How to Divert the changes to cdhdr table instead of dbtablog?

Hai everybody.
I am new to this forum. i got a job in abap recently. The below is my requirement.I want solution for this one. Anybody plz help me.
I am having ztransaction.
The change logs already were captured in DBTABLOG for table ZWPRFRUND (in transaction ZWPG).
The only report which is currently used to get the change logs is RSVTPROT
Now my requirement is,
we need to display the change logs in the form of ALV.
We should divert the changes to CDHDR table instead of DBTABLOG, then we can use the RSSCD100 to display change logs.
The Important items for the change LOG needed in case of changes to table in ZWPG are,DATE ,TIME,USER,FIRST NAME,FILED NAME,OLD VALUE,NEW VALUE
The above fields need to be displayed in the grid. In the above list FIELD NAME denotes any field of the table in the transaction in ZWPG
Thanks & Regards,
Sujatha.T.

Check out my post in this thread:
How to record add-on table change logs?
You need to define a change document type and generate relevant code for this.
Andrew

Similar Messages

How to track the changes to a table and update the other table ?

Hi Guys,
I am looking to track deletion of entries on KONV table and sync these missing entries in an other table which has primary key entries of KONV.
How to do this.. is ALE change pointer is any good for this purpose ?
Thanks
AJ

Hi Sam,
In order to track the changes in the KONV table, go to table CDHDR and give objectclass and objectid, you will get all the details.
Regards,
ramesh.

How to pick the changed name.

Hi all,
        can anyone help me out ...how to pick the changed name form the table ... if a name changed
        three times in month, how should I get it in report.???
        I have gone through the tables BUT000 & BUT020 but I haven't got thr trick.
        can you please help me.
Thanks & Regards,
Rajeev

Hi
You can refer to CDHDR, CDPOS tables as When you change the Object change document get created
You can put BP number in Object ID
You can view this change documents in FPP3
Extras-> Change History
Regards,
Prajakta
Edited by: Prajakta Shringarpure on May 18, 2009 12:55 PM

How to use the change log in ODS to track Delta change?

People say that historical data (like Delta change) in ODS can be tracked in the Change Log. How to use the change log to track historic data?
Thanks

Kevin
See if it helps
Every ODS object is represented on the database by three transparent tables:
Active data: A table containing the active data (A table)
Activation queue: For saving ODS data records that are to be updated but that have not yet been activated. The data is deleted after the records have been activated.
<b>Change log: Contains the change history for delta updating from the ODS Object into other data targets, such as ODS Objects or InfoCubes for example.</b>
An exception is the transactional ODS object, which is only made up of the active data table.
The tables containing active data are constructed according to the ODS object definition, meaning that key fields and data fields are specified when the ODS object is defined. Activation queue and change log are the same in the tables structure. They have the request ID, package ID and the record number as a key.
Data base structure changes
http://help.sap.com/saphelp_nw04/helpdata/en/d2/d53ec3efdc9b47a9502c3a4565320c/frameset.htm
Hope this helps
Thnaks
Sat

How to restrict the change access in CRM for OLTP orders

Hi Guru's,
Please let me know how to restrict the change access in CRM for the orders that are created in ECC. The ECC orders will only for display in CRM but not for change,
We have the orders that are created in ECC, it will flows to CRM and should restrict the access to get in to the change mode in CRM but as of now CRM system is allowing change mode for ECC orders and ending up with errors.
Is there any additional middleware parameter that needs to be added to SMOFPARSFA table to get this functionality! Please advice! Thank your for your help.
Regards
Suneel

Hi.
You can use the PFCG role to control if the user is able to create, change, delete or only display a business transaction type.
Regards.

How to find the Changes like functional location category

Hi Experts,
Can anyone guide me as to how to get the changes in Func loc category made for a func location through front end transactions or through tables when the Change document check box for Func location category has been activated and/or not activated.
Faster response will be highly appreciated and rewarded.
Regards,
Manish

Hi,
Go to that Functional Location, Extras -> Display Changes, that will display all the changes made on that FL.
Regards,
Maheswaran.

How to find the deleted data in tables

guys,
how to find the deleted data in tables example: i want to see whether anyone deleted data in MB5B report tables like mbew, etc.,
regards,

Hi,
MBEWH is actually the history table of MBEW. It will record all the changes. As I have told you earlier if you have deleted the record dirctly from the table then it will not come even in the table MBEWH
That means no changes have been made.
regards

How to manage the space between a table and its title?

Have tables where titles are very close to the main text and need a couple of points to separate these elements. How to reshape this space?
1. Titles were separated by a return that is not visible... (any code is revealed by ID)
2. When a Return is inserted after the title, nothing happens aparently, but this return is now visible and could be used as a «paragraph space after» value:
3. A solution could be Grep to catch the end of paragraph assigned to titles to insert a return;
but Grep only catches the right border of the table (the yellow mark shows the big blinking cursor);
Grep cannot see the end of paragraph in the tables's title.
It another method?
Basically, how to modify the space between a table and ists title

I think you and Bob are not in synch here.
Bob suggested that you could use paragraph spacing, but for that to work you do need to use separate paragraphs for the title and table, which you don't seem to be doing. Using GREP to find the end of the paragraph only works if there IS and end to the paragraph. As far as I know there is now meta-character to use in Find/Change that would allow you to find a table and insert a paragraph break ahead of it, but I bet it could be scripted.
I'm not quite sure what you were trying to find in the GREP you posted. Did you actually have a paragraph return inserted already after the title? In that case you only need to redefine the style for that paragraph to add the space (or redefine the style for the paragraph that holds the table itself). You don't need the GREP. But the reason it does nothing is that you've found a location -- the end of the paragraph, but haven't found any actual text to modify. To do anything you would need to use something like .$
But back to NOT having a separate paragraph... If you put the cursor in any table cell and go to Table Options > Table Setup tab you'll see fields to set space before and after the table that should do what you want. That was the second part of what he posted.

Tracking the changes in HRP tables for sending thru IDOC

Hi ALL,
We are planning to send iDoc to another SAP system with HR Data from different HRP tables. HRP1000,HRP1001,HRP1005,HRP1008,HRP1013,HRP1050 etc
If we change any PA infotypes they are linked to pernr and we can easily track the changes but if there is any change in HRP tables how do we track the changes and send them thru idoc.
Thanks
Bala Duvvuri

Kiran,
I am planning to use tocde PFAL for both inital loads and delta loads of HR data to other system .Can i get all the changes for HRP tables in PFAL without custom programming?
Let me explain with an example.
I changed the text for one of the org units and I can see the changes in HRP1000.but how will i send this data to another SAP system using PFAL ,how will i track those changes.
I heard that we can enable change pointers on each and every field in all the infotypes,so when i change the org unit text and it is one of the field in PA0001 of every employee a change pointer is triggered .is that true
Thanks
Bala Duvvuri
Edited by: Bala Duvvuri on May 16, 2010 8:33 AM

How to retrieve the values from a table if they differ in Unit of Measure

How to retrieve the values from a table if they differ in Unit of Measure?

If no data is read
- Insure that you use internal code in SELECT statement, check via SE16 desactivating conversion exit on table T006A. ([ref|http://help.sap.com/saphelp_nw70/helpdata/en/2a/fa0122493111d182b70000e829fbfe/frameset.htm])
If no quanity in result internal table
- There is no adqntp field in the internal table, so no quantity is copied in itab ([ref|http://help.sap.com /abapdocu_70/en/ABAPINTO_CLAUSE.htm#&ABAP_ALTERNATIVE_1@1@]).
- - Remove the CORRESPONDING, so quantity will fill the first field adqntp1. ([ref|http://help.sap.com/abapdocu_70/en/ABENOPEN_SQL_WA.htm])
- - Then loop at the internal table and move the quantity when necessary to the 2 other fields.
* Fill the internal table
SELECT msehi adqntp
INTO TABLE internal table
FROM lipso2
WHERE vbeln = wrk_doc1
    AND msehi IN ('KL','K15','MT').
* If required move the read quantity in the appropriate column.
LOOP AT internal_table ASSIGNING <fs>.
CASE <fs>-msehi.
    WHEN 'K15'.
      <fs>-adqnt2 = <fs>-adqnt1.
      CLEAR <fs>-adqnt1.
    WHEN 'MT'.
      <fs>-adqnt3 = <fs>-adqnt1.
      CLEAR <fs>-adqnt1.
ENDCASE.
ENDLOOP.
- You could also create another table with only fields msehi and adqntp and then collect ([ref|http://help.sap.com/abapdocu_70/en/ABAPCOLLECT.htm]) the data to another table.
Regards,
Raymond

How to get the data from Pooled Table T157E.

Hi Experts,
How to get the data from Pooled Table T157E.
Any help.
Thanks in Advance,
Ur's Harsha.

create some internal table similar to T157E and pass all data as per SPRAS.
After that use internal table in your program as per the requirement.
Regds,
Anil

How to delete the data from partition table

Hi all,
Am very new to partition concepts in oracle..
here my question is how to delete the data from partition table.
is the below query will work ?
delete from table1 partition (P_2008_1212)
we have define range partition ...
or help me how to delete the data from partition table.
Thanks
Sree

874823 wrote:
delete from table1 partition (P_2008_1212)This approach is wrong - as Andre pointed, this is not how partition tables should be used.
Oracle supports different structures for data and indexes. A table can be a hash table or index organised table. It can have B+tree index. It can have bitmap indexes. It can be partitioned. Etc.
How the table implements its structure is a physical design consideration.
Application code should only deal with the logical data structure. How that data structure is physically implemented has no bearing on application. Does your application need to know what the indexes are and the names of the indexes,in order to use a table? Obviously not. So why then does your application need to know that the table is partitioned?
When your application code starts referring directly to physical partitions, it needs to know HOW the table is partitioned. It needs to know WHAT partitions to use. It needs to know the names of the partitions. Etc.
And why? All this means is increased complexity in application code as this code now needs to know and understand the physical data structure. This app code is now more complex, has more moving parts, will have more bugs, and will be more complex to maintain.
Oracle can take an app SQL and it can determine (based on the predicates of the SQL), which partitions to use and not use for executing that SQL. All done totally transparently. The app does not need to know that the table is even partitioned.
This is a crucial concept to understand and get right.

How to hide the data in particular table in oracle 10g

How to hide the data in particular table in oracle 10g
i want steps

If its on Report u can always hide the column - Keyfigure or Selection - Display - Hide......y do u want to have it on the report if it is to be hided in the first place?

How to sum the column in a table seperated by sign.

How to sum the column in a table separate by sign.
For Example:
A B
10 MOHAN
-15 KUMAR
-25 MARCH
50 MAY

SELECT SUM(CASE SIGN(A) WHEN 1 THEN A ELSE NULL END) SUM_POSTIIVE,
SUM(CASE SIGN(A) WHEN -1 THEN A ELSE NULL END) SUM_NEGATIIVE
FROM tbl
/SY.

How to update the data in sqlserver table using procedure in biztalkserver

Hi,
Please can any one answer this below question
how to update the data in sqlserver table using procedure in biztalkserver
while am using executescalar,typedprocedure getting some warning
Warning:The adapter failed to transmit message going to send port "SendtoSql1" with URL "mssql://nal126//MU_Stage2?". It will be retransmitted after the retry interval specified for this Send Port. Details
Please send me asap....
Thanks...

Hi Messip,
A detailed error would have helped us to answer you more appropriately but
You can follow the post which has step by step instructions, to understand how to use Stored Procedure:
http://tech-findings.blogspot.in/2013/07/insert-records-in-sql-server-using-wcf.html
Maheshkumar
S Tiwari|User
Page|Blog|BizTalk
2013: Inserting RawXML (Whole Incoming XML Message) in SQL database

How to Divert the changes to cdhdr table instead of dbtablog?

Similar Messages

Maybe you are looking for