How to create a new track with existing changes in the production

Hi
I need to create a new track for the ESS package with the existing changes that we already made to the ESS package. We already have a development track and the customisation to the ESS package has been already done in that track. Now my requirement is to create a new track ( DEV, CONS, TEST and PROD) with DEV having all the existing changes we made. In short how do I import the SCA's from development track PROD to the new track DEV. We are on NW2004 SPS20.
points rewarded for helpful answers
Thanks
Sheril

Param
Have you done the import in DEV and CONS and then Assembled .. ?
If yes then go to /usr/sap/jtrans/CMS/archives/.......... -> check for the track name and then the last .SCA file in it . Copy that SCA file in the /usr/sap/jtrans/CMS/inbox and go to the new track and configure the checkin to inbox ... You should see the SCA in there ... check those in and you are ready to have those SCA in your Production track ..
If no then you need to know the NWDS functions .. I shall send you the details to bring the incomplete changes (not assembled) to new track .. let me know if the first one worked ..
Thanks
Rahul

Similar Messages

How to create a new file with existing file's resource fork?

Hello,
I would like to create a new file that has the resource fork of an existing file. I had though of making a copy of the existing file, seek to the beginning of the copy and write the new data, but for large files, that creates the whole file even when not needed. I currently create the new file with [NSFileManager createFileAtPath: contents: attributes:], but attributes do not include resource fork items, like custom icons, color label, etc.
[NSURL resourceValuesForKeys] gives a common subset of resource data, like icons and color label, but that's about it. Is there some way to get the resource fork or a copy of the file without getting the whole file?
Thanks

What are you trying to do here? While resource forks might still be quasi-supported, you really shouldn't be thinking about them as such. Instead, think in terms of extended attributes. You can use the low-level xattr() functions to get some of that or you can use the new NSURL methods.

How to create full new user with all privileges

how to create full new user with all privileges?
and how to delete existing users?
Thanks in advance..

Common solution is probably to use sudo for privilege elevation, wiki should help

When I create a new track for Guitar it labels the track "Clean Combo" no matter which amp I select. Anyone else noticing this?

When I create a new track for Guitar it labels the track "Clean Combo" no matter which amp I select. Anyone else noticing this?

Look at it this way: there is no need to record that effect onto the audiofile. This is a great advantage of modern recording, and this is how most DAW's work by default. Just leave the plugin on when playing back.
Only for CPU management reasons it may be advantageous in certain situations to either freeze a track or bounce it in place (both techniques will render an audiofile that may include the effect). But in general it is a (very) good thing that it is possible to tweak any effect after recording, and have a clean, unprocessed recorded signal to work with. And if the effect was perfect at the time of recording, well, just leave the plugin(s) engaged.
http://help.apple.com/logicpro/mac/10.1/#/lgcp8ae5826e
http://help.apple.com/logicpro/mac/10.1/#/lgcpf1cbfd51
ps: there is a way to record plugin effected signal live into the audiofile, but it involves creating a custom environment setup.

How to create a New Tranport Request for changed Extract structure

How to create a New Tranport Request for changed Extract structure ?
Hi Experts,
I have a FI AP Generic Datasource containing extract structure with appended fields.
It has already been activated and transported to Testing System.
Now, I am to create a new transport request for this DataSource and Extract structure.
I do not want to delete and recreate the Generic Datasource.
I am trying to look at the options in the extract structure top menu from where I can create a new Tranport Request.
Please let me know the steps
URGENT

Hi Dev,
Once you send the transport request for any data source from Dev to Testing you wont find that again in your Dev (I mean the TR). So, when you change anything for this data source or view now in Dev and try to save it, it will ask for a new transport request and here you can mention a new one starting from View then activate it and go to RSO2 regenerate it and use the same transport request for this too. When you transport this TR to Testing Environment the data source will automatically get changed.
Hope it helps...

How to create a new tag in page properties in the sidekick of geometrrix page

how to create a new tag in page properties in the sidekick of geometrrix pagesame as basic, advanced, blue print??

Hi prachi,
Is it tag OR Tab ? Seems like you are looking for Tab. Look at [1] & overlay to custamize per your need. Or define at your page component.
[1] /libs/foundation/components/page/dialog/items/tabs/items
Thanks,
Sham

How to create a new index with already indexed folder

Hi
I have a requirement to create a new index.
I can able to create index. But,When i am specifying the data source, i am trying to include a data source which was already indexed in another index.
The system giving error that "The folder is already indexed and its available in another index".
How should i specify same folder in different indexes?

Hi Patricio,
Thanks for your reply.
Our requirement is
From your example, lets take
index1 containts a data sources \folder1.
and i have a requirement to create another index called index2 with data sources
1) \folder1
2) \testfolder\testfolder1.
From help.sap.com i understand that there is no way to specify the same folder in different indexes.
I am looking for, Is there any solution to meet my requirement
Thanks

How to create a new document with a given theme, instead of choosing it every time.

Hi,
for work I only use a custom made keynote theme.
I've already deleted all the default themes, and the only one that is listed in the app is the one I actually use.
However every time I create a new document I have to chose its theme (that's normal having plenty of themes, but in my case is just a waste of time).
I was wondering if there's a way to tell keynote to start a new document with a given theme, in order to avoid to chose it every time.
Thank you for reading and for the help you will give.
Giacomo

Keynote > Preferences > General tab
select “Use theme,” and then click Choose to select a theme.

How to create a new Activity with report

I would want to know how I do to create a link in a report that connects me to the page of the Client to add a new record of activity if i want.
Substantially this link allows me to create a new activity in an agency that I directly select from the report.
Thank Vale.

Hi
You should use the observer user for performing read-only operations.
This is one of the users that is created when you installed AccAD.
Here is the section that mentions it from our administration guide:
You are asked to provide passwords for the root, admin, and observer
users. Make note of these passwords since you will be required to provide them later.
When the installation is complete, log out root and log on again as admin.
Important
Perform any additional operations using the secured admin account. You can use the observer account to access the AccAD Administrator web UI in read-only mode only; this user cannot log on to the machine.
Best,
Zeev

How to create an new administrator with ldif files

I need another administrator as orcladmin for create an new tree in OID 11g which groups and right must this administrator have?

Although you can create a superuser account that is able to manage entries, it won't be able to do so using ODSM until 11g Patchset 4.
What this means is that you may use ldapbind/ldapmodify/ldapadd/ldapdelete commands with this new user to do the same operations that you would normally only do using the superuser, but that until a future patchset (currently slated for 11g patchset 4), this user will not be able to login to ODSM.
Attempts to login to ODSM as this new user will fail with:
Error:
ODSM allows only super user to connect to OID.
Connected user is not a super user.
Identify the groups that the superuser is in, as follows:
ldapsearch -p <OID_port> -h <OID_host> -D "cn=orcladmin" -w <pwd> -b "" -s sub "uniquemember=cn=orcladmin" dn
Create a new user entry, to be used as the second superuser.
Add this user as a uniquemember to all the same groups returned in. This can either be done manually, or via the ldapmodify/ldapadd command with an LDIF file with the following syntax:
newadmin.ldif
dn: cn=odisgroup,cn=odi,cn=oracle internet directory
changetype: modify
add: uniquemember
uniquemember: cn=myadmin,cn=users,dc=myorg,dc=com
dn: cn=Provisioning Admins,cn=changelog subscriber,cn=oracle internet directory
changetype: modify
add: uniquemember
uniquemember: cn=myadmin,cn=users,dc=myorg,dc=com
ldapadd -p <OID_port> -h <OID_host> -D "cn=orcladmin" -w <pwd> -f newadmin.ldif
Thanks,
ABP

How to Create a New Admin Account and Change Original to Standard Account?

I have a single user admin account that I set up when I got my PowerBook. Now I want to have two accounts with the new one being the admin account. This way I can leave most of the data files, email accounts, etc. with the old account and use the new one for personal data and admininistration. Then I could give out the password for the original account without fear that a user could change permissions and get access to the new account with the personal data. Can I create a new admin account and then change the original account to "Standard" instead of "admin"? What problems will this create?
PowerBook G4 Mac OS X (10.3.9)

i2:
Not sure if you are asking if or how. Templeton has
answered if. Here's how.
Apple Menu > System Prefs > Accounts. Click on the +
under User Options to create new account. Go to
Security and check box at bottom to make account
admin. You can take care of the other items, picture
etc, login options etc.
To make the other account Standard select the
account, go to Security and deselect box "Allow User
to Administer".
Hope this answers your questions.
Good luck.
cornelius
PismoG4 550,
100GB 5400 Toshiba internal, 1 GB RAM; Pismo 500 OS
(10.4.4) Mac OS X (10.3.9) Beige G3 OS
8.6
Thanks, I'm tying to find out if I will run into problems, such as not being able to use the new admin account to change permissions in the old.

How to create a table report with alphabetic link at the top

Hello,
I have a db table of users, and have created a report based on this table, however I want to have each aphabet letter at the top of the report so that users can click on the letter and see all records where the username field starts with that letter.
How can I achieve this?
Thanks,

Hello user11243298 (please tell us your name),
Your report query would look something like this (assuming page number is 1):
select some_column1, some_column2
from your_user_table
where username like :P1_INITIAL || '%'
For the letters at the top of the report, here's a couple options:
- If you want all letters to appear whether or not there are any rows, you can create a series of buttons or links, one for each letter, and specify the target URL to submit back to the report page, setting the item P1_INITIAL to each letter.
- If you want only letters that have rows, one way is to create a dynamic LOV based on a query like this:
select distinct upper(substr(username, 1, 1)) d, distinct upper(substr(username, 1, 1)) v
from your_user_table
order by upper(substr(username, 1, 1))
Then use that for a select list with submit, again targeting the report page and setting P1_INITIAL to the selected value.
Hope this helps (if it does, please reward it),
John

How to create a sharepoint list to add/change/delete the data in SQL server Table based on users inputs

I have a table in sql with employee_num and I need to create a list and link that list to this table to make changes to table based on values user enter or selects.

Hi,
In addition, you could refer to one similar thread for related information:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/8ee8a7b2-ddfc-4654-b84e-b062aeb527ae/how-to-create-exernal-list-in-sharepoint-which-fetch-data-from-multiple-sql-table?forum=sharepointgeneral
Regards,
Rebecca Tu
TechNet Community Support

How to create a new folder with a different name everyday

Hello everybody,
I have another question if you don't mind. But first thank you again to V.K and red menace for helping me with the my previous post.
This is actually the same project, I just keep on seeing new obstacles when I'm almost done.
Below is my workflow. My workflow is exporting a quicktime movie to a folder in our server.
What I need to do at the end is to move the exported file into a folder but a folder needs to be created and it has to change at about midnight everyday.
For example today the file will go to Server>Client folder>File folder named 09-04-2008
Then the next day, I need to put the new exported files to Server>Client folder>File folder named 09-05-2008.
First, how can I create a sequential named folders and second how can I tell Automator to put the files in the right folders. This process is a 24 hour process.
Thanks for you future help.
Helmut
1) Get Specified Finder Items (Pointing to File Folder)
2) Get Folder Contents (tried checked and uncheck on Repeat for each subfolder
3) Get Specified movie ( I guess Filter finder items and choose .mov will work too)
4) Quicktime Export (exporting it to the Exported Folder)
5) Get Specified Finder Items (Pointing to File folder to get to the original file)
6) Get Folder Contents
7) Filter Finder Items (choose .mov)
8) Move Finder Items ( pointing to Archive Folder to move the original file)
9) Get Specified Finder Items (Pointing to Exported Folder)
10) Get Folder Contents
11) Filter Finder Items (.mov)
12) Move Finder Items (Pointing to Server Folder)

It doesn't look like there is an easy way to do this. The sort and filter actions don't let you use variables, and I haven't found any actions that will alter a list. Making a text file with the name of the newest folder seems kind of clunky, but it is an option.
What I was thinking about was an action that would take the first item in a list - then you could get your backup folders, sort by creation date, and just take the top one in the list (the newest one). Hmmm - this should be fairly straight-forward, so maybe I'll write an action
In the mean time, give the Run AppleScript action in the following workflow a try.
Tested workflow:
1) Ask for Finder Items (Type: Folders)
2) Get Folder Contents
3) Sort Finder Items (by creation date in ascending order)
4) Run AppleScript (the following script)
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #FFDDFF;
overflow: auto;"
title="this text can be pasted into an Automator 'Run AppleScript' action">
on run {input, parameters}
return the first item in the input list
input: a list of anything
output: the first item, or {} if none or error
set output to {}
try
set the end of the output to the first item of the input
end try
return output
end run</pre>
5) View Results
The above workflow should return the newest item in the selected folder.

How to create a new app using existing Dev & Dist certificates

Okay, I have already created one app that has been approved by Apple. Now we're ready to create a second app and we're trying to create the .p12 certificates using the existing Apple Dev and Dist Certificates. For some reason we can not get the .p12 certificates for the new app to link up with the existing Apple Dev and Dist certificates. I don't understand what I'm missing. Any help would be appreciated. Thanks!

You must have 2 folders with the following :
Dev:
aps developer identify.CER
CertificateSigningRequest.certSigningReq
Certificats.P12 (already created for your previous app)
Certificats Push Dev.P12
Mobile Provision
Distri
aps prodution identify.CER
CertificateSigningRequest.certSigningReq
Certificats distri.P12 (already created for your previous app)
Certificats Push Prod/distri.P12
Mobile Provision
Try, you will know quickly if you havent do it well

How to create a new track with existing changes in the production

Similar Messages

Maybe you are looking for