Help needed on Multi provider

Hello Experts,
                we have crated an ODS and loaded data from flatfile, now i need to put this ODS in Multi provider, which i did but i dont have any key figures in my ods which is making a problem while activating the Multiprovider , can anyone help me on this.
Thank You,
Jon.

Surendra , an ODS should have a Key field and not necessarily a Key figure however to create a cube / multiprovider , it is a must that you have a key fiugure , which leads me to ask the following questions:
1. Why do you need a multiprovider on an ODS with no facts(key figure)?
2. Why not an Infoset?
If this is for experimentation alone , trhe answer is clear,
A multiprovider cannot be created without a key figure , this goes against the very concepts of Data Warehousing and think if your architecture is correct and why you need a multiprovider and a multiprovider alone will satisfy your requirements.
Arun

Similar Messages

  • Help needed :- Regarding multi prompts usage in FF3.0* with java script

    Hey i used the java script given in link :- http://sranka.wordpress.com/2008/11/09/how-to-replace-multi-go-button-prompt-by-one/#comment-96
    to hide multi-go-button in prompts and it works for IE 7 and firefox 2.0* with 10.3.4.1.
    Now since 10.1.3.4.1 is certified with firefox 3.0* ,when i use this same script in firefox 3.0* for my prompts it doesn’t work .
    Any idea why ? Please help me with this,as i want to use this hide go button feature in firefox 3.0* too.
    Are these scripts browser to browser incompatible ? If yes from where can i get the script for firefox 3.0* ?
    Awaiting for the inputs.
    Thanks,
    Nisha

    Quadruple-posting your issue won't get it resolved quicker. Please stop that. If you feel your thread needs to be on top, bump it by adding a "Any input?" post to it or something. Ome would assume that forums are around long enough for this trick to be known.

  • Help Needed in JMS Provider

    Hi,
       In a document for JMS Connector it is given as we need to register the JMSConnectionFactory using Non-JNDI Provider, if our JMS Provider does not provide a naming system.
    Does WebSphere MQ(non JMS) provides a naming system? If not should i register it using Non-JNDI procedure? When i register, its asking me to fill the Object Factory class and JMS Factory class? I am not able to find out the class implementing the javax.jms.QueueConnectionFactory and javax.naming.spi.objectFactory  interface.
    Please help me out.
    Regards
    Rahul

    Thanks Amol. Right now we are on SP9 and we are facing the error
          Error: javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for '<my_jms_host>:<my_jms_qm>'
    at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:434)
    at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:998)
    at com.ibm.mq.jms.MQConnection.createQMNonXA(MQConnection.java:707)
    at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:206)
    at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:76)
    at com.ibm.mq.jms.MQQueueConnectionFactory.createQueueConnection(MQQueueConnectionFactory.java:143)
    at com.sap.aii.messaging.adapter.ModuleTransport2JMS.init(ModuleTransport2JMS.java:343)
    at com.sap.aii.messaging.adapter.ModuleHandlerImpl.run(ModuleHandlerImpl.java:555)
    at java.lang.Thread.run(Thread.java:479)
    There is a OSS Note(749743) for this error. Its been specified as error occurs in SP5 and solution is we need to upgrade it. But we are facing it with SP9. Thats why i was trying to look into these parameters. If i upgrade it to SP15, will it be solved?

  • Help needed on multi-level photo folders on iPhone

    In trying to figure out how to create sub-folders for photographs on an iPhone, the bottom line seems to be that it's not possible.  You can synce to ONE folder on a PC, and that folder can contain many folders, which will appear on the iPhone, but you can't have sub-sub folders - you can only have two levels, the main folder, and a set of nested folders within it.
    I've read in three or four places that multi-level folders are possible is you use either of two programs, "Aperture" or "Photoshop Elements".
    Question #1 - is this true?  Will they allow me to create sub-folders on my iPhone?
    Question #2 - is there a web page that explains how this is done?
    I've given up on doing this on my own, as it just doesn't work, but maybe there's something else that I allows this to work if you buy one of those two programs?

    Surendra , an ODS should have a Key field and not necessarily a Key figure however to create a cube / multiprovider , it is a must that you have a key fiugure , which leads me to ask the following questions:
    1. Why do you need a multiprovider on an ODS with no facts(key figure)?
    2. Why not an Infoset?
    If this is for experimentation alone , trhe answer is clear,
    A multiprovider cannot be created without a key figure , this goes against the very concepts of Data Warehousing and think if your architecture is correct and why you need a multiprovider and a multiprovider alone will satisfy your requirements.
    Arun

  • Help needed with multi-router network

    My son is home from college.  He needs to connect his laptop and an X-Box.
    I have a WRT54G and a BEFW11S4.  Can the BEFW11S4 be connected wireless to the WRT54G and serve as an access point for his needs?
    The other option is to retire the BEFW11S4 and put the WRT54G in his room.  That would require running my primary PC wireless. 

    Another option would be to get your son a wireless bridge, such as the WET54G, and connect a switch to it, such as the SD205 or SD208.  Your son could then wire his laptop and Xbox to the switch.

  • Which type of setting we need to maintain in query to get Multi Provider data

    HI Friends.
    I created query on top of Multi Provider. Multi Provider created on top of Hybrid provider and Standard cube.
    When i executed the Query on top Multi Provider, i can't see the data of Hybrid Provider through Query.
    In BW side i can see the data on Multi provider.
    Can any one help me.

    Hi,
    First need to understand what is the use of Hybrid Provider in what cases we prefer provider.
    Multiprovider  :can be created based on DSO & Infocube
    Hybrid Provider : Can Be created based on DSO / HybridProviders based on direct access.
    For more Info on Hybrid Provider : Creating HybridProviders - Modeling - SAP Library
    There are no settings to get Hybrid provider data Or Multiprovider data in Bex .
    Even though if we need to do any settings we can do it in SPRO , check once in SPRO tcode related to Bex reporting  settings.
    Regards,
    Seshu.P

  • Help needed asap! Will my IPAD 3G wifi work in another country with the sim of a 3G services provider?

    Help needed asap! I want to buy an IPAD 3G + Wifi before I return to my country from the US. The problem is that I have GSM service providers in my country that provide 3G services but I am wondering if their SIM card would work in the IPAD? In other words, can I get an unlocked IPAD 3G wifi? Thanks for helping out

    The AT&T 3G iPads (which are GSM/sim based) in the US are not locked (the Verizon models are CDMA based so they effectively are). So as long as you can get a sim in your own country you shouldn't have a problem

  • 0FISCPER Value Help is not working on Multi Provider

    Hi Friends,
    I Have created a query on Multi Provider (based two ODS) and when i click on the value help for 0FISCPER while executing the report, it just hangs up and keep running, but never givel any values wvwn after 5 hours (I did not observed for moreathan 5hrs, propably it might go for dump).
    The same Query with same selection varuiable on 0FISCPER gives the value help in just 30 sec in both Dev and QA systems.
    When i try to use the same value help on bothe the ODS, it was working fine in all Dev, QA and Prod environments. But same on Multi Provide is working only in Dev and QA, but not in Prod.
    One diff i sea, is larg amount of data in Prod, in bothe the ODS invloved in this MP.
    Can you guys pls help...how to resolve this. I even try with different possible settings for  MP  through RSDIPROP transaction
    Thanks,
    Venkat

    Hi Akhan,
    It is the same case even...if i run it from RSRT. It just hangup for past 80mts.
    I got some more information,
    When i try to do the same from portal...i have got below Error messages in Dump.
    Caused by: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Jco exception thrown while executing function "BICS_PROV_GET_MEMBERS" against system "SAP_BW"
    Caused by: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: connection closed without message (CM_NO_DATA_RECEIVED)
    Pls do share...if you got any more suggestions.
    Thanks,
    Venkat

  • Creation of Multi Provider, using InfoCubes | Error in assigning dimensions

    Hi All.
    I am tryin to create a multi provider using five Info Cubes,  sat A, B, C, D, E. Now all of them have chars and KF's. some  of them are common.
    I selected the relevant info providers, then in the Identification part, I selected "Select All" for Chars/ Time chars as well as KF's.
    now when I am trying to Activate the Multi Provider, it says  " No Dimension Assigned to InfoObject x, y, z and so. on ".
    its clear that there is problem in assigning dimensions fr chars/kf's.
    So in the Edit Multiprovider screen, I click on Dimensions. Then it prompts me to select "One" InfoProvider.( The options being from A, B, C, D, E) and if i select any one, (say A),the chars/KF's present in A, are getting assigned the dimensions, but the chars/kf's from other Info Cubes arent geting the dimension assigned.
    what to do now? can any one help me out.please
    points will be assigned..:)

    Arun Kumar,
    Things to do to create a multiprovider:
    1. Select your infoproviders
    2. Select the characteristics you need
    3. Select the identification criteria
    4. Select Dimensions and assign characteristics
    Arun Varadarajan
    Message was edited by: Arun Varadarajan

  • Help needed with LMS Reporting Settings

    I am new to Captivate and am working with 5.5 to create a number of large courses.
    The first course, I have split over 5 captivate files as there are a large number of slides in each file.  I have reviewed the Help PDF on Learning Management System, but am struggling to find the correct settings in the Reporting Preferences to suit my needs.
    Course structure:
    File 1     -     less than 100 slides, includes question slides not set as reporting, non score-reporting objects
    File 2     -     less than 100 slides, includes question slides not set as reporting, non score-reporting objects
    File 3     -     more than 100 slides, includes question slides not set as reporting, non score-reporting objects
    File 4     -     more than 100 slides, includes question slides not set as reporting, non score-reporting objects
    File 5     -     less than 100 slides, includes question slides as score-reporting objects and other non score-reporting objects (final quiz to be reported and scored in LMS)
    I envisaged using Slide Views Only in the first 4 files, and then Quiz Results and Slide Views in the last file.
    However, these two choices only seem to allow a maximum of 100 Slides - is this correct?, is there no way around this?
    There is another course in our series with much more slides than this first one so having to split into files of 100 could mean
    up to 12 captivate files in one course.
    I don't know if I now need to re-think the structure of the courses.  Maybe I have completely misunderstood the Quiz Reporting
    and Reporting Scores.
    I need to be able to have the Learner click their way through the course, making it highly-interactive for them but at the same
    time not scoring everything they click, until they reach the final assessment which is 10 questions and scored in %.   
    Another thing, after numerous tests, it seems that if I untick the 'Never Send Resume Data' then the 2nd file does not open.  Leaving
    it ticked will open the 2nd file - but then the progress is not saved if the Learner exits the course before finishing.  Has anyone
    experienced this before?
    I also would like clarification on the Manifest Settings, the 'Identifier' - should I be giving each file a unique number, or does it not
    really matter?  When we purchased 5.5, we did not know that we would need the Multi-SCO Packager, so have tried an alternative
    called Reload Editor timebeing, which we have been using for our testing with collating the files - has anyone used this before?  I have
    tried to download the free trial of elearning suite 2.5 but I am having problems getting it done.        
    Any help would be very much appreciated.
    Thanks

    The number 100 shown in Slide View Completion is the % of the total number of slides, not the number of slides from 1-100.
    Your strategy of breaking the course up into smaller modules like this is a good one.
    But if you have only one of the 5 modules that has scoring, you might be wise to add at least one scored object to each of the other modules (perhaps a button on the first or second slide with a nominal score of 1 point) to give the project at least some kind of a score.  I find that in some LMSs if one module in a course is scored, they expect ALL the others to also have a score as well.  So providing some surreptitious method of giving the user a guaranteed score keeps everything working on an even keel.
    Set Report Status as Pass/Fail and Report to LMS as Percent.  These are the settings I find most reliable.
    When using multi-SCO SCORM packages created with Captivate, whether or not the second file in the sequence of modules opens automatically is something you are supposed to set up in the LMS, not in Captivate.  Look for an option called Auto Continue or similar.  This is supposed to mean that when the user finishes playing each module, the next one will open automatically.
    There are two Identifiers you need to specify in each module.  One is the SCORM course identifier and all modules that belong to the same course should share this same ID.  The other is the SCO ID for each module, and these should all be unique.

  • How to move all the standard and adhoc reports from cube to multi provider

    How to move all the standard and adhoc reports from the basic cube to multi provider?
    i created this multiprovider to do the maintenence on the basic cube. for example the infocube physical partition, line item dimension and compression.
    what we decided to do is move all the Standard and ad-hoc reports from the basic cube to the multiprovider. How to do it? and make a copy of the basic cube and do the maintenence on the cube. please help.
    Thanks in advance sdn experts!

    Hi Les,
    This sounds good and one thing we try to always keep in mind when undertaking such activities is to always minimise the impact to the user and make the process as transparent to them as possible. So lets say you have your multiprovider and copied queries up in Prod, these queries will still pick up the data from the base cube.
    Now you need to make a copy of the base cube for some changes to the cube model, I would suggest that you copy the cube and make your changes on the copied cube itself. Then 9depending on the changes done) you can load data from Original Cube to New Cube. When this is being done, make sure that you change your queries to add a restriction on 0INFORPOV by Original Cube.
    After the load to the new cube is complete you can run reports restricted to each cube to verify the numbers. Then change the 0INFOPROV restriction in the queries to point to the New Cube and disengage the old cube from the multiprovider.
    Hope this helps...

  • Help needed about Nearline storage in BW 3.5.

    Hi Guys,
    Can you please provide me with some documents for implementing Nearline storage scenarios in BW 3.5.
    Thanks,
    Punkuj...

    Hi Punkuj,
    We use Nearline storage to store the data that is never been user or used very rarely.For example we have data for year 1960 in the data targets and now it is 2007.So mostly the management never uses this data or they uses them very rearly.So when we retrive the data from the data targets the DB unnecessarly reads the data every time when a report is generated on those targets.So to avoid this performance issue we store that kind of data in a seperate disk and we access that data using a multi provider when we need that in Report.This data is also known as Dormat data.
    Hope this will help you.
    Thanks and Regards
    SandeepKumar.G

  • Multi provider transport

    Hi all,
    I have a multiprovider on an ods and an Master data Info object.
    ods and info objects are already there in production.
    I have created a query on this multiprovider.
    NOw I need to transport this multiprovider and to production system.
    from Transport Connection in RSA1 I selected the multiprovider and ther i need not to select the ods and Info object naa.
    and my query and multiproviders are saved under local package($tmp).
    I am going to change the package for both multi provider and query and transport it,
    Is it correct procedure or is there any steps need to be followed
    Please help me..
    Sridath

    Hi
    If you have the dependent Info Objects, DSO (You used in MP ) with PRS no need to Transport the Same again, Provided you have not done any changes to the existing IO, DSO.
    You have to change the Package and Transport with all necessary Objects by grouping MP / QUERY/ roles along with Work books.
    Transport Sequence
    Info Objects,
    DSO
    INFO CUBE
    TRANSFORMATIONS
    MP
    INFOSETS
    PROCESS CHAINS
    QUERIES
    Objects need to be transported with respect to their
    dependencies
    InfoProviders will bring in all relevant InfoObjects
    Importing of Global variables is dependant on their reference
    InfoObject being already active
    Queries, workbooks and roles are dependant on InfoProviders
    and InfoObjects being active
    Use the Transport Connection Tool to analyze your objects
    Transport all customer-defined packages (dev classes) before
    transporting objects
    Transport InfoProvider(s) using the "In Data Flow Before" or
    "Only Necessary Objects" grouping option
    Transport all Global Variables with primary package
    assignment
    i.e. ZBW
    Transport BEx objects with appropriate individual package
    assignment
    Transport roles and workbooks together
    /people/balint.almasi/blog/2006/12/11/how-to-create-a-transport-request-save-for-system-copy
    Hope it helps and clear

  • Multi provider

    Hi Experts.
    I have one DSO and one CUBE.only two fields are common in the both DSO and CUBE.now my requirement is i need all the fields from the DSO and some fields from the cube( which fields are not common). what is the best one to use multi provider or Info set.
    If we can achive through Info set how to do it.
    regards..roi
    Edited by: samuroi on Apr 13, 2010 2:17 PM

    Hi
    Check these links:
    http://www.scribd.com/doc/6446225/BI-Data-Modeling-Multi-Providers-and-InfoSets
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2f5aa43f-0c01-0010-a990-9641d3d4eef7
    http://www.sap-img.com/business/steps-for-creating-multi-provider.htm
    Regards
    Chandra Sekhar T

  • Report is not getting data from Remote cube thru Multi Provider

    Hi SAPians
    I ve strucked up with a Problem in The Reconciliation Report in BW3.5
    The Report was built on a Multi Provider, which was created on Basic and Remote Cubes .
    Both cubes have same Data Source and all the Objects were in Active version and found good.
    When I m executing the Report ,I m only getting the data from the Basic cube and no data is coming from Remote Cube.
    I ve checked the char " 0Infoprov " in Multi Provider and It was assigned with the both the cubes.
    What might be the problem
    Please help me in this regard
    Thanks in advance
    Regards
    Arjun

    Hi
    In the Reconciliation multiprovider, include 0INFOPROVIDER = Remote cube.
    If data still not coming, you can be sure connectivity with Source system of the Remote cube is the issue
    Check with basis to solve the connectivity issue.
    Ensure Remote cube is consistent
    Bye

Maybe you are looking for