How can I delete a list item entry based on date? Nintex workflow?

I have a list with two columns. One of the columns in the list has a training date. I would like to delete entries in the list after the date has passed. How can I do this?
Should I create a Nintex workflow to run everyday? What operation in Nintex would I use to check the date in the list and then delete an entry if the current date has come?

Murugesa,
I have access to SharePoint Designer and also Nintex. Are you suggesting I use SharePoint Designer instead of Nintex? I have not used visual studio much so my knowledge with it is not good.
You can create the simple workflow using visual studio. Drag and drop the IF else activity and Code activity to delete the item.
Inside code activity event, Retrieve your date column value and compare against your logic date. if list column value passed then code activity executes the deletion.
Option 2:
If you have SPD design permission on your site,you can simply wire the same logic in the out of box workflow GUI level.
Murugesa Pandian.,MCTS|App.Devleopment|Configure

Similar Messages

Any suggestions how can I delete or archive items with DocTitle as *.html ?

Any suggestions how can I delete or archive items with DocTitle as *.html ? These are the email templates checked in by Fusion Apps, and all I know are the DocTitles.
Archive servervice seems a better way to delete items at same time keep a backup. but not sure what's the correct way to setup/use the "aExportQuery" parameter. Seems it's been ignored from the ADD_ARCHIVE and EXPORT_ARCHIVE idccommands, codes listed below.
@Properties LocalData
IdcService=ADD_ARCHIVE
IDC_Name=CommonDomain_ucm11g_cs
aArchiveName=archive_test
aArchiveDescription=this is an archive test
aCopyWebDocuments=0
aDoReplace=0
aExportQuery=Standard Query ValuePanel UseExportDate 0 AllowExportPublished 0 AllRevisions 1 LatestRevisions 0 NotLatestRevisions 0 MostRecentMatching 0 CurrentIndex 0 Clauses dDocTitle:contains:.html CustomQuery dDocTitle%LIKE%'#%.html#%' IsCustom 0
@end
@Properties LocalData
IdcService=EXPORT_ARCHIVE
aArchiveName=archive_emt
IDC_Name=CommonDomain_ucm11g_cs
aExportQuery=Standard Query ValuePanel UseExportDate 0 AllowExportPublished 0 AllRevisions 1 LatestRevisions 0 NotLatestRevisions 0 MostRecentMatching 0 CurrentIndex 0 Clauses dDocTitle:contains:.html CustomQuery dDocTitle%LIKE%'#%.html#%' IsCustom 0
dataSource=RevisionIDs
aDoDelete=1
@end
<<EOD>>

You could use the Archiver app. You can use that app as-needed or set it up so that all items are setup to delete once they're checked in.
-ryan

Re:How can we delete the concurrent node entry from the FND_NODE table

HI ,
11.5.10.2 on Oracle Solaris on SPARC (64-bit) .
How can we delete the concurrent node entry from the FND_NODES table without running Autoconfig.
Currently we are having 3 nodes RAC and we are deciding to remove one node from the RAC and all 3 nodes are registered as concurrent node with application but concurrent manager is running only on one node.
Lot of the custom configuration we did it at application web tire level. If we run the Autoconfig at that time we need to redo those changes again that we are trying to avoid.
Regards .

we are trying to avoid to run FND_CLONE.setup_clean because it will delete all the nodes entries from the FND_NODES.If those entries are invalid then they should be deleted.
Running AutoConfig after purging the table will populate it with the correct entries.
In order to populate the nodes entries again we need to run autoconfig and it will change the server id in fnd_nodes and then we need to redo the ADI client configuration on users PC and redo all the changes that we made in jserv and webserver.For ADI Clients, you should use the correct server ids which will be populated in the table for you once you run AutoConfig.
For jserv configuration, you can refer to (Customizing an AutoConfig Environment [ID 270519.1]) to make the preserve all your custom setup/configuration after running AutoConfig.
If there any custom script to delete only one node from the fnd_node so that we don't need to run autoconfig after that, then I really appreciate.No.
Thanks,
Hussein

How can i delete Purchase Requisition item

how can i delete Purchase Requisition item
can any one hepl me
thanks in advanced.

Deleting a PR item in then sense via transaction or program.
If itz transaction, you can use transaction ME52N.
1. Go the PR via transction ME52N
2. Select the respective item, and click on TRASH BIN button i.e delete button from the above icons.
If you want to do it programmatically,maybe you can use: BAPI_PR_CHANGE for the same.
Kind Regards
Eswar

How can i delete my apple id and all related data?

how can i delete my apple id and all related data? including this forum account...

kweso wrote:
i want my email adress to be deleted out of this system. do you know any email adress where i can point my request to?
thx
If you don't want ANY one at Apple knowing your email address you could try this:
Go to http://myinfo.apple.com/ and where your email address is listed just replace it with a made-up one like "[email protected]"

How can I delete the list of watched videos on my iPad?

I have been watching videos on my ipad through the iTunes "home sharing" feature. It seems to work fine.
My problem is that I can't figure out how to delete the list (on the iPad) of videos that have been watched. Not only have I watched them but I have also deleted them from my iTunes movies list. I have tried syncing, signing out and back in to the iTunes store, turning off home sharing and then turning it back on again (which requires signing back in), all the while quitting out of the videos app and /or restarting the iPad before and after each of these steps.
The videos are shown as greyed-out icon/thumbnails in the iPad videos app. I am able to add new videos to iTunes, see them as not-greyed-out icons in the iPad app, and watch them. I just can't delete the shown list of the watched videos list on the iPad, which in the case of TV shows collect quite quickly and require lots of scrolling to get to the unwatched video icons.
Thanks for your help!
mug011

Yes, so...
I have also closed iTunes, reset network settings on the iPad, then shut down and restarted the iPad. Still, I end up with greyed out rectangular icons for all the movies I've ever streamed from my Mac Mini to my ipad via my home wireless router.
Again, I have watched all the way to the end of the movie, selcted the movie in iTunes and chosen "mark as watched", and then deleted it in ITunes.
Any ideas?

How can I delete a listing of 'Top Sites' that appeared on installing and syncing this android app with my Windows desktop?

xxxxx

Hi Russa1
I think Moses answered the Sync Question but as for:
"delete a listing of 'Top Sites'"
in Firefox 29 released April 29, 2014 you can now hide top sites:
https://support.mozilla.org/en-US/kb/use-awesome-screen-search-web-bookmarks-and-more#w_customize-your-home-screen

List item - Population - Based on Data setup

Dear All,
I need to populate the list item based on data defined at the database level.
Tables Used:
Table 1 : JBCAI_JOB_COM_ADD_INFO
Column Name     Pk     Null?     Data Type     Default
JBEDC_UID          1     N     NUMBER (22)
JBCAI_ADD_INFO_CODE     2     N     VARCHAR2 (2 Char)
JBCAI_INFO_CODE_SEQUENCE      3     N     NUMBER (3,1)     1
JBCAI_ADD_INFO_TEXT     Y     VARCHAR2 (35 Char)
SHIPCOMP_CODE     N     VARCHAR2 (4 Char)
Table 2 :CODES
CODE_TYPE CODE_VALUE DESCRIPTION NEXT_VALUE CODE_FLAG
MCAR 01 Customs References 01 NULL N
MCAR 02 Customs References 02 NULL N
MCAR 03 Value of Commodities NULL N
MCAR 04 Currency of commodities NULL N
MCAR 05 Purchase Order Number NULL N
MCAR 06 Other NULL N
MCAR 07 Consignee Name NULL N
MCAR 08 VIN NULL N
FORMS Section
=========
JBCAI_ADD_INFO_CODE are the list items which needs to be populated; JBCAI_ADD_INFO_TEXT(free text) which user can enter any descriptions.
References - Label of the Block
JBCAI_ADD_INFO_CODE JBCAI_ADD_INFO_TEXT
Customs References 01 - Free Text()
Customs References 02 - Free Text()
Value of Commodities - Free Text()
Currency of commodities - Free Text()
Purchase Order Number - Free Text()
Other - Free Text()
Consignee Name - Free Text()
VIN - Free Text()
VIN - Free Text()
Business Rules:
If JBCAI_ADD_INFO_CODE has the flag as 'N' in CODES table then user can select only one time from the list item.
If JBCAI_ADD_INFO_CODE has the flag as 'Y' in CODES table then user can do multi-selection from the list item e.g; VIN
How the records are fetched:
Value for the list item are been populated from CODES table ; which am doing through the below query.
In WHEN-NEW-FORM-INSTANCE am using the below code:
PROCEDURE p_fetch_code_value
IS
          l_query VARCHAR2(200) ;
          l_rg_name VARCHAR2(40) := 'CODES';
          l_errcode NUMBER;
          l_rg RECORDGROUP;
     BEGIN
          l_query := 'SELECT adcod.description description,adcod.code_flag code_flag FROM codes adcod WHERE adcod.code_type = ''MCAR''                    AND adcod.code_value IN (''01''''02'',''03'',''04'',''05'',''06'',''07'',''08'') ORDER BY code_value';
          l_rg := FIND_GROUP( l_rg_name );
          IF ID_NULL(l_rg) THEN
          l_rg := CREATE_GROUP_FROM_QUERY(l_rg_name, l_query);
          END IF;
          l_errcode := POPULATE_GROUP( l_rg );
          POPULATE_LIST('BLK_CONTROL.JBCAI_ADD_INFO_CODE',l_rg);
EXCEPTION
Handled WHEN OTHERS exception
END p_fetch_code_value;
Saving of Record:
List value selection are saved to JBCAI_JOB_COM_ADD_INFO.JBCAI_ADD_INFO_CODE column.
Free Text is saved to JBCAI_JOB_COM_ADD_INFO.JBCAI_ADD_INFO_TEXT column.
Doubt:
When i select the first list item value i.e Customs References 01 and then enter some description i.e free text and moved to the next list item; the value Custom reference 01 should not be visible wheras the other values should have to be visible e.g; Customs Reference 02,Value of Commodities.....
Please help and let me know how can i acccomplish this task?
Thanks....
Regards,
Sunil.G

Hi Sarah,
Thanks for your reply.
There is no issue in the population of the list item; it is working fine with the query which i have pasted.
My doubt is:
There are few places where i have set the code_flag as 'Y' / 'N'.
For the first time when user selects the list item; all the values should be shown.....
If user has selected the first list item i.e Customs Reference 01 for which the code_flag is 'N' from a multi-record block; then when he moves to the further lines the previous selection for which the flag is set as 'N' should not be shown(if user has already selected once) e.g; 'Customs Reference 01' should not be shown again if user has made the selection before.
Plz revert incase more explanations required.
Thanks...
Regards,
Sunil.G
Edited by: Sunil G on Nov 29, 2009 12:16 AM

This may sound goofy but how can i delete ALL the items in my shopping cart

i would really like to know how to do this so i can start from scratch i printed off all that was in it so i can refer back to it but i want it all gone at once just all of it clicking the x is just too much for me to sit for minutes on end / hours to do just too much in there.
VV ginaanig

Try this instead:
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. Select the backup volume from the left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.)
4. Click on the Erase button.
You will need to reconfigure Time Machine preferences for the backup.
FYI: Never remove Time Machine backup data except through the Time Machine application. If you aren't sure about using Time Machine then visit Pondini's Time Machine FAQ for help with all things related to Time Machine.

Palm Z22-how can I delete previous recurring items in one fell swoop?

Hello, I have a number of daily and weekly reminders in my palm z22 handheld pda (software v 4.5.2P) calendar (datebook) that are useful for the future, but all the the old ones (that I was too busy to delete at the time) are simply bogging down my overall speed and hogging my overall memory. Is there a way I can delete recurring reminders that occur before today's date? Thanks for any help. Bob

Try this: On your handheld or desktop (one, but not both), go to the first date of the recurring item you want to keep, and make a minor change (i.e. set a reminder time, or delete the reminder time, or add a period to the subject, etc), selecting "this and future" for what you want the change to refer to. Synch, then go to one of the older items that you want to delete, and delete "all" of those items. The one you changed should still remain on your calendar, and then you can fix that minor change that you made to keep it. This works for me (Tungsten E2), so I hope it also works for you.

How can i delete my itunes account and all my data

I am done with using smartphones and am in the process of removing myself from various online/digital sites. How do I wipe my iTunes account and erase all my information

sign out of iTunes/apple id - imessage - facetime - icloud - find my iphone.
Then settings - general - reset - erase all contents and settings.

How can i deleted the entire entries of my calendar

I noticed that i've multiple entries in my both macbook pro (Lion OS) and iphone 4. So these what I did to solve the problem.
1. Using my iCal from my MBP to delete all the multiple entries.
2. Syn my iphone 4 and selected the calender and click on iTune INFOR on ADVANCED and click "Calendars" (Replace information in this iPhone - During the next sync only, iTune will replace the selected information on this iPhone with information from this computer."
3. Nothing happened.
4. Syn once again - Still nothing happened.
So i'm enquiring how can I delete the entire calendar entries from my iPhone so the next time syn it will syn with my iCal.
Pls advice, or there's a better way in solving the problem.
Thank you.

DEFAULTY CITY? CALENDAR? HUH?
I am not quite sure what you are asking, but there's this:
Your location for time purposes is set in System Preferences, Date & Time, Time Zone tab.
If you are using iCal, there is a Time Zone option in iCal Preferences, Advanced.
charlie

After updating apps how can i delete them in ios 7

After updating apps on my iPad how can I delete the list of updated apps?

You are most welcome
Feedback to Apple if you like them to disappear after update.
http://www.apple.com/feedback

Can we create a list item as a data block item?

Hi,
I have changed a text item to list item on the data block.
This list item used to get populated when it was control block item, but after i changed it to data block item, it's not getting populated.
My question is, can we create a list item(poplist) as a data block item?
Any idea?
Thanks in advance
R.G

Hi
When you use ctl blocks data dose not fetch from Database. But in data blocks it get fetches when you execute query. So you have to make sure table column values are matching with the List Box values you have given.
So please check table values.
Nilaksha.

How can I delete all items on the "Done" list in Reminer-App? There are meanwhile hundreds of items (shopping, appoitments, ...) and I don't want to spend hours deleting them.

How can I delete all items on the "Done" list in Reminer-App? There are meanwhile hundreds of items (shopping, appoitments, ...) and I don't want to spend hours deleting them.

You can't remove the built-in root certificates, but you can remove their trust bits via the Edit button to prevent Firefox from using them as a trusted root certificate.
Intermediate certificates that Firefox has stored when visiting websites that show as "Software Security Device" should never has trust bits set.
Note that it is the responsibility of a server to send all required intermediate certificates to make it possible to build a certificate chain that ends with a built-in root certificate.

How can I delete a list item entry based on date? Nintex workflow?

Similar Messages

Maybe you are looking for