FP-AI-110 out of range error

Hello, I'm new to FieldPoint. I have a problem with FP-AI-110. The voltage I want to measure is 8 volts. I have set the range from -10.4V to 10.4V in MAX explorer for channel configuration. The voltage is verified with DMM and it's about 8 volts. The problem is that sometimes I can get correct reading but sometimes I get the error code 33487 which means out of range. What could be the reason for this? Thanks very much.

In your program, are you reading just one channel or multiple channels? If reading multiple channels and some are not connected to anything, their inputs will 'float' and may go out of range.
-AK2DM
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~

Similar Messages

Attribute out of range error with Dalsa Spyder camera

I have a Dalsa Spyder camera SG-11 which seems to work fine in NI MAX. I've also had this camera working successfully in a LabView vi but now, for some reason, I am getting an error message "Attribute out of range (-1074360302)".
I've tried using different gain values (since MAX sometimes gives an attribute out of range error relating to gain) but am not having much success.
Has anyone else experienced this problem and found a work around?
Lightworker

Hi LightWorker,
I've not seen this probelm specifically with Dalsa Spyder SG-11 cameras but there are several KnowLedge Base Articles on the error for various differnt models of camera. It may be that one of these fixes will apply to your camera as well.
How Do I Resolve "Error: 0xBFF69012 Attribute value is out of range” When Connecting to a GigE Camer...
Why do I get Error 0xBFF69012 "Attribute Value is Out of Range" with my Basler GigE Camera?
Stingray Camera & NI LabView / Vision Builder Error -1074360302 "Attribute is out of range"
Please let us know if any of these solve your issue.
Kind regards,
James W
Controls Systems Engineer
STFC

CRAXDDRT PrintOutEx method throes 'value out of range' error

Hi,
I am using CRAXDDRT.dll for Crystal reports 10 to print a report to a file in afp format.
The following is the scenario:
We have to print out the Tax forms of all the accounts. These forms are printed through an AFP printer. We generate the AFP file and push it to the printer for printing. We create the files each containg10000 accounts. So, we create multiple afp files going in a loop in our code, breaking our files to contain 10000 accounts. For writing the report to a file we use the PrintOutEx method of CRAXDDRT.dll which also takes StartPage number and StopPage numbers as parameters. But when either of the parameters exceeds 32000(int) the method fails with a 'value out of range' error. Do we have any hot fix so that the PrintOutEx method accepts StartPageNum and StopPageNum values more than 32000.
Public crReport As CRAXDDRT.ReportClass
crReport.PrintOutEx(False, piCopiesToPrinter, True, 33000, 38000, sPortName)
Thanks.

CR 10 has been out of patch support since december of 07. See the following for more details:
Business Objects Product Lifecycles [original link is broken]
There is no equivalent API to PrintOutEx in the Crystal Reports SDK for .NET. Thus I understand why you need to use the RDC. However, my suggestion of changing your reference to craxDrt.dll as opposed to craxDDrt.dll still stands due to the two reasons I gave in my previous post (licensing and stability).
I would also consider Don's suggestion re. the 32K limit:
"Only work around I can think of is to limit the number of pages for your print jobs to 32K and then create multiple print jobs to select the same limit. Using Record Selection formula to set the limit, as for the actual page numbers being printed you will likely have to limit them also to 32k, the field may not be able to hold any page numbers higher than 32k."
Finally, another suggestion worth investigating is to see if CR XI release 2 with the latest Service Pack has the same issue. CR XI r2 eval can be downloaded from here:
http://www.businessobjects.com/products/reporting/crystalreports/eval.asp
The latest Service Pack can be downloaded from here:
https://smpdl.sap-ag.de/~sapidp/012002523100013876392008E/crxir2win_sp5.exe
Ludek

Vector Array out of range error

Hiya, I've run into a strange Vector out of range error when trying to splice a Vector array. The idea is to cut off the Vector array after a certain point....
var vec:Vector.<int> = new Vector.<int>();
vec.push(1);
vec.push(2);
vec.push(3);
vec.push(4);
vec.push(5);
vec.splice(3,vec.length); // output RangeError: Error #1125: The index 5 is out of range 5.
The strange thing is that it works perfectly, if I change the Vector to a regular array like:
var vec:Vector.<int> = new Vector.<int>(); to var vec:Array.<int> = new Array();
Any ideas what am i doing wrong ?
Thanks, Martin

I don't know why it don't throw error in Array, but seccond parameter in splice method is deletecount, so you try to delete all elements start from 3 (from element 3 to element 8, but you don't have 8 elements).
vec.splice(3,vec.length - 3);

Repost: Oracle VM Manager (IndexError: list index out of range) error

The Oracle VM Manager software will not import a server side created VM for management purposes. It is giving an index-out-of-range error when trying to retrieve the Memory Size from the jumpbox.xen file (I created a symbolic link to this file called vm.cfg).
Here is the log for the index-out-of-range error:
ovs_root.log
"2008-08-20 02:03:26" INFO=> utl_list_dir: directory('/OVS/running_pool') => pro
jectweb/,infinesse-web/
"2008-08-20 02:03:26" INFO=> list_dir: directory('/OVS/running_pool') => project
web/,infinesse-web/
"2008-08-20 02:03:26" INFO=> utl_get_vm_size: vm('/OVS/running_pool/infinesse-we
b') => 12020
"2008-08-20 02:03:26" INFO=> get_vm_size:vm('/OVS/running_pool/infinesse-web') =
success:size=12020"2008-08-20 02:03:26" ERROR=> xen_get_memory:vm('/OVS/running_pool/infinesse-web
')=><IndexError: list index out of range>
"2008-08-20 02:03:26" INFO=> get_vm_memory: vm('/OVS/running_pool/infinesse-web'
) scope=cfg rs=failed:<IndexError: list index out of range>
and my vm.cfg file:
# -- mode: python; --
# This JumpBox requires Hardware Support otherwise known as Xen's HVM mode.
# To test your Xen installation if it supports this mode, issue the following
# command:
# sudo xm info | grep xen_caps
# it should return a capabilities line like:
# xen_caps : xen-3.0-x86_32 hvm-3.0-x86_32
# as long as there is an hvm entry as shown above it should work.
## If starting Xen fails you may need to set a custom path
## for your kernel or device model files. Uncommant the following
## variables and put in the appropriate paths
## Uncomment and set your custom hvm loader path here
# hvm_path = ""
## Uncomment and set your custom device model loader path here
# devmodel_path = ""
# You will probably want to uncomment the following VNC variables so you
# can see the JumpBox console over VNC. Make sure to set the vncpassword to
# something unique. Also, if you run multiple JumpBoxes on the same host, you
# may want to leave vncdisplay unset and use the domid for the display numbers
#vnc=1 # enable VNC library for graphics, default = 1
#vnclisten="0.0.0.0" # address that should be listened on for the VNC server if vnc is set.
#vncdisplay=1 # set VNC display number, default = domid
#vncconsole=1 # enable spawning vncviewer for domain's console
#vncpasswd='password' # set password for domain's VNC console
memory = '256'
vfb = ['type=vnc,vncunused=1,vnclisten=0.0.0.0']
########### You shouldn't have to edit anything below here ##############
import os
import sys
# Assemble the basepath
file = os.getcwd() + '/' + sys.argv[2]
basepath = os.path.dirname(os.path.abspath(file))
datatarball = basepath + '/disks/data/data.xen.tgz'
builder = "hvm"
hvmfiles = [
'/usr/lib/xen/boot/hvmloader',
'/usr/lib/xen-ioemu-3.0/boot/hvmloader'
devfiles = [
'/usr/lib/xen/bin/qemu-dm',
'/usr/lib/xen-ioemu-3.0/bin/qemu-dm'
# Check to see if the user has assigned custom HVM or device_model paths
try:
hvmfiles.insert(hvm_path,0)
except NameError:
pass
try:
devfiles.insert(devmodel_path,0)
except NameError:
pass
# Choose the appropriate HVM Loader
for i in hvmfiles:
if os.path.exists(i):
kernel = i
break
# Choose the appropriate Device Models
for i in devfiles:
if os.path.exists(i):
device_model = i
break
# Need to test if device_model and kernel are set, if not return with error.
# If this is the first time this has run, extract the data disk tarball
# then remove the tarball
if os.path.exists(datatarball):
os.chdir(basepath + '/disks/data')
os.system("tar -zxpf " + datatarball)
os.remove(datatarball)
# Continue normal configuration
name = "joomla15"
vif = ['type=ioemu, mac=00:16:3E:2B:1F:04, bridge=xenbr0']
disk = ['file:' + basepath + '/disks/root/root.hdd,hda,w','file:' + basepath + '/disks/data/data.xen,hdb,w']
root = "/dev/hda1 ro"
extra = "4"

Hi Ravi,
the error is due to the componet JAVA(TM) 7 which is not supported.
Better to run JAVA 6, I'm running the update 33, you can download it from http://www.oracle.com/technetwork/java/javase/downloads/jre6-downloads-1637595.html
Remeber to remove JAVA &
Go to control panel --> add remove programs and remove JAVA (TM) 7.
It will solve the problem.
Ciao,
Massimo

Oracle ORA-01428: argument is out of range error

Oracle ORA-01428: argument is out of range error

I take it you don't feel like spending the extra money for the EE add-on that was designed to CREATE an INDEX on polygons of logitude,latitude values in such away that a simple
SELECT * FROM ZIP_CODES WHERE SDO_WITHIN_DISTANCE( Z.ZIPCODE_AREA, /* point for zipcode */, 'distance=' || in_distance ) = 'TRUE';
will be very efficient and fast.
primary thing:
you need to drop out the WHEN OTHERS THEN NULL;
also, take advantage of the NO_ROWS_FOUND exception for finding out if a row exists in the database. (instead of doing an IF statement on the results of COUNT(*))
back to your problem
You'll need to investigate which row is causing the problem.
Most likely, it is the zipcode that was the input for the search. I've seen this occur many times on similar trigonometric calculations.
You may have to surround a lot of those trigonometric functions with ROUND( ____, 25) to get it to work.
However, I highly advise you to take a look at what can be done with Oracle Spacial
MK

ActiveWorkbook.Connections(Connection).OLEDBConnection - Subscript out of range error

With ActiveWorkbook.Connections(Connection).OLEDBConnection ' This statement is giving me a script out of range error
' when used inside
the function shown below.
Sub getData(qArray() As String, Connection As String, ActSheet As String)
'Updates the data from the Database. qArray is the SQL query in an array, connection defines which connection to use and ActSheet defines in which sheet to place the data
Sheets(ActSheet).Select
Range("A1").Select
With ActiveWorkbook.Connections(Connection).OLEDBConnection
.CommandText = qArray
.BackgroundQuery = False ' Hvis true opdateres ikke før script er kørt færdig
.CommandType = xlCmdSql
.Connection = "OLEDB;Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=RDWEB;Data Source=dk0149sql.niladv.org;"
.RefreshOnFileOpen = False
.SavePassword = False
.SourceConnectionFile = ""
.SourceDataFile = ""
.ServerCredentialsMethod = xlCredentialsMethodIntegrated
.AlwaysUseConnectionFile = False
End With
ActiveWorkbook.Connections(Connection).Refresh
End Sub
I am getting a subscript out of range when I use the above statement inside the getData function shown below.
The data is getting into the qArray as seen the Locals Window after it errors
How do I eliminate this error?

It seems that Connection has some bad value. Have you investigated what that may be?
The code looks puzzling to me - it never seems to be running the query. Then again, this is a forum for SQL Server, and not for programming Excel. And it's probably in a forum of the latter type should have posted your question.
Erland Sommarskog, SQL Server MVP, [email protected]

Blackberry - ref member out or range' error.

Hi everyone,
I'm porting my app to Blackberry and up until last week everything was working perfectly.
In the last week I've probably made a few hundred changes and now my app won't run on the device, it gives a 'ref member out or range' error for a specific class.
it seems there are a few others out there with the same error but there is no solution posted. It seems to compile fine and installs on the phone but when deleting the app it deletes much quicker than a working app.
Anyone have this problem before?
DAN

It would be good to provide the stacktrace, it's the fastest way to identify at which line your program failed at. I believe calvino_ind has somehow answered you though.
Just FYI, you don't have to do 'String str2 = new String("ay");'. The statement creates a new String instance every time it is executed. Number of instances can be created needlessly, if it happens to be in a loop, for instance.
Instead, do this:
String str2 = "ay";
yc

Submit:Validating members::Subscript Out of Range Error

Hi,
When I enter data in an Input Schedule and click "Send and Refresh Schedule" button, I receive an error message.
Submitted Records : 4
Accepted Records : 0
Rejected Records : 0
Submit:Validating members::Subscript out of Range Submit:Validating members::Subscript out of Range Submit:Validating members::Subscript out of Range Submit:Validating members::Subscript out of Range
"Then the list of records not sent."
No records are sent to the database.
Why does this error occur?

Hi Karthik, Just wondering if there are too many digits(i mean too many decimals in the numbers) in the sheet.
regards
shyam

Numeric Value Out Of Range Error in Callable Statement

I keep getting an error whenever I try and pass in a value greater than 9000 into my stored procedure. The procedure call looks like this:
sSelect = "execute sp_storedproc ?, ?, ?, ?, ?, ?, ?";
CallableStatement call = objConn.prepareCall(sSelect);
call.setString(1, "TEST"); //DB TYPE = VARCHAR
call.setInt(2, 4); // DB TYPE = INTEGER
//*******************PROBLEM LINE***************************
call.setFloat(3,(float) 9001); //DB TYPE = MONEY
call.setInt(4, 25 ); // DB TYPE = INTEGER
call.setFloat(5,(float) 0); // DB TYPE = MONEY
// output parameters
call.setDouble(6, 0);
call.setDouble(7, 0);
call.registerOutParameter(6, Types.DOUBLE);
call.registerOutParameter(7, Types.DOUBLE);
// execute stored procedure
call.execute();
// retrieve value
val1= call.getDouble(6);
val2= call.getDouble(7);
I keep getting a "[Microsoft][ODBC SQL Server Driver]Numeric value out of range." error.
I'm using MS SQL server 2000. The error only occurs when I pass in values > 9000. Since there's no direct mapping between java data types and SQL MONEY data type, I've tried passing every possible type into the procedure with the same result (e.g. float, long, double, int, BigDecimal). If anyone has come across this problem and knows a solution please help!!
Thanks.

knows a solution please help!!Modify the stored proc so it takes a varchar. In the stored proc convert the string to the correct type. In java use setString() to pass in the value.

[CS3 JS] Wierd pageHeight out of range error

The following script fails with the message that pageHeight is out of range.
with(app.documents[0].documentPreferences){
pageHeight = "20mm";
pageWidth = "32mm";
I can manually resize the document to 20mm height without error.
Also, the script runs if I change pageHeight to a value over 26mm.
There doesn't seem to anthing on the document that should prevent it from resizing.
Does anyone have any clue as to why this is happening? And how do I get around it.
Thanks

Margin settings are generally the cause of a page redim failure.
Here's a script to find exactly the width/height limits in a your configuration:
(Save your document before running!)
var dp = app.documents[0].documentPreferences;
var h = 900;
var w = 900;
var hMin=null;
var wMin = null;
try{
    while(h>0)
        dp.pageHeight = h + "pt";
        h--;
catch(ex)
    hMin = h;
try{
    while(w>0)
        dp.pageWidth = w + "pt";
        w--;
catch(ex)
    wMin = w;
var msg = "Min. Height: " + hMin + " pt";
msg += "\nMin. Width: " + wMin + " pt";
alert(msg);

Array index out of range error in PCR!

Hi All,
I am trying to test the PCR forms in MSS in portal.
When I click the "Edit Form" button in step 2, I am getting the following error.
"java.lang.ArrayIndexOutOfBoundsException: Array index out of range: -1"
I tried all the forms(Change Emp Group/SubGroup, Change Emp Sub Area,...).
I am getting the same error.
What could be the reason for this error?
How do I resolve it?
Thanks
Sundar

Hi Siva,
I am getting below error code.
It looks like what you said.
java.lang.ArrayIndexOutOfBoundsException
     at com.sap.mw.jco.JCO$MetaData.getType(JCO.java:10210)
     at com.sap.aii.proxy.framework.core.JcoBaseTypeData.setElementValue(JcoBaseTypeData.java:828)
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClass.setAttributeValueAsBoolean(DynamicRFCModelClass.java:527)
     at com.sap.pcui_gp.isr.isrprocessevent.model.Isr_Get_Form_Url_Input.setI_Append_Cache_Info(Isr_Get_Form_Url_Input.java:162)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callRFCIsrGetFormUrl(FcISRProcessEvent.java:1029)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.setTemplateSource(FcISRProcessEvent.java:459)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callRFCIsrProcessEvent(FcISRProcessEvent.java:798)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callIsrProcessEvent(FcISRProcessEvent.java:380)
Thanks
Sundar

EDL conform yields frame index out of range errors

I'm trying to do an offline/online workflow with Phantom (.cine) files.
I used SpeedGrade CC 2014 to create ProRes proxy files from the original .cine files. That part went well. So, I do my edit with those proxies and export an EDL from my NLE. Everything in the EDL looks normal - it's a really simple cuts-only timeline with just a few clips in it.
I want to conform the EDL in SpeedGrade but relink against the original .cine media. I made sure my edit settings in SpeedGrade match my footage and NLE project settings (23.976 fps). I open the EDL in SpeedGrade and I can see the unlinked clips. I load the .cine files to a desktop in SpeedGrade and then hit the Load from desktop button. SpeedGrade gives me an error about the frame rates of the reels not matching the current frame rate. It lets me proceed and it appears to have linked the correct clips. However, when I view them in the timeline, it displays a "Frame index out of range" screen.
I can see in the timeline that the handles are crazy huge. I can also see that it has applied different time warps to the clips in the EDL, although no TW was done in the edit. Grrr. This should be a pretty simple task but I can't get it to work correctly.
How can I fix this?
Thanks,
Matt

OK, I think I have something working. It's manual/laborious but it appears to work with my short test.
It's something wrong with the "From reel frame" property on the clips that come in from the EDL. I'm reading this as a offset problem. Here's what I've done to fix it.
Set SG to work in frames instead of TC. Easier to see what is going on, imho.
Open the EDL in SG. Conform it and just ignore the mismatched frame rate error. Meh.
Select the first clip in the conformed timeline and switch to the Clip tab. Then, look at the properties page for the clip. Note the "From reel frame" value.
Switch back to your NLE that the EDL was generated from and find that first clip on the timeline. Make sure your NLE is also in frame counting mode rather than TC. Match source into the clip on the in point.
Look at the frame number the playhead is parked on in the source clip. Copy that frame number.
Back in SG, paste that frame number into the "From reel frame" value and click somewhere on the interface.
SG should now slip the clip and show it instead of the annoying Frame index out of range page I've grown to loathe.
Rinse and repeat for each clip. (I said it was laborious!). :-(
So far, so good for me using this method. Again, this works for me and my particular use case (Phantom .cine files). I've accumulated a total of maybe four hours of SpeedGrade experience as I've only ventured to use it for this use case so I'm probably missing something but this is the only way that is working for me.
Now, here's to hoping the Add Handles button works the way I expect it to in the Render tab. I'm not hopeful.
-Matt

"Parameter Index out of range" Error in the report

Hi..
I am geting this error when running the reports..
I am not sure what this means. Is this something related to BI Publisher report/configuration?
I tried exporting XML data and it gives me the same error..
JZ0SB: Parameter index out of range: 3.
Any ideas?

ink86 wrote:
I have an sql String :
select * from queue Where dayofmonth IN ('?', '*') and month IN ('?', '*') and year IN ('?', '*')
This only works when I hard code the values in the sql:
select * from queue Where dayofmonth IN ('8', '*') and month IN ('10', '*') and year IN ('2007', '*')
Why is that?
MBecause you have quoted the question marks. Remove them. PreparedStatement takes care about them itself.
Also see the PreparedStatement tutorial: http://java.sun.com/docs/books/tutorial/jdbc/basics/prepared.html
Using varchars for numbers instead of integers is also not a good practice.

Fixing an array index's out of range error

Hi,
Am stuck in an eLearning project that I am working on and need some help fixing a 2007 error that seems to point to an index for an array being out of range.
Here is the previous posting where there are more details: http://forums.adobe.com/message/4685789#4685789
With much help (thank you once again kglad), the script looks like:
var index:int = 0;
var numToDisplay:int = 10;
var groupA:Array = ["1","2","3"]
var groupB:Array = ["4","5","6"]
var groupC:Array = ["7","8","9"]
var word_array:Array = [];
var i:int;
for(i=0;i<3;i++){
word_array.push(groupA[groupA.length*Math.random()]);
for(i=0;i<3;i++){
word_array.push(groupB[groupB.length*Math.random()]);
for(i=0;i<3;i++){
word_array.push(groupC[groupC.length*Math.random()]);
This is used in another part of the script:
function randomWord() {
    if(index<numToDisplay){
        wordT.text=word_array[index++];
        t.reset();
        t.start();
    } else {
wordT.text= "";
    // display score
The error message (2007) points to:
wordT.text=word_array[index++];
When I trace (word_array) I get
Out of range index for this array?
How can I fix this out of range index?
Any help appreciated.

Since there appear to be only 9 elements getting added to the array, and your numDisplay is set to be 10, your condition ( if(index<numToDisplay){ ) allows index++ to get to 10, which will be out of range for your array. See if changing the value of numDisplay to 9 solves the problem.

FP-AI-110 out of range error

Similar Messages

Maybe you are looking for