed (rc=NIECONN_REFUSED) [gwxx.c 296]
[Thr 6052] ***LOG S0T=> GwIConnect, GwConnect (-0010) [gwxx.c 297]
[Thr 6052] ***LOG S0R=> GwIConnect, GwConnect () [gwxx.c 299]
[Thr 6052] ***LOG S0S=> GwIConnect, GwConnect (sapgw00) [gwxx.c 301]
[Thr 6052] ***LOG S90=> SAP_CMREGTP3, GwIConnect ( 236) [r3cpic.c 9624]
[Thr 6052]
[Thr 6052] * ERROR partner '127.0.0.1:sapgw00' not reached
[Thr 6052] *
* TIME Thu Dec 04 14:30:32 2008
[Thr 6052] * RELEASE 700
[Thr 6052] * COMPONENT NI (network interface)
[Thr 6052] * VERSION 38
[Thr 6052] * RC -10
[Thr 6052] * MODULE nixxi.cpp
[Thr 6052] * LINE 2823
[Thr 6052] * DETAIL NiPConnect2
[Thr 6052] * SYSTEM CALL connect
[Thr 6052] * ERRNO 10061
[Thr 6052] * ERRNO TEXT WSAECONNREFUSED: Connection refused
[Thr 6052] * COUNTER 9
[Thr 6052] *
[Thr 6052] *****************************************************************************
Thu Dec 04 14:30:34 2008
8078.843: [GC 8078.843: [DefNew: 126693K->35646K(131328K), 0.0929205 secs] 209687K->118640K(1004800K), 0.0931376 secs]
[Thr 280] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.sadm.ShmCache
[Thr 6052] Thu Dec 04 14:30:35 2008
[Thr 6052] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 4 / sock 8804
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => GwIConnect: GwConnect to localhost / sapgw00 failed (rc=NIECONN_REFUSED) [gwxx.c 296]
[Thr 6052] ***LOG S0T=> GwIConnect, GwConnect (-0010) [gwxx.c 297]
[Thr 6052] ***LOG S0R=> GwIConnect, GwConnect () [gwxx.c 299]
[Thr 6052] ***LOG S0S=> GwIConnect, GwConnect (sapgw00) [gwxx.c 301]
[Thr 6052] ***LOG S90=> SAP_CMREGTP3, GwIConnect ( 236) [r3cpic.c 9624]
[Thr 6052]
[Thr 6052] * ERROR partner '127.0.0.1:sapgw00' not reached
[Thr 6052] *
* TIME Thu Dec 04 14:30:35 2008
[Thr 6052] * RELEASE 700
[Thr 6052] * COMPONENT NI (network interface)
[Thr 6052] * VERSION 38
[Thr 6052] * RC -10
[Thr 6052] * MODULE nixxi.cpp
[Thr 6052] * LINE 2823
[Thr 6052] * DETAIL NiPConnect2
[Thr 6052] * SYSTEM CALL connect
[Thr 6052] * ERRNO 10061
[Thr 6052] * ERRNO TEXT WSAECONNREFUSED: Connection refused
[Thr 6052] * COUNTER 10
[Thr 6052] *
[Thr 6052] *****************************************************************************
[Thr 4916] Thu Dec 04 14:30:36 2008
[Thr 4916] JLaunchISetState: change state from [Stopping (5)] to [Stopped (6)]
[Thr 1188] Thu Dec 04 14:30:37 2008
[Thr 1188] JLaunchIExitJava: exit hook is called (rc = 0)
[Thr 1188] JLaunchCloseProgram: good bye (exitcode = 0)
stdout/stderr redirect
node name : server0
pid : 3568
system name : SSM
system nr. : 00
started at : Thu Dec 04 12:15:53 2008
[Thr 4724] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
SAP J2EE Engine Version 7.00 PatchLevel 109886.44 is starting...
Loading: LogManager ... 1235 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 188 ms.
Loading: ThreadManager ... 47 ms.
Loading: IpVerificationManager ... 15 ms.
Loading: ClassLoaderManager ... 32 ms.
Loading: ClusterManager ... 437 ms.
Loading: LockingManager ... 109 ms.
Loading: ConfigurationManager ... 3750 ms.
Loading: LicensingManager ... 63 ms.
Loading: CacheManager ... 281 ms.
Loading: ServiceManager ...
19.077: [GC 19.077: [DefNew: 87552K->5496K(131328K), 0.0501466 secs] 87552K->5496K(1004800K), 0.0502893 secs]
Loading services.:
Service cross started. (94 ms).
Service file started. (109 ms).
Service memory started. (47 ms).
Service timeout started. (125 ms).
Service runtimeinfo started. (141 ms).
Service trex.service started. (62 ms).
Service p4 started. (516 ms).
Service classpath_resolver started. (47 ms).
Service userstore started. (63 ms).
Service jmx_notification started. (63 ms).
24.676: [GC 24.677: [DefNew: 93048K->11119K(131328K), 0.1023379 secs] 93048K->11119K(1004800K), 0.1025900 secs]
28.000: [GC 28.001: [DefNew: 98671K->11384K(131328K), 0.0546187 secs] 98671K->11384K(1004800K), 0.0547362 secs]
30.095: [GC 30.096: [DefNew: 98936K->13814K(131328K), 0.0476156 secs] 98936K->13814K(1004800K), 0.0477286 secs]
31.857: [GC 31.857: [DefNew: 101366K->15103K(131328K), 0.0584224 secs] 101366K->15103K(1004800K), 0.0585738 secs]
Service log_configurator started. (9922 ms).
Service locking started. (16 ms).
Service naming started. (547 ms).
Service ts started. (110 ms).
Service licensing started. (63 ms).
Service failover started. (156 ms).
Service javamail started. (250 ms).
Service http started. (672 ms).
Service appclient started. (187 ms).
Service jmsconnector started. (266 ms).
Service connector started. (313 ms).
Service iiop started. (375 ms).
Service webservices started. (1063 ms).
34.874: [GC 34.874: [DefNew: 102655K->17038K(131328K), 0.0604113 secs] 102655K->17038K(1004800K), 0.0605012 secs]
38.572: [GC 38.572: [DefNew: 104590K->19152K(131328K), 0.0565713 secs] 104590K->19152K(1004800K), 0.0566538 secs]
Service deploy started. (16954 ms).
Service configuration started. (63 ms).
Service MigrationService started. (47 ms).
Service bi~mmr~deployer started. (15 ms).
Service dbpool started. (1641 ms).
Service UT started. (16 ms).
43.012: [GC 43.012: [DefNew: 106704K->25227K(131328K), 0.0823079 secs] 106704K->25227K(1004800K), 0.0823936 secs]
Service com.sap.security.core.ume.service started. (5985 ms).
Service security started. (1313 ms).
49.556: [GC 49.556: [DefNew: 112779K->29697K(131328K), 0.0999738 secs] 112779K->29697K(1004800K), 0.1000646 secs]
Service classload started. (187 ms).
Service applocking started. (203 ms).
Service shell started. (250 ms).
Service tc~eCATTPing~service started. (62 ms).
Service telnet started. (62 ms).
Service ejb started. (547 ms).
Service dsr started. (281 ms).
Service servlet_jsp started. (969 ms).
Service webdynpro started. (672 ms).
Service tc~di~sdic~srv started. (2359 ms).
Service keystore started. (1094 ms).
Service ssl started. (31 ms).
Service tc~sec~securestorage~service started. (219 ms).
Service tc~sec~certrevoc~service started. (187 ms).
Service caf~um~metadata~imp started. (1344 ms).
Service jmx started. (1031 ms).
Service caf~runtime~connectivity~impl started. (26938 ms).
52.042: [GC 52.042: [DefNew: 117249K->35264K(131328K), 0.1106408 secs] 117249K->35264K(1004800K), 0.1107553 secs]
Service tc~lm~ctc~confs~service_sda started. (891 ms).
Service CUL started. (1125 ms).
Service tc~sec~destinations~service started. (1266 ms).
Service tc~sec~wssec~service started. (1250 ms).
Service caf~um~relgroups~imp started. (1312 ms).
Service sld started. (1625 ms).
Service rfcengine started. (328 ms).
Service com.adobe~DocumentServicesBinaries2 started. (1313 ms).
Service com.adobe~DocumentServicesLicenseSupportService started. (828 ms).
Service com.adobe~DataManagerService started. (1219 ms).
Service com.adobe~DocumentServicesDestProtoService started. (390 ms).
Service com.adobe~XMLFormService started. (953 ms).
Service tc~sec~vsi~service started. (734 ms).
Service basicadmin started. (2157 ms).
Service apptracing started. (735 ms).
Service com.adobe~LicenseService started. (171 ms).
Service pmi started. (109 ms).
54.071: [GC 54.072: [DefNew: 122816K->40377K(131328K), 0.1233043 secs] 122816K->40377K(1004800K), 0.1234162 secs]
Service adminadapter started. (750 ms).
Service com.adobe~PDFManipulation started. (2078 ms).
Service tc~smd~server~service started. (1485 ms).
Service com.adobe~DocumentServicesConfiguration started. (1031 ms).
Service com.adobe~TrustManagerService started. (109 ms).
Service monitor started. (829 ms).
55.087: [GC 55.087: [DefNew: 127929K->37640K(131328K), 0.1115527 secs] 127929K->41526K(1004800K), 0.1116567 secs]
Service jms_provider started. (4219 ms).
Service tc.monitoring.logviewer started. (4000 ms).
Service com.adobe~FontManagerService started. (4593 ms).
ServiceManager started for 47938 ms.
Framework started for 54563 ms.
SAP J2EE Engine Version 7.00 PatchLevel 109886.44 is running!
PatchLevel 109886.44 November 17, 2007 10:27 GMT
>
Login :57.389: [GC 57.389: [DefNew: 125192K->42625K(131328K), 0.1177039 secs] 129078K->46511K(1004800K), 0.1177899 secs]
60.213: [GC 60.213: [DefNew: 130177K->36624K(131328K), 0.1019909 secs] 134063K->44865K(1004800K), 0.1020999 secs]
62.474: [GC 62.474: [DefNew: 124176K->38648K(131328K), 0.1008482 secs] 132417K->46888K(1004800K), 0.1009399 secs]
66.746: [GC 66.746: [DefNew: 126200K->42040K(131328K), 0.1027034 secs] 134440K->50280K(1004800K), 0.1027940 secs]
79.914: [GC 79.914: [DefNew: 129592K->41760K(131328K), 0.1082566 secs] 137832K->53026K(1004800K), 0.1083554 secs]
83.501: [GC 83.501: [DefNew: 129312K->41403K(131328K), 0.1066359 secs] 140578K->55610K(1004800K), 0.1067443 secs]
84.609: [GC 84.609: [DefNew: 128952K->43776K(131328K), 0.1170661 secs] 143159K->61207K(1004800K), 0.1171621 secs]
85.804: [GC 85.804: [DefNew: 131328K->36934K(131328K), 0.1093640 secs] 148759K->59382K(1004800K), 0.1094988 secs]
93.252: [GC 93.253: [DefNew: 124461K->42704K(131328K), 0.1173445 secs] 146909K->65152K(1004800K), 0.1174320 secs]
96.217: [GC 96.217: [DefNew: 130256K->40910K(131328K), 0.1076070 secs] 152704K->66929K(1004800K), 0.1077113 secs]
### Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.TypeMappingImpl::initializeRelations
99.226: [GC 99.226: [DefNew: 128462K->35273K(131328K), 0.1083766 secs] 154481K->68349K(1004800K), 0.1084756 secs]
### Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.InstanceBuilder::readElement
102.480: [GC 102.480: [DefNew: 122825K->35659K(131328K), 0.0899413 secs] 155901K->68735K(1004800K), 0.0900270 secs]
### Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.GeneratedComplexType::_loadInto
### Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.InstanceBuilder::readSequence
104.392: [GC 104.392: [DefNew: 123211K->37812K(131328K), 0.0939406 secs] 156287K->70888K(1004800K), 0.0940273 secs]
106.588: [GC 106.588: [DefNew: 125364K->40347K(131328K), 0.0999732 secs] 158440K->73423K(1004800K), 0.1000776 secs]
109.430: [GC 109.430: [DefNew: 127899K->37058K(131328K), 0.1094132 secs] 160975K->75618K(1004800K), 0.1094978 secs]
111.972: [GC 111.973: [DefNew: 124610K->39109K(131328K), 0.1022987 secs] 163170K->77670K(1004800K), 0.1024141 secs]
114.920: [GC 114.920: [DefNew: 126661K-& -
Disp+work.EXE has encountered a problem and needs to close ...
Hi all
I've installed NW 7.02 ABAP trial on a VM running with XP Pro english version, SP3.
Via SICF also all services have been activated.
When calling SE80 -> Web Dynpro -> (e.g.) WDR_TEST_MISC (or any other WD apllication) -> opening: Component Interface -> double click on INTERFACECONTROLLER -> selecting: CONTEXT -> and then select the 'Properties' tab ==>> the following ERROR occurs:
=> disp+work.EXE has encountered a problem and needs to close ... (seems to me to be a MicroSoft popup)
After closing this popup, another one appears, telling me: 'SAP GUI for Windows 720 - NSP: Sap Systemnachricht; Work process restarted; session terminated'.
That's the end of this session :-((
This error occurs only when I try to call the properties of the Interface context!
Regards, StefanHi Stefan,
I had this problem yesterday while using SGEN after a fresh install of NW 7.02 (64 bit).
I forgot to switch of the DB Log and it ran full (I think in earlier versions of the preview installtion MaxDB Log was set to overwrite mode by default which isn't the case with this installation). Anyway, the log ran full, disp+work died and after that it was imposible to restart the system because the dispatcher died shortly after it had started.
Maybe you check your DB with the database manager.
Good Luck
Markus -
Hello gurus,
System: Solution Manager
OS: Windows 2003 server R2 X32
DB: Microsoft SQL server 2005
I have an error when I tried to start my solution manager system, after having done a kernel upgrade (for the level 201)
I donu00B4t know why but the error (as you see in following image) itu00B4s in the java stack more particularly in disp+work.EXE Dispatcher with the status "Running, Message Server connection ok, Dialog Queue time: 0.00 sec, J2EE status info unavailable".
http://img6.imageshack.us/img6/7067/solmanj2eeerror.png
Can you help me whatu00B4s the problem here?
This next text itu00B4s a dev_disp log... maybe with this you get the error and the solution for that! :
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid PSM
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 201
intno 20050900
make: multithreaded, ASCII, optimized
pid 756
Sun Jul 05 21:08:44 2009
kernel runs with dp version 242(ext=110) (@(#) DPLIB-INT-VERSION-242)
length of sys_adm_ext is 364 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 756) [dpxxdisp.c 1287]
shared lib "dw_xml.dll" version 201 successfully loaded
shared lib "dw_xtc.dll" version 201 successfully loaded
shared lib "dw_stl.dll" version 201 successfully loaded
shared lib "dw_gui.dll" version 201 successfully loaded
shared lib "dw_mdm.dll" version 201 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Sun Jul 05 21:08:49 2009
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5518]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >salzburgo_PSM_01 <
DpShMCreate: sizeof(wp_adm) 16464 (1176)
DpShMCreate: sizeof(tm_adm) 3786880 (18840)
DpShMCreate: sizeof(wp_ca_adm) 18048 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1296)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 055C0040, size: 4419544)
DpShMCreate: allocated sys_adm at 055C0040
DpShMCreate: allocated wp_adm at 055C1BF8
DpShMCreate: allocated tm_adm_list at 055C5C48
DpShMCreate: allocated tm_adm at 055C5C78
DpShMCreate: allocated wp_ca_adm at 059624F8
DpShMCreate: allocated appc_ca_adm at 05966B78
DpShMCreate: allocated comm_adm at 059682E8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 059E9198
DpShMCreate: allocated gw_adm at 059E91D8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 059E9208
DpShMCreate: allocated wall_adm at 059E9210
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
J2EE server info
start = TRUE
state = STARTED
pid = 5700
argv[0] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=PSM
argv[7] = -DSAPMYNAME=salzburgo_PSM_01
argv[8] = -DSAPPROFILE=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( salzburgo) [dpxxdisp.c 12527]
DpStartStopMsg: send start message (myname is >salzburgo_PSM_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 201
Release check o.K.
Sun Jul 05 21:08:55 2009
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Sun Jul 05 21:08:57 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1444
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2040) [nixxi.cpp 4424]
*** ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Sun Jul 05 21:09:29 2009
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Sun Jul 05 21:09:49 2009
J2EE server info
start = TRUE
state = STARTED
pid = 2168
argv[0] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64999
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=PSM
argv[7] = -DSAPMYNAME=salzburgo_PSM_01
argv[8] = -DSAPPROFILE=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun Jul 05 21:09:52 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1440
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2126) [nixxi.cpp 4424]
*** ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Sun Jul 05 21:10:09 2009
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Sun Jul 05 21:10:29 2009
J2EE server info
start = TRUE
state = STARTED
pid = 5484
argv[0] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64997
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=PSM
argv[7] = -DSAPMYNAME=salzburgo_PSM_01
argv[8] = -DSAPPROFILE=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun Jul 05 21:10:32 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1532
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2133) [nixxi.cpp 4424]
*** ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Sun Jul 05 21:10:49 2009
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Sun Jul 05 21:11:09 2009
J2EE server info
start = TRUE
state = STARTED
pid = 3348
argv[0] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64996
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=PSM
argv[7] = -DSAPMYNAME=salzburgo_PSM_01
argv[8] = -DSAPPROFILE=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun Jul 05 21:11:12 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1436
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2144) [nixxi.cpp 4424]
*** ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Sun Jul 05 21:11:29 2009
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Sun Jul 05 21:11:49 2009
J2EE server info
start = TRUE
state = STARTED
pid = 1868
argv[0] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64995
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=PSM
argv[7] = -DSAPMYNAME=salzburgo_PSM_01
argv[8] = -DSAPPROFILE=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun Jul 05 21:11:52 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1444
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2152) [nixxi.cpp 4424]
*** ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Sun Jul 05 21:12:09 2009
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Sun Jul 05 21:12:29 2009
DpEnvCheckJ2ee: switch off j2ee start flag
Best regards,
Jou00E3o Dimas - Portugal
Edited by: Jou00E3o Dimas on Jul 5, 2009 11:39 PMHi uday kumar,
First thank you to tried to help me!
--> So... I have a problem... in that checked that you asked, I donu00B4t have acess to all clients in system... Iu00B4m only able to login to client 000 and 100 and in that clients that two users SAPJSF and J2ee_admin donu00B4t exist!! But maybe in 001... I donu00B4t know!! Itu00B4s any other way to know that? I think through configtool in j2ee directory... but I donu00B4t get that, maybe because I donu00B4t have the JAVA part active!!
--> And other thing, you recommed me to "Check the profile parameters once, try change the JVM setting and check were you able to start the server"... What you want to say with JVM setting.. sorry Iu00B4m still newest in sap world... can you explain me better what you wanted to say..?! Thanks.
--> Other think and the last... I checked the sapstartsrv.log in D:\usr\sap\PSM\SCS00\work directory path and in that it said this:
trc file: "sapstartsrv.log", trc level: 0, release: "700"
Mon Mar 09 11:13:46 2009
<<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_LIB_NOT_FOUND
Can you help me?!... thanks a lot!
Best regards,
Jou00E3o Dimas - Portugal
Maybe you are looking for
-
Power button not working Yoga 11s
My yoga 11s went into sleep mode while plugged in sitting on my desk yesterday now the power button is not working. The light of the power button and the battery are on, but the screen will not turn on.
-
External display physical arrangement setting reset each time?
Hi, When I connect my Dell 2407WFPb 24" LCD display to my 15" MacBook Pro running Vista Business SP2 under Bootcamp using the DVI adapter and I set the physical arrangement of the display using the Windows Display Setting control panel, when I discon
-
Java.lang.NoClassDefFoundError in Java Web Service Pack
I downloaded a Java WSDP 1.0.01 together with the tutorial. When I tried to compile a simple program using the SAX package, it said it couldn't resolve such names as SAXParserFactory, etc. Then I moved all the .jar files to the JRE/lib/ext directory
-
ITunes 11.x resetting itself every time its closed and relaunched
Itunes 11.x keeps resetting itself every time I close it and then later reopen. It prompts accepting the end user agreement, then upon entering, all the sync preferences are reset. Doesn't seem to effect backup of apps or music library. I'm using win
-
How do I get my apps to stop saying waiting
How do I get my apps to stop saying waiting