How do assign the user of Consumer Portal to the role of Product Portal?

Hello All:
    Use FPN, now I want to assignment the role of Consumber Product Portal the user of Consumer Portal to  the user of Consumer Portal(RRA) .But because There are too many user that needed be configured.It is arduous work.
     So Pls help me and tell me how to import the role of Product portal to the user of Consumter Portal,
Thanks In addvance.
jideliang

Thank all:
Because I want assign the Remote Role of Produce to user of Consumer with FPN.Use:
[Role]
rid=Role1
rdesc=Role description
user=MarcPeters;JackSmith;Alan_Fox;
group=HappyBuyersOf2003;HappyBuyersOf2002
Can not import.
I have find the document "How to Automate Content Creation via XML Content and Actions (NW7[1].0).pdf", it help me to use XML to import the role,the following format:
<Action id="com.sap.portal.roleassignment">
<Roles>
<Role name="pcd:portal_content/myFolder/myRole" producer.alias = "myProducer">
<Principal type="user" id="test"/>
But when I import the XML file.There is a error.
Have someone used it ?
jideliang
</Role>
</Roles>
</Action>
How

Similar Messages

  • How to capture the user who has logged into the portal.

    Hi,
    How do I capture the user who has logged into the portal.
    HOw do I retrieve the first name and last name of the logged in username.
    Could someone provide me a related link or PDF to work on this.
    Thanks,
    Suvarna

    Hi suvarna,
    Check the following code
    ISearchResult rst = UMFactory.getUserFactory().getUniqueIDs();
                      IUserFactory usf = UMFactory.getUserFactory();
                      IUser iuser = null;
                      IUserListElement userElement = null;
                      int i = 0;
                      while (rst.hasNext()) {
                            iuser =
                                  UMFactory.getUserFactory().getUser(rst.next().toString());
                            String email = iuser.getEmail();
                            String fname = iuser.getFirstName();
                            String lname = iuser.getLastName();
    regards
    Anil Dichpally

  • How to find the user ID who has deleted the Cycle count document?

    I am interested in knowing how we can know the User ID who has deleted the Inventory Cycle count document deleted using LI02N. I have checked the table LINV and also in the storage bin Inventory data. But in storage bin inventory data only counter name is captured if it is assigned during activation of inventory cycle count document. But it may not be necessary that counter has to delete the inventory document.
    Kindly advice me how can I get to know who has deleted the Inventory Cycle count document.
    Thanks in advance,
    Ramesh

    no way to ffind this
    Have you tried with  AUT10  ??
    thanks
    G. Lakshmipathi

  • How to assign a user and position to a release code .

    How to assign a user and position to a release code ?
    I tried in SU01 but the data is not getting reflected in the table
    T16FW. from where the rule (20000026) is picking the user .
    is there a transaction to do so ?
    Thanks in advance .

    These are done in SPRO. Search for release in SPRO, you will find your answer.
    Regards, IA

  • How to assign a button for attachment and send the data through browser ?

    Hi friends,
    How to convert to browser ?
    how to assign a button for attachment and send the data through browser ?
    Thanking you.
    Regards
    Subash.

    Refer to
    How to create a text box in ascreen painter?
    where another user (venkateshwar reddy) has asked a very similar question...
    Jonathan

  • How do I prevent "The user profile service service failed the log on" error messages?

    I work for an organization with approximately 60 staff members across ~80 Windows 7 Professional PCs. Users log in with Active Directory accounts.
    Approximately once per month, a random user will get an error message while attempting to log into their machine that says "The user profile service service failed the log on."  The solution to resolve this issue is here: http://support.microsoft.com/kb/947215?ppud=4&wa=wsignin1.0.
    The problem is that I want to PREVENT this issue from happening, as it is incredibly inconvenient for the user. I had one staff member board a 5-hour plane trip expecting to do work, and once she got in the air she logged in and
    received the error message and was unable to use her computer for the trip. I've had others locked out of their computer with deadlines to get things done, while I am at home off the clock. Editing the registry is not an easy fix, and so it's not something
    I can just post instructions for in a knowledgebase article.
    Does anyone know how to prevent this issue from occurring? I believe that it has something to do with a network-based startup script, or a service trying to connect to our file server, or the computer trying to connect to our ad server. All of these
    are blocked by firewalls (unless the user is off-site), and I suspect that the services may be timing out, causing the user profile service service failed the logon error message, but I can't seem to eliminate it, after nearly a year of trying.
    90% of the time this problem occurs when the user is off-site, but it has happened while the user is in the office too. Once the user gets this error message, the only way to resolve the problem is to log into their computer as a localadministrator account
    and perform the method #1 fix in the knowledgebase article.
    Thanks

    Have you checked the logged files in event viewer around the time when problem occurred?
    Is there any suspicious events like error or warning related to this issue.
    Try run Active Directory Best Practice Analyzer:
    http://technet.microsoft.com/en-us/library/dd759260.aspx

  • Workflow to populate "Assigned to User" with AD group of the "Assigned to User" is empty or Null to user is empty.

    I am updating roles and would like to use the [me] and [my group] tokens for views.  I am planning on updating all the templates to specify an ad group in the "Assigned to User" field that corresponds to the appropriately selected support
    group.  I would like to avoid having the "Assigned to User" blank (this could happen either via using a generic template, or when re-assigning workitems) so I think I need a workflow to remediate any workitems that have no Assigned to Users.
     There does not seem to be an easy way to do this just with a workflow configuration.  Do I need to create a workflow with the authoring tool?  Can I create a workflow that will compare a support group (enumeration?) and assign an appropriate
    AD group?

    probably the easiest way to do this would be to create a console workflow that runs on create (or update, if you want this to be reoccurring) and checks for the looks for the Display Name of the Assigned to user. This would only be populated if there was
    a legitimate user, and would be null otherwise.
    you could create console workflows for each support group (i.e. If Supportgroup = NumberA and AssignedtoUser.Displayname is blank) that applies a template that contains the correct user or group for that support group enum.
    other options are available, so let us know what you're ideal conditions are.

  • How to create a user  y which will have the same content of existing user x

    how to create a user y which will have the same content of existing user x ,
    like all the tables,procedures,functions and packages

    You can do the following.
    1. Use CREATE USER to create the new account/schema
    2. Use exp to export old schema
    3 Use imp with fromuser=<old user> and touser=<newuser>

  • How do I get the user name and password for the Apple Extreme Router to connect to a Slingbox

    How do I get the user name and password for the Apple Extreme Router to set up my Slingbox?  It will not accept the Apple Extreme Name and password.

    The AirPort Extreme does not have a User Name, but it does have a device name and device password, which you may have already tried.
    There is also a Wireless Network Name and Wireless Network Password for the AirPort Extreme, which might be what the Slingbox is looking for if you are trying to connect it to your wireless network.
    There are no other "user names" or "passwords" on the AirPort Extreme.
    You established the device name, device password, wireless network name and wireless network password when you originally configured the AirPort Extreme.
    If you cannot remember these, you will need to perform a Soft Rest to reset everything. Follow the instructions in this Apple support document:
    Resetting an AirPort Base Station or Time Capsule FAQ

  • How to avoid the user accounts to appear in the disk boot while installing Yosemite?

    Hi, there is an issue when I encrypt the disk in Yosemite, when I make a clean installation, I first format partition with encryption, install system and restart computer, in the first boot the system ask only for disk password then continue creating user account, when I finish the configuration and restart the computer, the first boot screen ask me for disk password or user password, this is wrong, I want that the system ask me first the disk password and then the users accounts passwords to start the session as it was in Mavericks, so I try different ways to do this.
    1. In clean Installation is not working, every time that create a user it appears in the first boot screen, in which the system must ask only for disk password.
    2. In upgrade Installation with a computer already encrypted, it appears to works properly but if you create a new user it appears in the first boot screen.
    3. I test this by doing a clean installation without encryption, create a user and make an image of this partition, then I copy the dwg image to an external disk, then start computer with an USB with Yosemite, using disk utility I erase the partition and format it with encryption, then restore the dwg image in this partition, it looks that works properly, but if I create a New User then the new user appears in the first boot screen when only must ask for disk password.
    Can someone help me with this issue please?
    If there is someone of Mac can you tell me if this is going to be corrected in this version? or we must wait for the next OS X version.
    Thank You.

    Hi, there is an issue when I encrypt the disk in Yosemite, when I make a clean installation, I first format partition with encryption, install system and restart computer, in the first boot the system ask only for disk password then continue creating user account, when I finish the configuration and restart the computer, the first boot screen ask me for disk password or user password, this is wrong, I want that the system ask me first the disk password and then the users accounts passwords to start the session as it was in Mavericks, so I try different ways to do this.
    1. In clean Installation is not working, every time that create a user it appears in the first boot screen, in which the system must ask only for disk password.
    2. In upgrade Installation with a computer already encrypted, it appears to works properly but if you create a new user it appears in the first boot screen.
    3. I test this by doing a clean installation without encryption, create a user and make an image of this partition, then I copy the dwg image to an external disk, then start computer with an USB with Yosemite, using disk utility I erase the partition and format it with encryption, then restore the dwg image in this partition, it looks that works properly, but if I create a New User then the new user appears in the first boot screen when only must ask for disk password.
    Can someone help me with this issue please?
    If there is someone of Mac can you tell me if this is going to be corrected in this version? or we must wait for the next OS X version.
    Thank You.

  • How do I allow the user to select and resize the CNiGraph while executing?

    I am writing an application with Measurement Studio and Visual C++ that will allow the user to create graphs on the fly. I need to give them the capability to select a graph and resize it in a manner consistent with most other Windows programs (i.e. resize handles). I have tried various implementations of the CRectTracker class and can get it to work for Microsoft controls, but I can not get it to work with the CNiGraph (the only one I have tried so far). The code runs but I never get the selection box or handles around the control. Is there a way to do this and is there an example anywhere that I can go from? Any help would be appreciated.

    Never mind. I have now found the way to do this.

  • How to privent the users from resizing/maximizing/minimizing the mdi window

    In http://forms.pjc.bean.over-blog.com/60-index.html i read about 'A JavaBean to handle the Forms applet's frames' .
    In formsframe.java It is written that the author is Francois Degrelle so i want to ask Francois: My goal is to privent the users from resizing/maximizing/minimizing the mdi window. I have jre 1.6.0_10 which jar file do I need formsframes5.jar or formsframes.jar (those files are in formsframes.zip)
    thanks

    lidochca wrote:
    Hello, please help me to solve the problem !!Key Loggers, Spyware. The solution is not to write such reprehensible crap.

  • All the users can buy for all the purchasing groups?

    Hello,
    I have created the organizational structure as follows:
    (root level 1) Company O  50000758
        (root level 2) Plant    O  50000759
        (root level 2) Purchasing organization   O  50000760
              (root level 3) Purchasing group1        O  50000761
              (root level 3) Purchasing group2        O  50000762
              (root level 3) Purchasing group3        O  50000763
    The Plant and the Purchasing organization bellows to the Company
    The Purchasing group bellows to the Purchasing organization
    (level A) Position DATA-ENTRY1
    (level B) Central person (employee) DATA-ENTRY1
    (level C) User DATA-ENTRY1
    (level A) Position DATA-ENTRY2
    (level B) Central person (employee) DATA-ENTRY2
    (level C) User DATA-ENTRY2
    All the users can buy for all the purchasing groups
    At what level I have to assign the Positions (levelA)?
    Cheers,
    Marta

    Hello Subram,
    Thank you very much for your help.
    To shop on behalf, I have to fill the attribute REQUESTER at (level A) Position level.
    What I have to put in that attribute? The (root level 2) Purchasing organization O 50000760?
    I have a error when I put 50000760? ...."Object type XX not defined"
    Do you know how to help me?
    Cheers,
    Marta

  • Where to find the User Id that has run the the F110 Payment Run in4.6B

    Hi all,
    Can anybody help me out in seeing the User Id who has created the F110 propsal even when the propsal log has not been created in 4.6B
    Thanks in advance,points will be added if useful

    Hi,
    It is very simple, go to any transaction which posted through F110 that specific payment run, double click on the transaction, then click on 'display document header' icon looks like 'hat' in the icon bar in the panel you will get the information entered by, entry date and entry time.
    Try once and assign points if useful.
    Sarma BH

  • Windows 8 "The user Profile Service service failed the sign-in. User profile cannot be loaded."

    Hello All,
    OK here is what i'm trying to figure out. First off i am new to my company and still trying to learn the in and outs but have already been thrown into the lions cage by myself. I inherited a network that is run on Windows Server 2008 R2. The domain consists
    of XP,Windows 7 and Windows 8 machines. Here is the issue i am facing.  
    Every once in a while (usually after a few hours of inactivity) when a user goes to log into the machine they receive an error stating  "The user Profile Service service failed the sign-in. User profile cannot be loaded.". However
    this only happens to the windows 8 machines and like i mentioned earlier it usually happens after a brief inactivity period. Now restarting the machine always works(100% of the time) but this super annoying. I have also completely restarted the server just
    to find out the problem resurfaced later that day.
    Any idea on how to fix this issue? Like i mentioned this only happens to the Windows 8 machines. Is there something i should do on my server to prevent this?
    Any help would be greatly appreciated!
    Thank you

    This one might help.
    http://support.microsoft.com/kb/947215
    Also might ask them over here.
    https://social.technet.microsoft.com/Forums/windows/en-US/home?category=w8itpro
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Maybe you are looking for