How do i filter the records in analytic view by using variable/parameter for a time range

i have a analytic view which has a output column as date type. i want the user who use this view have the control to decided the output records based on a time range (from x to y).
i tried to create 2 variables, 1 for start_time, 1 for end_time. Ideally, i should have a expression for filtering data like this:
$$start_time <= date_column <= $$end_time
However, the variable windows doesn't seem to be feasible for the expression as above.
Does anyone has the same problem and get it solved?
Thanks!

just figured out by my own. So the answer is using "variable" with "range" option.
Making a variable, then set the "selection type" to "range".
When preview the data, the variable input window pops up with operator on default "equal", use dropdown list to swtich it to "between", then you can enter the start_time and end_time as a range filter.

Similar Messages

How do you save the recorded presentation on Keynote to use in an iMove project?

I have figured out how to record my slideshow, but I can not figure out how to export it as a video. On YouTube I have seen people do it, but on a older version. I am trying to use the presentation in iMovie. I have the Keynote version 6.1 and iMovie version 10.0.2. If anyone could help me that would be great!!!

I exported my slide show as a QuickTime movie and then used the Import feature of iMovie to import it into my project.

How do I print the displayed graph? I am using Measurement Studio for Visual Basic.

a

It is true that calling the PrintForm method is the easiest way to print your graph. However, if you wish to print only the graph, and not the rest of your form, there is a way to do this also.
The CWGraph control, and some other CW controls, supports the ControlImage method which returns a Windows metafile containing an image of the graph. You can then send this image to your printer using environment-specific printer commands.
In Visual Basic, use the Printer.PaintPicture command to send the metafile, and top and left coordinates to the printer. Then call Printer.EndDoc to flush the job to the printer:
Printer.PaintPicture CWGraph1.ControlImage, 0, 0
Printer.EndDoc
In the above code, the second and third parameters specify the position of the image o
n the page; you can also enlarge or shrink the image by specifying width and height. You may want to take a look at the Visual Basic PaintPicture function help for more details on this function.
J.R. Allen

How do you filt the "total" in Visual Composer?

Hi everyone :
My method is to filt the string "total" of the value of the filed .It can work ,but i think it's indirect ,so how do you filt the total in Visual Composer?
thx
chan

Hi Zegion,
Some help links for visual composer,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c6b2d590-0201-0010-42ba-a53a5d422310
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7d48d999-0701-0010-5790-8b2c5ae7107d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1752b737-0401-0010-0ba3-87c3eda8c6ce
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cab252d4-0a01-0010-3984-ee345859dde6
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01c5d690-0201-0010-668a-b8d97d51a566
for How to Guides - Visual Composer.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/16244247-0a01-0010-3294-d81c21e7e86e
Regards
Prakash

Periodic Alert-How to send all the records returned from the SQL in a mail?

Hello all,
I have defined a Periodic Alert, my SQL query returns more than one record whenever I run it. I also defined an action to send an email with the message consisting of the output variables from the SQL. Whenever i run this alert, a mail is being sent for every single record returned from the query. But i want to send a single mail containing all the records information that my SQL query returns.
For Example: My SQL query lists all the users created on current date.
Select User_Id, User_Name into &OUTPUT1, &OUTPUT2
from fnd_users where trunc(creation_date) = trunc(sysdate)
Now i want to send a mail with all the users information from the above query, to SYSADMIN. How can this be achieved?
Thanks & Regards
chakoo

Hi Chakoo,
If the Periodic Alert is not working as requried. You can write a simple package with 3 procedures to implement the writing output to a out file and simultaneuosly send email to multiple receiptents.
Example:
Create Package xx_pac
Create public Procedure P1
begin
Select User_Id, User_Name into &OUTPUT1, &OUTPUT2
from fnd_users where trunc(creation_date) = trunc(sysdate)
fnd_file.put_line (fnd_file.output, &OUTPUT1, &OUTPUT2);
end;
(Create private Procedure P2
begin
---Write the email package using the UTL_SMTP approch. Using this approch you can send the procedure P1 output file as an attachment to the desiginated receiptents.
end;
(Create public Procedure P3
begin
---call the procedure P1 using the "g_request_id = fnd_request.submit_request"
---Wait for the above procedure to complete using "l_conc_status := fnd_concurrent.wait_for_request" procedure.
---call the procedure P2. (When called you must provide the correct to, from address)
end;
end;
Register the Package xx_pac as a concurrent program and schedule when submit it from the request.
Regards
Arun Rathod

How Do I set the "Record" settings in Sound booth.

How Do I set the "Record" bit settings in Sound Booth, i.e. the 16 bit rate so that the wav files will burn to a music CD. (the default 48 will dot burn to a CD).
Thanks Marv.

Why not post in the SB forum?
Go to File/Record and set the format to what you need:

How can I reduce the recording time of the webcam?

How can I reduce the recording time of the webcam?
thanks
Alex

Keep in mind that Logic also has a limit of 8550 quarter notes. So changing the time signature to 4/8 can get longer recording times. So make sure you change this setting along with the song end. See page 93 in the reference manual.
MBP 1.83 & MDD 1G DP Mac OS X (10.4.7) Logic Pro 7.2.2, Motu 828MkII+828, Firebox LC&XT, Tranzport, Unitor8+(3x)AMT-8's

How could you map the Records of OM- PA

Hello Experts,
How could you map the Records of OM->PA ,if the designation of person changes from manager to supervisor from certain date.and how can we see the changed records??
Solution :we can see the changes in the addition action infotype 302,personel hiring action(0000) delimit the record whenerver we changes the designation,and in the orgassingment infotype overview ,action infotype over view we can see the changes and PLOGI-ORGA IS the integration switch and position is the key for map the recoed from OM ->PA
Post your comments if the solution is correct???
Regards
Chandra

Thanks a Lot!!!!
Regards
Chandra

How can I numbered the records in the report

Hi, can anyone please show me how do I number the records in the reports in the Report Builder?
Thank you.

Hi,
Follow the following steps:
1. Create a summary column in the data model of the report.
2. Select the function as Count.
3. Select the source for which you want to generate the serial no.
4.Reset the column at Report level.
5. Now create a field in the paper layout of the report and select this summary column as the source. The field should be in the same repeating frame as its source.
This will generate the nos. as reqd.
Swati

Can we Filter the records using ROW_NUMBER() funtion?

Oracle 10G
Hi all,
In the below query i used ROW_NUMBER() function to get the rownum value after descending order the results.
How Can i filter the first 10 rows without using a subquery?
I tried to use alias names but it doesn't work. Is there a way or it should be done only with subqueries?
select article_type_id,
article_type_desc,
ROW_NUMBER() OVER ( order by article_type_id desc) rnum
from s_article_types
Results are
ARTICLE_TYPE_ID     ARTICLE_TYPE_DESC     RNUM
37     Non-Degree News     1
36     Career News     2
35     ET News     3
34     Hotcourses 2.0 General     4
33     Hotcourses 2.0 Permanent     5
32     Hotcourses 2.0 News     6
1 General news 37
Thanks in advance

You can do
select * from
select article_type_id,
article_type_desc,
ROW_NUMBER() OVER ( order by article_type_id desc) rnum
from s_article_types
where rnum <= 10You can't do it direct.

How can we lock the table?? how can we lock the record

Hi
how can we lock the complete table?? how can we lock the record ?/
Thanks
Rama

Lock objects are used to lock the database table while making the modifications on the database table.
you can create your own lock objects using SE11.
if you create lock objects on any table system will create two function modules.
1.ENQUEUE....
2.DEQUEUE.....
first one is used to lock the table
second one used to removing lock on the table.
lock Table
CALL FUNCTION 'ENQUEUE_E_TABLE'
EXPORTING
tabname = table_name
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
Unlock Table
CALL FUNCTION 'DEQUEUE_E_TABLE'
EXPORTING
tabname = table_name
check this link :
http://help.sap.com/saphelp_40b/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
_SCOPE = 1: The lock is not sent to the update program. The lock is removed when the transaction is ended.
_SCOPE = 2: The lock is sent to the update program. The update program is responsible for removing the lock. The dialog program which requested the lock no longer has an influence on the lock behavior. This is the standard setting for the ENQUEUE function module.
_SCOPE = 3: The lock
Re: lock objects
Reward if this helps.

Table for the recorded result.Result automatically calculated using formula

Hi experts,
I want to know where this results will be saved(table name) when we use formula in inspection plan.I have marked char.calc in control indicator and formula has been entered in inspection plan.While entering the result when i click on calc button it is displaying correct result and i have saved.when i check the table QAMR,QASR it is not displaying the result for the MIC which i have used formula.I am able to see the formula in QAMV table.When i want to display this result can i retrive the result directly from any of the table or shall i calculate the formula in the program to display? If i should calculate the formula how to calculate?
Regards,
Shwetha.

Hii,
If u are using Inspection point for the results recording then results will get stored in QASR table. The manually entered results alone will get stored in the Original_ Input field. Calculated parameters will get stored in the mittelwert field (mean value). Kindly check QASE table for lot without inspection points.
For ex : Results Field name mean value (1.7500000000E+02)
with regards,
K.Lokesh.

How can i see the text of one view?

I want to see the text of one view stored in my Oracle DB, then i run the next query:
SELECT TEXT FROM ALL_VIEWS WHERE VIEW_NAME = view_name;
The problem is that the information return me truncated.
How can i see the text of one view?
Sorry, my English is terrible.
I'm from Argentina.

Use 'set long 100000000' at sql prompt. Run your query again.

How do i overcome the error"we are unable to start your subscription for Adobe Photoshop CS5.1 Exten

hi.
how do i overcome the error"we are unable to start your subscription for Adobe Photoshop CS5.1 Extended Subscription Edition"?????????

If this is your first time launching the software while receiving this error message I would recommend contacting our support team. For the best assistance, I recommend our chat support at http://adobe.ly/yxj0t6. Our chat representatives can provide a personalized experience to resolve the issue you have described.

HT201365 I just updated to ios 7 on my iPhone 4 how do you turn the apps off when your not using them? The old way of double clicking and then pressing the app until a red minus button comes doesn't work it opens it back up!?

I just updated to ios 7 on my iPhone 4 how do you turn the apps off when your not using them? The old way of double clicking and then pressing the app until a red minus button comes doesn't work it opens it back up!?

Double click home button, then swipe up on app picture (not the icon itself)

How do i filter the records in analytic view by using variable/parameter for a time range

Similar Messages

Maybe you are looking for