How does the quality of service in India compare to the United States?

I am currently in India and 12 hours from the closest Apple service center in Delhi.  After the monsoon rains started my computer started acting up.  At first some keys seemed to stick and I was able to solve the problem by attaching a USB keyboard.  Lately the computer started crashing and then having trouble starting up again (an internet search suggests this could be a problem with the RAM).  If I left the computer for a while it would start up and operate well for a bit but eventually crash again. 
I took the computer into a computer repair shop here and he said that I should wait (3 months) until I go back to the United States rather than go through the trouble of traveling to Delhi to get the computer repaired.  He also said that the quality of repairs is much better in the US.  For example, in India they will put in second hard refurbished hardware whereas in the US they will use new hardware.  The repairs in India will also take much longer than it would in the US.  He recommended I get a cheap PC from him to use while I am here and get my mac repaired when i get back to the United States, he would then buy the computer back when I left.
I was wondering if anybody could share their experience or knowledge of the quality of service in India.  Thank you.

And another quote from the fine manual:
Re Slideshow:
Rendering Preview Images
Aperture renders preview images in four situations:
When a library is upgraded—provided that the “Create previews for existing images” checkbox is selected in the Welcome to Aperture dialog
When an image is imported, or a version is created, rotated, or adjusted—provided that the Maintain Previews item is selected in the Library Action pop-up menu (with a gear icon)
When you Control-click the library, a project, or an image selection and choose Update Previews from the shortcut menu
Immediately before a slideshow, if the previews are not up to date, and the slideshow preset uses the Best quality setting
When rendering a group of preview images, Aperture uses the current application preference settings for compression quality and picture size, not the settings that were specified when preview rendering began. For example, if you have the quality set to 6, and then halfway through rendering you change the setting to 8, the previews that have not yet been rendered will be compressed at setting 8. Previously rendered previews are unaffected.
So, a high quality slideshow will require high quality previews, and indeed Aperture will render previews before rendering a slideshow, if the preview quality is not sufficient.
Regards
Léonie

Similar Messages

  • How does one add a personal recorded M4R file to the ring tones in the UK system for iPhone 3GS

    How does one add a personal recorded M4R file to the ring tones in the UK system for iPhone 3GS.
    I have tried all sorts of ways of adding my personal M4R file but can't find the place (within the UK versions of iTunes} to transfer this file so that I can select it as a ring tone.
    I've tried also changing to the US version of iTunes and still can't find a way of doing it, although I have heard that it can be done.

    You should be able to just drop it into the library within iTunes.
    http://cnettv.cnet.com/create-free-iphone-ringtones-using-itunes-8-0/9742-1_53-5 0003920.html
    Check out the video above for a lot good info. The ringtone must be less than 35 seconds.

  • Quality of service (QOS) is disabled in the HTTP service.  Unable to tur...

    Hi,
    "Quality of service (QOS) is disabled in the HTTP service. Unable to turn on QOS features." this message is seen and server restart itself. Why this occur?
    Thanks..

    That message is logged when you have QOS disabled. Check http://docs.sun.com/source/817-1831-10/agsnmp.html#wp999778 for information on enabling QOS.
    However, the server should not crash/restart. Please describe the steps to reproduce the problem.
    Message was edited by:
    Arvind_Srinivasan

  • SAP PI: the quality of service EO vs. EOIO

    Hello all,
    I have a service (File -> XI -> RFC). If i use the quality of service "EOIO" in the file sender channel, the data from xml file could not be imported in backend system per RFC-call. If i use "EO"-Settings then the data could be saved in backend system without problem. Could someone tell, what is that problem? thx.
    Best regards,
    Fanglin

    Hello Harisch,
    i have read the discussion und tried to delete the messages using the following methods. It didn't work:
    1. the report "RSXMB_CANCEL_MESSAGES": the message with Message-ID could not be found
    2. the SMQ1, SMQ2 und SMQ3: the EOIO-Queue could not be listed.
    In RWB there no options to cancel (or delete) the messages. I can only restart the first message:
    Best regards,
    Fanglin

  • How does QoS work with WAAS WCCP? What's the interaction between QoS Traffic Classification and WAE Traffic Application Policy?

    How does QoS work with WAAS WCCP? What's the interaction between Router QoS Traffic Classification and WAE Traffic Application Policy?

    By default, WAAS preserves the DSCP marking on intercepted packets.  There is a configuration option to set/override the DSCP value at the global (device), application, and classifier levels.  Currently WAAS provides marking only.  There is no action taken by WAAS based on the DSCP value.
    Regards,
    Zach

  • How does one set up two different iTunes accounts on the same computer so that they do not merge into one?

    How does one set up two different iTunes accounts on the same computer so that they do not merge into one?

    mparker402 wrote:
    So, when the other iTunes account needs to be used, I should log out of Windows and have the other user log in under a different Windows account, correct?  
    M Parker, 
    Yes, since you are trying to keep things separate, that is exactly what you would do.

  • Why is the quality of movies and pictures exported to the external hard drive lowered?

    Why is the quality of movies and pictures exported to the external hard drive lowered?

    Are you speaking of manually moving these files, or using an application to export?
    When you use the the term "export", it usually entails an application performing some kind of file conversion, rather than a simple transfer. It is during conversion to another file format that information may be lost through lossy compression, or by settings of the export.
    Anytime you convert a file to another format, there will usually be some loss or degradation. Tghis can't be helped, as one format may not support every information characteristic the original one did.

  • Is there any diffrence in quality between apple products  that is buy from united states or one that i buy from Emirate?

    is there any diffrence in quality between apple products  that is buy from united states or one that i buy from Emirate?

    Not from this Forum .This is a User to User technical support Forum .There is no relevant Apple presence here
    All iOS devices are made at the same factories in China for world wide distribution .
    The only difference is that some Middle East governments forbid the shipping of devices with Facetime and Apple are required to remove it from shipments to certain Countries

  • How does this New iPod Service Work?

    I ran across this article today...
    DOWNLOADABLE RECIPES
    The iFood terminal at Nordiska Kompaniet's food hall lets customers hook up their iPod and download audio recipes.
    The process is described in five simple steps (we couldn't resist including the
    Swedish original): 1) Docka - Plug in, 2) Ladda ner - Download, 3) Handla -
    Purchase, 4) Lyssna - Listen, and 5) Laga - Cook. After choosing from a wide range of recipes and downloading audio instructions to their iPod or other mp3 player, shoppers can purchase all necessary items from a colour-coded deli area."
    Can anybody tell me how this works? Doesn't there have to be an iTunes interface? If there is separate iTunes interface for this service, wouldn't it overwrite everything that is on your iPod and replace it with just these recipes. The service is kind of cool...but how does it work?
    MS

    Probably has a custom interface and communications program which allows you to pick the recipes and dumps them onto the iPod.
    Wouldn't be too difficult to do. All the iPod managers do something similar (Yamipod, iPodcopy, iPodip) but they do it to and from the iPod.
    This would be one way to the iPod only.

  • How does one transfer publish services configuration to a older catalog?

    Hello!
    An early suggestion from LR gurus & advisors was to set up separate catalogs as to not create an overly large therefore slow catalog.
    LR3 established the published services ability which surplanted previous plug-in services that I'd used from their onset.  (Thanks again Jeffery and others!)
    While there was a hill to climb with publish services - normal in most transitions -,  having gotten there, publish services has helped work-flow.
    Unfortunately, there seems to be a hitch as when one opens earlier catalogs the publish services have to be re-configured.  There does not seem to be any discussion or instruction as to easily transferring the settings or configurations for publish services to other catalogs.  Any thoughts other then configuring each different catalog?
    I need to pull files from LR cats that go back to V1 (yes, I know how to update them - that's not the question.) and I have about 25 catalogs to visit and work which is a bit of updating for publish services.  Btw, I keep a file card (written on a paper card no less!) to follow what is in each cat as there does not seem to be anyway to output an index of libraries. But the query here is publish services.
    Thanks for your thoughts and interest.
    Shutter On!
    Dan

    I frequently see this advise on the forums, and I would love to follow it, but it just doesn't seem realistic.  I have LR 3.2 set to backup (and optimize) the catalog every time I quit.  Since the catalog contains all the work I put into my images after I take them, I consider these backups as important, if not more so, than the separate backups I make of my raw images.  The catalog backup takes several minutes on my existing big catalogs, I can only imagine how long it would take if everything was in one catalog.
    I create a new catalog for each year, but I also have a "Processing" catalog, which is where I import new photos.  I do all my processing in that catalog, which typically only has a few thousand image (even when I have a backlog to process).  When I'm done developing a shoot and have complete my "standard" export tasks, I switch to my current year catalog, and use import-from-catalog to get the images into it.  I switch back to the processing catalog and remove those images from it.
    Am I missing something?
    How long does it take to optimize/backup you 500k catalog?
    Thanks.

  • How to make PDF file size smaller from an Illustrator file without changing the quality or size (length and width) of the file?

    Is there a way to make a 30x42 size (40 GB) Illustrator file as a PDF but make the file smaller in size (able to email to clients) with out compromising the quality of the file or the size of the file?

    If you are working in RGB you can embed a colour profile. Embed ICC Profiles is one of the Acrobat save options. It will increase files size dramatically.
    When you save your pdf you can choose the compression method for placed images. Default is ZIP which is really no compression at all for pixel images. Instead you should opt for JPG compression (of varying degree according to how sensitive the images are to compression).
    You should also examine the other Acrobat save options. To minimize file size you should not have any of the options checked (Preserve Illustrator Editing Capability, Embed page Thumbnails etc. etc.).
    40 gigabytes for a file like the one you show is ridiculous. Did you maybe embed the placed images? If so, don’t. Keep them linked unless you really need to embed them.

  • How does one get i movie to open . . . the "pinwheel" just keeps spinning

    How does one get i movie to open? The pinwheel is in a perpetual state of spinning.

    Hi,
      mFulErr                       = -41,  /*memory full (open) or file won't fit (load)*/
    At the Apple Icon at top left>About this Mac.
    Then click on More Info>Hardware and report this upto but not including the Serial#...
    Hardware Overview:
    Model Name: iMac
    Model Identifier: iMac7,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.4 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 6 GB
    Bus Speed: 800 MHz
    Boot ROM Version: IM71.007A.B03
    SMC Version (system): 1.21f4

  • How does one use Sound sticks while using HDMI at the same time ??

    How does one use Soundsticks while using HDMI at the same time ??

    Hi Caleb,
    This isn't a precise answer but a possible workable solution. SoundSource puts a menu extra which allows you to switch input/output and has an option for Auto-Switch to Headphones. The auto-switch feature doesn't work with USB headphones but I believe it will with 'regular' headphone plugs such as you use.
    http://www.rogueamoeba.com/freebies/
    (Oh, did I mention it's free Universal and works with Leopard?)

  • Does the ipad reduce the quality of photos that are imported using the SD to lightning connection kit?

    Hi everyone. I'm hoping you can help.
    I'm currently travelling and my intention is to take photos using my camera, import them to my iPad using the lightning to SD connector and then upload the photos to cloud storage for safe keeping.
    The problem I've found is when I import photos to my iPad the file size, and therefore quality of the photos, is reduced. I know this because I have tested uploading the same photo to Mega.co.nz cloud storage using both the iPad and a Nexus 4 phone - the iPad uploaded the photo at file size 2.9mb and the Nexus uploaded the photo at the original file size of 5.8mb.
    Can this issue be resolved?
    Thanks in advance,
    Ben

    Sorry, issue resolved.
    For those that may be having similar problems, the issue is the Mega.co.nz app that was created for apple products. It's possibly a bug that means it either compresses the file or does not accurately record the file size. I will report the fault to Mega.
    Ben

  • HT4847 How does one prevent all email received from emigrating to the cloud at the time of receipt?

    How does one prevent all email received, from being sent to the cloud at time of receipt?
    leisurestreet

    Welcome to the Apple Community.
    That's how it's supposed to work, you can't stop it. If this isn't what you want you should get yourself a POP based email account.

Maybe you are looking for

  • A/P F110 Payment via company code in a different country

    The client is a service organization where the Vendor data is managed in the US company code (US01) and the Customer data in managed in a Swiss company code (CH02). Many of the customers could also provide services and the invoices are posted to vend

  • Pre-programmed labs

    Why does HV not have pre-programmed fields for extremely common blood tests such as the CBC, the Comprehensive Metabolic Profile, and Urinalysis  like it does for Blood Glucose and Cholesterol measurements? It's extremely cumbersome to enter these va

  • Cash jouranl for business area wise

    Hi , can we create cash journal for each business area wise. If it so , can you explain configuration steps in precise wise.          For example ,  Company code have 8 business area. we need to create 8 cash journals or simply create 1 cash journal

  • Recommended mobile terminal for CalDav/SyncML

    Hi all, I was looking for a document (if any) reporting a compatibilty matrix between the different mobile phones (e.g. Nokia, Blackberry, Iphone) and their REAL (and I mean REAL) compatibility with the main functions that CalDav and SyncML protocols

  • Selected file system item could not be found

    I have an issue with a volume that seems unrelated to the other post to which I replied here. This particular volume is an extra slice/partition on the primary software RAID drive (simply made up of two internal drives). When I select the Volume from