Having issues with loading web pages after using migration assistant

Last week my old macbook pro died and i purchased a new 13" mbp. I brought it home the first day i bought it and just turned it on and started playing with it and the internet was blazing fast, no issues at all. I then brought it back to the apple store where they peformed a migration from my old hdd to my new macbook pro. I then took it back to my dorm and connected to the same exact internet and now i am having problems loading web pages. Sometimes the page will load on the first try (click) and other times it will hang there loading but never fully load the page, and if it does load somewhat certain things are missing from the page. So i have to click the link again, and again, and sometimes again for it to finally load correctly. I dont know what is wrong but i have a feeling it is files from my old system conflicting with new ones when it comes to loading web pages. Everything is up to date the OS and firefox and i am having the same issues in safari. Also my ipad and blackberry have no problem connecting to the wifi so that is not the issue. I really hope someone can help me out because this is really starting to drive me crazy.

If your still having problems, or anyone else......
For future info, your in the wrong forum, your need the MBP area, this is the MacPRO area, no big deal, I can barely keep up with the M & B & P, etc...
Sounds like when it migrated over your old settings it may have gotten corrupted? It has been known to work if you were to just make another "Location" and just re-enter the information again and sometimes that will help. You might take it back to the store and see if it does it on their connection also. The silly person should have tested it first before letting you go.
Hope you got it fixed...

Similar Messages

I have been experiencing connection issues with loading web pages. It's as if the web pages do not want to load all the way and some times not at all. This has happen with all three of my computers with the same browsers.

There are times when web pages do not want to load fully and other times not at all. They just continue to open up with a blank screen. My routers light flash during this process and then they stop as if no connection is being made. I do know for sure it is not my ISP or internet explorer browser.
Thank you,
David [email protected]

I continue to have this problem and have tried all recommendations so far...I notice also when I click on a web site on the taps side of browser once it starts loading however it does not connect, web site comes up just blank while it continues to search. The same thing happens while in an email program with clicking in the email link and page pops up and continues to search for the web site. You have to reload over and over again until it finally locates it and then opens. Should I uninstall the Firefox browser and install again.....?

Has anybody else been having issues with their home button after using assistive touch for a little while?

Me and my brother have been messing with Assistive Touch on and off since iOS 5 canme out. We been noticing that when we actually move to use the home button, sometimes it doesnt respond. Though I'm all for thinking my home button my be on the fritz, it wouldnt explain how mine and my brother suddenly have issues with our home buttons at the same time. Both of us had a time where the home button didnt respond at all. and its been intermittent ever since. Anybody that has an answer or another case like this I' d like some information

Reset Home button steps:
(1) Tap Settings App, when it is open:
(2) Hold Power button until "slide to power off" bar appears.
(3) Don't slide it, release power button.
(4) Gently, continuously press Home button for few seconds until home screen appears.
(5) Done.
If this does not help, further points to Hardware Problem.

I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer w

I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer working and although upload completes, the URL takes you to a "Forbidden - do not have permission to read this file" page. Lightroom is changing the permissions of each file to 000 instead of 644 for index files and 755 for all others. How can I change the permissions settings in Lightroom?

I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer working and although upload completes, the URL takes you to a "Forbidden - do not have permission to read this file" page. Lightroom is changing the permissions of each file to 000 instead of 644 for index files and 755 for all others. How can I change the permissions settings in Lightroom?

I have been having issues with my computer lagging after installing lion.

I have been having issues with my computer lagging after installing lion. Can anyone please help me get the issue resolved? I need it in easy to follow language.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

HT4889 After using migration assistant I have had problems with some apps that were brought down from App store, as well as IntelliJ that just doesnt want to start at all. Does it have anything to do with the UID being changed?

After using migration assistant I have had problems with some apps that were brought down from App store, as well as IntelliJ that just doesnt want to start at all. Does it have anything to do with the UID being changed?
13-07-03 6:24:12.447 PM com.apple.launchd.peruser.502[1632]: ([0x0-0x5be5be].com.jetbrains.intellij[5805]) Job failed to exec(3) for weird reason: 13

What is the exact name of the application you're trying to launch? Is it in the Applications folder?

Lost list of my wifi networks after using migration assistant / time machine

After using migration assistant / time machine to set up my new Mac I now miss the list of stored preferred Wlan/WiFi networks. So the passwords of wireless networks I. Used in the past are all gone.
Why is time machine not putting those on my new Mac as it does with many other settings?
How can I manually grab this list from my old Mac and out it on the new machine?
Will I find that time machine missed some other lists and settings as well?
Thanks for help.

I've been working through this procedure this week. It's pretty good, and when it works it appears to work quite well, but there's still some bumps in the road:
(1) Once you've migrated, Time Machine itself seems to be a little confused and future backups may fail. You might have to start again by changing to a new Time Machine disk on your new laptop. You may lose your older backups, it's not yet clear to me.
(2) You can't restore from a previous backup during the migration, only the most recent one. (You can restore from an older backup using tools on the install CD if you need to.) I suspect this won't be an issue for you.
(3) Migration Assistant once you've logged in a Migration Assistant while you're starting up a new machine seem to work slightly differently. For example, sometimes the newest copy of the applications in your Applications folder (say, iMovie) is preserved, sometimes it makes an exact restore of the old Applications folder even if it's an older version of the application.
Overall it's been a pretty good experience, and what you want to do does work, but be prepared for the possibility of some issues. I tried this back in 10.5.0 a few months ago and had a lot of problems, things seem better now under 10.5.2.
- Ert

After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If th

After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If this is recommended, I would need complete instructions on doing this. I have there serial number for the product.

using migration assistant is problematic.
at this point yes, you should uninstall everything migrated, clean and then reinstall properly using the installation files.
cleaner: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
installation files:
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

Mail not working after using migration assistant - what am I missing?

Mail not working after using migration assistant - what am I missing?

The mailbox list is divided into categories with headings in caps, such as ON MY MAC. When you hover the cursor over one of those headings (except for MAILBOXES), you should see the word Show or Hide on the right. Click Show. The MAILBOXES category can't be hidden.
In each category, the mailboxes are arranged in groups, such as Inbox. To the left of each group is a small disclosure triangle. If the triangle points to the right, click it so that it points down.

After using migration assistant to a new Mac 10.9.5, Outlook failed to open...mssge "Could not rebuild database -18000"

After using migration assistant to my new MacBook Retina 10.9.5, Outlook failed to open...mssge "Could not rebuild database -18000"

See if this previous discussion/link to microsoft support helps
Re: There is a problem with the Outlook database. Your database could not be rebuilt. [-18000]

Issues loading web pages on brand new machi after using migration assistant

ast week my old macbook pro died and i purchased a new 13" mbp. I brought it home the first day i bought it and just turned it on and started playing with it and the internet was blazing fast, no issues at all. I then brought it back to the apple store where they peformed a migration from my old hdd to my new macbook pro. I then took it back to my dorm and connected to the same exact internet and now i am having problems loading web pages. Sometimes the page will load on the first try (click) and other times it will hang there loading but never fully load the page, and if it does load somewhat certain things are missing from the page. So i have to click the link again, and again, and sometimes again for it to finally load correctly. I dont know what is wrong but i have a feeling it is files from my old system conflicting with new ones when it comes to loading web pages. Everything is up to date the OS and firefox and i am having the same issues in safari. Also my ipad and blackberry have no problem connecting to the wifi so that is not the issue. I really hope someone can help me out because this is really starting to drive me crazy.

First place to look is your System Preferences/Network DNS Server Settings ...
If you haven't been provided with any by college IT then use the ones suggested here:
http://www.dnsserverlist.org/

Having issues with loading pages with large web articles..

I'm having issues with pages loading all the way when I read articles off of wikipedia. Mainly from pages that have tons and tons of text, but it doesn't make sense. The browser indicates that the page is loaded all the way, but when I make it half way down the page, everything becomes completely white. Like LITERALLY everything becomes white. This prevents me from reading any further down the page, even though I would force the page to scroll down all the way, that doesn't help one bit.
Does anyone have a solution or a fix to this? I would like to continue reading my web articles, without being interrupted with these white pages/bugs.
Post relates to: HP TouchPad (WiFi)

Try clearing the cache for the web browser. While the browser is open, go up to Web/Preferences and choose "Clear cache".
Also try rebooting the TouchPad via Device Info/Reset Options/Restart.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

I cannot log into user account with old password after using migration assistant.

I used Migration Assistant to move only my Settings and Users from my Power PC (User name RLE 5) to my Mac Pro. Because of what I have read in these forums I did not migrate applications or and files/folders. I will do that manually. After migrating I tried logging in to my user account RLE 5 on my Mac Pro, but it is telling me I am using the wrong password. I used the same password I used on my Power PC, but with no luck. On my Mac Pro I went into System Preferences>Accounts>RLE 5 account and changed the password. I then rebooted and tried again. No luck.
Can somebody help me with this problem?
Thank you.

What you propose would not solve the problem I am having. I must not have been clear about it. So I will elaborate.
I have a Power PC with 10.5.8. The admin user account name is RLE 5. I need a password to log into my root user account on my Power PC.
Then I bought a used Mac Pro with a clean install of 10.7.5 and no password set up yet for my admin user account. The admin user account name is Mac Pro. When I turn on the computer it opens to my admin user account where I have access to everything.
I used Migrations Assistant to move my Settings and Users from my Power PC to my Mac Pro. That seemed to to successfully.
So I now have four users on my Mac Pro: RLE 5 (the admin user from my Power PC with the password), Mac Pro (my admin user which does not require a password), and two guest user accounts.
I turn on my Mac Pro and it opens to my Mac Pro admin user account. I don't need to sign in. No problem.
I log out of Mac Pro. On my screen are the four user accounts. I click on RLE 5 (which was my admin user account on my Power PC that I migrated over to my Mac Pro) to log into that account and it asks me for a password. I type in the password I used for my Power PC. It keeps telling me it is the incorrect password.
I cannot log into my user account RLE 5 on the Mac Pro. I am being told I have the incorrect password. I've gone to System Preferences>Accounts and changed the password. It doesn't make a difference.
Also I cannot log into the Guest User account that migrated from the Power PC to the Mac Pro for the same reason. I have also tried to change the password for that Guest User account also but with no luck.
Another interesting thing has happened. I decided to give my Mac Pro admin user account a password by going to System Preferences>Accounts. But when I do a test to sign into my admin user account Mac Pro it tells me it is the wrong password. Luckily I can reboot the computer and it opens to my Mac Pro user without asking for a password. But if I log out of Mac Pro and try to then sign back in with the password it tells me it is the incorrect password.
Any suggestions would be appreciated.

After Using Migration Assistant Can't Log On With That User Account

I used Migration Assistant to move only my Settings and Users from my Power PC (User name RLE 5) to my Mac Pro. Because of what I have read in these forums I did not migrate applications or and files/folders. I will do that manually. After migrating I tried logging in to my user account RLE 5 on my Mac Pro, but it is telling me I am using the wrong password. I used the same password I used on my Power PC, but with no luck. On my Mac Pro I went into System Preferences>Accounts>RLE 5 account and changed the password. I then rebooted and tried again. No luck.
Can somebody help me with this problem?
Thank you.

Hi jenaS, sorry to hear that you're havig an issue after refresh of the system, if ur logged in using a live account it shouldnt change or remove the pin, if you are usin a local account the issue there might be in the profile on the system it might be corrupted, do you have a screen shot of the issue?
Dont fake the funk............

Updating pages, iTunes after using migration assistant.

I recently used migration assistant as a data transfer, now I no longer have access to the 'stacks' documents, and when I open pages etc. it says I need to update it, even though I had installed them as a new app when I bought my computer... can anyone explain this to me.

Software updates are made available from time to time, and one may have been released for Pages since you bought your computer.

Having issues with loading web pages after using migration assistant

Similar Messages

Maybe you are looking for