How to create a DVD with multiple video projects

I want to burn a DVD with several short video projects so that it will run without stopping in between.

Hi
*Play all resp one chapter at a time*
Play All Button
1. There are NO - Play All - button in any version of iDVD
2. It can be faked in several ways
• Easies and most fault proof way is to make a doublet movie containing All and with
Chapters set to match. It will take up x2 space but is easy to understand and produce.
• It's said that one can put all movies into a Photo/SlideShow and this will also
give the function of a Play All button - Never tested though.
• Using another program to do this eg. Roxio Toast™ where there ia a Play All button option.
Mike Evangelist1
You might be able to get close to what you want by using a slideshow in iDVD. (It's not widely known, but you can put videos in a slideshow.) If you set the slide duration to manual, playback will pause after each movie/slide, and you can continue with the 'next' button.
Yours Bengt W

Similar Messages

I need your expert opinion on how to create a map with multiple conditions.

Hello.
I need your expert opinion on how to create a map with multiple conditions.
I have a procedure (which i cannot import or re-create in OWB due to the bug), so i am trying to create a map instead :-(
How can i create a cursors within the map?
My function creates table and cursor.
Then it will have to check for duplicates in the tables (the one created and another table) - the criteria for finding duplicates is a number of fields.I then need to place few different conditions (if some attributes are not available) and it has to load cursor based on this conditions. The next step is to fetch the data into the cursor based on what attributes are missing.
The next thing it will do is insert the data into table (if record doesn't exist), output the error in separate table is record is corrupted, or update the record with changed information.
In short i need to re-create match / merge but with conditions, iterations etc 'built into' it.
I can read up on available functions - it's just what would be the best options? and what would be the best approach to do so?
In my function i use %rowtype - but cannot use it in owb - so what would be the alternative? i don't really want to create a lot of variables and then have a nightmare of maintaing it. are there any tips regarding this?
having looked through Oracle dedupe - it's not really what i need because it is just DISTINCT.
I would appreciate any help / advise on this.
Thank you very much

thanks a lot for your reply - i will look into this option :-)
it is a bit more complicated now as i have to re-create the match / merge and then somehow 'tweak' it to achieve the result i need.
At the moment i am looking to breakdown the package into smaller chunks 'functions' and try creating the map that way.
Anyway, thank you very much for your suggestion.

How does create a server with multiple Clients ?

Any people can lead me .
How does create a server with multiple Clients ?
Thanks

For a multithreaded server you will need a thread to listen and at least one thread per client. If the conversation is half duplex, one thread per client works very well, if it's full duplex you will find one thread to send and one to receive much easier to program.
I posted a Simple Socket Server that uses 1+2*clients threads.

How to Create a DVD With No Menu?

hi there.
i've had DVD Studio Pro for a while and never used it.
would it be to hard to give me a step-by-step guidance on how to create a DVD from a QuickTime file in DVD Studio Pro (initially, in the form of a VIDEO_TS folder or IMG file) with no menus at all, so that it's played straight away once inserted into a stand-alone DVD player?
anyone, please?

If you are starting in SD and can use compressor, that works better: there are more knobs to twist to adjust the results to your liking. Going from HD to SD, I think compressor or a third party encoder is a must. Just too many things to tweek to get it right for the video you shot.
AC3 has another advantage in addition to file size: bit rate. There is a limit on what DVD players will handle - usually less than 10mb/s. And if you can have video + audio well under that, you disc will be compatible with more players. If can always put both on the DVD, and use a menu to let a user pick one, but you don't want menus yet, as you said. Many music DVDs do just that: PCM for best fidelity (it is noticeable on a really high end system that most mortals don't have), or DD, even 5.1 for everyone else.
Encoding: I use 7.5mb/s max for video, and adjust the "average" depending on how big my video is; I've used as low as 4.2 for stage plays and it was not too bad. If you have a short video, you might use CBR (contstant bit rate) at 7.5 for the best quality. I likewise adjust my AC3 bit rate; 192 stereo where I must save space and the original sound quality was not great anyway, up to whatever the max is (384, I think).
Eddie O

How to create list items with multiple attachment files using rest api javascript

In one of user form I am using javascript rest api to create a list item with multiple attachment files. So far I am able to create list item and once created uploading an attachment file. But this is two step process first create an item and then upload
a file.
It create an additional version of the item which is not desired. Also I am not able find a way to attach multiple files in a go. Following is the code I am using.
createitem.executeAsync({
url: "/_api/web/lists/GetByTitle('UserForm')/items(1)/AttachmentFiles/add(FileName='" + aFile.name + "')",
method: "POST",
contentType: "application/json;odata=verbose",
headers: {
"Accept": "application/json;odata=verbose",
"X-RequestDigest": $("#__REQUESTDIGEST").val()
binaryStringRequestBody: true,
body: fileContent,
success: fnsuccess,
error: fnerror
So somehow I need to combine item attributes along with attachment files in body: param. I visited https://msdn.microsoft.com/en-us/library/office/dn531433.aspx#bk_ListItem but no success.
Appreciate any help.

Thanks Mahesh for the reply and post you share it was useful.
But this does not solve the core of the issue. You are uploading attachments after creation of item and multiple files are being attached in loop. This is kind of iterative update to an existing item with attachments. This will end up creating multiple versions.
What I am trying to achieve is to create an item along with multiple attachments in a go. No item updates further to attach a file.
Please suggest how this can be done in one go. SharePoint does it when one creates an item with multiple attachment.
Thanks for your reply.

How to create a table with multiple select on???

Hi all,
I am new to webdynpro and my requirement is to create a table with multiple selection on.I have to add abt 10 rows in the table but only 5 rows should be visible and moreover a verticalscroll should be available to view other rows.Can anybody explain me in detail how to do that.Please reply as if you are explaining to a newcomer.Reply ASAP as i have to do it today.
Thanxs

Hi,
1. Create a value node in your context name Table and set its cardinality to 0:n
2. Create 2 value attributes within the Table node name value1 and value2
3. Goto Outline view> Right click on TransparentUIContainer>Apply Template> Select Table>mark the node Table and it's attributes.
you have created a table and binded its value to context
Table UI properties
4.Set Selection Mode to Multi
5.Set Visible Row Count to 5
6.ScrollableColCount to 5
In your implemetaion, you can add values to table as follow:
IPrivate<viewname>.ITableElement ele = wdContext.nodeTable().createTableElement();
ele.setValue1(<value>);
ele.setValue2(<value>);
wdContext.nodeTable().addElement(ele);
The above code will allow you to add elements to your table node.
Regards,
Murtuza

How to create Item Codes with multiple Item Description

Hi,
for one of my client, we need to create Item Codes with multiple Item Description.
e.g.,
Item Code - M00285
Item Description 1 - Blue Paint
Item Description 2 - Red Paint
Is that possible in SAP Business One? If "Yes" kindly provide a solution. Else recommend an alternative method.
Regards,
Ammheya U. Naaik

Ammheya,
I just wanted to add that there is an Add-On that handles "Style, Color, Size" situations like yours.
It allows you to define a "master" item, (Paint, for example) and then setup the various styles, colors and sizes it comes in.
This creates sub-items for each with the master in the ItemCode (Paint-Blue, Paint-Red, etc)
It's called MatrixOne from Navigator. You could find it on the partner portal with other Add-Ons.
Hope thathelps,
Brad Windecker

How to create Interactive PDF with multiple .mp4 videos– without lagging on playback?

I'm creating a long document with no real effects-- just a "fade" transition from page to page-- and multiple videos. These videos are all formatted as .mp4s, and I have had no issues with the actual process of getting them embedded and playing back on export.
My real issue is that the videos are all extremely laggy on playback. Since this is a presentation document, I'd like to know if there are any options for making the playback a bit smoother. Each video, by itself, plays with no issues. Would the combined filesize of all the videos be causing this? There are about eight 30-second videos and one 2-minute video, which makes the filesize quite large.
Filesize is not an issue, so is there some way to completely embed the videos or create an external folder the PDF document can draw the videos from on playback...? Hopefully I won't be stuck with laggy videos.

My suspicion is that computer setup has more to do it than anything. How much RAM, whether other apps are loaded, what kind of graphics chip, stuff like that.
I don't know of a setting, though you can look at the Flash Player settings in Acrobat. There is certainly nothing in InDesign that would affect it.

How to create a DVD with 2 separate movies?

I'm a coach - and as I break down game film for my team, I'd like to distribute a single DVD with an Offensive film and a Defensive film, on a single DVD. Once I edit the original clips, I usually have about 20 minutes of offense, and 25 minutes of defense. Is it possible to open a DVD menu, in PE and just drag/drop my two films into the menu? I've already made the separate films - just can't find a way to put them on the same DVD - with separate launch buttons.
Please advise - thanks.
Coach B.

Coach B
In Premiere Elements, it is the placement of the menu markers at the Timeline level in Edit that is going to be the important first step. There placement at the Timeline level will determine how they are represented (linked to) the buttons in the menu(s). The menu markers for this are going to be main menu markers and stop markers as per details.
1. Setting up the Timeline.
Place a main menu marker at the start of the first file of Offense Section.
Place a stop marker at the end of the last file of Offense Section.
Leave a few frames gap between the end of the Offense and the start of the Defense.
(You cannot sit one marker on top of another)
Place a main menu marker at the start of the first file of Defense Section.
DO NOT place a stop marker at the end of the last file of Defense Section.
2. As shown in the blog post to which I referred you for background information, there are two types of buttons we could use for Offense button and Defense button on the main menu. Let us start with using just the thumbnail type button.
For now we will be assuming the end product as DVD-VIDEO Standard (4:3) on DVD disc.We will use the Sports/(AV)Extreme theme and do some file switching.
a. You need to get copies of the following files from the Program Data
sportchannel_pal_s_sm.psd
sportchannel_pal_s_mm.psd
They are copied at their saved located
Local Disk C
Program Data
Adobe
Premiere Elements
11.0
Online
DVD Templates
All_Lang
Sports
and in the Sports Folder are those two files cited above which you copy and paste to an empty folder that you created on the computer desktop.
b. Switch the file names so that the main menu has the scene menu design and vice versa. And, modify the names so that you do not mix up these modified files with anything else.
So, you want to end up with a folder name mysportchannel on the computer desktop
and in that folder are the two files who names you switched and changed.
sportchannel_pal_s_sm.psd is changed to mysportchannel_pal_s_mm.psd
and
sportchannel_pal_s_mm.psd is changed to mysportchannel_pal_s_sm.psd
Take the desktop mysportchannel folder with these modified files and place it in the following spot in the following path...
Local Disk C
Program Files
Adobe
Premiere Elements
11.0
DVD Templates
Common
and in the Common Folder place the mysportchannel folder.
When you go to select this theme in the Movie Menu customization of the opened project, look under the Slideshow catagory.
You should be looking at something like this in the Movie Menu customization area
Lots ot fine tuning yet to be done, detail wise.
1. Is your end product, DVD-VIDEO standard 4:3 or widescreen 16:9.
2. Do you want the music background that comes with the original main menu?
3. Do you want a Play All opportunity? This one allows for pick one or the other then return to the
main menu.
Please review the above. Do not hesitate to ask for clarification.
Thanks.
ATR

How to create a ListDefinition with multiple ContentTypes

Hi,
i need to create a list definition with two contenttypes. When is use the Visual Studio SharePoint ListDefinition from ContentType, i am only able to add one contenttype to the list. But i have two contenttypes. I don't know how to add them to a ListDefinition
(DocumentLibrary).
This is my Contenttype:
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<Field ID="{1D6C3BF2-5269-4892-B147-659A5EE36BED}" Name="MyChoiceField" DisplayName="MyChoiceField" Type="Choice" Group="MyBox" Hidden="False" Required="False">
<CHOICES>
<CHOICE>-/-</CHOICE>
<CHOICE>Choice1</CHOICE>
<CHOICE>Choice2</CHOICE>
</CHOICES>
</Field>

<ContentType ID="0x010100d7d016b413b244e8a6a185cf8b0afd3b"
Name="MyBox Document"
Group="MyBox"
Description=""
Inherits="False"
Version="0">
<FieldRefs>
<FieldRef ID="{1D6C3BF2-5269-4892-B147-659A5EE36BED}" />
<FieldRef ID="{fa564e0f-0c70-4ab9-b863-0177e6ddd247}" Hidden="TRUE" Required="FALSE" DisplayName="_hidden" />
</FieldRefs>
</ContentType>

<ContentType ID="0x012000cdce40c9703b4b5aa7a84044a040c005"
Name="MyBox Folder"
Group="MyBox"
Description=""
Inherits="False"
Version="0">
<FieldRefs>
<FieldRef ID="{1D6C3BF2-5269-4892-B147-659A5EE36BED}" />
</FieldRefs>
</ContentType>
</Elements>
Is there a way to create a minimal schema.xml with these contenttypes manually or what are the steps to build a listdefinition with multiple contenttypes?
Best Regards
Bog
Developers Field Notes | www.bog1.de

You can define them in the schema.xml of list definition.
<?xml version="1.0" encoding="utf-8"?>
<List xmlns:ows="Microsoft SharePoint" Title="Something" Direction="$Resources:Direction;" Url="Something" BaseType="1" xmlns="http://schemas.microsoft.com/sharepoint/" EnableContentTypes="TRUE">
<MetaData>
<ContentTypes>
<ContentTypeRef ID="0x0100707A19136D594D7784D9E30A5FBA58C1002D7898DEE60A4FDEBD3CD1EFAB442000" />
<ContentTypeRef ID="0x0100707A19136D594D7784D9E30A5FBA58C1002D7898DEE60A4FDEBD3CD1EFAB4427A000678E9CDB185C4DCEAC41F865393A1234" />
<ContentTypeRef ID="0x0100707A19136D594D7784D9E30A5FBA58C1002D7898DEE60A4FDEBD3CD1EFAB4427A0007A4D2F6526CA4D8F8B5AD2BD64C3A123" />
</ContentTypes>
<Fields> </Fields>
<Views> </Views> </MetaData>
</List>
--Cheers

How to create a dashboard with multiple prompts ?????

Dear All,
I need to design a dashboard with multiple prompts, which has been desined from webi.
Ex: i have a prompts of year,sales manager and promotions has prompts in webi report.
I am trying to create a dashboard on top of this webi report; i am also using live office.
how can i design this dashboard with mutiple prompts.
any doc's are links which is related to this topic will be a great help.
Thanks in advance.
Regards,
Suman

Dear Praveen,
Thanks for your suggestion; i hope we need some third party tool for multiple selection.
But i need to know which kind selectors i can use from the components for multiple selection.
question 1:
Ex:
I have prompt for year;
scenario 1: i need to filter the year by 2001,2002,2003.
or
scenario 2: need to filter the year by only one year 2001.
question 2:
I have created a dashboard on top of webi report; but i have filter for the year in from to value's.
Ex:
Year is from 2001 - 2009.
when i am enabling this prompt in xcelsius i cannot see from and to option; how should i design this one.
Regards,
Suman

How to create sales return with multiple invoices

Hi ,
I am creating a sales order return with reference of billing document using FM SD_SALESDOCUMENT_CREATE, if i give one Billing document as a reference document it is creating document perfectly.
But my Requirement is to create one Return sales order with multiple invoices.
I tried to pass reference document no's in Item level , but it take first reference document number only , for that reference document only return is creating.
Can you any one help me how to create this.
Thanks in advance
Swapna.

Hello Venkat,
As I know it is not possible to create a single return order for multiple invoices in the background.
It is possible in the foreground by following the below steps.
1) Goto VA01 --> enter the Sales order type and Sales area.
2) Press F8 or click on create with reference, provide the first invoice.
3) Now the main screen would appear, displaying line items from Invoice1.
4) Without going back, again goto path, Sales document -> Create with reference
5) Enter second invoice2. and the items from invoice2 will also appear in the Sales order line item.
------ Enter as many number of invoices by repeating the above step--------------------
6) Press save, so one sales order is created for multiple invoices.
Regards,
Thanga

How to create a DVD from several FCP projects?

I'm strugeling to create a DVD. I feel like a fool because it used to go so easy with my old computer but with my new Mac it doesn't seem to work.....
What I'm doing:
- Footage MTS 1920x1080, 24Mbps .MOD files
- I upload them from my camera into FCP
- I make projects (let say 20 different ones)
- I want to put all the projects on 1 DVD as seperate 'chapters/ icons'
- With FCP I can only put one project at the time on a DVD, so that doesn't work
- I bought DVD creater to put the exports of FCP on a DVD, problem I can not create a export out of FCP that will be recognised by dvd creater.
I know that I will be able to convert my FCP export into something else by some programme. But this is a work around, I don't really want to do such a extra step because the quality will be lower.
Ik hope someone has a solution for me!
Kim

Hello T,
I have just exported the slideshow from iPhoto to the iPhoto Slideshow Folder, opening iDVD.
I selected create a new project as EJ3 in MoMs folder hit CREATE and iDVD quit, disappears,
THE iDVD icon is still active on the doc but how ever it is simply GONE,
this is the second time i tried this. I will restart the computer and come back and try it again.
OK. I restarted the Mac, opened iDVD, selected MAGIC iDVD and in the movie section EJ3 was no where to be found.
I will now close iDVD and try create a new project, saved MY GREAT DVD to the desktop.
Cannot find EJ3 or the other exported iPHOTO slide shows under Elizabeth.....
they are here
but I can't select, or import, or open in iDVD.
I am totally lost and thinking that this can't be done for some unknown reason.
I am thinking if iMOVIE is the way to go OR if I should delete iDVD and reinstall it from the iLIFE disk.
I am sorry for all this failure.
at a loss right now.

How do i create linked pages with multiple video clips on each of them?

I took a bunch of small videos with my digital camera, and now want to make a dvd that has a main menu with 7 choices, and then each one of those will take you to pages with each clip as a motion button (6 to a page). So if i click on "Dublin" on the main menu, it takes me to Dublin #1 which has clips 1 - 6, i can then click on an arrow to go to a second page with clips 7 - 12, etc. I can return to the main menu and click on "Belfast" which takes me to the first page of 6 clips, then a second page with 6 more, etc.
The problem I am having is linking two or more Chapter pages together. Thanks for your help.
Eric

Welcome to the forums, Eric.
iDVD has a few limitations, but you can do much of what you want.
Limitations: Only 6 selections per menu page. And the Forward/Backward selection buttons advance only one menu at a time.
Basic solution: Use the folder button to create a link to a submenu; move to that submenu and drag your movies onto that menu page. Repeat for more submenus.
Alternative approach: Use iMovie to join all the Dublin videos, with chapter markers to designate each segment. Import the movie with chapter markers into iDVD and they automatically create the Dublin submenus. And you can watch all the Dublin videos in a row, or use the menus to navigate to the desired video. After you watch the last segment, you'll automatically return to the main menu.
John

How to create a group with multiple data fields

Post Author: RichS
CA Forum: Formula
Using CR XI. Using CSV input from ODBC text driver. No problems here.
There are 3 fields that I want the same group by action. Is this possible?)
If any one of these 3 fields change I want some header information and column fieldnames to display. The header information I only want displayed on the first page (on the change) and the column fieldnames to display on every page. I have played around with things like "InRepeatedGroupHeader" and "report group header on each page". I am not getting all the results that I am looking for though.
I want report to look like:
Page header stuff (to display on every page) This data consists of some fields that will have static data and will display on every page. And it consists of 3 non-static fields that I want to group on.
Group header stuff that I only want displayed on the first page on a change from one of the 3 fields mentioned above.
Column headings that I want displayed on every page.
Details data
Group footer stuff (details not important for this)
I get the expected output (column headings displayed on every page, and group header stuff display on the first page on each group change) with one group field. But I want the group change to happen for all 3 fields.
It seems simple but I can't find a way to create a "group" so if "field1 or field2 or field3" change, I get the same "group by" action. I just need to know how to get the expected action.
I expect that I might have some terms mixed up and/or some important information that would aide you in helping me. If that is the case please re-post and I will add any missing or mis-stated information.
Thanks,

Post Author: V361
CA Forum: Formula
I am slightly confused, but perhaps you can create a formula
Then group on the formula. If this is not what you want, could you post some sample data, with the desired results.

How to create a DVD with multiple video projects

Similar Messages

Maybe you are looking for