How to change the colour of text property in Radio button?

Hello All,
I am having some radio buttons in my application. i want to change the colour of text property by default it is black.
Could any one please suggest me how to do it?
Thanks in advance.

Currently you cannot, it is a known (and hopefully reported, and at least addressed for next version) bug (or limitation, as they rushed to get the components out before JavaOne...).
People reported they just put an empty text and put a label beside the component. Ugly workaround (bad when the component will be complete) but if it works... :-)

Similar Messages

How do I change the colour of text in a cell in a JTable?

I am trying to change the color of the text in a single cell in a JTable. I have tried not adding a cell renderer and it changes the colour of text in all cells.
I have tried adding a cell renderer to the table and it does the same ie all cells text colour changes.
I am able to add a cell renderer to a column and it changes all the cells in the column.
I cannot figure out how to change just one single cell's text colour without effecting the other cells.

Ok, so if i create my own cell renderer do I set it as the default renderer for the whole table i.e.
table.setDefaultRenderer(MyCellRenderer, renderer);
Does this set one cell renderer for the whole table or is there an individual one for each cell?

How to change the "name of column" property of an text item in runtime?

How to change the "name of column" property of an text item in runtime?
I look the properties of items in help and found nothing about this!
It's possible?

Hi,
an other solution is change the block property QUERY_DATA_SOURCE_TYPE from "Table" to "Sub-query" , than change at run time the property QUERY_DATA_SOURCE_NAME.
First create block and add items
The QUERY_DATA_SOURCE_NAME will be for ex. "Select 'A' as col1, 'B' AS col2, 'C' as col3 from dual"
Set into items the column name property to col1 , col2 ...
At run time change the query to "Select 'Z' as col1, 'X' as col2 , 'Y' as col3 from dual"
in this way you can change the source of column value.
Caution because if you change value type from varchar2 to date you must cast date into varchar2.
May be that this way is valid only for view data not for insert-update, i don't remember.
bye
Message was edited by:
Killernero

May I know how to change the color of texts inside the indicator box?

Can anyone tell me how to change the color of texts inside the indicator box? I have tried to use property node but not really know how it functions.
In fact, I am writing a program for which the number inside indicator on front panel will show red color if the measured value can't reach the requirement. I am using LabView 6.1 Professional
Thank You for your attention!!!!!!

Simply use a property node with "NumText.TextColor" and wire the correct color depending on your test result.
The attached simple example (LV 6.1) lets you change it from the front panel. In your case, you would use your test output instead of a FP switch, of course. Message Edited by altenbach on 05-25-2005 09:05 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
TextColor.vi ‏18 KB

How to change the colour of chart in WAD.

Hi,
I have problem with web report. The web report with bar charts used to show with different colours earlier. Now when I execute the web report, the chart displays in single colour (All the rectangular bars in the charts are displayed in single colour say for example red). customer would like to see the chart with different colours. Please put some lights on it how to change the colour of chart in the report.
Thanks,
Sravan.

Hi Krish,
I have followed the steps which you suggested, but I am unable to see the changes when I execute the web report.
I could able to see the colour changes to the bars in the chart in the preview (i.e when I select the series 1 and change the colour for series 1 under Area properties). Like that I have done for all the 5 series, then I have clicked on Complete button, saved the web template and executed it, and I could able to see the changes in the preview but not in the report after execution.
I have two charts in my case, one is Job function chart and the other is Job type chart. The Job function chart is displaying with different colours from the begining, but the job type chart is displays all the columns in RED colour.
Is there any setting I need to do after selecting the colour at the series level.
Please correctt me if I am worng in doing the procedure.
Please update me how to do it...It is usefull if you can come back to me ASAP .
Thanks,
Saravanan.
Message was edited by:
 SARAVANAN PAYANI
Message was edited by:
 SARAVANAN PAYANI
Message was edited by:
 SARAVANAN PAYANI

How to change the output as text format in Apps R12.1.3

Hi All,
Currently iam trying to modify the Java Concurrent Program (FDExtractAndFormatting) in Batch Payment Process. This Program is generated in text format in 11i APPS. Now we are upgrading to R12.1.3. In R12.1.3 output is coming as PDF format. Here my requirement is how to change the output as text format in R12.1.3 also.
Please do the needful and suggest me.
Regards,
Jagadeesh

1. It is seeded java concurrent program. Some attributes are missing from 11i to R12. In 11i it is a text format.So i have to investgate on how to retrive those attributes in R12. What is the concurrent program name?
Have you tried to change the output and submit the request?
2. Once all are attributes are coming in PDF format. Client wants to open same output in text format as it is 11i (In R12 it is generated in PDF format).If the above does not help, please log a SR.
Thanks,
Hussein

How to change the logon page text colour?

Hi experts,
I need to do 4 changes in the logon screeen
1.the "user name" and "password " to "User Id" and "Pass".I have changed this in "umelogonbase.jar".
2.Change the colour of the two texts(white colour)
3.with black as background for the userid and pass label and textfield in the left side of the page
4.Also the background of the screen of the logon page with a company pic ;
I am following the below
http://wiki.sdn.sap.com/wiki/display/EP/ModifyingtheLogon+Page
Kindly help in this
Naga

When you follow the steps outlined at the Wiki page, what exactly is where you receive an error? You'll have to change the JSP page of the logon to insert your changes. Have you done this and the changes are not reflected?
br,
Tobias

How to change the colour of selected item in itemrenderer

Hello guys
please tell me how to change the selected image( which is in itemrender of tilelist).so that the colour sholud be shown within image not its outer part due to renderer.
Thanks in Advance
vineet sharma

Currently you cannot, it is a known (and hopefully reported, and at least addressed for next version) bug (or limitation, as they rushed to get the components out before JavaOne...).
People reported they just put an empty text and put a label beside the component. Ugly workaround (bad when the component will be complete) but if it works... :-)

How to change the color of text but only when that text is highlighted

I am NOT asking how to change the highlight color OR how to change the text color generally, but rather, how to change the text color as it shows onscreen while it is highlighted. Here's where I'm going:
Text is ordinarily black (assume) such as when the Finder is open or when viewing a list of all emails in an inbox.
Let's say I change the highlight color systemwide, in prefs > appearance > highlight color, to a custom color ("other") of black (for example).
In certain programs (mail, billings, iBank, addressbook, even the Finder), when I highlight a line of something, (like when I one-click on an email or a file name just to select it but not open it), the line will highlight in black, but the text of that line will automatically change to white so it can be seen.
However, when I highlight actual text (click and drag or double click), such as when editing a document in Pages and selecting a word, line, paragraph, editing an email, etc., the highlight is black, and the text remains black also, which means it cannot be seen (black on black).
So, how do I change it so that when I highlight the actual text the text color changes to white, then when it is de-selected, it goes back to black.
I'm not afraid to do a little terminal/command line, but only if it’s a little. Hope this gives enough detail.
Thanks.

You can use span HTML tag.
For example, if your label is "Product Name", and you want it to appear in red, you can type this:
Product NameHope it helps.
Ravi

How to change the colours of squares in ical

How do I change the colours of squares (that show days) in ical?

How do I change the colours of squares (that show days) in ical?

How to change the stsndard selection text for a LDB..

Hi All,
 I am using a LDB selection screen. I want to change the selection text of the standard selecetion field.
For ex, for LDB- PNP, i want to change the 'Personnel number' text to 'Employee ID'...
Please let me know how to do this.
Regards
Nanda

Hi Nanda,
Here is the code which is exactly suitable for this req.
TABLES: pernr.
data: i_tab type standard table of RSSELTEXTS with header line.
initialization.
i_tab-name = 'PNPPERNR'.
i_tab-kind = 'S'.
i_tab-text = 'Employee ID'.
append i_tab.
CALL FUNCTION 'SELECTION_TEXTS_MODIFY'
EXPORTING
 program = 'ZESO_TEST'
tables
 seltexts = i_tab
EXCEPTIONS
PROGRAM_NOT_FOUND = 1
PROGRAM_CANNOT_BE_GENERATED = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks
Eswar

How to change the colours of a vector patterned image?

Hello ,
I downloaded a vector , in both jpg and gif format today. I saved it down in Illustrator as a new swatch.
I was wondering if anyone knows if it is possible to change the colours in that vector/swatch?
As its jpg or gif , i am not sure whether it can be done.
Your help is much appreciated.
Lola

Just by way of hopefully-helpful general info:
I am not familiar with .eps....
Both EPS (Encapsulated PostScript) and PDF (Portable Document Format) are "meta formats." They are really not all that mysterous. Just think of them as mere "containers"--locked boxes which can contain any combination of individual vector-based, raster-based, and/or text-based objects. So merely saying you have an EPS or PDF file doesn't really tell anyone what you're actually dealing with, because saying that alone doesn't tell what kind of graphic objects the file actually contains.
Both EPS and PDF exist to "pass through" or "pass between" various softwares and/or devices graphic information which would not likely be "understood" if delivered in the native code of the program(s) which created the actual graphic objects.
Illustrator (like other similar drawing programs) is originally and primarily a PostScript-generating program for print. Both EPS and PDF are deeply related to PostScript. So programs like Illustrator can "unlock" most EPS and PDF files to get at the actual, individual objects they contain.
As already briefly mentioned, JPEG (Joint Photography Expert Group) and GIF (Graphics Interchange Format) are entirely raster-based image formats. They are just different ways to encode a single raster image in a compressed file. Both of them use "lossy" compression algorithms--to minimize the file size, they actually throw away data detail when they can. So they most often actually degrade the original (in what is hopefully "negligible" ways). So think of a JPEG (often shortened to JPG) or GIF as a single raster-based image object. A JPEG or a GIF are just two of the kinds of objects which may or may not be contained within an EPS or a PDF.
So you didn't receive "...a vector , in both jpg and gif format" because neither JPEG nor GIF can contain vector-based paths. JPEG or GIF is often used to serve as a mere rough preview of the contents of an EPS or PDF. In fact, EPS files very often contain a JPEG or TIFF (another raster-based image format) image to serve as a crude substitute preview for programs or devices which otherwise would be unable to display the real contents at all.
I downloaded a vector...
Saying "a vector" is giveaway beginner language. You didn't "dowload a vector." 'A vector' is 'a direction.' You downloaded a vector-based graphics file (but not as a GIF or a JPEG). Vector-based graphics are graphics consisting of mathematically-described curves nowadays most commonly (but not always) defined as cubic or quadratic Bezier curves. Cubic Bezier curves are the kind created by most programs like Illustrator.
So what you downloaded is typical of a stock-artwork provider:
The actual full-fidelity graphics content (objects) in EPS and PDF "containers."
Separate "dumbed down" raster images of the content in JPEG and GIF formats; usually provided so you can use them as temporary place holders or preview references.
JET

How to change the colour of background

Hi,
I'm quite new to Oracle Reports.
Once I've created a report on a table by using the Wizard, where do I have to change the colour of the columns of the report? Or of the background as well?
Thanks!

Mark1970 wrote:
Hi,
I'm quite new to Oracle Reports.
Once I've created a report on a table by using the Wizard, where do I have to change the colour of the columns of the report? Or of the background as well?
Thanks!Welcome :)
Check left side color plate at Layout Mode.. (left bottom)
Hope this helps
Edited by: HamidHelal on Apr 5, 2012 9:23 PM

How to change the field label text in standard WD application

Hello All,
I have a requirement to change the filed label text in standard WebDynpro application.
Application Name: /SAPSRM/WDC_UI_DO_BIDDER
View: V_DO_BIDDER_SEARCH_C
I want to change the label text from "Last Name" to "Vendor Name".
Can anyone please provide me the possible options to change label text?
Thanks in Advance.
Regards,
Shyam

Thread closed...Found the solution ...

Change the colour of text

Dear expert,
Can we change the text colour of work center description ( field name: STEXT)?
Best Regard
pauline

Dear,
Thanks for the feedback. how bout if I bold the text. Can we?
I want to make the indicator for the work center that already inactive. maybe you guys have any idea about the indicator we can create so that other users know this work center is inactive without a must to open the detail.
thanks
Pauline

How to change the colour of text property in Radio button?

Similar Messages

Maybe you are looking for