What are all the reasons why imessages turn into text messages...such as the recipient is talking on the phone, etc.?

what are all the reasons why imessages turn into text messages...such as the recipient is talking on the phone, etc.?

Hi,
What's the worst that I've spent 100 Eur alltogether for GPS map based applications for several sports - golf, bike, ski, etc. These applications use data from iPhone Map application and its disaster after my update onto iOS 6. These are pictures of 2 of my favorit golf resorts:
And here one example from a place where I use to bike:
Very nice, isn't it?
And unfortunately this problem won't disappear even when Google put stand alone map application into iStore.
So I have only way to downgrade to 5.1.1 immediately to not throw away money I already spent.
Ivan

Similar Messages

HT1688 why are my imessages now turning into text messages all the time?

Why are my iMessages now turning into text messages all the time?

There are a number of reasons why they may be sent as regular sms and not iMessages. If either party is in an area with poor reception and the the data network is struggling, the regular sms messages will be sent to the recipient. iMessage can be switched off at a users convienince, your recipients may have iMessage turned off when you've sent those messages.
There are instances where the iMessage server is not responding due to techinical issues (although, few and far between)

What are the reasons why a wideband modem can not take a CPE?

I have an M-CMTS with RFGW1.
I have the following settings:
int c6/1/3
downstream Modular-Cable 1/0/0 rf-channel 16-17 upstream 0-3
int c6/1/4
downstream Modular-Cable 1/0/0 rf-channel 18-19 upstream 0-3
cable fiber-node 9
downstream Modular-Cable 1/0/0 rf-channel 16-19
downstream Cable6/1/3
upstream Cable 6/1 connector 12-15
cable fiber-node 10
downstream Modular-Cable 1/0/0 rf-channel 16-19
downstream Cable6/1/4
upstream Cable 6/1 connector 16-19
interface Wideband-Cable1/0/0:4
load-interval 30
cable bundle 1
cable bonding-group-id 5
cable rf-channel 16 bandwidth-percent 45
cable rf-channel 17 bandwidth-percent 45
cable rf-channel 18 bandwidth-percent 45
cable rf-channel 19 bandwidth-percent 45
the cable modem gets online, but does not take cpe, my question is why?
D2.0 modems do take CPE, but the 3.0 modems do not. I know that may be a problem in the RFGW1 because another time I changed the port and it worked.
but I would like to know the reason why only the wideband modems are not taking cpe.
I'd like to hear from you.
thanks in advance

Hi Diego,
- The first time that was put online, it became as w-online and take CPE (The DHCP assigned IP addresses both, Modem and CPE)- But it did not work, so I reset the modem, and went online again, (but did not have a CPE IP address)
I'm not following you here. In the first point you mentioned that the modem came w-online and the CPE got an IP. However, in the second point, you mentioned that it didn't work and then you reset the modem. What didn't work (I understood the problem was CPE getting IP address which, as you mentioned, was done on the first point)?
You also said that, at some point, the modem was online but not pingable. The CPE didn't get IP that time. In that case, was the modem online or w-online? What was the primary channel for this modem? Take into account that, for wideband, the modem uses the primary channel to register and perform all Docsis operation. Any data traffic (like a ping or a DHCP request from a CPE) will use the secondary channels. If these channels have some issue you may see an issue as the one described.
For the D2.0 modem using Mo1/0/0:16, it could be similar as above. If this channel is OK but the rest have some issues, you could see a behavior like that. The D2.0 modem will use the primary channel (only channel) also for data transfer. Since this channel is OK, the D2.0 modem don't have any issue. However, if a D3.0 modem uses Mo1/0/0:16 as primary it may come online (since the channel is OK) but, if the rest of channels have issues, then you may have problem to pass data traffic.
Did you check if D2.0 modem can use all the channels? You may also want to check the modulation profiles being used. It could be that you are using a lower modulation profile for ranging (initial, station maintenance) and a higher one for data transfer which may be affected by some condition in the network.
Best regards.

Since ios 8, imessages are turning into texts. And the receiving person has an apple device. why?

Since ios 8, imessages on my iphone are turning into texts. and the recipients are using apple devices. Their reply messages come back in a new message, without the history. and often their address is an icloud one and not their phone number (which is where I sent it). Why?

As in the link when you send an iMessage your text bubble is blue. If it's sent SMS your text message is green. Both parties will receive the message or reply in a grey bubble. When you contact them ask them what colour their sent text messages bubble are.
As for group messages check your settings. MMS must be turned on; Settings > Messages. Send as SMS must also be turned on.

In Contacts, I don't have any duplicates, but in iMessage contacts on iMac in Mountain Lion, the contacts it provides for a new message are all doubles. Why and how can I fix? Thx.

In Contacts, I don't have any duplicates, but in iMessage contacts on iMac in Mountain Lion, the contacts it provides for a new message are all doubles. Why and how can I fix?
I also notice that each contact says iCloud in it twice, but when I go to iCloud.com, there are no duplicates either. Help..

mdd770,
Try Contacts>Preferences...>Accounts...remove {-}/re-add {+}your iCloud account.
If that is not successful, follow the steps listed in iCloud: Troubleshooting iCloud Contacts.

Anyone know the reason why app store in iOS 6 is crashing all the time?

Anyone know the reason why app store in iOS 6 is crashing all the time?
Tried everything. Reset my iPod touch to fresh version of iOS 6 and still issues. I believe that there is a bug.
APPLE: please FIX ALL THE BUGS IN IOS 6!!!!!! Please do it fast!!!

I am having the same problem, but I think I might know what's causing it. I just updated my girlfriend's iPhone 4S (same phone as mine) to iOS 6 and was surprised to find that her app store is working just fine. When I opened hers, however, I did notice that the "Categories" and "Top 25" buttons are totally different; and those happen to be the two buttons that are not working for me. Mine shows the same that yours does, while hers has the "Genius" and "Charts" buttons in the place of the two that are not functioning for me. I believe these old buttons are no longer active and therefor are bombing out when attempting to access them.
Now I said I think I may understand the problem, but unfortunately I have no idea what the solution may be. Hopefully this tread doesn't fade away and our problem gets addressed.

Iphotos Package Contents: What are all these folders for? Is it too large to back up in the cloud?

Dear experts, I am quite a newbie when it comes to understanding the Mac filing system, as I originally came from the PC world. There's lots of things I dont understand in the iMac file viewer and how to organise and backup my photos is an important issue for me.
I know that if I want to look at the original photo files on my iMac, I can right-click on users/myname/pictures and select "Show Package Contents".
Question 1 - What are all these folders for?
Please can someone explain what is the difference between all the folders I see? Some of them seem to be exact duplicates of the others e.g. Masters, Modified and Originals all seem to have the same content. So here is a list of folders that I see. What is in them?, or what is their purpose?
Data
Data.noindex
Modified
Originals
Apple TV Photo Cache
Attachments
Auto Import
Backup
Caches
Contents
Database
iLifeShared
iPod Photo Cache
Masters
Previews
ProjectCache
Thumbnails
Question 2 - Which photo folder should I back-up?
If I want to keep a physical backup of my photos, which of the above folders should I copy to an external hard drive? (I use Get Backup to automatically copy all important new or changed files to an external drive)
Question 3 - Using the cloud: What is the best way to backup my large photo library in the cloud safely?
I would like to have some kind of safe backup in the cloud for my photos. However the size of the iphoto library is huge at 165GB. Even the Masters folder is huge. It is 130GB. Is it possible to back up files of this size in the cloud? I have a couple of services called photo streaming and Dropbox, but they don't seem to be able to handle this kind of size. Photo streaming only works with 1000 photos (as far as I can tell), and my Dropbox probably has a limit too. I guess it's about 5GB. I am already using about 3GB of my Dropbox space for other files. I would consider both paid and free solutions.
Many thanks to all the experts for your help!

know that if I want to look at the original photo files on my iMac, I can right-click on users/myname/pictures and select "Show Package Contents".
Don't do that. That's like opening the hood of your car and trying to figure out what all the different bits and peices are and which you can yank out and dispose of. Simply, there are no user-serviceable parts in here.
So, your Question 2:
You back up the iPhoto Library as a single unit.
Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store
Your question 3:
There is no good back up to the Cloud. There are a couple of reasons for this. One is that the datasets are so large and the cloud services shapre their download speeds. This means restoring can take days to complete. Then, and this is the big problem, the iPhoto Library needs to sit on a disk formatted Mac OS Extended (Journaled). Bluntly, no servers online are formatted appropriately, and if the Library is written to - by an incremental back up, for instance - there is a very high likelihood that the library will be corrupted.
Your Question 1:
The Library you're describing there sounds like one that has been updated a few times. Not everything you list there is a folder. Some will be aliases.
The Data folders hold thumbnails.
The Masters and Originals folders hold the files as imported from the camera
The Previews hold the versions of the edited photos that are accessed via the Sharing mechanism.
I think if you look losely that you'll notice that one of the Data folders and one of either the Masters or the Originals folders is actually an alias.
Everything else is a database or cache file of some form. All are required for iPhoto to work.
As an FYI:
For help accessing your photos in iPhoto see this user tip:
https://discussions.apple.com/docs/DOC-4491

What, exactly, are 'encoded assets'? Why does removing them resolve problems? How can they be avoided in the first place?

What, exactly, are 'encoded assets'? Why does removing them resolve problems? How can they be avoided in the first place?

As I understand it, encoding fomats your digital video clips and photos (assets) into Standard DVD mp2 format so that it can be burned to a DVD. If there has been an error in the encoding process, then you remove the old encoded assets and start over. There are numberous reasons why there can be errors in the encoding process.

How to identify what are all the errors appears in process chain,

Hi all,
i have a process chain running, but i want to find out what are all the errors that the process chain has thrown
thanks
pooja

Hi Pooja,
Errors in monitoring:
SID error
Reason: If the corresponding master data is missing for the particular transaction data.
         1. Check for the load timing for the respective master data, if it less than an hour then make the request red and repeat the ip.
         2. If the data is loaded to PSA then you have to delete the request from target and manually push the data to from PSA.
         3. If we are required for selective update then note down the info source from header and find it in RSA1,select the one with Single as postfix.
         4. Goto data selection tab and change the range.
Tip: change the last 4 digits for from to 0000and the last 4 digit for to     9999.
        5. Repeat the ip.
         6. In case only of failure in one target goto RSA1 find the PSA, put he request no. and reschedule it.
Note: IF PSA is present never make the request red rather delete it.
Replication error
Reason: Data source replication Failed.
         1. In order to handle this error you should be known to IP, info source and source system.
         2. Goto RSA1, find the data source in the source sys tab.
         3. Right click on the data source and replicate it.
         4. Since all the transformation rules pertaining to this data source need to be reactivated so go to SE38 and execute rs_transtru_activat_all, data source and sys name.
         5. Delete the red request from the target.
Update R not supported
Reason: The corresponding initialization flag for the ip is lost.
         1. Goto header click on the ip and goto schedule tab and click initialize in the source system, whatever screen appears delete the only request present(the initialization flag).
         2. Goto RSA1, find the ip in the info source (one with the Adhoc initialize flag).
         3. Goto update tab and select Initialize delta process try going for with data transfer.
         4. Reschedule the IP.
Duplicate Record Error
Reason: Duplicate error records for the loaded master data.
         1. Goto info package via header or via RSA1.
         2. Goto processing tab and change the ip setting, selecting only PSA and ignore duplicate records and re run the ip.
         3. Do remember to change the ip settings back to the original once after the second step.
ODS activation failure
Reason: Prerequisites for ODs activation not satisfied i.e. unique key.
         1. Goto maintain variant.
         2. Check for the QM status of the requests in the target they should be green.
         3. Then click the ODS activation tab.
         4. In the screen which appears put the requests for which ODS activation failed.
         5. Activate these and keep on refreshing them until status reverts from green,
Remember to refresh these requests one at a time.
         6. If requests are red then delete them from target.
         7. Reschedule the IP.
Note: Never Try activating ODS manually if it is Y1.
Aggregate Rollup error
Reason: No aggregate found for the respective rollup.
         1. Click on the variant in which the error occurred.
         2. Goto chain tab and copy the variant and instance.
         3. Run the nestle provided program YBW05.
         4. Put in info in there and put the status as g green.
         5. Execute and refresh the status.
Lock issue
Reason: The same ip is been locked by other user or may be used by other process chain.
         1. We can see the locked entries and in the transaction SM12.
         2. Wait for the other process to get complete once the ip loads to target in that process then there is no need for running it for the process.
         3. In other case make the request red, when PSA is present then goto environment tab ->schedule->initiate update.
         4. In the box appears select update in the background.
         5. And the manually update the failed IPs by selecting manual update in the context menu.
Alfa confirming value error, Time conversion error, Chain didnt start, Delay due to long running job, Poor system performance,Heirarchy node exist in duplicate.
Reasons:
Alfa confirming error: Data format mismatch.
Time conversion error: Date, time format mismatch.
Chain didnt start: A scheduled chain didnt triggered at the prescribed timing.
-For all the above error we have to raise a ticket.
Idoc or TRFC error
Reason: An Idoc is been stuck somewhere.
         1. Reload the Master Data manually again from Info-package at RSA1.
         2. Release the Idoc.
         3. In the source system level got environment->transaction->Transaction RFC or Data ware housing level.
         4. In the Screen if the status is Transaction Recorded it means its stuck goto edit and click Execute LUW or press F6.
         5. If status is Transaction executing then it means its fine wait.
         6. Or raise ticket.
Error Due to short Dump
Reason: Error due to Short dump could be due to many reasons i.e. memory, table space, lock, error record, page allocation, failed change run.
Process terminated in the Source system.
           Reason: Sometimes we face that a load has failed due to job Termination at Source System.
      This happens due to unavailability of the source system or some connectivity problem between source and target systems.
1.      Make the request red.
2.      Delete the request from the data target.
3.      Reschedule the ip.
4.      If still the job fails raise the ticket.
And also check in following links:
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Common Process chain errors
For Data Load Errors check this blog:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Pls assign points if it helps u,
Thanks & Regards,
Madhu

Dead-code elimination--what are all the rules?

This article http://www-128.ibm.com/developerworks/library/j-jtp12214/ has an entire section on dead-code elimination (DCE).
Does anyone know what all the criteria are by which the hotspot JIT compiler can determine that code is "dead"?
One obvious criteria is if the code will never get executed. I think that the canonical example is code like this:
       static final boolean debug = false;
       static void someMethod() {
               if (debug) {
       }Here, the compiler (javac as well as hotspot's JIT) can determine that someMethod has nothing inside it that could ever get executed, so it can be turned into an empty method.
If you look at that developerworks link above, he gives an even more interesting example for how hotspot's JIT can make sophisticated DCE based on inlining.
What I want to know is what are all the criteria that hotspot can use to decide that code is dead. Code that is never executed is always correct. But can it make more liberal decisions as to what counts as dead code?
Consider this code:
     int[] foo = new int[1000];
     int bar = foo.length;
     // don't use foo again, but do use barA smart compiler could recognize that the array declaration and allocation is actually useless, and simply do
     int bar = 1000;(Thank you Brian for this example.)

What are the rules? Naturally, the only definitive answer can be given can be given by the HotSpot JIT.
That's not a very satifying answer, but it's true. The server JIT, like most compilers, has been taught hundreds and hundreds simplifying transformations that, in part, enable dead code elimination. Enumerating the criteria is a nearly impossible task.
But, your specific example is an interesting case.
int[] foo = new int[1000];
int bar = foo.length;For simplicity, I assume foo and bar are locals to a method, and in this case, the 6.0 HotSpot Server JIT will recognize that foo is unchanged before the initialization of bar, and effectively change it to:
int[] foo = new int[1000];
int bar = 1000;The JIT can't get rid of the allocation of the new array without a more advanced optimization called Escape Analysis, which attempts to determine the dynamic scope of objects. Of course, if these two lines comprise the whole method, then the analysis is fairly trivial.
Any intervening code will make the analysis more complex:
int[] foo = new int[1000];
baz(foo);
int bar = foo.length;
qux(foo);The calls sites will preclude your desired optimization, unless the called methods baz and qux can be inlined and analyzed. The code in baz can neither modify foo nor allow it to escape, and qux can not allow it to escape.
HotSpot's implementation of escape analysis is not quite yet complete, but should be available relatively soon.

I own several iOS devices, and for some reason, everyone get's my text messages on their phone. We turn iMessage on, and select send and receive only at our own respective devices. Why does iMessage automatically turn on?

I own several iOS devices, and for some reason, everyone get's my text messages on their phone. We turn iMessage on, and select send and receive only at our own respective devices. Why does iMessage automatically turn on?

Go to Settings > Messages > Send & Receive on each device and make sure only the phone number for that device is checked.

What are all the tables used for this report:

hi
what are all the tables used for this report:
report:
Stock Report, which will give opening balance, receipt, issue, and closing balance for any given Duration for any material.
thanks in advance

Tables: MSEG, MKPF, MARD.
FOR REFERENCE SEE TRANSACTION : MB5B.
Message was edited by: Sharath kumar R

CUBE - If it is not mandatory, what are all the things to compromise?

If having CUBE in Unified Communications infrastructure is not mandatory, what are all the things that needs to be compromised? I understrand CUBE provides security, interoperability and all.
If we don't have CUBE update installed in VoIP gateway, the coexistence of SIP and TDM trunking will not work? Please help me understanding this.

Thanks Aaron.
So, you saying the calls from VoIP Phone -> CUCM->VoIP Gateway->SP via PSTN->Destination VoIP Gateway->Destination UCM->Phone doesn't require CUBE. In this case, the destination need not to be a SIP enabled device (need not to be a VoIP phone?)?
And for the calls from VoIP Phone->CUCM->VoIP Gateway->SP via SIP->Destination VoIP gateway->CUCM->VoIP Phone (Here destination phone is a SIP enabled device?). Let me know your comments please.

How do we know what are all the fields updated in a screen?

Hi all,
 If i am making modifications in row details of sales order screen .for eg, i am changing the quantity or price for a row
 I want to write log file for the updated fields for that particular sales order.
 How do we know what are all the fields are updated ?
 If we can use SBOTransaction_Notification procedure.How to write code inside that.
 Please provide code example for that.I have downloaded the sample.But i donot know how to use 'Add code to here ' part.
 Please help me to solve this.Hope your reply soon
Regards,
V.Rangarajan

Hi, V.Rangarajan!
When the field in the matrix is filled with some value and the user moves to another field, the et_LOST_FOCUS event occurs. So, i think you can try to handle ItemEvents and use such code (for example):
if (pVal.EventType == SAPbouiCOM.BoEventTypes.et_LOST_FOCUS && pVal.ItemUID == "38" && pVal.BeforeAction == false && pVal.FormType == 139)
string ChangedColumnID = pVal.ColUID;
int ChangedRowNumber = pVal.Row;
and write the values to your log.
"38" - is the matrix ID in the Orders form
"139" - is the Orders form
Also you can access to the value, that user had put into the field.
Hope this helps!

What are all the fields covered in the Raw file received from the Card Co

Hi Experts,
I want to know what are all the fields covered in the Raw file received from the credit card company say AMEX before uploading the data into ASP system i.e. CCD format file to be uploaded in T-Code PRCC
Some of the fields I know:
1.     Name of the Employee
2.     Company ID
3.     Credit card number
4.     Currency
5.     Amount
6.     Exchange rate
7.     Date of Transaction
8.     Description
9.     Document no.
10.     Expense type
11.     Expenses paid by company
Waiting for a positive response from your side
Regards,

Hi
The below mention is the possible values/records will be received from Banks regarding credit card expenses
ORGANIZATION / HIERARCHY HEADER RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY NAME
COMPANY ID
SUB COMPANY ID
EFFECTIVE / FILE DATE
CCF VERSION
COMPANY NUMBER
TRANSACTION POSTING DATE START
TRANSACTION POSTING DATE END
FILLER
TRX CONTROL DATA
ORGANIZATION / HIERARCHY DETAIL RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
CORP PARENT NODE
CORP CHILD NODE
PAST DUE BUCKETS RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
STATEMENT DATE
AMOUNT PAST DUE
30 DAYS PAST DUE
60 DAYS PAST DUE
90 DAYS PAST DUE
120 DAYS PAST DUE
150 DAYS PAST DUE
180 DAYS PAST DUE
180 PLUS DAYS PAST DUE
PREVIOUS BALANCE
FILLER
TRX CONTROL DATA
CARDHOLDER HIERARCHY RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
NODE ID
ACCOUNT NUMBER
FILLER
TRX CONTROL DATA
ACCOUNT HEADER RECORD 1
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
PROCESSOR
ACCOUNT NUMBER
ACCOUNT TYPE
LAST NAME
CARDH FIRST NAME
CARDH MIDDLE NAME
ADDRESS LINE1
ADDRESS LINE2
ADDRESS LINE3
ADDRESS LINE4
ADDRESS LINE5
CITY
STATE / COUNTY/ PROVINCE
POSTAL CODE
COUNTRY
NATIONAL ID
TELEPHONE NUMBER
WORK PHONE NUM
ID VERIFICATION CODE
DATE OF BIRTH
CYCLE CODE
FAX NUMBER
E MAIL ADDRESS
EMPLOYEE ID
CLIENT ID / CUSTOMER NUMBER
CUSTOMER VAT NUMBER
TITLE
STMT DATE
GENDER
FILLER
TRX CONTROL DATA
MAIN TRANSACTION RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
CBS TR RUN DATE
ACCOUNT NUMBER
TRANS DATE
TRANS TIME
POST DATE
FILLER
AUTH REQUIRED
AUTH ID
CONVERS DATE
POS ENTRY
POS COND CODE
ACQUIRER ID
REFERENCE NUM
TRACE NUMBER
FILLER
TRANS ID
MCC
MCC INFO DATA
MERCH ACCEPTOR ID
MERCH DESCRIPTION
MERCHANT CITY
MERCHANT STATE / PROVINCE
MERCHANT POSTAL CODE
MERCH COUNTRY
MERCHANT VAT NUMBER
MERCH DESC FLAG
MERCHANT REFERENCE NUMBER
SOURCE CURRENCY
SOURCE AMOUNT
BILLING CURRENCY
BILLING AMOUNT
SETTLEM CURRENCY
SETTLEM AMOUNT
US DOLLAR CURR
US DOLLAR AMT
GB POUND CURR
GB POUND AMT
EURO CURRENCY
EURO AMOUNT
ASIA YEN CURR
ASIA YEN AMT
SWED KRON CURR
SWED KRON AMT
CANADIAN CURR
CANADIAN AMT
CONVERSION RATE
DB CR FLAG
MEMO FLAG
CORP ACCT NO
SALES TAX
SALES TAX FLAG
VAT TAX
VAT TAX FLAG
PURCHASE ID
PURCH ID FLAG
TRAN TYPE
NO OF ADDENDUMS
VISA_MCI TRAN CODE
ADDENDUM KEY
TICKET NUMBER
MSG TYPE
FILLER
VAT EVIDENCE FLAG
CUSTOMER REFERENCE NUMBER
DISCOUNT AMOUNT
MESSAGE ID
SUMMARY COMMODITY CODE
CUSTOMER VAT NUMBER
FILLER
TRX CONTROL DATA
The above mentioned is Just 50% of data will be received form the banks. Still footer details have to added.
Thanks,
Nandagopal C
Edited by: Nandagopal Chiranjeevi on Feb 6, 2009 5:40 AM

What are all the reasons why imessages turn into text messages...such as the recipient is talking on the phone, etc.?

Similar Messages

Maybe you are looking for