Error when publishing Captivate 5 simulation to PDF.

Hello,
I am getting some shadows of lines whenever I try to publish a simulation to a PDF file. When I publish to HTML everything looks good and when I preview in captivate, everything looks good. I have tried to change the quality from low bit all the way to 24bit and still the same results. I Have attached a photo of my problem. Please Help!

I'm getting the exact same problem when publishing. And my settings are all set to the highest quality output too.
I need to get an answer to this problem as soon as possible as clients are needing their end product looking as good as possible as quick as possible.
Anyone with ideas?

Similar Messages

Adobe Captivate 6 Error when publishing

Help! I having trouble publishing a training that my employees can view. When they open the project they are getting the first image here that is essentially blank. I have attempted to reduce the size and save to different folders etc. but nothing seems to work.

Hi there,
Could you tell me the complete version of Captivate (Help > About Adobe Captivate). 6.0.1.240
Which version of Adobe Reader or Acrobat are they using? Adobe Reader XI
Can you publish this locally on your system (not to network drive directly), check force republish option also, and are you able to view it on your end? I can pull up the file from my computer that is saved in the same drive that the agents are attempting to pull up. But, I am not sure if it is viewing for me because I have it on my system.
Re: Adobe Captivate 6 Error when publishing
created by Varun Kalra<http://forums.adobe.com/people/Varun+Kalra> in Adobe Captivate - View the full discussion<http://forums.adobe.com/message/5855412#5855412

404 error when publishing to FTP server.

I'm getting the 404 error when publishing my iWeb site to my FTP server. Please help.
It says I have a good connection and publishes but then I get the error when I "Click to go to the site." I've read where I have to upload the file to my server but with the file index_html. Do I rename my iWeb file, domain, to index_html?

I'm getting the 404 error when publishing my iWeb site to my FTP server. Please help.
It says I have a good connection and publishes but then I get the error when I "Click to go to the site."
A 404 errors means the file is not on the server.
Checking the connection is just testing the FTP connection.
I've read where I have to upload the file to my server but with the file index_html. Do I rename my iWeb file, domain, to index_html?
Do I rename my iWeb file, domain, to index_html?
No, you don't. The domain file is where iWeb stores its assets. It stays on your computer. It has no meaning outside it. iWeb publishes the index.html file and all the other files.
Read this : The concept of iWeb Sites
So if your pages do not load, check for their presence on the server.

Error 500 Internal Server Error" When Generating Hyperion Financial Reports in PDF Format

We are unable to open pdf reports in Workspace with the following error. It was all working fine and doesn't work now for unknown reasons.
Error 500 Internal Server Error" When Generating Hyperion Financial Reports in PDF Format
We are on 11.1.2.1 environment. Ghost Script 8.54 and Java heap settings xms256m and xmx512m.
Please advice.

hello,
just to clarify
a) the parameter is named DESFORMAT not :DESFORMAT, there is
no : in front of the name, if you submit it via URL !
b) there are some issues with acrobat5 and IE but those are not
only caused by PDFs generated with oracle reports.
regards,
the oracle reports team --pw

Window error when publishing Muse change, can't pubish page update

Window error when publishing Muse change, can't pubish page update. Any suggestions?
It happens after I updated my website payment page with a new Paypal html. That html is below with x's put in to the code. Why doesn't Muse or Windows like this code in Muse?
<script type="text/javascript" data-pp-pubid="9xxxxx6cec" data-pp-placementtype="540x200"> (function (d, t) {
"use strict";
var s = d.getElementsByTagName(t)[0], n = d.createElement(t);
n.src = "//paypal.adtag.where.com/merchant.js";
s.parentNode.insertBefore(n, s);
}(document, "script"));
</script>

Window error when publishing Muse change, can't pubish page update. Any suggestions?
It happens after I updated my website payment page with a new Paypal html. That html is below with x's put in to the code. Why doesn't Muse or Windows like this code in Muse?
<script type="text/javascript" data-pp-pubid="9xxxxx6cec" data-pp-placementtype="540x200"> (function (d, t) {
"use strict";
var s = d.getElementsByTagName(t)[0], n = d.createElement(t);
n.src = "//paypal.adtag.where.com/merchant.js";
s.parentNode.insertBefore(n, s);
}(document, "script"));
</script>

Java Error When Publishing

So I have an applicational prototype that I need to have out by the end of the day today, and all of a sudden Flash Catalyst states that the project cannot be published due to an error. It also said to check the Code view to see what's wrong. Yesterday it did say that the error was a "Java Heap Space" error, but today there is absolutely nothing in the problems listing even though it still outputs that there's an error when publishing the project.
The prototype builds and runs in the browser just fine, but it's publishing that becomes the problem. I am not a Flex developer by any means, but as a user experience designer, I understand how to edit some of the coding, so if anyone could shed some light on this, I will do my best to fix the problem with any solutions that will work.
I appreciate the help guys!
-- Rick

To the original poster, Rick:
If you're seeing a "Java Heap Space" error message, this is a (not very user-friendly) way of the program telling you it's running out of memory. Catalyst tries to detect and warn you when your project is getting too large, but it's not always perfect.
Did you see any warnings about the size of the images you've imported into your project? Very large images can certianly be one source of problems.
Here are a few tips for dealing with large images:
Resize them to be smaller using a another app like Photoshop, before you import into Catalyst. Shoot for a file size of 100-300 KB at the most, for very large "gallery"-style photos. Other images should be < 100 KB (remember, people viewing your site will have to download all this).
In Catalyst, when you're done shrinking down an image to the right size, choose Optimize Artwork > Rasterize in the heads-up display to "lock in" the smaller size.
In Catalyst, choose Optimize Artwork > Convert to Linked Image for any especially large photos. This can speed up the initial load time of your site, and it will also help avoid memory problems when publishing.
Hope that helps!
- Peter

WorkFlow Error when publishing

Hello,
I am having errors publishing workflows. This was working and all of a sudden stopped. From the error message I am taking it as a permissions issue?
Here is the code it spits out:
System.InvalidOperationException: Operation failed with error System.UnauthorizedAccessException: Attempted to perform an unauthorized operation.
at Microsoft.SharePoint.SPAppPrincipalManager.GetManager(SPWeb web)
at Microsoft.SharePoint.WorkflowServices.SPWebWorkflowSecurityContext.EnsureAppPrincipal(SPWeb elevatedWeb)
at Microsoft.SharePoint.WorkflowServices.SPWebWorkflowSecurityContext.<SetupApplicationEcosystem>b__3()
at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<Run
Anyone have any thoughts? This happens with all sorts of workflows, even basic ones as shown in the above example!
Thanks,
Will

Hi,
For your issue, Re-register the workflow service using command:
Register-SPWorkflowService -SPSite 'https://myhost/mysite' -WorkflowHostUri 'https://workflowhost' -AllowOAuthHttp -Force
Reopened SharePoint Designer again and test again.
Here are similar posts, you can use as a reference:
https://social.technet.microsoft.com/Forums/en-US/61b2cfad-355d-4a43-8dd6-7d6813cd1b2f/sharepointdesigner-error-when-publishing-a-workflow?forum=sharepointcustomizationprevious
http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Error when publishing to file

i keep getting "an unknown error" when publishing to file or publishing all to mobileme...
It still works if i just publish to mobileme.
Any ideas?
Im trying to get my site going on go daddy, and kinda really need it in a folder...

If you are still getting the error then its likely that you have a corrupt domain file.
To prove this, quit iWeb, create a new folder on your desktop and drag your domain file out of - Home Folder/Library/Application Support/iWeb - into this.
Relaunch iWeb to force it to create a new domain file, add some content and try publishing to a folder.
If this works, your original file is corrupt.

SharePointDesigner - Error when publishing a workflow

Hi.
When i´m publishing my workflow, sharepoint designer rises the following exception:
"Error were found when compiling the workflow. The workflow files were saved but cannot be run." - "Unexpected error on server associating the workflow."
The workflow is really simple; i used some custom activities (to read details from an attached excel document) and then i have to do many checks and about 12 approvals.
I have recreated the workflow and it seems that adding the 7th approval creates this error; when publishing with 6 approvals everything is fine.
My Question: What is the error, where can i find more information regarding this issue, maybe it´s a bug in designer? Are there any known workarounds that can help? I really need so many approvals :-)
Is there a way to split the workflow in 2 or 3 parts, that can do the "job" of the big one?
I´m using Sharepoint Server 2010 with the current SPD (-> Microsoft Information Worker VM).
Thx for help

I finally found a solution how to solve this issue:
In the web.config file of the current site collection (where i was publishing my workflow) i have appended a timeoutvalue for my requests:
Old entry: <httpRuntime maxRequestLength="51200"/>
New entry: <httpRuntime
maxRequestLength="51200"
executionTimeout="300"
/>
This will give my workflow some more time to publish!
Source: http://www.manjuke.com/2011/05/fixed-sharepoint-designer-error.html

Publishing error when publishing one section

I am publishing my material per module and receive the following error when publishing one of the modules:
Publishing Activity Log:
Task
GMT Training Guide / Creating numbering styles in document
Path
/49b77e2d-7666-443e-a2fa-edbfc9aa22b2/Parts/pr.oxmlprint.multi.xml
Comment
Processing project failed
Ref. #
-1673847682
All of the other modules publish with no problems.
Any assistance in this regard would be much appreciated.
Thanks,
Angie

Did you copy the text in there? Could be the following:
The problem is related to concept frames. Some concept frames have not regular charachters. Those characters aren't visible in the edit mode. The are only visible if you copy the text of the concept frame to word. In word use the button "display unknow characters". It seemed like they will appear if you copy and paste text in the conceptframes.
You need to copy the text of the editor to Word. Click on the button "display unknown characters" to see all characters in text (including e.g.enter and spacebar). Remove the strange characters such as small circles. Copy the text and paste it back into the editor.
Save the editor (and publish again).
Good luck.

Captivate 6 - Error when publishing to Adobe PDF

Adobe Captivate CS6
Windows 7 (Pro)
Adobe Acrobat 9 (Pro)
Previously, with Captivate 5.5, I was able to Publish > SWF/HTML5 > Export PDF and use the PDF file to use for a review. However, with Captivate 6 I get an error when I attempt to publish my lessons to PDF. The image below shows what appears when I publish:
Has anyone had this problem and found a solution? I am not sure what I might have setup differently to cause this error.
In case it helps, here is my Publish screen:

Hi - if you search you will find a few questions varying on this theme, and I'm having a similar problem. It seems as though it may be related to Flash and Reader versions, as when Reader 10.1.4 upgraded automatically to 10.1.5 suddenly I was unable to read any new or previously working PDF files. I also had a colleague say that if he rolled back to Flash 11 (no later than just Flash 11) it started working again. If you want to try this, you can download an older version here - http://get.adobe.com/uk/reader/otherversions/
If this is the case, there seems to be no solution as yet (I happened to log in to make sure there had been no replies and saw your message!), but you can keep an eye on this thread to see if anything is posted here - http://forums.adobe.com/message/5011573#5011573
Cheers,
Jac

Error when publishing AICC

I am getting the following message when publishing in
Captivate 3.
"The reporting type selected for this project is AICC which
is unavilable with the standard publish."
Any idea on how to correct? Thanks!

MaryLou,
When you are publishing - are you publishing to an EXE file?
I could expect
an error like this if you are trying to publish to EXE and
potentially other
formats.
Regards,
Andrew

Duplicate Object Name Error When Publishing Crystal Reports from BW to BOE

Hi,
We recently upgraded our systems (all client and server) to SP2.7 in order to solve a problem with saving Crystal Reports to BW. Now we are experiencing a new error when trying to publish a Crystal Report from BW to BOE (either all in one step from Crystal Reports application or directly from within BW).
Upon trying to publish a Crystal Report from BW to BOE, we get the following error:
"An error occurred while saving and / or publishing. The return code 1 was returned from the server. Logon to Crystal Enterprise failed. Unable to commit the changes to Enterprise. Reason: Failed to commit objects to server : Duplicate object name in the same folder."
We have repeated this issue numerous time with different reports, users and logon credentials and have verified that there are NOT any duplicate object names.
Additionally, in some cases, the report ultimately publishes to BOE, but with the above error interruption along the way.
Any ideas?
Thanks,
Josh
Edited by: Josh Crawford on May 10, 2010 9:46 AM

Ingo,
Apologies for the delayed response. We've spent a few days poking around with this issue, and had even opened a customer message for it (13641).
In the end, it seems that the problem was somehow associated with the "Prepare this report for translation." flag in the "Save to BW Options" dialog box of Crystal Reports. If we try to Save & Publish with the Translation flag selected, we get the duplicate entry error. If we Save & Publish without the Translation flag selected, everything is fine.
There are still some details we need to look into, but for the time being it looks like we don't have an issue anymore(assuming we ever did) as we're not concerned with Translation capabilities.
If we come across the problem again, I'll post again.
Thanks,
Josh

IMovie 11 error when publishing to Youtube

Get the following error when attempting ro publish to Youtube.
"Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (-50)"
I have 71 Gb available from 500 GB (14%). I have also made sure all folders in the "Movie" folder have permissions set to Read/Write and verified and repaired my HDD.
I just upgraded to iMovie 11 in hopes the problem would correct itself, but it did not.
Any help would be appreciated.

Make sure you are using the right password for YouTube. A few months back, they had everyone link their YouTube account to a Google account. If so, you may need to use the YouTube username, but the Google account password.
Try going to the YouTube web page and uploading it there. The same password should work.
Message was edited by: AppleMan1958

Error when publishing web templates in the portal

hi Gurus,
I am getting this error when I try to publish my web report on the portal,
Field E_SX_META_DATA not a member of OUTPUT.
Can anyone please let me know how to go about fixing this error ?
Thanks in advance,
Nip

Hi,
You mean you want to execute the template even after this design time error. If yes then you can simply go to the backend and Transaction "SE38" then in the next screen type "RS_TEMPLATE_MAINTAIN_70" and then in the next screen type your template name ans then press "Execute" button to see temlate in Java Web.
Imran...

Error when publishing Captivate 5 simulation to PDF.

Similar Messages

Maybe you are looking for