Error message 'No entry in the table T589A for P 2'

Hi all,
I am updating the field of an infotype using the function module 'HR_INFOTYPE_OPERATION'. But the function module is not updating the field. Instead the return key of the function module has the message
'No entry in the table T589A for P2'. The function module is called as follows:
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
    infty                  = '9900'
    number                 = wf_pernr
    SUBTYPE                = P9900-SUBTY
OBJECTID               =
LOCKINDICATOR          =
    VALIDITYEND            = P9900-ENDDA
    VALIDITYBEGIN          = P9900-BEGDA
RECORDNUMBER           =
    record                 = p9900
    operation              = 'MOD'
TCLAS                  = 'A'
   DIALOG_MODE            = '0'
   NOCOMMIT               =
VIEW_IDENTIFIER        =
SECONDARY_RECORD       =
IMPORTING
   RETURN                 = wf_return
   KEY                    = wf_key
Please suggest.
regrds,
madhu

Hi,
The table T589A is a configuration table pertaining to the pf status of the infotype. I changed the pf status of the infotype i.e. added my own buttons on application tool bar. May be cos of that it is giving error. Not sure.......

Similar Messages

"No entry in the table T589A for P" in PPOME's custom Tab

Hello,
requisites: Add one custom Tab to transaction PPOME relative to Position (Object type S)
problem:"No entry in the table T589A for P" when entering the transaction PPOME, and choose my new added Tab.
I get this error message "No entry in the table T589A for P" when entering the transaction PPOME, and choose my new added Tab.
The thing is, if I comment the line "MODULE BEFORE_OUTPUT" in subscreen 7000 of the infotype (the tab is infotype specific) this error disappear. But then the data entered in the tab, which should be relative to one position (type S), is now displayed for all positions. When leaving the transaction, and entering again, in the same tab, the data has disappeared.
I think I should not comment this: "MODULE BEFORE_OUTPUT"
Why is this error being raised, and what must I do do stop it?
Thank you.

Hi,
The table T589A is a configuration table pertaining to the pf status of the infotype. I changed the pf status of the infotype i.e. added my own buttons on application tool bar. May be cos of that it is giving error. Not sure.......

PDF SCANS ERROR MESSAGE: CAN'T "OPEN THE DEFAULT APP FOR THIS FILE TYPE" EG. PDF

OFFICEJET PRO 8600 PLUS , WIN 7, SCAN TO COMPUTER AS A PDF FILE. ERROR MESSAGE: "
CAN'T "OPEN THE DEFAULT APP FOR THIS FILE TYPE" EG. PDF

Hi @reddog2,
I would contact HP Cloud Services for assistance. Call 1-855-785-2777.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

AA - Error Message: No data found in table j_1aat089 for depreciation area

Hi friends,
I am trying to execute ABAW transaction but I recieved the below error:
"No data found in table j_1aat089 for depreciation area 00."
Message no. 8Z874
But Area 00 there is not configurate in my system.
Does anyone has any hint regarding this issue?
Thanks
Daniel Dorta

Hi Daniel,
You are not using Inflation funcitonality, are not you? Check that in IMG - Financial Accounting (New) - Financial Accounting Global Settings (New) - Inflation Accounting - Inflation Methods - Assign Inflation Methods to Company Codes your company code is not assigned to any inflation methods.
Regards,
Eli

No entry in the table T528B for S 50001819

Hi Guys,
I have created all the positions using PPOME & now trying to hire people under PA40, but it gives above error.
What could be the problem?
Thanks
Deepali

Is this the first time you're hiring an employee after you've created the positions?
Or have there been an upgrade in the system?
Please make sure that the following entries are there in T77S0 table:
PLOGI PLOGI 01
PLOGI ORGA X
Activate PLOGI feature via PE03.
run all the RHINTEXX reports.
Please also make sure that positions are in active status before assigning them to employees.
Change status PO13 - Edit Status change - Activate --> If needed.
Check the plan versions too.
Dilek
Edited by: Dilek Ersoz Adak on Dec 28, 2009 1:37 PM

I get an error message trying to load the help site for Photoshop CC

Pressing F1 or selecting 'help' in Photoshop CC produces an error message in Firefox ('you do not have permission' etc) but works fine in Internet Explorer. I tried reinstalling Photoshop CC, and I tried reinstalling Firefox but the problem persisted (I admit I did not clear my Firefox settings before reinstalling). Adobe say it is a Firefox problem. As far as I am aware I have no other Firefox problems. Running in Windows 7 64-bit, everything up to date.

https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can
https://support.mozilla.org/en-US/kb/secure-connection-failed-error-message
https://support.mozilla.org/en-US/kb/connection-untrusted-error-message
'''http://kb.mozillazine.org/Error_loading_websites'''
'''This Connection is Untrusted''' is sometimes caused because the
computer system clock is wrong. Check the time / date / time zone settings.

Error message: "Unable to prepare the selected file for editing"

There is another similar post. I have imported a bunch of Nikon NEF raw files into Lightroom. I can work them without any problem, but when I right-click the image to edit it further in Photoshop CS3. I get this message: i "Lightroom was unable to prepare the selected file <filename.NEF> for editing. It will not be opened." Photoshop has no trouble opening these NEF files by itself, but Lightroom can't hand it them off. Anyone know why this is? Nothing I can find in the help file or elsewhere here. Stan

Sean, if they are off-line, would any of this Xmp stuff make any difference? Don't they need to be brought On-lie to edit? And where would the Xmp's go with them off-line?
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core, Pentax *ist D
http://donricklin.blogspot.com/

Error "No entry in table T589A for P" while creating new Infotype

HI,
I've created a new infotype (9605). All the tables, structures, screens etc. have been created using transaction PM01 successfully. But upon execution of Infotype from PA30, the infotype screen is displayed with the following error:
"No entry in table T589A for P"
Any input will be highly appreciated.
Thank you,
Farooq.

Hi Farooq,
Untill and unless the the field PSYST-IOPER is cleared explicitly in the program MP960500 (in PBO modules), this error should not occur.
Also is this error is coming only for 9605 infotype ? Also is any other info availaible in the error message such as entry in table t589a is not available for which value of OPERA (INS, MOD, DEL, LIS etc) ?
Regards,
Shrinivas

Error: No entry/entries in the table (WCCI)

Hello friends
I am trying to implement WCM to my client
when trying to change WCD i am getting the following error
No entry/entries in the table (WCCI)
    Message no. I4702    &
Error when executing function module (WCFC_PRINT_FORMAT_GET)
     Message no. I4804
Procedure
     Contact SAP.
i am not able to resolve the issue. Please help me in this regard
venkat

I have attached the screen shot.
Regards,
Amar

I am getting this iCloud error message at pc startup: The procedure entry point_objc_init_image could not be found in the dll

I am getting an iCould error message at PC startup: The procedure entry point_objc_init_image could not be found in the dynamic.....

i ahve same problem

I am running Windows7 on my PVC. When I log in I'm getting two Apple error messages. One says, " The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." The second says, "Apple Photostreams stop

I am running Windows7 on my PVC. When I log in I'm getting two Apple error messages. One says, " The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." The second says, "Apple Photostreams Uploader has stopped working". Help!

Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. If that doesn't help read on...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

Problem with the XI-Audit log entries in the table "XI_AF_MSG_AUDIT"

Hi,
I have an async-szenarios for PO:
We send Idoc's from SAP ERP to a WebService via SOAP. And we take Ack's. We use Integrationsprocess with deadline block to catche the errors after the retrying (three times) and to send they via e-mail.
Our problem is, the number of the audit logs in the table "XI_AF_MSG_AUDIT":
In the RTW only we see one audit log (with three retries) in an error case. But in the table XI_AF_MSG_AUDIT there are about 76 entries for the same audit log in the error case and about 20 entries in the case of the succuessfull processing.
This number of the entries in the table causes problem with the size of the redo log file and delete job of cours the large size of the table and therefore problem on the data base. The table can not be controlled. The delete job can not run and cancels every time due this redo log problems
What can cause that?
How can it be prevented, that so much entries are not be made in the table "XI_AF_MSG_AUDIT".
Best regards
Gueltekin

Hi Gueltekin,
I am only aware of the general property auditLogEnabled of J2EE Engine Service SAP XI AF Core, which controls in general (default = true) that entries in the AF Message Audit log are written at all.
(see [http://help.sap.com/saphelp_nw70/helpdata/en/5c/22ee41c334c717e10000000a155106/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/5c/22ee41c334c717e10000000a155106/frameset.htm])
I assume that your scenarios in the error case is sending up to three messages and for each message the number of audit log infos are created. You might want to check the detailed entries in the log and see from where they are comming, you might use customer modules etc. as well.
Best regards,
Silvia

PM01 - Custom Infotype "No entry in table T589A for P"

I created a custom PA Infotype with PM01 and now get error "No entry in table T589A for P". T589A is a table with function codes e.g. DIS, INS, LIS and also "P" & "Z". T589A is read when the dynamic PF-STATUS processing is done for Infotypes. I'm trying to do an insert with INS, but as the program tries to read from T589A, field PSYST-IOPER is blank. Any advice? Please assist. Thanks, Adrian

Just had to regenerate

"No entry in table T589A for P" for HR Infotype

Hi,
Does anyone knows why do I encounter this msg "No entry in table T589A for P" when I run HR_INFOTYPE_OPERATION for a specific customised Infotype. I am actually doing a Update operation that I encountered this problem.
Hope to hear from u soon. Will Award points for solution provided.
Lawrence Boey

Hi lawrence,
1. For the paramter OPERATION
in the FM,
pass valid values like
DIS INS MOD
2. For update, the value is MOD
3. All valid values are contained in table T589A.
regards,
amit m.

PT60 report err 'No entry in the table T555Z'

Dear All,
I tried to run PT61, but I'm getting the error 'No entry in the table T555Z'.
But it's negative time management and in IT0007 I have marked the time status 09.
Regards
Thomas

This error is caused because you do not have the entries in T555z under the PSG for Time recording (What ever has been for for this employee)
If you do not need this, you can comment out TIMTP function in the schema and then you should not get the error...

Error message 'No entry in the table T589A for P 2'

Similar Messages

Maybe you are looking for