How to configure the monitoring computer to see the Xserve Raid

Finally I got My Xserve RAID.
I mounted It using disk utility as a single big disk.
But i don't know how to use RAID Admin since no List of System on subnet is present.
How do i change these setting on the monitoring computer?
I can write to the Xserve and i can read from it but I cannot use RAID Admin.
The fibre Channel utility is working well, do I have to change the setting of the PCI card?
I'd like to leave It as a single 2.7 Tb disk RAID 5, but sliced in smaller disk (Lun ?)
Please Help.
Thank you in advance
umberto

Now IT is Buidilng the Raid 5 across all the 7 disk. I unmount it from the desktop and shut It down via Raid Admin
Building a RAID 5 array takes hours. You can't shut the RAID down while it's doing this, otherwise you will lose the array settings.
I removed the older system and I added a new one that It has a different IP.
Once you connect with RAID Admin you should change the XServe RAID's configuration so that it has an IP address you can remember. If you leave it set to DHCP then it will probably change addresses every time you start it up.

Similar Messages

How to configure the database monitoring (DBA Cockpit) after Support pack

Hi,
I did the Support Pack Upgrade for BW system and i ran SGEN as well, now i need to configure the database , could you please suggest how to configure the database monitoring (DBA Cockpit) after Support Pack Upgrade.
Server is MSSQL , Component is SAP NetWeaver 2004s and OS is Windows NT.
Plesae suggest.
Chandu.

Hi,
You are right. SAP delivers this functionality from SP-12. So when you have applied the SP-12, you must have done these config steps to enable the DBA Cockpit.
If you have done these steps earlier, So you must have DBA Cockpit enable right now and putting extra SPs like 13, 14 and so on, should not be a matter.
Now if you have not performed those config steps before, Please do them now and you will be able to use DBA cockpit.
Please understand that SP12 is the base to run DBA Cockpit.
With Regards,
Saurabh

In warehouse how to configure the WAM

hi
in warehouse how to configure the wam how to define the variant can hoe to see the trafic lights convert from red to green.

follow the link to the docu: It is described in detail:
http://help.sap.com/saphelp_46c/helpdata/en/34/72369adc56d11195100060b03c6b76/frameset.htm
At the menu on the left open Planning and monitoring, then open Warehouse activity monitor.

Multifunction printer - how to configure the scanner

Hi,
I just finished installing a multifunction printer - Canon Mx 310 to the print server using a computer with Win 7 (64bit).
The printing option works perfect. Now I need to configure the scanner option, since I get an error that no scanner is connected when trying to use the scanning option.I connected the multifunction printer directly to the computer and I am able to scan.
Can someone guide me in how to configure the print server so the computer can detect the scanning port.
Thanks

I will try the software at the page you linked to. I am in a similar boat, in that one of my machines is Windows 7, but the utility on my XP machine doesn't see the print server even though it's there and can be accessed on the network as a printer by both machines.

ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (ex., 5 min) using the SLA?

I have ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (for example 5 min.) using the SLA monitor?
Or as something else to implement it?
My configuration for SLA monitor:
sla monitor 123
type echo protocol ipIcmpEcho IP_GATEWAY_MAIN interface outside_cifra
num-packets 3
timeout 3000
frequency 10
sla monitor schedule 123 life forever start-time now
track 1 rtr 123 reachability

Hey cadet alain,
thank you for your answer :-)
I have deleted all such attempts not working, so a packet-trace will be not very useful conent...
Here is the LogLine when i try to browse port 80 from outside (80.xxx.xxx.180:80) without VPN connection:
3
Nov 21 2011
18:29:56
77.xxx.xxx.99
59068
80.xxx.xxx.180
80
TCP access denied by ACL from 77.xxx.xxx.99/59068 to outside:80.xxx.xxx.180/80
The attached file is only the show running-config
Now i can with my AnyConnect Clients, too, but after connection is up, my vpnclients can't surf the web any longer because anyconnect serves as default route on 0.0.0.0 ... that's bad, too
Actually the AnyConnect and Nat/ACL Problem are my last two open Problems until i setup the second ASA on the right ;-)
Regards.
Chris

How to configure the runtime and consolidation for a track in CMS.

How to configure the runtime and consolidation for a track in CMS.
I can see the track exists in CMS but the same doesnt pull up in the NWDS in the development configuration perspective.
I compared the given track with the one which gets pulled up in NWDS. Theres something called runtime system and consolidation which isnt defined for the track which is invisible.
Please advise , what are these required for. And how can we configure the same.

The runtime systems are defined for a track to setup the Transport path for any code changes....the Consolidation system is usually defined as a Virtual system for the track and used for comparison and fixing any broken or Dirty DC's ....that means it's not used as a Runtime System for Deployment as compared to DEV,QAT and PROD used for Deployment...
Hope it helps..
Regards,
Shikhil

How to configure the services(WDA) in ESS with EHP7

Hi Experts,
I have a requirement to configure ESS/MSS in R/3 . fisrt time am going to configure the ESS/MSS in R/3 with EHP7.currently we are using
ECC6.0 EHP7 with SP 2 and portal 7.4 can any one help me out which business functions need to be activate and which components need to activate.
How to configure the service in launch pad with WDA.please guide me the step by step procedure.
Please share the config guide if anyone have.

hi sap scn ,
Tips & Recommendations for customizing ESS Menu (WD ABAP) - ess launchpad
Summary of configuration options in ESS Personal Information scenario -personal information
go to t-code lpd_cust see ROLE ESS and INSTNACE MENU ...Clcik it and copy to Z launchpad and drag and drop the services which u want and use it
if any other revert back again

How to configure the use of WS-RM in "PI 7.11 EHP1?

How to configure the use of WS-RM in "PI 7.11 EHP1?
Currently in the editing window of the communication channel (adapter type WS), I can not see any options regarding Reliable Messaging protocol (WS-RM).
The scenario that is required is as follows.
(Consumer WS-RM) -> (Provider WS-RM PI 7.11 EHP1) -> (ABAP Proxy Backend NW 7.0)
I would greatly appreciate any help,
Thanks,
Roger.
Edited by: Roger Solano on Apr 7, 2011 10:31 PM

WS adapter supports WS Reliable Messaging. But WS adapter is used to communicate between two SAP web service runtime.
Check this blog and its links for understanding direct connection or point to point communcation using WS adapter
/people/william.li/blog/2008/02/13/point-to-point-connection-using-abap-in-sap-using-pi-71
Hoe that helps.

How to configure the .EAR to the OC4J server step by step ?

I have configured the JavaBean of the OC4J server with the following step:
1.create the eosp.ear with the JDeveloper's wizard
2.copy the eosp.ear to the OC4J Server with the Path:
J2EE_HOME/applications/
3.modify the server.xml and add the following words:
<application name="eosp" path="../applications/eosp.ear" auto-start="true"/>
4.restart the OC4J server and show the information:
Auto-deploying eosp (New server version detected)...
5.create the new JSP and this source code is:
<%@ page import="com.beautybeard.eosp.common.*"%>
<%@ page import="com.beautybeard.eosp.constant.*"%>
6.visit the JSP and show the error information:
Error parsing JSP page /eosp/usr_profile/login.jsp
Syntax error in source/eosp/usr_profile/login.jsp.java:5: Package com.beautybeard.eosp.common not found in import.import com.beautybeard.eosp.common.*; ^/eosp/usr_profile/login.jsp.java:6: Package com.beautybeard.eosp.constant not found in import.import com.beautybeard.eosp.constant.*; ^2 errors
why?
why can not find the package?
please help me out

Hi Sky-
It looks like you have a web application only.
You need to create a war file as described above. A war file is a jar'd file containing your web components, including your javabean class files, etc. JDeveloper 9i can do this for you. You've already done the hard work. Suppose that the project you have created that contains your javabeans, etc in JDev 9i is called myproject (with myproject.jpr as the project file). Right click on the myproject.jpr in the JDev navigator and select 'new...', go to Deployment Profiles and select J2EE Web Module (WAR File) - a general screen will pop up asking you to save the deployment profile (you can just use the default if you want). Once you select OK on that, you will get a screen that calls itself the J2EE Web Module Deployment Profile Settings. This is the screen that you can use to enter your information.
Your servlet and javabean classes will go into WEB-INF/classes subdirectory that you see to your left in this window. Simply select the WEB-INF/classes entry and it will display a list of your java sources (it will only place the compiled output in this directory - there is a toggle for it).
Once you have specified that your javabean and servlet classes go in this directory, you should be set. Go ahead and save / close. In your navigation screen under your project (myproject.jpr or whatever your project name is) you will see your files, jsps, etc and something called webapp1.deploy (if you accepted the default). If you right-click on that, you will get a menu that asks a number of things, one of which is to Deploy to EAR file. Select that entry and it will create an ear file for you. You can play with the various settings to change the name of the ear file, but that's about all you have to do. Once this is completed, you can put the EAR file on your linux box or wherever you want, adjust your server.xml and default-web-app.xml files and launch the app!
Good luck!
Ray
Hi,Ray
Thank you for giving me the detail information!
I'm sorry that I can not give the detail and clear problem ,which make you delusoried.
ok,now I give you my aim.
1. I will construct my application system with JavaBean(not EJB),Servlet,JSPs (linux+IAS+JDeveloper+Oracle8i database)
2. I will package business function with JavaBean. example:
* CheckLogin.java
package com.beautybeard.eosp.javabean.usrprofile;
import com.beautybeard.eosp.common.*;
import com.beautybeard.eosp.data.*;
import java.io.*;
import java.lang.*;
public class CheckLogin{
public CheckLogin()
//do nothing here
public boolean getCheckLogin(){
3. I will control the request and response with Servlets.
example:
*CheckLoginSevlet.java
package com.beautybeard.eosp.servlet.usrprofile;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.util.*;
import java.sql.*;
import com.beautybeard.eosp.servlet.*;
import com.beautybeard.eosp.javabean.usrprofile.*;
public class CheckLoginServlet extends DefaultServlet
public void service(HttpServletRequest req,HttpServletResponse res) throws IOException, ServletException
//use the JavaBean
CheckLogin cl = new CheckLogin();
if (cl.getCheckLogin){
res.sendRedirect("login.jsp");
}else{
res.sendRedirect("err.jsp");
4. I will display the result with JSPs:
example:
<%//login.jsp%>
<%@ page import="com.beautybeard.eosp.common.*"%>
<%@ page import="com.beautybeard.eosp.data.*"%>
5. I have success on running the above steps in the 9iJDevelper(pure java) environment(OS:Windows 2000 Server), and now I will move the JSPs ,Servlets,JavaBeans to the Server(linux) without the JDeveloper's deployment wizard.
how to configure the IAS to carry my point?
thank you!
Sky liu

How to configure the Integration Server Settins?

Hi,
I am doing a scenario like Idoc 2 File, I am passing parameter of Adapter Engine is a Integration Server, and when we generate a Idoc and send to XI system using TC: WE19. XI System is not picked the Idoc, and when i am checking RWB the Adapter Framework. Please Guide me how to configure the Integration Server setting.
Regards
Mohan

Hi,
did you checked the ur IDOC outbound status?
also check IDX5, whether it has reached XI system.
plz do check all ur settings:
1. Create RFC destination to XI in SM59 transaction
2. Create a port in we21
3. Create partner profile we20
4. we05- Idocs monitoring
XI Settings:
1. Create RFC destination to XI in SM59 transaction
2. Idx1 Port maintenance
3. Idx2 - Metadata maintenance
4. Idx5 All Idoc inbound and outbound messages
regards
Message was edited by:
Vijaya Lakshmi MV

How to configure the XI and PLM in discovery box

How to configure the XI (SLD, Integration repository, Integration Builder ) in SAP discovery system.
And also i want to configure the PLM and xRPM within R/3 of discovery box.
Regards,
Nilesh Damle

Hi Frank,
well, first of all, your application provides log configuration information using an XML file at deployment time. This file is called log-configuration.xml (you can see the DTD description here: http://help.sap.com/saphelp_nw04/helpdata/en/48/ef8748caed894bb4b3ae953a60c592/frameset.htm). There you can set configure log controllers, which could be two types: location and category. So, you can specify your location and severity there. This is described here: http://help.sap.com/saphelp_nw04/helpdata/en/35/671c0136b4714c9e1b16b68211287b/frameset.htm.
Then, after the application is deployed, the log configurations you provided for it are registered with the Log Configuration tool I mentioned about. Using this tool you can later on modify your configurations at runtime (for example, change the severity level) without having to redeploy the application.
I hope it's clearer now? I guess it was me not getting your first question correctly that caused your confusion.
Greetings,
Ivo

How to configure the SOA MANAGER

Hi,
I having WAS 7.0, I created a service provider,for cosuming the service Im using SOAMANAGER transaction,
but the transaction doesnt exist in system.Please tell me how to configure the SOAMANAGER or there is other
way to consume the web ser servicr with out SOAMANAGER.
Regards,
Brahmaji

Hi,
If you want to consume a webservice. If you have the WSDL document. Then you dont need to config anything in SOAMANAGER.
All you have to do is. Go to SE80 select a package in the enterprise section you have create a new service consumer.
which eventually will create the Client proxy in which you see a class and methods created automatically for you.
After this you have to go to LPCONFIG where you have to create a port for created service. There you have give the PROXY class that just got created give a new logical port name.Once you are in then you have to give the URL that is specific mentioned in WSDL document.In the operations section you have give the SOAP action which is also mentioned in WSDL document.
Then in SE80 you can run the service with newly created port.

How to configure the iTunes,to display only folder name as Album.

How to configure the iTunes,to display only folder name as Album under Music.
I have a folder with name "English" under this I have plenty of folders which are either movie names or custom names created by me,inside of these are the music files. I just want all the files to be copied to the iPod with out any album artwork(which the itunes display under "Album By Artist" contains).The "Album By Artist" doesnt seem to contain just the folder name,it gets something else like the website from where the music file downloaded. This makes me irritating to browse through iPod or iTunes.
Please help me in configuring,so that I can just see the same folder/music hierarchy I see in my windows machine in the iPod.

Yep, I agree with Jurjen. It is not only limited to ACTVT, but rather fields of other objects as well which are "action" or "activity" related.
I would start the other way around - give them '03' only and investigate any transaction specific claims that it is not enough. There will be a few...
Cheers,
Julius

How to Configure the Netweaver CE UDDI Server and Registry

Hi,
I'm trying to configure the UDDI registry in Netweaver CE (trial version 7.1 SR 1) following the <a href="http://help.sap.com/saphelp_nwce10/helpdata/en/45/47e8e91587072fe10000000a155369/frameset.htm">SAP Help documentation</a>. But as the help is not detailed not sure whether I'm doing it correctly. I can access the Service Registry by http://<host>:<port>/sr but not sure whether everything is fine. Also I want to publish Enterprise Services in the registry. As it's not possible to do that from ABAP 7.0 WebAS (doesn't not support UDDI v3) I want to do it via the UDDI client. How to configure the UDDI client by providing the Inquiry URL, Publish URL, etc in the settings?
Please help me if anyone has any information regarding this.
Thanks,
Dipankar

I am working through the same issues and have not found all of the answers. However, this may get you closer.
See http://help.sap.com/saphelp_nwce10/helpdata/en/45/635dd614d73bdbe10000000a1553f7/content.htm for some physical destinations that have to be set up for Visual Composer.
You can also connect to the registry in NetWeaver Developer Studio by launching the Web Services Explorer from the J2EE Perspecive. See the help for more details.

How to configure the mail in Sales Support of SAP SD

Hi,
Experts I have one scenario in my co. that we have 300 users we have to send the mails to our 300
users for every 2 or 3 months once. Regarding new promotions (Discounts , Price changes) of
company. For this every time we are changing the sold to party in quotation and taking printouts then
sending to our users its a lengthy procedure, to avoid this long time very soon we are going to
implement SAP SD Sales Suppor in our company is there any functionality in SAP to send mail at
once to our 300 users may i know about how to configure the mail for this scenario.
Thanks and Regards
MH

Hi Prashant,
Thanks for you immediate responce, Can you give me the configuration steps in detail.
Thanks and Regards,
MH

How to configure the monitoring computer to see the Xserve Raid

Similar Messages

Maybe you are looking for