How can i add search help

hi how can i add search help .
when i am giving a parameter of type BSART it takes the in built search help
but i want only those values to appear in F4 help which have diff values in category but i want only with catogory "F".
thanks in advance
naval bhatt

Hi,
You have a Function module <b>HELP_VALUES_BSART</b>
or
You need to use AT SELECTION-SCREEN ON VALUE-REQUEST FOR <FIELD>.in this one use the Function module F4IF_INT_TABLE_VALUE_REQUEST.
Look at the below linkhttp://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbaac935c111d1829f0000e829fbfe/content.htm
Regards
Sudheer

Similar Messages

How Can I hide search help button in alv ?

Hi Sdn .
I want to hide search help button in my alv ..
My gs_fcat-f4availabl = 'X'. is not active .. but there is search help button .
How Can I hide button .
Regards .
Serkann

donnot pass any values in field catalog for reference field and reference table.
or dont use any standard data element

How can I add search parameter "Partner Function" to the inbox in ICweb?

Hello
I need to add search parameter "Partner Function" to the inbox ICweb search.
Today I can search for My open transaction.
The meaning of "My" in the EM Responsible parameter is that my BP number assign to any transaction in any partner function.
I wont to limit the search to look in a particular partner function. for example: 00000014 Employee responsible.
I mean in hardcode and not as a parameter selection screen.
I know that this functionality exist in CRM5 but i am in CRM4
Thanks
Merav

Hi Darren,
I have implemented this BAdi and when I am trying to activate this it is giving me short dump saying 'SYSTEM_CORE_DUMPED', please help.
During the course of my actions I implemeted this BAdi using transaction SE19, the activated this it is activated correctly, then I did some changes in method 'CUSTOM_HIT_LIST_SORT' but then whenever I try activate either the metod or the implemetation it is gives me a pop up saying 'Work Process restarted, session terminated' and the session terminates. On ERMS web page I see the Rabex error and in ST22 I see the SYSTEM_CORE_DUMPED error with following dump details
Runtime Errors         SYSTEM_CORE_DUMPED
       Occurred on     07/21/2006 at 09:07:51
Process terminated by signal 0.
What happened?
The current ABAP program had to be terminated because the
ABAP processor detected an internal system error.
The current ABAP program "ZCL_IM_TTT_IC_INBOX_BADI_2====CP " had to be
terminated because the ABAP
processor discovered an invalid system state.
Information on where termination occurred
The termination occurred during generation of the ABAP program
"ZCL_IM_TTT_IC_INBOX_BADI_2====CP ".
The point of termination was in line 5 of the ABAP source code of the
(Include) program "CL_CRM_AUI_ENTITY=============CU ".
of the program "CL_CRM_AUI_ENTITY=============CU " (when calling the editor
50).
Source code extract
000010   class CL_CRM_AUI_ENTITY definition
000020     public
000030     inheriting from CL_CRM_BOL_ENTITY
000040     abstract
     >     create public .
000060
000070   " public components of class CL_CRM_AUI_ENTITY
000080   " do not include other source files here!!!
000090   public section.
000100
000110     interfaces IF_CRM_IC_CONTACT .
000120
000130     methods ACCEPT
000140     abstract
000150       importing
000160         !IR_ENTITY type ref to CL_CRM_BOL_ENTITY
Please help.
Regards,
Tarun Goel

WEB-UI - How can we add search criteria "Activity ID" to archive search?

Hi,
When searching for an activity via the WEB-UI (Component BT126S_APPT / View ApptSQ) , it is not possible to search by activity ID (Search criteria is not available). Moreover, activity ID is not shown in the result list .
Is there any way to add the activity ID to the search criteria / result list of the WEB-UI?
Thank you in advance for your assistance.
Melanie

Hi Stephen,
I am faced with the same situation in Territory Management, where in I need to add an additional Search Criteria for the Product Search.
What are the steps one would need to follow in order to do such a custom development.
Any pointers would be helpful.
Thanks and Regards,
Puja.

How can I add popup help messages when I mouse over a button

Hi there,
I haev Acrobat x 10 pro.
I'm new to acrobat and would like to set up a friendly form for people to fill in online. I'd like them to have some interactive help so that for example when they mouse over or click a button, some help text appears. I've played around with adding a text field that is hidden and then adding action items to a button to show it. This works, but my text field is shaded like a normal text field and I'd like it to look different.
Is there a better way to to this popup effect or is there a way t omake the popup look like a popup and not a text field?
All help gratefully received,
Thanks in advance.

I'mnot sure what you mean by shading exactly, but you can set up a text field so that it doesn't have an inset border. An alternative is to use a button to display the text. Buttons are more flexible since you can set a button icon to be anything that can appear on a PDF page (text, images, vector graphics). For a sample, see: https://acrobat.com/#d=aP-2xL45pM57xVkT6d6fSg
Also, if you use a text field, set it's default value to the text you want to display so that the field won't get blanked if the form is reset. You don't have to worry about this when using buttons.

How can I add some help text to a plain text field?

I would like to put the basics in the plain text (formatted text) field and then some details and clarifications in the help text area. Seems like this would be easy and useful.

Thanks for your feedback. I don't think we ever thought of using the help text that way.
Randy

How to Dynamically add Search Criteria in Advance Search Region.

Hi All,
I want to understand how can we add Search Criteria dynamically in the Advance Search Region.
The Requirement is to add 4 additional search criteria for an org_id in a multi org structure. For other business those fields should not be visible.
I did try this with the form personalization but could not Show/hide the additional search criteria programatically for the business as we can only see 4 search criteria at the time of page load and other criteria comes in the drop down list to add which can not be show/hide after page load.
I thought of a solution to add search criterias dynamically for my org through extending controller.
I found the OAAdvanceSearchBean (advance search Region in controller) object for my Advance Search but could you tell me how can I add the Criteria Row in that Advance Search (createWebBean function) and then add the item in criteria Row dynamically.
Also please tell me how we can increase the showed criteria from default 4 to more, setDisplayedCriteriaCount(int) is not allowed and it is not working also.
Thanks.
Regards,
Ashish Bansal

Hi,
As Lars said The "Search Option Set" and the "Search Component Set" offer you quite some flexibility.
You can configure both of these component to customize your search.
Once you did it, you can create a new basic search iview and set these components.
On the other hand, you also customize the layout use to show result of search.
Dont'f forget that you need to configure Trex and create an index.
For instance, I configured the search criteria, the system only asked me some metadatas (created by us,whose value are dependents). Each time that you upload a document you set these attributes.
Then when you want to search, appear a screen with these values
Country :
City:
search field:
Patricio.

Pls help - How can I add a typekit font to muse?

As Muse doesn't come with all typekit fonts already included in the dropdown list of webfonts, I'd like to know how I can add a typekit font to the dropdown menu so I can use it for my website. I have Adobe creative cloud membership.
I've searched the whole of the web and can't find anything about this at all - only about adding one of the existing muse typekit fonts which I already know how to do.
Why doesn't Adobe include all typekit fonts with Muse when you're already a full creative cloud subscriber?

Done!
Date: Thu, 20 Dec 2012 03:13:17 -0700
From: [email protected]
To: [email protected]
Subject: Pls help - How can I add a typekit font to muse?
    Re: Pls help - How can I add a typekit font to muse?
    created by morgan_in_london in Help with using Adobe Muse - View the full discussion
You're very welcome - can I be cheeky and ask for a "correct answer" to be noted? :^D
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4935814#4935814
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4935814#4935814
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4935814#4935814. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Help with using Adobe Muse by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
iWork > Pages
contenant Templates > My Templates
comme il y a un dossier
iWork > Numbers
contenant Templates > My Templates
Depuis le Finder, tapez cmd + f
puis configurez la recherche comme sur cette recopie d'écran.
puis lancez la recherche.
Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
Désolé mais je ne répondrai plus avant demain.
Pour moi il est temps de dormir.
Yvan KOENIG (VALLAURIS, France) mercredi 23 janvier 2011 22:39:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

How to add search help to a field in MARA table

Hi,
According to my requirement,I need to add search help to one of the field in MARA.It is checkbox now and it has to be changed to drop down.
How to do this please help.

hi u can use HELP-REQUEST option at selection screen or VALUE-REQUEST
The addition on Value-REQUEST displays the pushbuttuon for F4 help for the corresponding field.
The value selection is controlled by interactive events.
pradeep

How can we add customize seardh help in standard tables?

Hi,
Gurus,
How can we add / assign customize Search Help to standard tables
as my knowledge this is working fine in SAP 4.60. Where as i was not
allowing us to add a search help to its data element is there any alternate way to add if give me your support.
thank you
shabeer ahmed

hi shabeer ahmed
This one is already posted one, chk it
First in the MARA table the Search Help(MAT1) for matnr is selected and viewed.
In the included search helps tab of MAT1 there is another search help MAT1_A.
For that search help in the included u201Csearch helpu201D tab view is selected .
Inside that there is a search help called MAT1_A_APPEND.
Then in the included search help tab of MAT1_A_APPEND, the customized search helps can be attached.
Regards,
Deva

CLM How to add search-help for extension field(New Company Field) in MA.

Hi all,
Based on demand,I need to extend a new field(Company) in Master Agreement.
But I do not know how to add search-help for this field,just like User Accont page.
Anyone can help me ?thank you very muck.
Regards,
JackyCheng

Hello Jacky,
To combine all the answers above and have a topic-based reply please go through the below steps:
#1. Inactivate the current extension field Company (I see it is actually a String value and this is not what you want to have)
#2. Go to Setup -> System Setup -> Extension Reference Types
Check if you already have a Company reference type
If not, create a new Extension Reference Type for Class Company. Fill in all required information.
#3. Create a new Extension Attribute
Select Data Type: Object Reference
Now you can add the Company type as reference
Regards,
Bogdan Toma

How to add search help for standard field LIKP-TRAID

Hi friends,
How to add search help for standard field LIKP-TRAID ,
refer screen
Program Name SAPMV50A
Screen Number 2108
TrnsIDCode ( LIKP-TRAID ) ..
I need to add a search help, so that i can retrieve data from Ztable.
Thanks.
Abhi

Hi Abhi,
Try using any one option:
Create a Search Help in SE11.
Now Goto SE11 -> Enter Ztable -> Select that field -> Click Search Help and try to assign the created Search help to that field in your Ztable explicitly
OR
Create a Zdata element in SE11.
In Data Element, under Further Characteristics tab, enter Name Parameters of Search Help.
Assign this data element to that field in ur Ztable.
OR
Create a Zdomain and maintain a Value Table or Fixed Values for it.
Assign this domain to that field in ur Ztable.

How to add search help to custom infotype listbox??

Hi All,
How to add search help to custom infotype listbox??
Thanks in advance

Hi Vinay,
We have search help and list box as 2 different options.
At a time we can make a field a list box or a search help.List box is restricted and we can pick values from the defined list whereas in search help we can allow more entries and then validate the value entered later.
Implementing a listbox or search help in infotype is same as that of implementing it in a modulepool .
for search help..we can create a custom search help or check for existing search help in se11
then in the screen on infotype field..assign the search help direcly at the screen painter level..
double click on the field in screen painter -> change mode and then in the space for "search help" enter the search helps name
for list box..in the screen painter ,make sure the field is selected as list box..then in PAI of screen we do a
(Process on value-request..field fieldname module module name)..check syntax and other details...
Using function module vrm_set_value fill the field and populate it as required
Pls check and revert
Regards
Byju

How to add search help to a report.

How to add search help to a report.

Hi
It can use the event AT SELECTION-SCREEN ON VALUE REQUEST:
PARAMETERS: P_FIELD LIKE ....
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FIELD.
* Here it needs to insert the abap code to call the search help,
* for example it can call fm F4IF_FIELD_VALUE_REQUEST
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
       EXPORTING
           TABNAME        = SPACE
            SEARCHHELP = <SEARCH HELP>
            DYNPPROG     = SY-REPID
            DYNPNR          = SY-DYNNR
            DYNPROFIELD = 'P_FIELD'.
Max

How can i add search help

Similar Messages

Maybe you are looking for