Found the reason why my Dreamweaver's "Preview in Firefox" wasn't working

In some of the Dreamweaver forums, there were some users whose "Preview in [Browser]" suddenly wasn't working. I had that same issue, but I did some experimenting, and I found out why—at least in my case—why a particular html file, when opened in my Mac's Dreamweaver CS6, Version 12.0, wouldn't preview in my Firefox browser. I noticed that the filename contained a question mark. When I deleted that question mark from the filename and then opened that html file back into Dreamweaver, the "Preview in Firefox" worked fine. For a test, I closed the file, typed a question mark back into the filename, opened the file into Dreamweaver, and then that "Preview in Firefox," once again, didn't work. There may be additional characters in filenames—other than the question mark—that could cause problems with Dreamweaver's preview feature.

Rob Hecker2 wrote:
Ken, why do you say no numbers at the beginning of file names? That's true of variable names but not file names.
Thanks Rob -
I'm 80 years old, so I've probably got some ancient "best" practices in mind.
While this isn't absolutely required, some programming languages give numbers special notice, and so a file starting with a number might not be treated as a file.

Similar Messages

Found the reason why my battery life was short

As topic says, I found the reason why my battery life was short.
Having had the Iphone 4 since launch, I've always been impressed by the battery life.
So when it started to go from 100% to 50% overnight, with no use I started wondering what caused this.
I my case it was the wireless network, before I used to have just one wireless router, but recently I bought a accesspoint using it as a signal repeater(booster), giving me 100 % wifi coverage at home.
Since the repeater has the same wireless SSID as the router it seems to confuse the iphone, making it switch between connecting to the router and the accesspoint nonstop and therefore draining the battery.
Disconnected the accesspoit and now things are back to normal.

If you have just one wireless router you can't turn the accesspoint off, you could try turning wifi off on the phone and see if that helps.
In my case the wifi range of the router and the accesspoint overlapped each other, making the iphone constantly switch between them.

When i open my computer this appears "c:\Programdata\AppleVerifierPolicy.dll the specific module caould not be found" i think this may be the reason why i can not open itunes store

when i open my computer this appears "c:\Programdata\AppleVerifierPolicy.dll the specific module caould not be found" i think this may be the reason why i can not open itunes store

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

I need to know the reason Why Macbook Pro Mid 2012 have yellow tint screen?

I am confusing about the reason Why Macbook Pro screen have yellow tint color?
There are few reason that I got from some apple shop saleman(In Thai) and someone in discussion experience.
First (1), The reason is IPS or PSL Technology made the screen to be yellow tint color.
Second (2), Someone told me, It is depend on production lot some lot don't have yellow tint screen but, some lot have yellow tint screen.
Third (3), Someone told me, It is normally case of Macbook Pro Mid 2012. Yellow tint screen will be recovering when using it long time.
(In the third, I'm not believe. Because, My iPhone 4s got a Yellow tint screen too. And, I used it for 7 months. The screen was the same at 7 month ago)
I need to know that what is true and what is false.
I just confuse Plz answer to me.
And, ...
Now, I am deciding to buy Macbook Pro Mid 2012 13 ". I need to know the surely reason. Why Macbook Pro have a Yellow tint Screen?
If it is not normal case when I found a Yellow Tint Screen. I will reject that machine.
so that, I used the knowledgeto select the best Macbook Pro for me.
Plz answer to me, Plz Help me ^^
Thank you

Hi, carl wolf
Thank you for your answer.
You mean the below reason is hoax or incorrect or fake right?
First (1), The reason is IPS or PSL Technology made the screen to be yellow tint color.
Second (2), Someone told me, It is depend on production lot some lot don't have yellow tint screen but, some lot have yellow tint screen.
Third (3), Someone told me, It is normally case of Macbook Pro Mid 2012. Yellow tint screen will be recovering when using it long time.
Sorry for more question. I fear saleman lie me when I go to buy.
Thank you very much. ^^

Pls take note that my IPad 3 used to find my printer HP wireless D110. The only thing that I did was to update to IOS 7. Do you think this is the reason why my iPad cannot find my wireless printer?

Pls take note that my IPad 3 used to find my printer HP wireless D110. The only thing that I did was to update to IOS 7. Do you think this is the reason why my iPad cannot find my wireless printer?

1. Turn the router, iPad and printer off
2. Turn on the router and then wait 30 seconds
3. Turn on printer and then wait 30 seconds
4. Turn on your iPad and test print.

Can anybody help me in finding the reasons why the time of email received are different from the one on my macbook which time is correct

Hi
Can anyone help me in finding the reason why the date on e=mail reced is different from the one on my MacBook eventhough it is correct
Thanks

Try this...
Triple click anywhere in the line below to select it and press Ctrl+C to copy it.
cmd /k netsh winsock reset
Press the WinLogoKey+R to open the run dialog, then Ctrl+V to paste, then press enter/return.
You should get something similar to this:
Reboot the computer and the problem should be resolved.
If it doesn't work then perhaps a full tear down and rebuild of iTunes will fix things. See Troubleshooting issues with iTunes for Windows updates for details.
tt2

Anyone know the reason why app store in iOS 6 is crashing all the time?

Anyone know the reason why app store in iOS 6 is crashing all the time?
Tried everything. Reset my iPod touch to fresh version of iOS 6 and still issues. I believe that there is a bug.
APPLE: please FIX ALL THE BUGS IN IOS 6!!!!!! Please do it fast!!!

I am having the same problem, but I think I might know what's causing it. I just updated my girlfriend's iPhone 4S (same phone as mine) to iOS 6 and was surprised to find that her app store is working just fine. When I opened hers, however, I did notice that the "Categories" and "Top 25" buttons are totally different; and those happen to be the two buttons that are not working for me. Mine shows the same that yours does, while hers has the "Genius" and "Charts" buttons in the place of the two that are not functioning for me. I believe these old buttons are no longer active and therefor are bombing out when attempting to access them.
Now I said I think I may understand the problem, but unfortunately I have no idea what the solution may be. Hopefully this tread doesn't fade away and our problem gets addressed.

What are the reasons why a wideband modem can not take a CPE?

I have an M-CMTS with RFGW1.
I have the following settings:
int c6/1/3
downstream Modular-Cable 1/0/0 rf-channel 16-17 upstream 0-3
int c6/1/4
downstream Modular-Cable 1/0/0 rf-channel 18-19 upstream 0-3
cable fiber-node 9
downstream Modular-Cable 1/0/0 rf-channel 16-19
downstream Cable6/1/3
upstream Cable 6/1 connector 12-15
cable fiber-node 10
downstream Modular-Cable 1/0/0 rf-channel 16-19
downstream Cable6/1/4
upstream Cable 6/1 connector 16-19
interface Wideband-Cable1/0/0:4
load-interval 30
cable bundle 1
cable bonding-group-id 5
cable rf-channel 16 bandwidth-percent 45
cable rf-channel 17 bandwidth-percent 45
cable rf-channel 18 bandwidth-percent 45
cable rf-channel 19 bandwidth-percent 45
the cable modem gets online, but does not take cpe, my question is why?
D2.0 modems do take CPE, but the 3.0 modems do not. I know that may be a problem in the RFGW1 because another time I changed the port and it worked.
but I would like to know the reason why only the wideband modems are not taking cpe.
I'd like to hear from you.
thanks in advance

Hi Diego,
- The first time that was put online, it became as w-online and take CPE (The DHCP assigned IP addresses both, Modem and CPE)- But it did not work, so I reset the modem, and went online again, (but did not have a CPE IP address)
I'm not following you here. In the first point you mentioned that the modem came w-online and the CPE got an IP. However, in the second point, you mentioned that it didn't work and then you reset the modem. What didn't work (I understood the problem was CPE getting IP address which, as you mentioned, was done on the first point)?
You also said that, at some point, the modem was online but not pingable. The CPE didn't get IP that time. In that case, was the modem online or w-online? What was the primary channel for this modem? Take into account that, for wideband, the modem uses the primary channel to register and perform all Docsis operation. Any data traffic (like a ping or a DHCP request from a CPE) will use the secondary channels. If these channels have some issue you may see an issue as the one described.
For the D2.0 modem using Mo1/0/0:16, it could be similar as above. If this channel is OK but the rest have some issues, you could see a behavior like that. The D2.0 modem will use the primary channel (only channel) also for data transfer. Since this channel is OK, the D2.0 modem don't have any issue. However, if a D3.0 modem uses Mo1/0/0:16 as primary it may come online (since the channel is OK) but, if the rest of channels have issues, then you may have problem to pass data traffic.
Did you check if D2.0 modem can use all the channels? You may also want to check the modulation profiles being used. It could be that you are using a lower modulation profile for ranging (initial, station maintenance) and a higher one for data transfer which may be affected by some condition in the network.
Best regards.

MBP very slow. OS upgrade the reason why?

My 3-4 year old MacBook Pro has gotten really slow last few days. I recently had to upgrade to Snow Leopard for a software compatibility reason. And also I recently had to upgrade my Photoshop version from CS3 to CS4. All within last week or two. Could these upgrades be the reason why it's now so slow? Is there some way to 'clean up' the computer -- maybe it's bogged down with stuff. I do keep CS3 as well as CS4 because I prefer CS3 (had to get CS4 because of new camera). Thanks.

"How can I find out what is sucking up all this space and trash it."
OmniDiskSweeper should have showed you which files are +"sucking up"+ your space.
*A few suggestions (some of which you may have already done):*
Empty the trash!
Open up your application folder & go through all your apps. Trash all the apps you no longer want and/or use.
An easier way to do this is to open the Application folder in list view & press the Command+j keys.
In the the dialog that appears, click the "This Window Only" button & the "Calculate All Sizes" check box.
Wait a bit until your file & folder sizes have all been calculated, then click the "Size" column to sort your apps from the fattest to the most anorexic.
Get rid of all your photo files you don't want and/or need. Same goes for those pics off the websites you downloaded (gifs, jpegs, etc.).
Get rid of all your music files you no longer listen too. Especially, if you already have the actual CD/DVDs or you can later re-download from a website.
Use Spotlight to make sure you got rid of everything. You can even trash directly from Spotlight!
Drag what you don't want and/or need to the trash. Better yet, download this neat little shareware app demo called AppZapper. It basically does all the work for you by not only trashing the apps but the apps preference files, caches & all its associated files.
Another software that does the above is AppDelete. Best of all this software is free!
Burn what you want and/or need onto CDs or DVDs.
Not everyone has the luxury of purchasing an external HD and/or Mobile accounts to store their "stuff, junk, music & photos".
You can check with your ISP to see if they offer free storage space. Most if not all do now-a-days.
There are thousands if not millions of free storage facilities on the web also. Use your favorite search engine to search them out as they come in different storage sizes to fit your needs & wants.
Check for duplicate fonts.
Applications>Font Book
Select “All Fonts”
If you see any “black dots” next to any fonts this mean you have duplicates and/or multiple versions of these fonts.
To clean this up, select a “black dotted” font or the Apple + click to select multiple dotted fonts;
Edit>Resolve>Duplicates.
What the above does is turns off the duplicates & multiple version fonts. Not delete them.
More than likely the “extras” were installed by other programs and/or other users.
Clear out font caches
Use FontNuke. It does all the work for you. And, best of all it’s FREE.
Printer Drivers
Get rid of all the printer drivers you don’t need & use except the ones for your current printer(s)/scanner(s).
HD>Library>Printers Folder
If you accidently threw something out that you needed for your printer/scanner it can be easily obtained from the manufacturer’s website and/or from the CD that came w/the printer/scanner.
Garage Band
Has about 1GB of loops stored. Get rid of some some them. You surely don’t use, like and/or need them all.
HD>Library>Audio/Apple Loops>Apple>Apple Loops For GarageBand
Or just get rid of the Garage Band app altogether if you don’t use it.
Get rid of extra languages
Strip your computer down to your “native” tongue.
You can do this with a FREE utility called Monolingual. Another app that apparently does all the work for you. I’ve never used it. However, a lot of users here swear by & recommend it highly.
However, there is a warning for *native English speakers*. Make sure you keep BOTH English and English (United States).
Other Resources:
HD Space Checkers:
Disk Inventory X (FREE)
WhatSize (SHAREWARE)
OmniDiskSweeper (FREE)
GrandPerspective (FREE - donation)
Knowledge Base Article http://docs.info.apple.com/article.html?artnum=303602 Mac Maintenance Quick Assist
Scroll down to "4) Prune Through Your Files".
Slimming your hard drive
Rule of thumb: You should never let your hard drive get to where you have only 10-15% of space left.
!http://i50.tinypic.com/izvwo1.gif!

What are all the reasons why imessages turn into text messages...such as the recipient is talking on the phone, etc.?

what are all the reasons why imessages turn into text messages...such as the recipient is talking on the phone, etc.?

Hi,
What's the worst that I've spent 100 Eur alltogether for GPS map based applications for several sports - golf, bike, ski, etc. These applications use data from iPhone Map application and its disaster after my update onto iOS 6. These are pictures of 2 of my favorit golf resorts:
And here one example from a place where I use to bike:
Very nice, isn't it?
And unfortunately this problem won't disappear even when Google put stand alone map application into iStore.
So I have only way to downgrade to 5.1.1 immediately to not throw away money I already spent.
Ivan

Please explain for me the reason why?

I have a query follwing:
select a.cell, money, case when a.cell in (select cell from danhba where desc <> 1)
then NVL(vat, 0) else 0 end vat
from
select cell,sum(money) money, NVL(sum(vat),0) vat
from summary
where item_id =100 and object_id not in (2,3,4,21)
group by cell
) a
This query is ok and records are returned
But when i modified that query to:
select * from (
select a.cell, money, case when a.cell in (select cell from danhba where desc<>1)
then NVL(vat, 0) else 0 end vat
from
select cell,sum(money) money, NVL(sum(vat),0) vat
from summary
where item_id =100 and object_id not in (2,3,4,21)
group by cell
) a
) where vat = 0
Then, PL/SQL show error: ORA-03113: end-of-file on communication channel => next message: ORA-03114: not connected to oracle.
I don't know the reason why?
Can anybody explain that error for me?
Thanks in advance!
Edited by: xi`tin on Sep 15, 2009 12:54 AM

This normally happens when you've hit a bug.
There should be a trace file generated which will contain some further information, possibly an ORA-0600 error.
You should open a support ticket with Oracle / use the ORA-0600 lookup tool on metalink if relevant.
Even if it is a big, you may find that you can avoid the issue by rewriting your sql, often using the WITH statement.

The reason why time capsule running so slow

Temperature is the killer of Time Capsule!
I am live in Hong Kong, a very hot city, and using 500GB TC for a few weeks and experiencing all the problem other user mentioned already in this Forum. Base on my experience, if I turn on Time Capsule and running in Room temperature, it only running slowly and slowly and slowly! But after i turn on my room air-conditioner, TC working fine without any problem~~~
The reason why TC can't work in room temperature (I guess) is TC using Server HardDisk which designed for high performance server and running in GOOOOOOOOD temperature controller environment~~
If you don't have or don't want to turn on air-con. for TC, turn to put a big FAN near your TC and I hope it help.

Read the specs of TC - it clearly states that max operating temperature shouldn't exceed 35 degrees Celsius. Place a thermometer next to TC and monitor the temperature - you'll see that area around TC is always few to several degrees higher than your room temperature in any other place. So, if you are not using AC then your room temperature easy gets now to well above 30 C when outside is exactly 30 C. All your computer stuff and your body are generating heat and adding to the temperature. Thus you are for sure exceed max allowed operating temperature of 35 C around TC.
Also TC needs humidity below 80% (non condensing) to operate - at this moment there is 91% humidity in HK and if you are not running AC and keep windows open then you are again trying to operate TC in humidity well above max allowed.
TC's Environmental requirements:
Operating temperature: 50° to 95° F (10° to 35° C)
Relative humidity (operational): 20% to 80% (non-condensing)
Keep AC on at all time in HK my friend, except in the winter when humidity goes down. And keep good device monitoring temperature and humidity next to TC as well.

Hi my name is Al-Ameen, Am from Nigeria,actually my brother from the united kingdom sent me an iphone5, So when i insert my Sim card i discovered the iPhone is locked. So the reason why am sending this mail is to ask for the procedure of how to unlock an

Hi
my name is Al-Ameen, Am from Nigeria,actually my brother from the united kingdom sent me an iphone5, So when i insert my Sim card i discovered the iPhone is locked.
So the reason why am sending this mail is to ask for the procedure of how to unlock an iPhone from another country the amount paid and all the other information about unlocking an iPhone.
Hope to hear back from you guys.
Many Thanks
Al-Ameen.

You need to contact the carrier to see if they offer unlocking and if you qualify. You may need to talk to your brother about this.

Where can I find the reason why a process was suspended?

Hi everyone,
where can I find the reason why a BPM process was suspended a in CE 7.11 system?
In "Manage Processes: Process Instances" is see it is suspended, but the history and data objects are fine, so I see no reason why it might get suspended. I assume some problems within a Mapping Activity, e.g. a Bunsiness Rules call does not work, or there is a data mapping problem. For further troubleshooting, I need more information...
BTW, I read
[SAP Help: Process Troubleshooting|http://help.sap.com/saphelp_nwce711/helpdata/en/c9/8bbe067ee343258b8dd83fee859092/content.htm] but it did not help me. The Process Server Log does not work, see [my SDN forum thread|"Process Troubleshooting: Process Server Log" does not do anything?!; so I can't look up there.
Thanks, Georg

hi,
see the NWA Log.
log in in <server>:<port>/nwa
*Problem managment>log and Trace>Log Viewer-->select Last 24 hours.
surely you are having an error in a automate task.
Thanks
Rodrigo
Edited by: Rodrigo Alejandro Pertierra on Apr 29, 2009 5:33 PM

TS1398 What would be the reason why when i try to connect my iphone to a wifi server; it doesn't work? It also doesn't pick up any wifi connections.

What would be the reason why when i try to connect my iphone to a wifi server; it doesn't work? It also doesn't pick up any wifi connections.

go to settings>general> reset network connections and then try again

Found the reason why my Dreamweaver's "Preview in Firefox" wasn't working

Similar Messages

Maybe you are looking for