File to Mail with the same name

Hi SAP Heros,
Can somebody please tell me how to generate the same file name on the receiver mail adapter.
Example
File (file name =unknown.xml) -
> XI -
> Mail (file name =unknown.xml)
I don't know the name of the sender file name , I only know the location so I have write *.xml in input file name but not sure how to generate the same file name for mail adapter.
My scenario is that I need to send the email with payload attachment but with with the same file name.
Can somebody please help me in regards to this issue.
Thanks,
Iqbal

Hello,
I also had the same requirement and I too used adapter module.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/02706f11-0d01-0010-e5ae-ac25e74c4c81?quicklink=index&overridelayout=true. THis link will help you to create the module and implement in XI.
Implement the code which Stefan provided in the above link.
Regards,
Tiny Mampilly
Edited by: TINY MAMPILLY on Jul 5, 2010 1:29 PM

Similar Messages

Is there any option to recover a file we saved with the same name that other by mistake in a MAC PC

is there any option to recover a file we saved with the same name that other by mistake in a MAC PC

There's a slim chance. +*Stop using the drive IMMEDIATELY.+*
Then see: [Data Recovery|http://web.me.com/pondini/AppleTips/Recover.html].

Bridge copy and paste folders with the same name question

I just copied and pasted a folder named, as an example, "concerts" with a bunch of pictures to another drive with a folder with the same name.
I choosed "substitute" when prompted and all the pics existing in old "concerts" folder have been deleted and replaced with just the new ones.
So pasting a folder can't add files to the folder with the same name, but it completely replaces it. The other prompted option creates a "concerts (1)" new folder.
Luckyly before moving files I always do a backup, so it's not a big issue, but I'm amazed by such behaviour. Also deleted pictures don't appear in the recycle bin. They are completely lost!

I choosed "substitute" when prompted and all the pics existing in old "concerts" folder have been deleted and replaced with just the new ones.
Are you on Windows? don't know the options you tell, I have three options (Mac) called: 'cancel', 'replace' and 'auto resolve' when dealing with one file and for multiple files it adds 'skip' to the list and has the option for 'apply all'
Replace does what it says, it replaces files and folders with the same name, auto resolve adds a (1) to the files or other number if more with same name are added.
So pasting a folder can't add files to the folder with the same name, but it completely replaces it. The other prompted option creates a "concerts (1)" new folder.
This is normal and wished behavior, you get a warning if names are the same and a choice to either overwrite them or add them with a new (different) filename.
Luckyly before moving files I always do a backup, so it's not a big issue, but I'm amazed by such behaviour. Also deleted pictures don't appear in the recycle bin. Completely lost!
Heard that before but can't replicate this, they always appear in the trash on my Mac.

My goal: "convert into pdf" -- the file is instantly saved with the same name as pdf. feasible?

Good evening dear experts,
i use Adobe Acrobat 9 pro extend to convert word, ppt, jepgs etc. into pdfs.
No if i
1) convert a ppt into a pdf: it asks --> "save as" --> converts --> opens the file
2) convert a jpeg into a pdf: it instantly --> opens the file as pdf --> i need to save it manual under "save as"
In both cases i want to
my goal: "convert into pdf" --> the file is instantly saved with the same name as pdf
WITHOUT asking me "save as" + "opening of the file".
Is the possible, and if yes, HOW ?
A fast answer is very very much appreciated, for i have to convert hundreds of files tonight in order to get it into 1 pdf
Thx and greetings from Germany,
Julia

We are nearly there!
A] - righclick "convert-to-method": @Bill: thx again, your approach worked for ppt, doc-files etc.
2 problems:
1) exception: for jpegs/bmps it doesn't work (the file is still opened after conversion, strange).
2) the output-folder. it only accepts the standard "output-folder documents/*.pdf" (which is a step further but not my end-goal). If i choose another output-folder via "browse", this setting is NOT SAVED (even after clicking on "accept" + "ok").
my goal: the the file should be automatically saved in THE SAME folder the original file is in (seems that can't be achieved and the standard folder is the only thing where to convert in?).
Personal background for understanding: i have many folders with several ppts in it. Once i send it out to a customer, i always have to convert it into a pdf. thats why i want to save time (i know that i can convert it directly + send per mail, but i want an up-to-date copy of the pdf in the folder as well).
B] - "the automated solution"- @Sandeep:
i just watched your link http://tv.adobe.com/watch/acrobat-tips-and-tricks/automating-tasks-in-acrobat/
about batch processing and i think its really helpful if i want to convert ALL of the files in one folder.
1 question regarding this: are the subfolders also affected?
As i understood from the video, i choose 1 "watched folder" and a "destination folder" (can be the same). E.g i have 1 big folder "designs" with many subfolders. I create a batch converting ppts to pdf to "the same folder" Once i run my batch, it converts ppts in the chosen folder "designs" + all subfolders into the same folder, right?
If this is the case, i get too many pdfs, for i only need the latest ppt-version to be converted (copies of old ppts are also in the files) ;(.
Do you have an idea how can i solve this?
Now we are very near to the end-solution of my goal:
i need this option "to the same folder" in my general settings when i convert a file via right-click. ATM it only works with the standard-folder documents/*.pdf
In A], my files are now instantly saved with the same name in 1 specific folder. I would be completely happy, if this folder would be alwys the same as the one with the original file (and not 1 specific folder)
2nd problem with a]: it does not apply to picture files (bmp, jpegs..)
So if we could solve this, i would be a completely happy girl
Guys, you are great, thx again for the whole struggle with my concerns!!

Two groups with the same name in File and LDAP realms

Hi,
I configured WLS 6.0 SP1 to use an LDAP caching realm
as default one. In the LDAP server (Netscape Directory)
I have a group called Administrators. There is a group
with the same name in WLS own File Realm. When I click
on the Groups menu item in the administration console
I only get the Administrators group from the File Realm
listed. Is that expected? What will happen if I protect
a resource ti the Administrators group? Which one will
prevail - the one from the LDAP or the one from File
Realm? Or maybe the two will be merged?
Regards,
Plamen Petrov
AstraZeneca
Sweden

Hi
First of all I want to know that where you created your class, In SE24 or in any programm.
if in SE24, then go to se24 open that class go to methods tab and check if that method name accurs at two places, if not, then
click on that method and check the code.
or if in a program.
then you must have defined like
class <class name> definition.
public section
method <method name>
endclass.
class <class name> implementation.
method <method name>
code for that method.
endclass.
It might be possible you have set the implementation part twice for that particular method, So please check and delete one implementation for that method.
Thanks
Lalit Gupta

Updating vs. Deleting Folder files with the same name

Hello all,
Bear with me as I try to explain this.
First off, I'm a long time Windows user who just happily converted to Mac. I'm loving my mac so far, but I've run into a snag that I hope to get clarification on.
Let me set up a scenario on how this works with Windows.
Let's say I have two folders/root directories labeled as today's date "20100729" with image files in them. Each folder has different picture file names. In other words, the files in each of folders are different. The only thing that is the same is the Folder/Directory name, which in this case is "20100729".
So, in a windows environment let's say that each of these folders (with the same name) are located on 2 hard drives (A & B). If I take the folder from drive "A" and drop it in drive "B", windows seamlessly combines the files from both folders into one.
On the flip side, when doing the same thing on my Mac, the entire folder contents from drive B gets replaced from drive A, even though the file names are all different. Which is very annoying.
If you understand what I'm saying and know of a way for this to work the "Windows" way please let me know.
Thanks in advance for your help. Let me know if you need further clarification.
Cheers,
- Jeff

Use the ditto command in the Terminal, which is in the /Applications/Utilities/ folder; for instructions on its use, enter 'man ditto' without the quote marks into the Terminal prompt.
(53065)

How can I overwrite a file with the same name in Content DB?

Hi All,
In Content DB if I upload a file with the same name as a previous one, the application shows the warning message:
" ...You cannot upload "XXXXXX.doc" to "Test 1" because an item with the same name already exists ..."
And the alternatives are "Create Version" or "Cancel" the operation. Is there any way to overwrite a previous file as we can do it in Oracle Files ?
Regards
Harvey

Hi All,
Can anybody from the Content DB product development answer this question?
Regards
Harvey

HT5767 My mail all of a sudden would not allow me to delete messages in my inbox saying, "couldn't be copied to "Messages" because an item with the same name already exists." Found it duplicates the message I wanted deleted in trash.

Still using the @mac.com mail address and up to date on everything, but have not gone to Maverick. All of a sudden Mail wouldn't let me delete. Said that title of email was already in trash. And sure enough it was. Clicking on the help button on the message gets Nothing.
The selected topic is currently unavailable.
The topic you were trying to view could not be found.
"couldn’t be copied to “Messages” because an item with the same name already exists."
Any ideas. My mail is not tied to gmail etc.. just all by it's lonesome.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

After installing latest update Realplayer recording no longer works, I think Mozila is using a library file with the same name

After installing the latest update to Firefox onto Vista operating system the record part of real player no longer works, I think Mozila and Real are using a library file with the same name and the Mozila update is overwriting a Realplayer library file.

I was giong to say, "Help me, Adobe Joe Kenobi", but it looks like you're growing a beard waiting for an answer, too.
The same thing happened to me today. I trusted the "update" message since it was from Adobe, and apprently did so at my own peril. Now I get the "failed to load Core dll" message with a secondary reference to a memory address.
Just an observation, but what good are these forums when there are no answers? I see this problem as "Caused by Adobe Update", and would expect them to troublshoot and offer up a remedy. Since you've been waiting over two months with no response, I suppose it's time to trek off wasting more of my precious time to fix their problem. If I find the solution, I'll post it back to you.
May the Force be with you.
Mark

For each loop in case of more file with the same name

Hi, guys how works ForEachLoop in case of double file? Let's say that we got five excel file. A.xls, B.xls, C.xls, D.xls, A.xls. We got two file with A.xls. I'm going to assume that both file will be loaded. It's correct?
I'm asking this because I need to check if I got two file with the same name ( I got hundreds of file to load). And in the same time I need to avoid to load two file with the same title ( cause I could double the data)

If there are duplicate file names in subfolders then you should fill the variable with the complete path. See C in this images:
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

The same file with the same name need to call two RFC's with the sequence

i have to pick up the same file with the same name and call the two RFC in sequence
scenario.i have xxx.txt file.file should be proces first calling the first rfc .
I created two different communication channels
for the first sender file communication channel i should not use processing mode archive,delete,Test
and only option is set read only.
if i set the read only the file ..then i can not use the same file again to call second RFC.
how we can acheive the above scenario?
Regards,
Hyma

If you want to file need to be picked up twice in same folder, it seems it is hard for PI adapter to achieve it, you should look for API's that control adapters availibility.
But if you have different folder, then it make your scenario simpler since you can process first time, then output to another folder, configure another adapter to pick up from different folder.
Regards
Liang

When saving files under options the file name is duplicated how to remove extra folder with the same name

Under Firefox Options I clicked Saving Files under Downloads but the file name appears twice and an extra folder with the same name is created within the folder i.e.:
G:\Akbar's Songs\HAMARA FORUMS DOWNLOADS\HAMARA FORUMS DOWNLOADS
As you can see the folder is repeated, how can I correct this?
Also the music files I download from a site downloads as WinRar file and I need to open it. Is there an option where the files open automatically in the folder I have selected?
Many thanks for your help.

The "beta" version is for testing and may be more prone to problems, so I suggest trying the regular version (9.20) even though it hasn't been updated since 2010.

How do I make Applescript to compress 2 filez with the same name?

Hello guys and thank you for reading this!
I don't know a lot about programming, but i believe applescript can save my life. What I need is.
Detecting 2 files with the same name, but differnt extension. (song 1.jpg, song 1.mp3)
Compressing those 2 files into a single .zip (In the end I would have song 1.jpg, song 1.mp3 and song 1.zip
And that's it! I know its pretty simple, and I've seen the "Create Archive" in automator, but I don't really know how to tell him which files to Compress.
Thanks again!

Hi,
Try this script :
set sourceFolder to choose folder
tell application "System Events"
      {name, name extension} of (files of sourceFolder whose name extension is not "zip")
      my compress2FilesSameName(the result, sourceFolder as string)
      repeat with i in (get folders of sourceFolder) --check in subfolders
            {name, name extension} of (files of i whose name extension is not "zip")
            my compress2FilesSameName(the result, path of i)
      end repeat
end tell
on compress2FilesSameName(tList, tFolder)
      set tnames to item 1 of tList
      set tExtensions to item 2 of tList
      set tc to count tnames
      set j to 1
      repeat while j < tc
            tell (item j of tExtensions) to if it is not missing value or it is not "" then
                  set n1 to (count) + 2
            else
                  set n1 to 1
            end if
            tell (item (j + 1) of tExtensions) to if it is not missing value or it is not "" then
                  set n2 to (count) + 2
            else
                  set n2 to 1
            end if
            set name1 to item j of tnames
            set name2 to item (j + 1) of tnames
            if (text 1 thru -n1 of name1) = (text 1 thru -n2 of name2) then -- same name
                  set tFile1 to quoted form of POSIX path of (tFolder & name1)
                  set tFile2 to quoted form of POSIX path of (tFolder & name2)
                  set zipFile to quoted form of POSIX path of (tFolder & (text 1 thru -n1 of name1) & ".zip")
                  do shell script "/usr/bin/zip -j " & zipFile & " " & tFile1 & " " & tFile2
                  set j to j + 2
            else
                  set j to j + 1
            end if
      end repeat
end compress2FilesSameName
if an archive already exists with the same name (in the parent folder of the files to compress) , the ZIP command overwrite this ".zip" file.
Example with "song 1.jpg", "song 1.mp3" and "song 1.zip" :
If "song 1.zip" doesn't exist, the ZIP command create the "song 1.zip" file.
If "song 1.zip" exist, the ZIP command overwrite the "song 1.zip" file (it will not create a new archive).

Purpose: to create photo galleries to insert or not items: 1) with phocagalery, it works 2) with the transfer via lightroom, I do not see the downloaded files but if I want to create a directory folder with the same name, he said he is already, I see noth

purpose: to create photo galleries to insert or not items:
1) with phocagalery, it works
2) with the transfer via lightroom, I do not see the downloaded files but if I want to create a directory folder with the same name, he said he is already, I see nothing in the media in content management
Can you help me

Mahsa21,
We are glad that we were able to resolve the international calling plan issue for you. If you need assistance,please reach out to us.
thanks,
Tonya D.

Cloning OS2 HDD to USB stick hangs at a file with the same name ???

Hi,
I'm dragging my MacIntosh HD icon to a large USB stick in order to clone it because I'm going to install OS X Tiger onty my iMac G3/400 DV SE. The copying initiates, it starts, and after a few hundreds of MB's a small window pops up with this remark (translated from Dutch) :
" The file XXXXX cannot be copied because another file with the same name exists already." The window has two buttons : STOP and Continue. No matter which button I click, the process stops and I'm left with a few hundred MB on my USB stick. Deleting the "double" file doesn't help because a few minutes later another one pops up.
How is this possible? The USB stick is completely empty! Can anybody tell me what's going on and how to stop this, otherwise I'll never be able to clone the HDD.
Thanks for your kind information,
Paul

It was a bug in Classic OS, which was manifest in certain circumstances. My workaround was, at that time, to isolate the rascal (was possible, like in your case), eliminate it, then add it later.
Such events may occurs with Mac OS X files too, I cannot figure out why. One or two apps in my software archive usually do that.
another workaround it to archive it (.zip now, .sit in classic Mac OS), check whether applicable.

File to Mail with the same name

Similar Messages

Maybe you are looking for