How to disconnect internet connection in Time Capsule and reconnect without restarting the whole device?

Hi, I would be very grateful if someone could tell me how to disconnect internet connection in Time Capsule and reconnect without restarting the whole device?
The thing is that as I have a dynamic IP address, everytime I restart the internet connection my IP address changes. I sometimes need it to change, so I need to restart the connection. I don't know another way to restart the connection than restarting the whole Time Capsule.
Thanks!!
PD: the computer I use is Windows based, using the Airport Utility for Windows, but I also have a MacBook Pro I could use and an iPhone too.

The utility in windows is very like Mac so the screenshots are from Mac as I don't have windows available now.
How this works depends on the setup of the TC.. which you did not tell us.. you cannot change anything if you do not have the TC as the main router in the network.
So on the internet tab you need to share a public IP address.
On the next tab where you set IP address.
Click the renew IP address.
It might work.. and it might not.. the problem is you are not disconnecting the network.. sometimes the hard disconnection is required before the address will renew..
What about unplugging the WAN port.. then click renew the IP which will fail.. then plug the wan back in again.
In the end it is easier and faster to power cycle the TC.

Similar Messages

I would like to use my iPhone 6's wifi hotspot to provide Internet at home (I do not have home internet) via a Time Capsule which I currently use the TC simply as a home wifi network without Internet to enable things like printing wirelessly and back

I would like to use my iPhone 6's wifi hotspot to provide Internet at home (I do not have home internet) via a Time Capsule which I currently use the TC simply as a home wifi network without Internet to enable things like printing wirelessly and backing up data wirelessly via time machine.
I have a Mac Pro, iPhone 6, iPad, Apple TV and Time Capsule. No home Internet.
Is is possible to have my iPhone 6's wifi hotspot used to provide Internet to my wifi network on time capsule? Has anyone else had success doing this? I'm not a tech head and really know very little about things like this. Thanks. Jen

You can have a go using a wireless bridge.. eg the airport express will do this.. you can join it to the iphone wireless running as a hotspot.. and then plugged into the TC wan port.. the TC has to be setup in router mode.. so this is going to give you double NAT errors.. and of course errors for all the time the hotspot is turned off.. but it can work. However you might find it requires you to manually connect up each time.. If you are really going to try and do this you will manage it.. but how fiddly it becomes might put you off after a week.
You will chew up your 5GB very fast using any streaming media even radio. So be very careful to track the usage.
Apple should have built in the TC the ability to plug in a wireless 3G modem.. via the USB but Apple have ceased to do adventurous stuff.
If you give up the TC as main router there are plenty of better products on the market that will handle multiple wan connections.. !!

How can i clear a full time capsule and start again

how can i clear a full time capsule and start again

Open the airport utility .. Click on the TC.. click on edit and go to the Disks tab.
Click Erase Disk.
Choose quick erase.. it takes 2min to reformat the drive.

When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

When two or more devices conflict it typically means that the DHCP service is either misconfigured or is not running at all. DHCP provides IP addresses to local network clients.
Is your AirPort Express base station the only router in your current network configuration? That is, is it connected directly to an Internet modem and not to another router upstream of it?

Would like my macbook pro to only connect to time capsule and not to airport express that is extending network. Is there a way to do this?

I have a network set up with a main time capsule and airport express. The airport express is configured to extend network. While its fine for our iphones and ipad to connect to the express, I would like the Macbook pro to only connect to the time capsule as it seems to run faster. Any way to do this?

You are extending the 2.4ghz.. as that is the only way you can connect iphones.
But if you have Gen2 or later TC you can setup 5ghz to use a different wireless name to 2.4ghz.. and it is much faster.. you need to be close to the TC though.. like in the same room.
Make sure you download 5.6 airport utility if you haven't already.. go to the wireless options and the extra wireless area.. set a different wireless name (SSID in everybody but apple's book). Then you can deliberately select it.

Under Snow Leopard I used a WD My World NAS to back up my Mac Pro (Mid 2010). When I upgraded to Lion I am unable to access the backup because the NAS does not yet support AFP. I have now bought a Time Capsule and want to transfer the old backup onto it.

Under Snow Leopard I used a WD My World NAS to back up my Mac Pro (Mid 2010). When I upgraded to Lion I am unable to access the backup because the NAS does not yet support AFP. I have now bought a Time Capsule and want to transfer the old backup onto it.
How can I recover the NAS back up to put on my new Time Machine.
Talking to Apple Support Adviser was a waste of time on case number 239647273
Any thoughts or pointers?

Keep the old OS around and just kick the tires and test new OS. Apple has a history and habit of breaking support in things like this.
You can use TimeMachine as one level of backup, and even there there were changes with Lion, I would always recommend foremost backup clones of every volume. And clone (SuperDuper etc) can be stored on something like HP NAS Media Server which also was supporting TimeMachine, iTunes - until Apple made that harder and more their own proprietary format.
Apple AirPort Time Capsule Support
Lion Communities
Cloning as a Backup Strategy
Rather than "upgrade" I would clone the system, and do a clean install, then allow Setup Assistant to import your files.
Others who are asking the same question:
http://www.bing.com/search?q=mac+os+x+lion+WD+My+World+NAS

How can i can connect imac 24 pouce and macbook to use the screen of the imac ?

how can i can connect imac 24 pouce and macbook to use the screen of the imac ?

You can't. It requires a 2009 or later 27" iMac to use Target Display Mode. You could try using software like ScreenRecycler.

How to restart the Netweaver Server without restarting the whole OS (Suse)

We are setting up the SAP Netweaver Java on Suse Linux Trial in VMWare.
We require to restart the Netweaver Server several times. Is there a possibilty to restart the Netweaver Server without restarting the whole Suse Linux Server Operating System?

Hello Deniz,
startsap and stopsap have the folllowing syntax :
startsap [db|r3|j2ee|all|check] [<instance>]
you could use startsap/stopsap to start/stop any of the db or r3 or j2ee or any particular instance.
e.g.
startup db
startsap r3
startsap j2ee (just j2ee part)
similarly for stopsap
if you have multiple instance you could use the instance ABC as
startsap ABC
If you just want to restart any particular process of j2ee engine, you could use jcmon.
Hope that helps.
Snehal

How to delete a word mistake in a vocal track without deleting the whole track

How to delete a work mistake in a vocal track without deleting the whole track

jon w. (nichimyoun) wrote:
How to delete a work mistake in a vocal track without deleting the whole track
http://www.bulletsandbones.com/GB/GBFAQ.html#cutsection
(Let the page FULLY load. The link to your answer is at the top of your screen)

Make AirPort Extreme share internet connection with Time Capsule

Hello,
This is the situation: in one room there's an old Mac, the modem which delivers the internet and the AirPort Extreme which is connected to the modem.
In another room there's the Mac Pro, the Time Capsule which is connected to the Mac Pro with an ethernet cable and to a printer via USB.
I want the AirPort Extreme to wirelessly share it's internet connection with the Time Capsule so that the Time Capsule can share the printer with all three Macs (old Mac, Mac Pro and Macbook Pro), the Mac Pro can use the Time Capsule for Time Machine functionality and maybe the Macbook Pro too.
And just using the Time Capsule for internet.
How can I do this?
At the moment the AirPort Extreme is disconnected and the Time Capsule is used instead, but this way I can't share the printer...
Thanks!

Is that AirPort Extreme "flat" or dome-shaped? If it's flat (802.11n-capable), you should be able to configure the "main" router to "Allow this network to be extended" and the other to "Join a wireless network". If the Extreme is dome-shaped, then you need a more-complicated "WDS" arrangement. In either case it shouldn't matter much which router plays which role.
I'm not sure what you mean by "And just using the Time Capsule for internet."
Nathan-NL wrote:
At the moment the AirPort Extreme is disconnected and the Time Capsule is used instead, but this way I can't share the printer...
Is the printer connected to the USB port of the Time Capsule? Can you see the printer in the "Printer" panel of AirPort Utility? What happens when you try to use it from one of the Macs?

Xbox360 keeps droping internet connection to Time Capsule (Wired)

Hi there,
I seriously need your help with an ongoing issue that's been affecting my time capsule for a few weeks now. First of all, my Xbox360 is connected with a wire to my time capsule and now, it's pretty much impossible to play any games online. In Modern Warfare 2, I get horrible lag and after a game or two, the disconnected from xbox live appears and the only way for me to get back the connection is by unpluging the Time Capsule and restarting the Xbox. This gets me a good connection for 30-45 min and after that, same problem. I don't really know what could be causing this since I also lose connection while playing a single player game that doesn't require any incoming data. Sometimes, I just turn on the console, I see the xbox icon searching for an internet connection and then nothing.
I really need your input on this because everything else connected to my Time Capsule works perfectly (PS3 and Wii wireless and a Powerbook wired). The Powerbook never loses the connection.
I did a lot of search on the web and most problems between the 360 and Time Capsule seems to be wireless related. I did a few suggestions like completly resetting my Time Capsule and downgrading the firmware but nothing seems to be working. I don't understand what could be causing this because I never had any problems with my Xbox and Time capsule for close to 2 years now.
Sorry for the long post, hope you guys can help me! Thanks!

Anyone?

Sharing a modem internet connection through Time Capsule...?

Hi there, everyone. I'm hoping some of you can help me out with a networking issue. At my house, my only high-speed internet option is an Aircard of some sort (Sprint Sierra 595u, specifically), which (up until yesterday) i was sharing rather successfully in a wireless ad-hoc network consisting of my macbook pro, and 3 other windows machines. The computer with the modem is a Windows XP Home laptop.
Now, i realize the card cannot plug into the Time Capsule, and yes, i do know there are routers made specifically for this, but the Time Capsule would be great so i can have a backup device without hogging a USB port on my macbook.
at any rate, having done some research, it seems that the issue with using XP's Internet Sharing in addition to a separate router is that both are basically DNS servers (correct me please if i'm using incorrect terminology). I have read that i can do two things to bypass this problem: 1) disable DHCP on the Time Capsule, thereby making it an access point; or 2) put the "main" computer (with the modem on it) in a different subnet mask than the router and client computers.
I've been attempting option #2, but have had some troubles in the Airport Utility... one is that i cannot seem to find an option to set the Internet connection to a Static IP... also, when choosing a different subnet mask, what should i change it to? does it matter?
so, i realize this relies heavily on XP... sorry about that. any comments, recommendations, or words of wisdom would be most welcome.
Thanks and Happy Easter!

We don't know..
My pc can.. so I suspect you need something changed in the setup..
At the moment.. we have no info.. none.. nothing. Sorry but we cannot help remotely when the info is .. it don't work.
So.. what broadband do you have?
How is the TC setup? Router or bridge?
Is the pc connected by ethernet or wireless? If wireless please test with ethernet. Wireless is too problematic to be relied on.. at least to figure out the problem.
When you open a command window and type ipconfig /all please copy and paste the results here.
Then ping the TC address from command window. Does it respond?
Ping 8.8.8.8 Does it respond?

Slow internet connection with time capsule

The only way to have the real speed is in bridge mode, do anyone has a solution?

Hi all,
first of all please forgive my English but I'm sure you'll understand the below.
I bought a time capsule 3T recently and after 2-3 weeks I faced the same above problems with internet speed.
Everything was perfect in the beginning but twoo weeks later I couldn't browse the youtube site so imagine to watch a video.
The setup is:
ISDN modem>speedtouch adsl router> via ethernet timecapsule-bridge mode.
To the home network of timecapsule are connected one imac one macbook pro.
Since there were two wireless networks, the speedtouch and time capsule,
I decided to choose the speedtouch network for iphone and ipad.
After the problem with internet speed appeared for the imac and macbook,
I checked the connection through ipad and iphone and was perfect and very fast.
I was confused and I read all threads about the same problem.
So I decided to join the speedtouch network for imac too and to change network-to timecapsule-
whenever I need to backup to the timecapsule.
I was surprised to see that imac connected to timecapsule, without have joined its network
and also it was possible to enter timemachine without changing the already joined network
of speedtouch router.
I think that the connection is possible because timecapsule is connected via ethernet cable to the
speedtouch so the connection is something like "dublex" or "bidirectional" (I don't know how to write it)
Now the problem has been fixed, timemachine works perfect and the internet speed is fast
as before.
I hope this helps and let us know if will work for you.
cheers,
yiannis
athens greece

Windows internet connection with Time Capsule

I have recently installed an old version of Windows XP SP2 on my laptop using Bootcamp. It probably needs update. When I wanted to connect to the Internet using my Time Capsule, it didn't work. When I open wireless connections, it shows my TC with strong signal, but when I click "connect", I get the message something like "couldn't connect, you might be too far from device, refresh sources and try again". So far no luck if I unplug my TC and use LAN directly. Can I use TC as my wireless router in Windows mode? If yes, how can I set it up?

If I remove the ethernet cable and plug it straight into my iMac I have an immediate internet connection.
That is because your cable modem has "associated" with the iMac. You need for it to "forget" your iMac and "associate" with the Time Capsule. Here's how:
Completely power off the cable modem. This means pulling the power plug from the back of the modem or from the wall AC jack.
Power off every other device on the entire network. You can power them off in any order that you wish
Wait at least 15 minutes. Longer will not hurt at all.
Power up the cable modem and let it run for 2-3 minutes
Then, power up the Time Capsule the same way
Power up each network device one at a time about a minute apart
Check the network
If the Time Capsule still does not have an Internet connection, you will need to peform a Factory Default Reset on the device and then start the process above all over again. You will need to reconfigure the Time Capsule again, of course once everything is powered back up.
Resetting an AirPort Base Station or Time Capsule FAQ

Internet connection with Time Capsule

I have a new Time Capsule.
I have plugged in the ethernet link from my cable modem into the Time Capsule and set up a network and Time Machine has backed up my iMac successfully.
But I cannot get my Time Capsule to link to the internet.
If I remove the ethernet cable and plug it straight into my iMac I have an immediate internet connection.
If I plug my ethernet cable into my router I can get the internet via Wi-fi on my iMac.
How can I get an internet connection on my iMac using my Time Capsule?
Any ideas woiuld be very greatly apprecaited.

If I remove the ethernet cable and plug it straight into my iMac I have an immediate internet connection.
That is because your cable modem has "associated" with the iMac. You need for it to "forget" your iMac and "associate" with the Time Capsule. Here's how:
Completely power off the cable modem. This means pulling the power plug from the back of the modem or from the wall AC jack.
Power off every other device on the entire network. You can power them off in any order that you wish
Wait at least 15 minutes. Longer will not hurt at all.
Power up the cable modem and let it run for 2-3 minutes
Then, power up the Time Capsule the same way
Power up each network device one at a time about a minute apart
Check the network
If the Time Capsule still does not have an Internet connection, you will need to peform a Factory Default Reset on the device and then start the process above all over again. You will need to reconfigure the Time Capsule again, of course once everything is powered back up.
Resetting an AirPort Base Station or Time Capsule FAQ

How to disconnect internet connection in Time Capsule and reconnect without restarting the whole device?

Similar Messages

Maybe you are looking for