Group membership for users is not reflected at the client until full reboot

Ok, so I am new to this:
So I created two groups on the server g1 and g2. Created two server users u1 and u1. I have one client with three accounts: System Admin, u1 and u1.
On the server:
g1 has one member u1
g2 has one member u2
When I swap the membership on the server using Server pref. or Workgroup manager, the users on the client still have access to their original group.
I tried logging everyone out of the client. I does not work.
The only way is to reboot the client completely. However, sometimes when I change the membership it does get reflected on the client. Any ideas?
Equipment:
One (1) Mac Mini Server 10.6.3, clean install. (defaults to OD)
One (1) MacBook Pro 17" , 10.6.4
Is there a way to push?

Answer!
UAC (User Account Control) must be set to OFF to disable this message.
Another error message that really has nothing to do with what's really happening!
Ugh.

Similar Messages

SQL 2014 - Group Membership for sysadmin permissions not working

I am using SQL 2014 on Windows Server 2012 R2 and am running into a permission issue. During the install I specified the local server's Administrators group as well as my specific domain account to have sysadmin privileges.
The issue is that accounts that are a member of the local server's administrators group can't even login to SQL Server Management Studio unless they are specifically granted permissions for their account (my domain account works fine as it has a specific
credential in SQL).
The log just gives the following error:
Login failed for user 'domainname\username'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: <local machine>]
Error: 18456, Severity: 14, State: 11.
I haven't had this issue in previous versions. Is there something that must be done differently in 2014 to grant permissions to groups?

Hi, something like
this?
Bye
Questo post è fornito "così com'è". Non conferisce garanzie o diritti di alcun tipo. Ricorda di usare la funzione "segna come risposta" per i post che ti hanno aiutato a risolvere il problema e "deseleziona come risposta"
quando le risposte segnate non sono effettivamente utili. Questo è particolarmente utile per altri utenti che leggono il thread, alla ricerca di soluzioni a problemi similari. ENG: This posting is provided "AS IS" with no warranties, and confers
no rights. Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

New Group Membership for users

Hello All,
Is there a way to add members based on their employee type to a new group without writing a program??
For ex: if employee type is Part-Time, then add to a Part-time group in OIM.
We need to do this for new users and also for existing users.
We have the code to do this task, but I want to make sure if we can do it via configuration in OIM admin console or design console.
Thanks u ll in advance.
Regards,
~VSN

If this is just OIM Groups we are talking about then why reach up to the Access Policies
- Create membership rules via Design Console -> Rule Designer as follows:
- Name=Sample Membership, Type=General, Description=Sample
Role == Part-Time
- Go to your group in OIM and add this to Membership Rules drop-down
For existing users, do it though a scheduler and use the same Java code which you have currently in place

The attributes for user could not be determined --

Hi,
Our is extended classic scenario:srm5.0 & ECC6.0
we are getting the following error in the org plan:
"The attributes for user could not be determined "
The error is occuring , when we log into the web browser.
we also have a error in the org plan, under the user at the check tab,"No attribute found for scenario BBP".
when we run the BBP_ATTR_CHECK & BBP_BP_OM_Integrate, we have no errors...
Thanks in advance,
RK.

Hi All,
Thanks for your support...
I check the T-code:BBP_ATTR_CHECK & BBP_BP_OM_INTEGRATE.
I also checked the attributes for the CP are ok,still i had the error appearing in the WEB.
The solution:
The CP has been deleted from the org plan.
Once again,we generated the users from USERS_GEN and assign CP to the org plan again at the same.Now the Attributes error is gone.... and the issue is resolved.
Thanks and Regards,
RK.

How to see the group membership for a user in oidadmin

how to see the group membership for a user in oidadmin?
I see the memberships in oiddas, but I would like to know if its possible to see them in oidadmin? Thanks.

Hi,
For what I understand, you know the user and want to know the groups that the user is member of (am i wrong?)...
With this query you pass the user's DN to the ldapsearch and the search gives you back the list of groups the member is a member of, all you need to do is change the value "uniquemember=cn=orcladmin" in the query for your own user.
For example:
$ORACLE_HOME/bin/ldapsearch -h localhost -p 389 -D "cn=orcladmin" -w oracle10g -b "dc=acme,dc=com,dc=au" -s sub "uniquemember=cn=orcladmin" dn
will give you the list of groups that the user "cn=orcladmin" is a member of.
$ORACLE_HOME/bin/ldapsearch -h localhost -p 389 -D "cn=orcladmin" -w oracle10g -b "dc=acme,dc=com,dc=au" -s sub "uniquemember=cn=smithj,cn=Users,dc=acme,dc=com,dc=au" dn
will grive you all the groups that the user smithj is a member of.
if you don't want to get the DN of the group you can change the last parameter of the query like this
$ORACLE_HOME/bin/ldapsearch -h localhost -p 389 -D "cn=orcladmin" -w oracle10g -b "dc=acme,dc=com,dc=au" -s sub "uniquemember=cn=smithj,cn=Users,dc=acme,dc=com,dc=au" cn
will give you the CN of the groups the user is member of.
let me know if this is what you need.
Regards,
Juan

Configuring group policy for user profiles in Windows Server 2012 R2 Domain

Requesting some experts advise on configuring group policy for user profiles.
We will be building new Windows Server 2012 R2 Domain Controllers (Domain of 400 users).
The settings which I am concerned:
1. Folder Redirection: Desktop, Documents, Favorites.
2. Quota for Folder Redirection - 1 GB per user.
3. Map a networked drive - 1 GB per user.
4. Roaming profile - (Will ignore if it does not suit our requirement).
The question is how outlook profile will be retained / automatically moved if the users move from once computer to other?
FYI, E-mails hosted on MS Office365 and OST file size of few users more than 25GB. So, in case the user moves from one computer to other, the entire mailbox will be downloaded via internet. This consumes high bandwidth if more than 3-4 users shift per day.
Thanks a lot for your valuable time and efforts.

Hi,
>>The question is how outlook profile will be retained / automatically moved if the users move from once computer to other?
This depends on where our outlook data files are stored. If these data files are stored under
drive:\Users\<username>\AppData\Local, then these files can’t be redirected, for folder redirection can’t redirect appdata local or locallow.
However, regarding your question, we can refer to the following thread to find the solution.
Roam outlook profiles without roaming profiles
http://social.technet.microsoft.com/Forums/office/en-US/3908b8e0-8f44-4a34-8eb5-5a024df3463e/roam-outlook-profiles-without-roaming-profiles
In addition, regarding how to configure folder redirection, the following article can be referred to for more information.
Configuring Folder Redirection
http://technet.microsoft.com/library/cc786749.aspx
Hope it helps.
Best regards,
Frank Shen

E Recruitment -Candidate applied for job but not reflected candidate name

E Recruitment
Candidate applied for job but not reflected candidate name Recruiter Dashboard
Please any one suggests me what is problem?
Regards
Eshwar

Hello Sri,
the solution to your first question might be very easy. In EhP 4 the entries in the dashboard do not appear automatically. In most cases you have to refresh the dashboard (be aware this is only effecting the current dashboard work list, not all if you do not use the refresh all button). Soclick the "My new Applications" and then refress this workset.
If this does not help we will have to look closer into this issue (overall I assume you have EhP4 SP 6 applied).
For question 2. It is a quite common requirement that an external publication is nearly only based on the posting texts while the internal publication includes much more specific information (org. management, cost center, pay scale group). As you are free in designing you own company specific internal and external publications they can look however you want (in the general restriction what a smartform can do of course). For different publication texts companies create different postings one for internal and one for external publication. The additional information are in some cases entered directly into these texts, in some cases maintained in e-rec fields not needed for other requirements, in customer own fields or directly gathered from the HR core system. It depends a bit on the exact requirement which is the best solution. For the fields you mentioned I'd probably go for OM integration for e-rec (assigning positions to requisition) and get the Information via customer RFC function module directly in the smartform (if the security guys allow the access to the HR system from the e-rec system).
For question 3. The manager should be able to see the decision maker data overview. Here you can include whatever you want as you can replace it with a customer developed smartform.
Kind Regards
Roman

Error - The attributes for user could not be determined

When I login as a Buyer (with role ZTSX_EC_BBP_PURCHASER - copy of SAP_EC_BBP_PURCHASER), I get the foll. error while trying to Process Purchase Orders:
The attributes for user could not be determined
It does not happen on other transactions (like Sourcing or Issue POs).
The buyer is in the org. plan and I have checked the attributes and they seem ok.
What could be the issue ???
Thanks
-Bakulesh

Hi
<b>Please go through these links -></b>
The attributes for user could not be determined --
'Error in writing attributes' when using function tab
Company code for system missing in user attributes
BBP_POC not working in SRM 5.0
Re: urgent: regarding ATTRIBUTES
Regards
- Atul

The logo for the application has been changed in Azure portal, but it's not reflected during the login

Hi Azure support,
my name is Linda, Office365 technical support. I want to ask one Azure question on behalf on my customer. she has AAD_basic subscription.
she tried to change logo of one application, but failed. she followed the steps as below:
1. add the "Logo" in the application;
2. logo not reflect in the login page.
I cannot attach the screenshot, if you want, you could email me v-linsha
hope you could give some suggestion and resolution. thank you.

Sometimes I know I haven't changed anything in the external file. In this case, the supposed conflict seems to be a bug and I overwrite with Lightroom metadata without exception (but with fingers crossed) - that bug has been reported.
Other times however, I have edited the file in an external editor, and its possible that the external editor wants to add some information that may be worth having, or it may be that its lost the original information - this is when its a dilemma:
If I overwrite disk file with Lightroom metadata, I may be losing what the external editor added.
If I overwrite Lightroom metadata with disk data, I may be losing what Lightroom had and the external editor dropped.
This scenario has not been reported as a bug, since I don't know if it is one. If I could see the difference between the two, then I'd know.
Rob

The Work phone number which I deleted is not reflected in Lync Client.

Hello All,
The Work phone number which I deleted is not reflected in Lync Client. It's been more than 48 hours since I deleted the work phone number in AD. But still the same number listed in the lync contact card. Client policy has been set to 'File download
only' and Lync client Galcontacts.db has the present date so no issues in downloading the address book file.
I did the following but the issue is same.
>> Forced the address book by shell commands in Lync server to get the new full file generated but no luck after.
>> Added 'GalDownloadInitialDelay' reg key but still issue persists.
>> Deleted all suggested contacts, frequent contacts from outlook contacts and also deleted the 'ContactStateCacheU' registry key but no luck.
Please let me know if anyone has this issue fixed.
Much thanks.

Hi,
So the user is EV enabled and has a LineURI. Is that LineURI number the same number that you removed from AD? For example:
1. I removed (555) 555-1212 from my Work Number AD field for John Doe
2. John Doe has a LineURI of tel:+15555551212
If so, that is expected. LineURIs are also taken into consideration when building a user's contact card. If you do not want this number to show up in the GAL, you will need to look at a
private line for that user.
Please “Vote As Helpful” and/or “Mark As Answer” if this post helped you. Thanks!
Adam Curry, UC Consultant, Unify Square Inc. (Blog,
Twitter)
Looking for Lync Users Groups in your area? Check out
Lync Users Group

PO changes not reflecting in the SAP R/3 system in Extended classsic

Hi Guys,
I have a querry regards to deletion of a PO line item in Extended classic scenario Version 5.0. User has deleted the line item in the shopping cart and now the status of the shopping cart is with Zero value and line item deleted, but in the PO there is a line item with some Value and we are trying to delete it and save it, it gets deleted and PO status it shows as awaiting approval. but at the Item level of the PO the check box of Item deletion is updated. which means PO line item is deleted.
Now my querry is the status of the PO in the SRM shows a awaiting approval and this is not in approval tab but at the header level when I try to search the PO with PO display/change option. Also its not reflecting with the deleted item in R/3 system.
Please help me.
Regards
Srujank

Hi
Check configuration of your Message server. check if your message server is configured properly. Just go to your SAP logon. Select the system say "DEV" and click on groups.Then Click on System id and enter the id as "ID1" in your case.
and then enter the machine name in the message server box and then click on generate list. If your message server is configured correctly you would get some groups in the list below. only if that comes then go to SLD and check in the ABap technical system if you have configured technical system using the proper logon groups.
Then you should not face this problem. Let me know if you require more information.
regards
ravi

Logon failure; the user has not been granted the requested logon type at this computer (IE App)

Hello,
Question of a newbie:
In Windows Server 2012 I'm using IE10 to simulate numerous different users. But for some of these "fake" users I got the error:
Logon failure; the user has not been granted the requested logon type at this computer.
So I opened PowerShell : GPEDIT.MSC
Computer Configuration / Windows Settings / Security Settings / Local Policies / User Rights Assignment.
In the detail zone : Double-Clic sur Allow log on locally.
Dialog box : Allow log on locally properties
But the Add User or Group
button is grayed out!
What can I do?
Thanks for your help!

Several months after...
I found the solution : the user has to be member of the Server
Operators in Active Directory.
That's all :)
Thanks

UI Screen Configs not reflecting on the web

For doing screen configuration, when I click on the frame to configure, the system is picking up std key and not the custom key zpartman though zpartman key is there in the list. ( Note: Zpartman key is the one assigned to this role ). Therefore if I do config in zpartman key, it's not reflecting on the web. Please reply what could be the reason and the solution.
Thanks
TR

Hi TR
first access the standard and check the configuration info such as what is the configuration key , object and subobject .
Then access your custom configuration screen and check what it was looking for and what is it picked , change your custom configuration accordingly what it was looking for (by making changes to configuration key, object and sub object).
Check that you are accessing in the same client if not transport the request to other client using SCC1 transaction.
Thanks & Regards
Raj

Check Box values not reflecting in the pageflow instace variable

Hello BEA Experts,
I am binding a checkBox group to an instance variable of a Pageflow , it seems that the array inside the pageflow is null no matter what can you please let me know why.
Is it possible to bind the checkbox group tag to an array in Pageflow or is there anything wrong with the way I am using the checkbox group with in a data- repeater table.
Here are the code snippets..
JSP:
<netui-data:repeaterItem>
<tr class="tablebody">
<td>
<netui:checkBoxGroup dataSource="{pageFlow.nodeIds}">
<netui:checkBoxOption value="{container.item.nodeId}">&nbsp
</netui:checkBoxOption>
</netui:checkBoxGroup>
Contoller:
Has a private instance varible named nodeIds with getter and setter methods..
Please let me know why the checked values are not reflecting in the pageFlow attribute.

Hi Bob
I didn't understand fully what you are trying here. Could you please clarify?
I assume that you have a Array of NodeId objects.
Lets say:
Public NodeId[] nodeids = new NodeIds[10];
and you want a checkBoxGroup mapped to NodeId[]
and have as many checkBoxOption as number of elements in array with value as NodeId(i).nodeId
Is this assumption correct?
If the above is correct then the code snippet you have pasted is wrong in the sense that checkBoxGroup datasource is the array but the Option value is the main repeater item's nodeId which is wrong.
The container.item would not access anything within the pageflow variable.
I will post a sample in the next one
Vimala-

The home folder for user isn't located in the usual place......

....or can't be accessed.
Ok so I have trawled the internet and found this to be a known problem, however mine has an extra twist.
Ok, my Mac has a local admin account, lets call it Admin, but the account I use is a network account called PBN.
This network account does not create a home folder path to the server, as such it stores a user folder in Macintosh HD/Users/.
Since buying this mac this has been working fine, no issues, but today when I log onto the machine it gets the error "The home folder for <user> isn't located in the usual place or can't be accessed", whats more is that its created a new folder labelled "~".
Things I have tried:
1) repair permissions and repair disk while booted into SL DVD
2) Right clicking while in System Pref - Users to get to advanced options to check the home drive path (Can't do this because its a network account although the profile is stored locally)
3) xattr -d com.apple.FinderInfo / on problematic machine
Couldn't do this on the PBN account as it has no permissions (although it is a domain admin)
attr file no found error the admin account
4) xattr -d com.apple.FinderInfo /volumes/users/ while booted into another machine with broken machine in target disk mode.
So, I am at a major loss and would really preciate any help

The error messages regarding network homes really don't offer any specific clues as to what's wrong. The error message you're getting means one of several things - you've done something wrong setting up your server, you've done something wrong setting up your clients, your server has hardware/software issues, or your network infrastructure is bad. I'm honestly not trying to give you a bad time here, just going over possibilities.
DNS, which you mentioned, is a good place to start. You mentioned that forward/reverse lookups work, and that's a good sign. But just to be sure, have you run sudo changeip -checkhostname
If that reports back that the names match and there is nothing to change, then it's pretty certain that DNS is not the issue. Just to be sure, your clients are using your OS X Server, or whatever server is hosting DNS records for your setup?
The next step is to double-check permissions on the shares where user homes are located. The clients should also have accurate date&time settings.
The logs on the clients and server can also offer clues, however cryptic they may be, be sure to look at them if you haven't.
Also, has this setup worked before, if not, can you describe how you set everything up? I've been stymied by OS X Server myself, so I get where you're at, but the more details you provide, the better chance that Tony, Mr. Hoffman, or other folks here can offer a few more clues/suggestions.
hth
Jeff

Group membership for users is not reflected at the client until full reboot

Similar Messages

Maybe you are looking for