How do you make the size of the font larger in Contacts on your ipod touch

I'm trying to find out how to make the font size larger in "Contacts". I don't want to have to put eyeglasses on just to be able to see my contacts. There should be a way to make them larger. anyone know how? Thanks in advance.

There is a zoom feature. You can learn about it, including how to activate it, in the manual:
http://manuals.info.apple.com/enUS/iPod_touch_iOS4.1_UserGuide.pdf

Similar Messages

  • How do you change image size in the title window?

    I just changed operating systems to Windows 7, which meant that I had to re install Premiere Pro CS4. I am now working on a 64 bit system. Might not make any difference, but thought I would give you the specifics just in case.  When I pull up the title window to add a title to my clip, the image is about the size of a postage stamp. How do I increase the size of the image in that window?

    Thank you again for responding Hunt. I did find out what what was happening.
    I had to reinstall the program on my computer. I just upgraded to Windows 7, and I now have a 64 bit system. When I booted up PPCS4, I assumed that my settings would be the same as they were before when I had Vista installed and didn't bother to check them when I started a new project. Well, they were not. I also added a TV tuner card to my computer. I now can watch HD TV on my computer. I suppose that it is possible that somehow PPCS4 noticed that, and set my default settings to HD, rather than NTSC DV. I just merrily went along clicking the OK button and started editing. When I start a new project now, I select NTSC DV and the Title window works just fine, and exactly the way I expect it to.
    I just received Jeff Bellune's book Adobe Encore DVD 2.0 in the mail and will be totally immersed in Encore studies today. With all of his children, I don't see how he had time to write it, but I'm glad that he did. I also ordered a book entitled Designing Menus with Encore DVD. I know that it was written for an earlier version than CS4, but I will trust what you said about that. Many things are the same with some minor variations due to upgrades in the program. The basic ideas don't change, but how you accomplish them can, and usually do over time.
    Terry Lee Martin
    Date: Mon, 17 Aug 2009 16:04:16 -0600
    From: [email protected]
    To: [email protected]
    Subject: how do you change image size in the title window?
    Welcome to the forum.
    That is an odd one. The Title should be the same Frame Size as your Project/Sequence. What is it's Frame Size? Also, are you perhaps doing a Title based on an older Template, that was done for a different Frame Size?
    What happens if you choose Title>New Title>Default Still?
    Good luck,
    Hunt
    >

  • How do you make adobe X open the "combine pdf" window in the foreground?

    This may not be the correct forum for this question, but considering that I simply
    have not been able to get a reply in any other Adobe forum, I decided
    to just post this question to ALL Adobe forums until I get a response.........
    How do you make adobe X open the "combine pdf" window in the foreground?
    I am using a "Windows 7" computer at work with "Acrobat X Pro" and I'm constantly combining
    pdf's and tiff's in Acrobat.
    It would be nice if when I select 30 or 40 files to combine, the *******
    "Combine Supported Files in Adobe Acrobat" window would open in the
    foreground, not behind the 10 or so windows already open.
    I have been researching this for some time now with no solution.
    If the answer is that "IT CAN'T BE DONE", then that's fine. At least
    I will have an answer and can stop searching. If (as I suspect) it can
    be done, then kindly supply me with "step by step" instructions.
    Michael Jones

    Hi ,
    I guess that was a bug in that version .
    It does not happen in Acrobat XI and Acrobat DC .The window comes right in front of everything else .
    I wonder that was a bug and that was fixed the other versions.
    You could upgrade to the latest Acrobat version ,i.e Acrobat DC and you would not experience this anymore .
    Regards
    Sukrit Dhingra

  • How do you make it so that the ipod will play all the different artists featured in an album when you click that album to play?

    How do you make it so that the ipod will play all the different artists featured in an album when you click that album to play? At the moment, each artist in the album is being separated and I can't play them together. For example, to play the Halo 2 Soundtrack, Hoobastank, Breaking Benjamin, Nile Rodgers, etc. are some of the artists featured. However, in the Albums category, they are each separate choices. I want to play them all together, but can't. Is there a way to do that?

    It sounds like the album metadata is incorrect, or differs from song to song in iTunes.  Albums with various artists will play properly assuming all the songs are tagged with the same identical album name, as well as the track number.  For the Halo 2 Soundtrack, metadata should look like this:
    Song: <Song Title>
    Artist: <Song Artist>
    Album: Halo 2, Vol. 1 (Original Soundtrack)
    Genre: Soundtrack
    I had a similar problem with my imported Cowboy Bebop albums and the mixture of artists/album names.  Once I adjusted the metadata, all of them play in the correct order just by selecting the Album from the available list or in Coverflow.

  • How do you make VLC Media Reader the default reader

    How do you make VLC Media Reader the default reader for playing DVI videos that are on a DVD in the DVD player

    For Snow Leopard and below (don't know for Lion) there is a free preference pane called RCDefaultApp that has all your file associations in one easy to manage location, includes tons of stuff, even controlling what gets opened when you click a link on a web page. Webcam and other associations. The Get Info method also works for your immediate need.
    http://www.rubicode.com/Software/RCDefaultApp/

  • How do you make hanging indents on the iPad version of pages?

    I'm trying to write a paper that needs to be in APA format which includes hanging indents. How do you make hanging indents on the iPad version of pages? I don't want to have to convert it into word every time I need to write a paper or fix the formatting

    Create a paragraph style which has the margins and paragraph indent where you want them.
    http://help.apple.com/pages/ipad/2.0/#/tan72487ce9
    Once you've done it for one paragraph and got that looking right you can copy and paste that style onto other paragraphs:
    http://help.apple.com/pages/ipad/2.0/#/tana9e5281c1
    Sooner or later you should probably learn to use the help function on your expensive device and software.

  • How do you make imessage work? The icon is there. You can type in the recipient but are not allowed to hit the send button

    How do you make imessage work? We upgraded to verision5. The icon is there. You can type the message but the send button is not available.

    There is some instability in  iMessage.  It is a versatile and confusing app even though there are so few options in its use. 
    I had issues trying to get iMessage work on both my iPads and my iPhone. 
    ON the iPhone, turning off WiFi service and then trying iMessage fixed the problem.
    On the iPad 2, same thing.  Turning off WiFi service fixed it.
    On the iPad 1, I took a suggestion from zoomzoom and changed the WiFi network configuration on the iPad to use 8.8.8.8 as a DNS server and then use iMessage.  That fixed it.   Now I put the DNS back to default and it still works.
    I suspect the iPod Touch will have the same fix as the iPad.
    If you have a WiFi and 3G iPad or iPhone, try turing off WiFi and see if that fixes it. 
    Why?  (beware, some of this is guesswork)
    iMessage can talk SMS to cellphones and smartphones (that are using the cell-network).  It can also talk Apple iMessage format to iPhones and iPads whether they are on cell-network or on WiFi.  If you are talking to an SMS cellphone, iMessage figures that out and blindly sends your message.  If you are talking to a iOS5 device, iMessage figures that out too, checks to see that they are on-line, and then does something different if they are or are not on-line.  If you type in an email address, and not a phone number, I think iMessage attempts to see if the email address is registered with Apple (or iCloud or whatever) and if it is not, it does something to let you know, possibly by making the Send button not light up. 
    In order to register iMessage and an email, you have to let the iOS device see whatever service it is that iMessage uses.  That is where the problem happenes.  zoomzoom suggested manually setting the WiFi DNS to google's 8.8.8.8 IP address, then run IMessage, and that seemed to fix the problem.  Setting the iOS device to use 3G-only (by turning off WiFi) also fixed the problem.  I suspect going down to StarBucks or McDonalds and using their WiFi would also fix the problem.  Once the problem is fixed, it doesn't seem to come back so I can't test these 'fixes'. 
    To change the DNS on your iPad find your WiFi networks configuration, click on the blue arrow, touch DNS, backspace over the number that is shown, type in 8.8.8.8    Then click on the WiFiNetworks button at the top of the screen.  Now go run iMessage.  After that, you can delete the DNS entry again and leave it blank.  Your iPad will fill it in from the WiFi router when it needs it.

  • How do you make multi cameras look the same?

    So I have three cameras used in the shoot. Lighting is from regular track lighting most commonly found in ware shouse type venues. Cameras 1 & 2 are one foot off the ground pointing ever so slightly up. Camera 3 is shooting from 15 feet off the ground pointing down. How do I make them all look the same in post production? When I try to increase the brightness in camera 3 it looks washed out. When I try to dim the brightness in 1 & two it looks dark and shadowy.

    Ideally you start with this:
    • 3 identical camcorders.
    • Manually set the white balance in each camcorder onsite before doing a shoot.
    • Make sure the 'program' setting is the same in each camcorder, e.g. they should all be "Auto" or "Spotlight" or "Portrait" etc. - the one you prefer.
    • If possible, manually set the exposure in each camera
    What probably happened is your camcorders' auto exposure did its job and the cams pointing upward were underexposed because the sensor was affected by the overhead lights.
    If your clips' brightness & contrast are reasonably close, start by applying the Color Corrector filter to each clip. Use the Visual control (you will see the button when you apply the filter) and then use the Eye Dropper tool to set the white & black points in each clip. If the cameras weren't too mismatched this may be enough to correct the brightness mismatch. I doubt you will get a perfect match but hopefully close enough that it's acceptable.

  • How do you make report selection variant the default selection varaint?

    Hello all,
    I know how to create a Selection Variant for reoprts and I know how to create a User Variable that defaullts field values for a specific user.  But can anyone tell me how do you have a specific Report Selection Variant Default for everyone?  I know this one is probably staring right at me but I'm not seeing it.  Your help would be greatly apreciated.
    Thanks,
    Dan

    Bhatia,
    That will only hold the data for that specific user.  You can also do that via "user variables".  What I would like to know is how do you get it to be the default for All users.
    I am investigating the possibility of using t-code SE38 and changing the Values on the existing variants to contain the default data we'd like to see.  I'd much rather create just one Variant per report and have that be the default variant. 
    Anyone have any ideas?
    Thanks,
    Dan
    Edited by: Daniel Goodhart1 on Oct 7, 2009 11:03 PM

  • How do you make multiple folders in the photo app-

    the question speaks for itself.also, how do you sync multiple albums onto the phone?

    The way I sync folders is this (I know it may not be what you are looking for).
    But in iTunes you can pick a folder to sync to. For me I made a specific folder just for my iPhone.
    Any pictures I want on my iPhone I put in that folder (copies).
    And then in that folder you can create subfolders (to organize). Note though you can only go 1 subfolder deep. You cannot put a subfolder in a subfolder.
    So for example:
    C:\DATA\iPHONE This is the folder for my syncing.
    I can create
    C:\DATA\iPHONE\FAMILY
    C:\DATA\iPHONE\FRIENDS
    C:\DATA\iPHONE\ABSTRACT
    C:\DATA\iPHONE\NEWYEARSPARTY
    But I cannot create
    C:\DATA\iPHONE\FAMILY\WIFE
    Then you just put pictures you want sycned into them. Sort of better to work with copies and have a folder specific for the iPhone I think. At some point you will want pics removed from your phone and far easier to just delete them from the iPhone specific folder than if you went to route of syncing to the folder you actually store photos you want to keep forever on your computer. Having a specific folder with copies means you can delete and add at will and know your real memories are elsewhere.

  • How do you make groups after making the first one. I did that but after reentering couldnt make any other groups. Only had i group of 1 with icons down the right side.

    I want to make groups/ i made 1 group of 1/I went back & I had that group but couldnt make more/ I saw was page that hadnt been pinned yet as group/all other tab were shown on the right sid/I tried to pin the page that was shown in the tab group/then the one group(of 1) no longer showed up/Now I have a blank box with all the icons on the far right side.

    Wow!
    I'm not going to be of much use regarding answers but I sure am going to watching this post like a hawk for any replies. My package is a slightly diluted version of this and I do find the BBtalk and data limits hard to make the most of as well.
    If nothing else this totally highlights how complicated BT have managed to make their packages.
    A cynic would assume that they are trying to catch us out at every step and for us to either be overspending or not really getting the moneys worth.

  • How do you make a playlist on the Zen Mic

    I can't figure it out, whenever I try to make a Playlist it adds all the tracks on my Zen to the list. What the proper way of doing it without having to delete all the songs from the Playlist?

    are you talking about an on the go playlist or using some kind of software? The on the go playlist is explained with a sticky at the top of the forum.

  • How do you make square brackets with the keyboard on this thing?

    Needed for Matlab!

    Yeah, I figured as much but thought if you knew where it was on the US keyboard it might help you find them on yours. Guess that doesn't work.
    OK, then open the International preference of System Preferences. Click on the Input Menu tab (rightmost tab.) Check the box to display the Keyboard Viewer. You should now have a menu bar item for the Keyboard Viewer. When you select, it should open the viewer so you can find the location of the keys for the brackets. I "assume" it will be in French but I'm not sure. Obviously I don't have a French keyboard to test this out.
    Hope this helps.

  • UCCE 9 - How do you make Side B of the duplex pair the master rather than Side A

    Hi all,
    I have a customer with a Duplexed UCCE 9 install that is running from two geographically independent Data Centres.  So for example Side A is in DC1 and Side B is in DC2.  Side A is making the final routing decision whilst in normal operation.  From memory I believe that the amount of PGs the Router registers has an impact on the fact that Side A is seen to be the master in the decision making process.
    On Side A (DC1) the PG numbers look like this
    PG1A - CTI OS, CUCM
    PG2A - Finesse PG
    PG3A - CVP
    PG3B - CVP
    On Side B (DC2) the PG numbers look like this
    PG1B - CTI OS, CUCM
    PG4A - CVP
    PG4B - CVP
    DC1 is currently the Prime site for processing of the customers estate, with DC2 acting as the back up/DR Data Centre. The customer wishes to change the Data Centre priority around so that DC2 becomes the Prime site with DC1 becoming the back up/DR site.
    To achieve this and make Side B of the platform the master decision maker, what is the best approach?
    Many thanks in advance
    John

    Hi John-
    Here is the link to the UCCE Design Guides that David was talking about:  
    Cisco Unified Contact Center Enterprise Solution Reference Network Design, Release 9.x   
    http://www.cisco.com/c/en/us/support/customer-collaboration/unified-contact-center-enterprise/products-implementation-design-guides-list.html
    DJ

  • When typing in a URL in an outgoing e-mail how do you make it clickable for the recipient

    When I send an e-mail to a friend and I use Internet Explorer I can include a URL in the body of the message that turns blue and is clickable by the recipient.ie:he easily reaches the website.
    In using Firefox I can type the same URL in,it doesn't change
    color and the recipient has to enter it in some other fashion in order to reach the website.

    It sounds like the album metadata is incorrect, or differs from song to song in iTunes.  Albums with various artists will play properly assuming all the songs are tagged with the same identical album name, as well as the track number.  For the Halo 2 Soundtrack, metadata should look like this:
    Song: <Song Title>
    Artist: <Song Artist>
    Album: Halo 2, Vol. 1 (Original Soundtrack)
    Genre: Soundtrack
    I had a similar problem with my imported Cowboy Bebop albums and the mixture of artists/album names.  Once I adjusted the metadata, all of them play in the correct order just by selecting the Album from the available list or in Coverflow.

Maybe you are looking for